Add qinq through xconnect tests.

Change-Id: Ia20f5959dab41290bf60490ead830f0e37ecff0d
Signed-off-by: Patrik Hrnciar <phrnciar@cisco.com>

1 files changed, 140 insertions, 0 deletions

diff --git a/resources/libraries/robot/tagging.robot b/resources/libraries/robot/tagging.robot
new file mode 100644
index 0000000000..e0f26a5938
--- /dev/null
+++ b/resources/libraries/robot/tagging.robot
@@ -0,0 +1,140 @@
+# Copyright (c) 2016 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Documentation | Keywords for VLAN tests
+| Resource | resources/libraries/robot/default.robot
+| Resource | resources/libraries/robot/l2_xconnect.robot
+| Library | resources.libraries.python.L2Util
+| Library | resources.libraries.python.InterfaceUtil
+| Library | resources.libraries.python.NodePath
+
+*** Keywords ***
+
+| Node path computed for 3-node topology
+| | [Arguments] | ${TG} | ${DUT1} | ${DUT2} | ${TG}
+| | [Documentation] | *Create interface variables for 3-node topology.*
+| | ...
+| | ... | *Arguments:*
+| | ... | - ${TG} - Node attached to the path. Type: dictionary
+| | ... | - ${DUT1} - Node attached to the path. Type: dictionary
+| | ... | - ${DUT2} - Node attached to the path. Type: dictionary
+| | ...
+| | ... | _Set testcase variables for nodes and interfaces._
+| | ... | - ${tg} - Variable for node in path. Type: dictionary
+| | ... | - ${dut1} - Variable for node in path. Type: dictionary
+| | ... | - ${dut2} - Variable for node in path. Type: dictionary
+| | ... | - ${tg_if1} - First interface of TG node. Type: str
+| | ... | - ${tg_if2} - Second interface of TG node. Type: str
+| | ... | - ${dut1_if1} - First interface of first DUT node. Type: str
+| | ... | - ${dut1_if2} - Second interface of first DUT node. Type: str
+| | ... | - ${dut2_if1} - First interface of second DUT node. Type: str
+| | ... | - ${dut2_if2} - Second interface of second DUT node. Type: str
+| | ...
+| | Append Nodes | ${TG} | ${DUT1} | ${DUT2} | ${TG}
+| | Compute Path
+| | ${tg_if1} | ${tg}= | Next Interface
+| | ${dut1_if1} | ${dut1}= | Next Interface
+| | ${dut1_if2} | ${dut1}= | Next Interface
+| | ${dut2_if1} | ${dut2}= | Next Interface
+| | ${dut2_if2} | ${dut2}= | Next Interface
+| | ${tg_if2} | ${tg}= | Next Interface
+| | Set Test Variable | ${tg}
+| | Set Test Variable | ${tg_if1}
+| | Set Test Variable | ${tg_if2}
+| | Set Test Variable | ${dut1}
+| | Set Test Variable | ${dut1_if1}
+| | Set Test Variable | ${dut1_if2}
+| | Set Test Variable | ${dut2}
+| | Set Test Variable | ${dut2_if1}
+| | Set Test Variable | ${dut2_if2}
+
+| Interfaces in path are up
+| | [Documentation] | *Set UP state on interfaces in path on nodes.*
+| | ...
+| | Set Interface State | ${tg} | ${tg_if1} | up
+| | Set Interface State | ${tg} | ${tg_if2} | up
+| | Set Interface State | ${dut1} | ${dut1_if1} | up
+| | Set Interface State | ${dut1} | ${dut1_if2} | up
+| | Set Interface State | ${dut2} | ${dut2_if1} | up
+| | Set Interface State | ${dut2} | ${dut2_if2} | up
+| | Vpp Node Interfaces Ready Wait | ${dut1}
+| | Vpp Node Interfaces Ready Wait | ${dut2}
+
+| VLAN subinterfaces initialized on 3-node topology
+| | [Arguments] | ${DUT1} | ${INT1} | ${DUT2} | ${INT2} | ${SUB_ID}
+| | ...         | ${OUTER_VLAN_ID} | ${INNER_VLAN_ID} | ${TYPE_SUBIF}
+| | [Documentation] | *Create two subinterfaces on DUTs.*
+| | ...
+| | ... | *Arguments:*
+| | ... | - ${DUT1} - Node to add sub-interface.
+| | ... | - ${INT1} - Interface name on which create sub-interface.
+| | ... | - ${DUT2} - Node to add sub-interface.
+| | ... | - ${INT2} - Interface name on which create sub-interface.
+| | ... | - ${SUB_ID} - ID of the sub-interface to be created.
+| | ... | - ${OUTER_VLAN_ID} - Outer VLAN ID.
+| | ... | - ${INNER_VLAN_ID} - Inner VLAN ID.
+| | ... | - ${TYPE_SUBIF} - Type of sub-interface.
+| | ...
+| | ... | _Set testcase variables with name and index of created interfaces:_
+| | ... | - ${subif_name_1}
+| | ... | - ${subif_index_1}
+| | ... | - ${subif_name_2}
+| | ... | - ${subif_index_2}
+| | ...
+| | ${subif_name_1} | ${subif_index_1}= | Create subinterface | ${DUT1}
+| | ...                                 | ${INT1} | ${SUB_ID}
+| | ...                                 | ${OUTER_VLAN_ID} | ${INNER_VLAN_ID}
+| | ...                                 | ${TYPE_SUBIF}
+| | ${subif_name_2} | ${subif_index_2}= | Create subinterface | ${DUT2}
+| | ...                                 | ${INT2} | ${SUB_ID}
+| | ...                                 | ${OUTER_VLAN_ID} | ${INNER_VLAN_ID}
+| | ...                                 | ${TYPE_SUBIF}
+| | Set Interface State | ${DUT1} | ${subif_index_1} | up
+| | Set Interface State | ${DUT2} | ${subif_index_2} | up
+| | Set Test Variable | ${subif_name_1}
+| | Set Test Variable | ${subif_index_1}
+| | Set Test Variable | ${subif_name_2}
+| | Set Test Variable | ${subif_index_2}
+
+| L2 tag rewrite pop 2 tags setup on interfaces
+| | [Arguments] | ${DUT1} | ${SUB_INT1} | ${DUT2} | ${SUB_INT2}
+| | ...         | ${TAG_REWRITE_METHOD}
+| | [Documentation] | *Setup tag rewrite on sub-interfaces on DUTs.*
+| | ...
+| | ... | *Arguments:*
+| | ... | - ${DUT1} - Node to rewrite tags.
+| | ... | - ${SUB_INT1} - Interface on which rewrite tags.
+| | ... | - ${DUT2} - Node to rewrite tags.
+| | ... | - ${SUB_INT2} - Interface on which rewrite tags.
+| | ... | - ${TAG_REWRITE_METHOD} - Method of tag rewrite.
+| | ...
+| | L2 tag rewrite | ${DUT1} | ${SUB_INT1} | ${TAG_REWRITE_METHOD}
+| | L2 tag rewrite | ${DUT2} | ${SUB_INT2} | ${TAG_REWRITE_METHOD}
+
+| Interfaces and VLAN sub-interfaces inter-connected using L2-xconnect
+| | [Arguments] | ${DUT1} | ${INT1} | ${SUB_INT1}
+| | ...         | ${DUT2} | ${INT2} | ${SUB_INT2}
+| | [Documentation] | *Add interface and subinterface to bidirectional
+| | ...             | L2-xconnect on DUTs.*
+| | ...
+| | ... | *Arguments:*
+| | ... | - ${DUT1} - Node to add bidirectional cross-connect.
+| | ... | - ${INT1} - Interface to add to the cross-connect.
+| | ... | - ${SUB_INT1} - Sub-interface to add to the cross-connect.
+| | ... | - ${DUT2} - Node to add bidirectional cross-connect.
+| | ... | - ${INT2} - Interface to add to the cross-connect.
+| | ... | - ${SUB_INT2} - Sub-interface to add to the cross-connect.
+| | ...
+| | L2 setup xconnect on DUT | ${DUT1} | ${INT1} | ${SUB_INT1}
+| | L2 setup xconnect on DUT | ${DUT2} | ${INT2} | ${SUB_INT2}