CSIT-748 vnf-agent integration

CSIT-773 Implement RF keywords for k8s

- Implementation of Test Suite Setup for Ligato vnf-agent testing
- Implementation of KubernetesUtil for controlling kubectl
- Yaml templates for L2XC topology with 1cswitch and 1cnf
- Yaml templates for L2BD topology with 1cswitch and 1cnf
- ligato bootstrap script for creating vnf-agent image

Change-Id: Iebefde0eb984a27a0afcdf29fe549ca4edf8a61e
Signed-off-by: Peter Mikus <pmikus@cisco.com>

9 files changed, 579 insertions, 106 deletions

diff --git a/resources/libraries/bash/k8s_setup.sh b/resources/libraries/bash/k8s_setup.sh
new file mode 100755
index 0000000000..0649c711c6
--- /dev/null
+++ b/resources/libraries/bash/k8s_setup.sh
@@ -0,0 +1,54 @@
+#!/bin/bash
+# Copyright (c) 2017 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+set -xo pipefail
+
+SCRIPT_DIR="$( cd "$( dirname "${BASH_SOURCE[0]}" )" && pwd )"
+
+K8S_CALICO="${SCRIPT_DIR}/../../templates/kubernetes/calico_v2.4.1.yaml"
+K8S_CSIT="${SCRIPT_DIR}/../../templates/kubernetes/csit.yaml"
+
+trap "sudo kubeadm reset && sudo rm -rf $HOME/.kube" ERR
+
+# Revert any changes made to this host by 'kubeadm init' or 'kubeadm join'
+sudo kubeadm reset && sudo rm -rf $HOME/.kube || \
+    { echo "Failed to reset kubeadm"; exit 1; }
+
+# Ret up the Kubernetes master
+sudo -E kubeadm init --token-ttl 0 --pod-network-cidr=192.168.0.0/16 || \
+    { echo "Failed to init kubeadm"; exit 1; }
+
+# Make cgroup non-exclusive for CPU and MEM
+sudo cgset -r cpuset.cpu_exclusive=0 /kubepods
+sudo cgset -r cpuset.mem_exclusive=0 /kubepods
+
+rm -rf $HOME/.kube
+mkdir -p $HOME/.kube
+sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config
+sudo chown $(id -u):$(id -g) $HOME/.kube/config
+
+# Apply resources
+kubectl apply -f ${K8S_CALICO}  || \
+    { echo "Failed to apply Calico resources"; exit 1; }
+kubectl apply -f ${K8S_CSIT}  || \
+    { echo "Failed to apply CSIT resource"; exit 1; }
+
+# Update the taints
+kubectl taint nodes --all node-role.kubernetes.io/master- || \
+    { echo "Failed to taint nodes"; exit 1; }
+
+# Dump Kubernetes objects ...
+kubectl get all --all-namespaces
+
+echo Kubernetes is ready
diff --git a/resources/libraries/python/ContainerUtils.py b/resources/libraries/python/ContainerUtils.py
index fb2695fe44..b56fb0dc24 100644
--- a/resources/libraries/python/ContainerUtils.py
+++ b/resources/libraries/python/ContainerUtils.py
@@ -12,7 +12,7 @@
 # limitations under the License.
 
 # Bug workaround in pylint for abstract classes.
-#pylint: disable=W0223
+# pylint: disable=W0223
 
 """Library to manipulate Containers."""
 
@@ -93,11 +93,12 @@ class ContainerManager(object):
 
     def construct_containers(self, **kwargs):
         """Construct 1..N container(s) on node with specified name.
+
         Ordinal number is automatically added to the name of container as
         suffix.
 
-        :param kwargs: Name of container.
-        :param kwargs: str
+        :param kwargs: Named parameters.
+        :param kwargs: dict
         """
         name = kwargs['name']
         for i in range(kwargs['count']):
@@ -311,7 +312,6 @@ class ContainerEngine(object):
         # Create config instance
         vpp_config = VppConfigGenerator()
         vpp_config.set_node(self.container.node)
-        vpp_config.set_config_filename(config_filename)
         vpp_config.add_unix_cli_listen()
         vpp_config.add_unix_nodaemon()
         vpp_config.add_unix_exec('/tmp/running.exec')
@@ -326,15 +326,15 @@ class ContainerEngine(object):
         self.execute('mkdir -p /etc/vpp/')
         self.execute('echo "{c}" | tee {f}'
                      .format(c=vpp_config.get_config_str(),
-                             f=vpp_config.get_config_filename()))
+                             f=config_filename))
 
-    def create_vpp_exec_config(self, vat_template_file, **args):
+    def create_vpp_exec_config(self, vat_template_file, **kwargs):
         """Create VPP exec configuration on container.
 
         :param vat_template_file: File name of a VAT template script.
-        :param args: Parameters for VAT script.
+        :param kwargs: Parameters for VAT script.
         :type vat_template_file: str
-        :type args: dict
+        :type kwargs: dict
         """
         vat_file_path = '{p}/{f}'.format(p=Constants.RESOURCES_TPL_VAT,
                                          f=vat_template_file)
@@ -342,7 +342,7 @@ class ContainerEngine(object):
         with open(vat_file_path, 'r') as template_file:
             cmd_template = template_file.readlines()
             for line_tmpl in cmd_template:
-                vat_cmd = line_tmpl.format(**args)
+                vat_cmd = line_tmpl.format(**kwargs)
                 self.execute('echo "{c}" >> /tmp/running.exec'
                              .format(c=vat_cmd.replace('\n', '')))
 
@@ -354,6 +354,28 @@ class ContainerEngine(object):
         """Check if container is present."""
         raise NotImplementedError
 
+    def _configure_cgroup(self, name):
+        """Configure the control group associated with a container.
+
+        :param name: Name of cgroup.
+        :type name: str
+        :raises RuntimeError: If applying cgroup settings via cgset failed.
+        """
+        ret, _, _ = self.container.ssh.exec_command_sudo(
+            'cgcreate -g cpuset:/{name}'.format(name=name))
+        if int(ret) != 0:
+            raise RuntimeError('Failed to copy cgroup settings from root.')
+
+        ret, _, _ = self.container.ssh.exec_command_sudo(
+            'cgset -r cpuset.cpu_exclusive=0 /{name}'.format(name=name))
+        if int(ret) != 0:
+            raise RuntimeError('Failed to apply cgroup settings.')
+
+        ret, _, _ = self.container.ssh.exec_command_sudo(
+            'cgset -r cpuset.mem_exclusive=0 /{name}'.format(name=name))
+        if int(ret) != 0:
+            raise RuntimeError('Failed to apply cgroup settings.')
+
 
 class LXC(ContainerEngine):
     """LXC implementation."""
@@ -363,8 +385,7 @@ class LXC(ContainerEngine):
         super(LXC, self).__init__()
 
     def acquire(self, force=True):
-        """Acquire a privileged system object where configuration is stored and
-        where user information can be stored.
+        """Acquire a privileged system object where configuration is stored.
 
         :param force: If a container exists, destroy it and create a new
         container.
@@ -398,6 +419,7 @@ class LXC(ContainerEngine):
             if int(ret) != 0:
                 raise RuntimeError('Failed to write {c.name} config.'
                                    .format(c=self.container))
+        self._configure_cgroup('lxc')
 
     def create(self):
         """Create/deploy an application inside a container on system.
@@ -415,13 +437,25 @@ class LXC(ContainerEngine):
             raise RuntimeError('Failed to start container {c.name}.'
                                .format(c=self.container))
         self._lxc_wait('RUNNING')
-        self._lxc_cgroup(state_object='cpuset.cpus',
-                         value=cpuset_cpus)
+
+        # Workaround for LXC to be able to allocate all cpus including isolated.
+        cmd = 'cgset --copy-from / lxc/'
+        ret, _, _ = self.container.ssh.exec_command_sudo(cmd)
+        if int(ret) != 0:
+            raise RuntimeError('Failed to copy cgroup to LXC')
+
+        cmd = 'lxc-cgroup --name {c.name} cpuset.cpus {cpus}'\
+            .format(c=self.container, cpus=cpuset_cpus)
+        ret, _, _ = self.container.ssh.exec_command_sudo(cmd)
+        if int(ret) != 0:
+            raise RuntimeError('Failed to set cpuset.cpus to container '
+                               '{c.name}.'.format(c=self.container))
 
     def execute(self, command):
-        """Start a process inside a running container. Runs the specified
-        command inside the container specified by name. The container has to
-        be running already.
+        """Start a process inside a running container.
+
+        Runs the specified command inside the container specified by name. The
+        container has to be running already.
 
         :param command: Command to run inside container.
         :type command: str
@@ -530,33 +564,6 @@ class LXC(ContainerEngine):
             raise RuntimeError('Failed to wait for state "{s}" of container '
                                '{c.name}.'.format(s=state, c=self.container))
 
-    def _lxc_cgroup(self, state_object, value=''):
-        """Manage the control group associated with a container.
-
-        :param state_object: Specify the state object name.
-        :param value: Specify the value to assign to the state object. If empty,
-        then action is GET, otherwise is action SET.
-        :type state_object: str
-        :type value: str
-        :raises RuntimeError: If getting/setting state of a container failed.
-        """
-        cmd = 'lxc-cgroup --name {c.name} {s} {v}'\
-            .format(c=self.container, s=state_object, v=value)
-
-        ret, _, _ = self.container.ssh.exec_command_sudo(
-            'cgset --copy-from / lxc')
-        if int(ret) != 0:
-            raise RuntimeError('Failed to copy cgroup settings from root.')
-
-        ret, _, _ = self.container.ssh.exec_command_sudo(cmd)
-        if int(ret) != 0:
-            if value:
-                raise RuntimeError('Failed to set {s} of container {c.name}.'
-                                   .format(s=state_object, c=self.container))
-            else:
-                raise RuntimeError('Failed to get {s} of container {c.name}.'
-                                   .format(s=state_object, c=self.container))
-
 
 class Docker(ContainerEngine):
     """Docker implementation."""
@@ -584,6 +591,7 @@ class Docker(ContainerEngine):
         if int(ret) != 0:
             raise RuntimeError('Failed to create container {c.name}.'
                                .format(c=self.container))
+        self._configure_cgroup('docker')
 
     def create(self):
         """Create/deploy container.
@@ -613,7 +621,7 @@ class Docker(ContainerEngine):
 
         cmd = 'docker run '\
             '--privileged --detach --interactive --tty --rm '\
-            '--cgroup-parent lxc {cpuset_cpus} {cpuset_mems} {publish} '\
+            '--cgroup-parent docker {cpuset_cpus} {cpuset_mems} {publish} '\
             '{env} {volume} --name {container.name} {container.image} '\
             '{command}'.format(cpuset_cpus=cpuset_cpus, cpuset_mems=cpuset_mems,
                                container=self.container, command=command,
@@ -627,9 +635,10 @@ class Docker(ContainerEngine):
         self.info()
 
     def execute(self, command):
-        """Start a process inside a running container. Runs the specified
-        command inside the container specified by name. The container has to
-        be running already.
+        """Start a process inside a running container.
+
+        Runs the specified command inside the container specified by name. The
+        container has to be running already.
 
         :param command: Command to run inside container.
         :type command: str
@@ -731,12 +740,26 @@ class Container(object):
         pass
 
     def __getattr__(self, attr):
+        """Get attribute custom implementation.
+
+        :param attr: Attribute to get.
+        :type attr: str
+        :returns: Attribute value or None.
+        :rtype: any
+        """
         try:
             return self.__dict__[attr]
         except KeyError:
             return None
 
     def __setattr__(self, attr, value):
+        """Set attribute custom implementation.
+
+        :param attr: Attribute to set.
+        :param value: Value to set.
+        :type attr: str
+        :type value: any
+        """
         try:
             # Check if attribute exists
             self.__dict__[attr]
diff --git a/resources/libraries/python/InterfaceUtil.py b/resources/libraries/python/InterfaceUtil.py
index 71d36c1c9d..795bb52933 100644
--- a/resources/libraries/python/InterfaceUtil.py
+++ b/resources/libraries/python/InterfaceUtil.py
@@ -450,6 +450,47 @@ class InterfaceUtil(object):
                                                         interface_dump_json)
 
     @staticmethod
+    def update_nic_interface_names(node):
+        """Update interface names based on nic type and PCI address.
+
+        This method updates interface names in the same format as VPP does.
+
+        :param node: Node dictionary.
+        :type node: dict
+        """
+        for ifc in node['interfaces'].values():
+            if_pci = ifc['pci_address'].replace('.', ':').split(':')
+            bus = '{:x}'.format(int(if_pci[1], 16))
+            dev = '{:x}'.format(int(if_pci[2], 16))
+            fun = '{:x}'.format(int(if_pci[3], 16))
+            loc = '{bus}/{dev}/{fun}'.format(bus=bus, dev=dev, fun=fun)
+            if ifc['model'] == 'Intel-XL710':
+                ifc['name'] = 'FortyGigabitEthernet{loc}'.format(loc=loc)
+            elif ifc['model'] == 'Intel-X710':
+                ifc['name'] = 'TenGigabitEthernet{loc}'.format(loc=loc)
+            elif ifc['model'] == 'Intel-X520-DA2':
+                ifc['name'] = 'TenGigabitEthernet{loc}'.format(loc=loc)
+            elif ifc['model'] == 'Cisco-VIC-1385':
+                ifc['name'] = 'FortyGigabitEthernet{loc}'.format(loc=loc)
+            elif ifc['model'] == 'Cisco-VIC-1227':
+                ifc['name'] = 'TenGigabitEthernet{loc}'.format(loc=loc)
+            else:
+                ifc['name'] = 'UnknownEthernet{loc}'.format(loc=loc)
+
+    @staticmethod
+    def update_nic_interface_names_on_all_duts(nodes):
+        """Update interface names based on nic type and PCI address on all DUTs.
+
+        This method updates interface names in the same format as VPP does.
+
+        :param nodes: Topology nodes.
+        :type nodes: dict
+        """
+        for node in nodes.values():
+            if node['type'] == NodeType.DUT:
+                InterfaceUtil.update_nic_interface_names(node)
+
+    @staticmethod
     def update_tg_interface_data_on_node(node):
         """Update interface name for TG/linux node in DICT__nodes.
 
diff --git a/resources/libraries/python/KubernetesUtils.py b/resources/libraries/python/KubernetesUtils.py
new file mode 100644
index 0000000000..5faa056ddc
--- /dev/null
+++ b/resources/libraries/python/KubernetesUtils.py
@@ -0,0 +1,372 @@
+# Copyright (c) 2017 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+"""Library to control Kubernetes kubectl."""
+
+import time
+import yaml
+
+from resources.libraries.python.constants import Constants
+from resources.libraries.python.topology import NodeType
+from resources.libraries.python.ssh import SSH
+from resources.libraries.python.CpuUtils import CpuUtils
+from resources.libraries.python.VppConfigGenerator import VppConfigGenerator
+
+__all__ = ["KubernetesUtils"]
+
+
+class KubernetesUtils(object):
+    """Kubernetes utilities class."""
+
+    def __init__(self):
+        """Initialize KubernetesUtils class."""
+        pass
+
+    @staticmethod
+    def setup_kubernetes_on_node(node):
+        """Set up Kubernetes on node.
+
+        :param node: DUT node.
+        :type node: dict
+        :raises RuntimeError: If Kubernetes setup failed on node.
+        """
+        ssh = SSH()
+        ssh.connect(node)
+
+        cmd = '{dir}/{lib}/k8s_setup.sh '.format(dir=Constants.REMOTE_FW_DIR,
+                                                 lib=Constants.RESOURCES_LIB_SH)
+        (ret_code, _, _) = ssh.exec_command(cmd, timeout=120)
+        if int(ret_code) != 0:
+            raise RuntimeError('Failed to setup Kubernetes on {node}.'
+                               .format(node=node['host']))
+
+    @staticmethod
+    def setup_kubernetes_on_all_duts(nodes):
+        """Set up Kubernetes on all DUTs.
+
+        :param nodes: Topology nodes.
+        :type nodes: dict
+        """
+        for node in nodes.values():
+            if node['type'] == NodeType.DUT:
+                KubernetesUtils.setup_kubernetes_on_node(node)
+
+    @staticmethod
+    def apply_kubernetes_resource_on_node(node, yaml_file, **kwargs):
+        """Apply Kubernetes resource on node.
+
+        :param node: DUT node.
+        :param yaml_file: YAML configuration file.
+        :param kwargs: Key-value pairs to replace in YAML template.
+        :type node: dict
+        :type yaml_file: str
+        :type kwargs: dict
+        :raises RuntimeError: If applying Kubernetes template failed.
+        """
+        ssh = SSH()
+        ssh.connect(node)
+
+        stream = file('{tpl}/{yaml}'.format(tpl=Constants.RESOURCES_TPL_K8S,
+                                            yaml=yaml_file), 'r')
+
+        for data in yaml.load_all(stream):
+            data = reduce(lambda a, kv: a.replace(*kv), kwargs.iteritems(),
+                          yaml.dump(data, default_flow_style=False))
+            # Workaround to avoid using RAW string anotated with | in YAML as
+            # library + bash is misinterpreting spaces.
+            data = data.replace('.conf:\n', '.conf: |\n')
+            cmd = 'cat <<EOF | kubectl apply -f - \n{data}\nEOF'.format(
+                data=data)
+            (ret_code, _, _) = ssh.exec_command_sudo(cmd, timeout=120)
+            if int(ret_code) != 0:
+                raise RuntimeError('Failed to apply Kubernetes template {yaml} '
+                                   'on {node}.'.format(yaml=yaml_file,
+                                                       node=node['host']))
+
+    @staticmethod
+    def apply_kubernetes_resource_on_all_duts(nodes, yaml_file, **kwargs):
+        """Apply Kubernetes resource on all DUTs.
+
+        :param nodes: Topology nodes.
+        :param yaml_file: YAML configuration file.
+        :param kwargs: Key-value pairs to replace in YAML template.
+        :type nodes: dict
+        :type yaml_file: str
+        :type kwargs: dict
+        """
+        for node in nodes.values():
+            if node['type'] == NodeType.DUT:
+                KubernetesUtils.apply_kubernetes_resource_on_node(node,
+                                                                  yaml_file,
+                                                                  **kwargs)
+
+    @staticmethod
+    def create_kubernetes_cm_from_file_on_node(node, name, key, src_file):
+        """Create Kubernetes ConfigMap from file on node.
+
+        :param node: DUT node.
+        :param name: ConfigMap name.
+        :param key: Key (destination file).
+        :param src_file: Source file.
+        :type node: dict
+        :type name: str
+        :type key: str
+        :type src_file: str
+        :raises RuntimeError: If creating Kubernetes ConfigMap failed.
+        """
+        ssh = SSH()
+        ssh.connect(node)
+
+        cmd = 'kubectl create -n csit configmap {name} --from-file={key}='\
+            '{src_file}'.format(name=name, key=key, src_file=src_file)
+        (ret_code, _, _) = ssh.exec_command_sudo(cmd, timeout=120)
+        if int(ret_code) != 0:
+            raise RuntimeError('Failed to create Kubernetes ConfigMap {name} '
+                               'on {node}.'.format(name=name,
+                                                   node=node['host']))
+
+    @staticmethod
+    def create_kubernetes_cm_from_file_on_all_duts(nodes, name, key, src_file):
+        """Create Kubernetes ConfigMap from file on all DUTs.
+
+        :param nodes: Topology nodes.
+        :param name: ConfigMap name.
+        :param key: Key (destination file).
+        :param src_file: Source file.
+        :type nodes: dict
+        :type name: str
+        :type key: str
+        :type src_file: str
+        """
+        for node in nodes.values():
+            if node['type'] == NodeType.DUT:
+                KubernetesUtils.create_kubernetes_cm_from_file_on_node(node,
+                                                                       name,
+                                                                       key,
+                                                                       src_file)
+
+    @staticmethod
+    def delete_kubernetes_resource_on_node(node, rtype='po,cm', name=None):
+        """Delete Kubernetes resource on node.
+
+        :param node: DUT node.
+        :param rtype: Kubernetes resource type.
+        :param name: Name of resource.
+        :type node: dict
+        :type rtype: str
+        :type name: str
+        :raises RuntimeError: If deleting Kubernetes resource failed.
+        """
+        ssh = SSH()
+        ssh.connect(node)
+
+        name = '{name}'.format(name=name) if name else '--all'
+
+        cmd = 'kubectl delete -n csit {rtype} {name}'\
+            .format(rtype=rtype, name=name)
+        (ret_code, _, _) = ssh.exec_command_sudo(cmd, timeout=120)
+        if int(ret_code) != 0:
+            raise RuntimeError('Failed to delete Kubernetes resources in CSIT '
+                               'namespace on {node}.'.format(node=node['host']))
+
+        cmd = 'kubectl get -n csit pods --no-headers'
+        for _ in range(24):
+            (ret_code, stdout, _) = ssh.exec_command_sudo(cmd, timeout=120)
+            if int(ret_code) == 0:
+                ready = True
+                for line in stdout.splitlines():
+                    if 'No resources found.' not in line:
+                        ready = False
+                if ready:
+                    break
+            time.sleep(5)
+        else:
+            raise RuntimeError('Failed to delete Kubernetes resources in CSIT '
+                               'namespace on {node}.'.format(node=node['host']))
+
+    @staticmethod
+    def delete_kubernetes_resource_on_all_duts(nodes, rtype='po,cm', name=None):
+        """Delete all Kubernetes resource on all DUTs.
+
+        :param nodes: Topology nodes.
+        :param rtype: Kubernetes resource type.
+        :param name: Name of resource.
+        :type nodes: dict
+        :type rtype: str
+        :type name: str
+        """
+        for node in nodes.values():
+            if node['type'] == NodeType.DUT:
+                KubernetesUtils.delete_kubernetes_resource_on_node(node, rtype,
+                                                                   name)
+
+    @staticmethod
+    def describe_kubernetes_resource_on_node(node, rtype='po,cm'):
+        """Describe Kubernetes resource on node.
+
+        :param node: DUT node.
+        :param rtype: Kubernetes resource type.
+        :type node: dict
+        :type rtype: str
+        :raises RuntimeError: If describing Kubernetes resource failed.
+        """
+        ssh = SSH()
+        ssh.connect(node)
+
+        cmd = 'kubectl describe -n csit {rtype}'.format(rtype=rtype)
+        (ret_code, _, _) = ssh.exec_command_sudo(cmd, timeout=120)
+        if int(ret_code) != 0:
+            raise RuntimeError('Failed to describe Kubernetes resource on '
+                               '{node}.'.format(node=node['host']))
+
+    @staticmethod
+    def describe_kubernetes_resource_on_all_duts(nodes, rtype='po,cm'):
+        """Describe Kubernetes resource on all DUTs.
+
+        :param nodes: Topology nodes.
+        :param rtype: Kubernetes resource type.
+        :type nodes: dict
+        :type rtype: str
+        """
+        for node in nodes.values():
+            if node['type'] == NodeType.DUT:
+                KubernetesUtils.describe_kubernetes_resource_on_node(node,
+                                                                     rtype)
+
+    @staticmethod
+    def reset_kubernetes_on_node(node):
+        """Reset Kubernetes on node.
+
+        :param node: DUT node.
+        :type node: dict
+        :raises RuntimeError: If resetting Kubernetes failed.
+        """
+        ssh = SSH()
+        ssh.connect(node)
+
+        cmd = 'kubeadm reset && rm -rf $HOME/.kube'
+        (ret_code, _, _) = ssh.exec_command_sudo(cmd, timeout=120)
+        if int(ret_code) != 0:
+            raise RuntimeError('Failed to reset Kubernetes on {node}.'
+                               .format(node=node['host']))
+
+    @staticmethod
+    def reset_kubernetes_on_all_duts(nodes):
+        """Reset Kubernetes on all DUTs.
+
+        :param nodes: Topology nodes.
+        :type nodes: dict
+        """
+        for node in nodes.values():
+            if node['type'] == NodeType.DUT:
+                KubernetesUtils.reset_kubernetes_on_node(node)
+
+    @staticmethod
+    def wait_for_kubernetes_pods_on_node(node):
+        """Wait for Kubernetes PODs to become in 'Running' state on node.
+
+        :param node: DUT node.
+        :type node: dict
+        :raises RuntimeError: If Kubernetes PODs are not ready.
+        """
+        ssh = SSH()
+        ssh.connect(node)
+
+        cmd = 'kubectl get -n csit pods --no-headers'
+        for _ in range(48):
+            (ret_code, stdout, _) = ssh.exec_command_sudo(cmd, timeout=120)
+            if int(ret_code) == 0:
+                ready = True
+                for line in stdout.splitlines():
+                    if 'Running' not in line:
+                        ready = False
+                if ready:
+                    break
+            time.sleep(5)
+        else:
+            raise RuntimeError('Kubernetes PODs are not ready on {node}.'
+                               .format(node=node['host']))
+
+    @staticmethod
+    def wait_for_kubernetes_pods_on_all_duts(nodes):
+        """Wait for Kubernetes PODs to become in Running state on all DUTs.
+
+        :param nodes: Topology nodes.
+        :type nodes: dict
+        """
+        for node in nodes.values():
+            if node['type'] == NodeType.DUT:
+                KubernetesUtils.wait_for_kubernetes_pods_on_node(node)
+
+    @staticmethod
+    def create_kubernetes_vswitch_startup_config(**kwargs):
+        """Create Kubernetes VSWITCH startup configuration.
+
+        :param kwargs: Key-value pairs used to create configuration.
+        :param kwargs: dict
+        """
+        cpuset_cpus = \
+            CpuUtils.cpu_slice_of_list_per_node(node=kwargs['node'],
+                                                cpu_node=kwargs['cpu_node'],
+                                                skip_cnt=kwargs['cpu_skip'],
+                                                cpu_cnt=kwargs['cpu_cnt'],
+                                                smt_used=kwargs['smt_used'])
+
+        # Create config instance
+        vpp_config = VppConfigGenerator()
+        vpp_config.set_node(kwargs['node'])
+        vpp_config.add_unix_cli_listen(value='0.0.0.0:5002')
+        vpp_config.add_unix_nodaemon()
+        vpp_config.add_dpdk_socketmem('1024,1024')
+        vpp_config.add_heapsize('3G')
+        vpp_config.add_ip6_hash_buckets('2000000')
+        vpp_config.add_ip6_heap_size('3G')
+        if kwargs['framesize'] < 1522:
+            vpp_config.add_dpdk_no_multi_seg()
+        vpp_config.add_dpdk_dev_default_rxq(kwargs['rxq'])
+        vpp_config.add_dpdk_dev(kwargs['if1'], kwargs['if2'])
+        # We will pop first core from list to be main core
+        vpp_config.add_cpu_main_core(str(cpuset_cpus.pop(0)))
+        # if this is not only core in list, the rest will be used as workers.
+        if cpuset_cpus:
+            corelist_workers = ','.join(str(cpu) for cpu in cpuset_cpus)
+            vpp_config.add_cpu_corelist_workers(corelist_workers)
+        vpp_config.apply_config(filename=kwargs['filename'], restart_vpp=False)
+
+    @staticmethod
+    def create_kubernetes_vnf_startup_config(**kwargs):
+        """Create Kubernetes VNF startup configuration.
+
+        :param kwargs: Key-value pairs used to create configuration.
+        :param kwargs: dict
+        """
+        cpuset_cpus = \
+            CpuUtils.cpu_slice_of_list_per_node(node=kwargs['node'],
+                                                cpu_node=kwargs['cpu_node'],
+                                                skip_cnt=kwargs['cpu_skip'],
+                                                cpu_cnt=kwargs['cpu_cnt'],
+                                                smt_used=kwargs['smt_used'])
+
+        # Create config instance
+        vpp_config = VppConfigGenerator()
+        vpp_config.set_node(kwargs['node'])
+        vpp_config.add_unix_cli_listen(value='0.0.0.0:5002')
+        vpp_config.add_unix_nodaemon()
+        # We will pop first core from list to be main core
+        vpp_config.add_cpu_main_core(str(cpuset_cpus.pop(0)))
+        # if this is not only core in list, the rest will be used as workers.
+        if cpuset_cpus:
+            corelist_workers = ','.join(str(cpu) for cpu in cpuset_cpus)
+            vpp_config.add_cpu_corelist_workers(corelist_workers)
+        vpp_config.add_plugin_disable('dpdk_plugin.so')
+        vpp_config.apply_config(filename=kwargs['filename'], restart_vpp=False)
diff --git a/resources/libraries/python/VppConfigGenerator.py b/resources/libraries/python/VppConfigGenerator.py
index 7bd0175b3d..69096491a2 100644
--- a/resources/libraries/python/VppConfigGenerator.py
+++ b/resources/libraries/python/VppConfigGenerator.py
@@ -22,10 +22,12 @@ from resources.libraries.python.topology import Topology
 
 __all__ = ['VppConfigGenerator']
 
+
 class VppConfigGenerator(object):
     """VPP Configuration File Generator."""
 
     def __init__(self):
+        """Initialize library."""
         # VPP Node to apply configuration on
         self._node = ''
         # VPP Hostname
@@ -36,8 +38,6 @@ class VppConfigGenerator(object):
         self._vpp_config = ''
         # VPP Service name
         self._vpp_service_name = 'vpp'
-        # VPP Configuration file path
-        self._vpp_config_filename = '/etc/vpp/startup.conf'
 
     def set_node(self, node):
         """Set DUT node.
@@ -46,29 +46,12 @@ class VppConfigGenerator(object):
         :type node: dict
         :raises RuntimeError: If Node type is not DUT.
         """
-
         if node['type'] != NodeType.DUT:
             raise RuntimeError('Startup config can only be applied to DUT'
                                'node.')
         self._node = node
         self._hostname = Topology.get_node_hostname(node)
 
-    def set_config_filename(self, filename):
-        """Set startup configuration filename.
-
-        :param filename: Startup configuration filename.
-        :type filename: str
-        """
-        self._vpp_config_filename = filename
-
-    def get_config_filename(self):
-        """Get startup configuration filename.
-
-        :returns: Startup configuration filename.
-        :rtype: str
-        """
-        return self._vpp_config_filename
-
     def get_config_str(self):
         """Get dumped startup configuration in VPP config format.
 
@@ -88,11 +71,10 @@ class VppConfigGenerator(object):
         :type value: str
         :type path: list
         """
-
         if len(path) == 1:
             config[path[0]] = value
             return
-        if not config.has_key(path[0]):
+        if path[0] not in config:
             config[path[0]] = {}
         self.add_config_item(config[path[0]], value, path[1:])
 
@@ -100,9 +82,9 @@ class VppConfigGenerator(object):
         """Dump the startup configuration in VPP config format.
 
         :param obj: Python Object to print.
-        :param nested_level: Nested level for indentation.
+        :param level: Nested level for indentation.
         :type obj: Obj
-        :type nested_level: int
+        :type level: int
         :returns: nothing
         """
         indent = '  '
@@ -158,7 +140,6 @@ class VppConfigGenerator(object):
         :type devices: tuple
         :raises ValueError: If PCI address format is not valid.
         """
-
         pattern = re.compile("^[0-9A-Fa-f]{4}:[0-9A-Fa-f]{2}:"
                              "[0-9A-Fa-f]{2}\\.[0-9A-Fa-f]$")
         for device in devices:
@@ -219,7 +200,6 @@ class VppConfigGenerator(object):
         path = ['dpdk', 'dev default', 'num-tx-desc']
         self.add_config_item(self._nodeconfig, value, path)
 
-
     def add_dpdk_socketmem(self, value):
         """Add DPDK socket memory configuration.
 
@@ -312,16 +292,21 @@ class VppConfigGenerator(object):
         path = ['nat']
         self.add_config_item(self._nodeconfig, value, path)
 
-    def apply_config(self, waittime=5, retries=12):
+    def apply_config(self, filename='/etc/vpp/startup.conf', waittime=5,
+                     retries=12, restart_vpp=True):
         """Generate and apply VPP configuration for node.
 
         Use data from calls to this class to form a startup.conf file and
         replace /etc/vpp/startup.conf with it on node.
 
+        :param filename: Startup configuration file name.
         :param waittime: Time to wait for VPP to restart (default 5 seconds).
         :param retries: Number of times (default 12) to re-try waiting.
+        :param restart_vpp: Whether to restart VPP.
+        :type filename: str
         :type waittime: int
         :type retries: int
+        :type restart_vpp: bool.
         :raises RuntimeError: If writing config file failed, or restarting of
         VPP failed.
         """
@@ -330,39 +315,37 @@ class VppConfigGenerator(object):
         ssh = SSH()
         ssh.connect(self._node)
 
-        # We're using this "| sudo tee" construct because redirecting
-        # a sudo's output ("sudo echo xxx > /path/to/file") does not
-        # work on most platforms...
         (ret, _, _) = \
-            ssh.exec_command('echo "{0}" | sudo tee {1}'.
-                             format(self._vpp_config,
-                                    self._vpp_config_filename))
+            ssh.exec_command('echo "{config}" | sudo tee {filename}'.
+                             format(config=self._vpp_config,
+                                    filename=filename))
 
         if ret != 0:
             raise RuntimeError('Writing config file failed to node {}'.
                                format(self._hostname))
 
-        # Instead of restarting, we'll do separate start and stop
-        # actions. This way we don't care whether VPP was running
-        # to begin with.
-        ssh.exec_command('sudo service {} stop'
-                         .format(self._vpp_service_name))
-        (ret, _, _) = \
-            ssh.exec_command('sudo service {} start'
+        if restart_vpp:
+            # Instead of restarting, we'll do separate start and stop
+            # actions. This way we don't care whether VPP was running
+            # to begin with.
+            ssh.exec_command('sudo service {} stop'
                              .format(self._vpp_service_name))
-        if ret != 0:
-            raise RuntimeError('Restarting VPP failed on node {}'.
-                               format(self._hostname))
-
-        # Sleep <waittime> seconds, up to <retry> times,
-        # and verify if VPP is running.
-        for _ in range(retries):
-            time.sleep(waittime)
             (ret, _, _) = \
-                ssh.exec_command('echo show hardware-interfaces | '
-                                 'nc 0 5002 || echo "VPP not yet running"')
-            if ret == 0:
-                break
-        else:
-            raise RuntimeError('VPP failed to restart on node {}'.
-                               format(self._hostname))
+                ssh.exec_command('sudo service {} start'
+                                 .format(self._vpp_service_name))
+            if ret != 0:
+                raise RuntimeError('Restarting VPP failed on node {}'.
+                                   format(self._hostname))
+
+            # Sleep <waittime> seconds, up to <retry> times,
+            # and verify if VPP is running.
+            for _ in range(retries):
+                time.sleep(waittime)
+                (ret, _, _) = \
+                    ssh.exec_command('echo show hardware-interfaces | '
+                                     'nc 0 5002 || echo "VPP not yet running"')
+                if ret == 0:
+                    break
+            else:
+                raise RuntimeError('VPP failed to restart on node {}'.
+                                   format(self._hostname))
diff --git a/resources/libraries/python/constants.py b/resources/libraries/python/constants.py
index a8d40a2a26..01a96a861b 100644
--- a/resources/libraries/python/constants.py
+++ b/resources/libraries/python/constants.py
@@ -35,6 +35,9 @@ class Constants(object):
     # QEMU install directory
     QEMU_INSTALL_DIR = '/opt/qemu-2.5.0'
 
+    # Kubernetes templates location
+    RESOURCES_TPL_K8S = 'resources/templates/kubernetes'
+
     # Honeycomb directory location at topology nodes:
     REMOTE_HC_DIR = '/opt/honeycomb'
 
diff --git a/resources/libraries/robot/performance/performance_setup.robot b/resources/libraries/robot/performance/performance_setup.robot
index 0dc7f78b45..9713c2268a 100644
--- a/resources/libraries/robot/performance/performance_setup.robot
+++ b/resources/libraries/robot/performance/performance_setup.robot
@@ -13,7 +13,6 @@
 
 *** Settings ***
 | Library | resources.libraries.python.DUTSetup
-| Library | resources.libraries.python.VhostUser
 | Resource | resources/libraries/robot/performance/performance_configuration.robot
 | Resource | resources/libraries/robot/performance/performance_utils.robot
 | Documentation | Performance suite keywords - Suite and test setups and
@@ -242,7 +241,6 @@
 | | ...
 | | [Arguments] | ${topology_type} | ${nic_model}
 | | ...
-| | Show vpp version on all DUTs | ${nodes}
 | | Set variables in 2-node circular topology with DUT interface model
 | | ... | ${nic_model}
 | | Initialize traffic generator | ${tg} | ${tg_if1} | ${tg_if2}
@@ -269,7 +267,6 @@
 | | [Arguments] | ${topology_type} | ${nic_model} | ${tg_if1_dest_mac}
 | | ... | ${tg_if2_dest_mac}
 | | ...
-| | Show vpp version on all DUTs | ${nodes}
 | | Set variables in 2-node circular topology with DUT interface model
 | | ... | ${nic_model}
 | | Initialize traffic generator | ${tg} | ${tg_if1} | ${tg_if2}
@@ -294,7 +291,6 @@
 | | ...
 | | [Arguments] | ${topology_type} | ${nic_model}
 | | ...
-| | Show vpp version on all DUTs | ${nodes}
 | | Set variables in 3-node circular topology with DUT interface model
 | | ... | ${nic_model}
 | | Initialize traffic generator | ${tg} | ${tg_if1} | ${tg_if2}
diff --git a/resources/libraries/robot/performance/performance_utils.robot b/resources/libraries/robot/performance/performance_utils.robot
index 884bc4831e..6d6413d966 100644
--- a/resources/libraries/robot/performance/performance_utils.robot
+++ b/resources/libraries/robot/performance/performance_utils.robot
@@ -17,6 +17,7 @@
 | Library | resources.libraries.python.NodePath
 | Library | resources.libraries.python.DpdkUtil
 | Library | resources.libraries.python.InterfaceUtil
+| Library | resources.libraries.python.KubernetesUtils
 | Library | resources.libraries.python.VhostUser
 | Library | resources.libraries.python.TrafficGenerator
 | Library | resources.libraries.python.TrafficGenerator.TGDropRateSearchImpl
diff --git a/resources/libraries/robot/shared/default.robot b/resources/libraries/robot/shared/default.robot
index 250380dcc0..fa291bf1aa 100644
--- a/resources/libraries/robot/shared/default.robot
+++ b/resources/libraries/robot/shared/default.robot
@@ -401,4 +401,4 @@
 | | ... | \| Start VPP Service on DUT \| ${nodes['DUT1']} \|
 | | ...
 | | [Arguments] | ${node}
-| | Start VPP Service | ${node}
\ No newline at end of file
+| | Start VPP Service | ${node}