CSIT-233 IPv4 IPFIX - baseline tests

 - add scapy classes for parsing IPFIX packets
 - add vat scripts and keywords for settings up IPFIX
 - add IPv4 IPFIX test suite

Change-Id: I80ab76ca361c7920a01a46ad720b1c04acd0d147
Signed-off-by: selias <samelias@cisco.com>

1 files changed, 67 insertions, 0 deletions

diff --git a/resources/libraries/robot/ipfix.robot b/resources/libraries/robot/ipfix.robot
new file mode 100644
index 0000000000..a5adacfc0f
--- /dev/null
+++ b/resources/libraries/robot/ipfix.robot
@@ -0,0 +1,67 @@
+# Copyright (c) 2016 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+"""Traffic keywords"""
+
+*** Settings ***
+| Library | resources.libraries.python.TrafficScriptExecutor
+| Library | resources.libraries.python.InterfaceUtil
+| Resource | resources/libraries/robot/default.robot
+| Documentation | Traffic keywords
+
+*** Keywords ***
+| Send packets and verify IPFIX
+| | [Documentation] | Send simple TCP or UDP packets from source interface\
+| | ... | to destination interface. Listen for IPFIX flow report on source\
+| | ... | interface and verify received report against number of packets sent.
+| | ...
+| | ... | *Arguments:*
+| | ...
+| | ... | - tg_node - TG node. Type: dictionary
+| | ... | - dst_node - Destination node. Type: dictionary
+| | ... | - src_int - Source interface. Type: string
+| | ... | - dst_int - Destination interface. Type: string
+| | ... | - src_ip - Source IP address. Type: string
+| | ... | - dst_ip - Destination IP address. Type: string
+| | ... | - protocol - TCP or UDP (Optional, default is TCP). Type: string
+| | ... | - port - Source and destination ports to use
+| | ... | (Optional, default is port 20). Type: integer
+| | ... | - count - Number of packets to send
+| | ... | (Optional, default is one packet). Type: integer
+| | ... | - timeout - Timeout value in seconds (Optional, default is 10 sec).
+| | ... | Should be at least twice the configured IPFIX flow report interval.
+| | ... | Type: integer
+| | ...
+| | ... | *Return:*
+| | ...
+| | ... | - No value returned
+| | ...
+| | ... | *Example:*
+| | ...
+| | ... | \| Send packets and verify IPFIX \| ${nodes['TG']} | ${nodes['DUT1']}\
+| | ... | \| eth1 \| GigabitEthernet0/8/0 \| 16.0.0.1 \| 192.168.0.2 \| UDP \
+| | ... | \| ${20} \| ${5} \| ${10} \|
+| | ... |
+| | [Arguments] | ${tg_node} | ${dst_node} | ${src_int} | ${dst_int} |
+| | ... | ${src_ip} | ${dst_ip} | ${protocol}=tcp | ${port}=20 | ${count}=1
+| | ... | ${timeout}=${10}
+| | ${src_mac}= | Get Interface Mac | ${tg_node} | ${src_int}
+| | ${dst_mac}= | Get Interface Mac | ${dst_node} | ${dst_int}
+| | ${src_int_name}= | Get interface name | ${tg_node} | ${src_int}
+| | ${dst_int_name}= | Get interface name | ${dst_node} | ${dst_int}
+| | ${args}= | Traffic Script Gen Arg | ${dst_int_name} | ${src_int_name}
+| | ... | ${src_mac} | ${dst_mac} | ${src_ip} | ${dst_ip}
+| | ${args}= | Set Variable
+| | ... | ${args} --protocol ${protocol} --port ${port} --count ${count}
+| | Run Traffic Script On Node | ipfix_check.py | ${tg_node} | ${args}
+| | ... | ${timeout}