Clean: Interface Keywords

Signed-off-by: Peter Mikus <pmikus@cisco.com>
Change-Id: Ideddcea56120cf770aec78ca24813baf7d05ba11
(cherry picked from commit 484cb0bddf8ad75129ac20b955a72f36f4241ad2)

4 files changed, 97 insertions, 504 deletions

diff --git a/resources/libraries/robot/ip/map.robot b/resources/libraries/robot/ip/map.robot
deleted file mode 100644
index ac086b4511..0000000000
--- a/resources/libraries/robot/ip/map.robot
+++ /dev/null
@@ -1,312 +0,0 @@
-# Copyright (c) 2016 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Variables | resources/libraries/python/topology.py
-| Library | resources.libraries.python.topology.Topology
-| Library | resources.libraries.python.DUTSetup
-| Library | resources.libraries.python.TGSetup
-| Library | resources.libraries.python.Map
-| Documentation | Keywords for MAP feature in VPP.
-
-*** Keywords ***
-| Send IPv4 UDP and check headers for lightweight 4over6
-| | [Documentation]
-| | ... | Send empty UDP to given IPv4 dst and UDP port and check received \
-| | ... | packets headers (Ethernet, IPv6, IPv4, UDP).
-| | ...
-| | ... | *Arguments:*
-| | ... | - tg_node - Node where to run traffic script. Type: string
-| | ... | - tx_if - Interface from where to send ICPMv4 packet. Type: string
-| | ... | - rx_if - Interface where to receive IPinIP packet. Type: string
-| | ... | - tx_dst_mac - Destination MAC address of IPv4 packet. Type: string
-| | ... | - tx_dst_ipv4 - Destination IPv4 address. Type: string
-| | ... | - tx_src_ipv4 - Source IPv4 address. Type: string
-| | ... | - tx_dst_udp_port - Destination UDP port. Type: integer
-| | ... | - rx_dst_mac - Expected destination MAC address. Type: string
-| | ... | - rx_src_mac - Expected source MAC address. Type: string
-| | ... | - dst_ipv6 - Expected destination IPv6 address. Type: string
-| | ... | - src_ipv6 - Expected source IPv6 address. Type: string
-| | ...
-| | ... | *Return:*
-| | ... | - No value returned
-| | ...
-| | ... | *Example:*
-| | ...
-| | ... | \| Send IPv4 UDP and check headers for lightweight 4over6 \
-| | ... | \| ${tg_node} \| eth3 \| eth2 \| 08:00:27:66:b8:57 \| 20.0.0.1 \
-| | ... | \| 20.0.0.2 \| 1232 \| 08:00:27:46:2b:4c \| 08:00:27:f3:be:f0 \
-| | ... | \| 2001:1::2 \| 2001:1::1 \|
-| | ...
-| | [Arguments]
-| | ... | ${tg_node} | ${tx_if} | ${rx_if} | ${tx_dst_mac} | ${tx_dst_ipv4}
-| | ... | ${tx_src_ipv4} | ${tx_dst_udp_port} | ${rx_dst_mac} | ${rx_src_mac}
-| | ... | ${dst_ipv6} | ${src_ipv6}
-| | ...
-| | ${tx_name}= | Get interface name | ${tg_node} | ${tx_if}
-| | ${rx_name}= | Get interface name | ${tg_node} | ${rx_if}
-| | ${args}= | Catenate
-| | ... | --tx_if | ${tx_name} | --rx_if | ${rx_name}
-| | ... | --tx_dst_mac | ${tx_dst_mac} | --tx_src_ipv4 | ${tx_src_ipv4}
-| | ... | --tx_dst_ipv4 | ${tx_dst_ipv4}
-| | ... | --tx_dst_udp_port | ${tx_dst_udp_port}
-| | ... | --rx_dst_mac | ${rx_dst_mac} | --rx_src_mac | ${rx_src_mac}
-| | ... | --src_ipv6 | ${src_ipv6} | --dst_ipv6 | ${dst_ipv6}
-| | ...
-| | Run Traffic Script On Node
-| | ... | send_ipv4_udp_check_lw_4o6.py | ${tg_node} | ${args}
-
-| Send IPv4 ICMP and check headers for lightweight 4over6
-| | [Documentation]
-| | ... | Send ICMP request with ID to given IPv4 destination and \
-| | ... | check received packets headers (Ethernet, IPv6, IPv4, ICMP).
-| | ...
-| | ... | *Arguments:*
-| | ... | - tg_node - Node where to run traffic script. Type: string
-| | ... | - tx_if - Interface from where to send ICPMv4 packet. Type: string
-| | ... | - rx_if - Interface where to receive IPinIP packet. Type: string
-| | ... | - tx_dst_mac - Destination MAC address of IPv4 packet. Type: string
-| | ... | - tx_dst_ipv4 - Destination IPv4 address. Type: string
-| | ... | - tx_src_ipv4 - Source IPv4 address. Type: string
-| | ... | - tx_icmp_id - ICMP ID. Type: integer
-| | ... | - rx_dst_mac - Expected destination MAC address. Type: string
-| | ... | - rx_src_mac - Expected source MAC address. Type: string
-| | ... | - dst_ipv6 - Expected destination IPv6 address. Type: string
-| | ... | - src_ipv6 - Expected source IPv6 address. Type: string
-| | ...
-| | ... | *Return:*
-| | ... | - No value returned
-| | ...
-| | ... | *Example:*
-| | ...
-| | ... | \| Send IPv4 ICMP and check headers for lightweight 4over6 \
-| | ... | \| ${tg_node} \| eth3 \| eth2 \| 08:00:27:66:b8:57 \| 20.0.0.1 \
-| | ... | \| 20.0.0.2 \| 1232 \| 08:00:27:46:2b:4c \| 08:00:27:f3:be:f0 \
-| | ... | \| 2001:1::2 \| 2001:1::1 \|
-| | ...
-| | [Arguments]
-| | ... | ${tg_node} | ${tx_if} | ${rx_if} | ${tx_dst_mac} | ${tx_dst_ipv4}
-| | ... | ${tx_src_ipv4} | ${tx_icmp_id} | ${rx_dst_mac} | ${rx_src_mac}
-| | ... | ${dst_ipv6} | ${src_ipv6}
-| | ...
-| | ${tx_name}= | Get interface name | ${tg_node} | ${tx_if}
-| | ${rx_name}= | Get interface name | ${tg_node} | ${rx_if}
-| | ${args}= | Catenate
-| | ... | --tx_if | ${tx_name} | --rx_if | ${rx_name}
-| | ... | --tx_dst_mac | ${tx_dst_mac} | --tx_src_ipv4 | ${tx_src_ipv4}
-| | ... | --tx_dst_ipv4 | ${tx_dst_ipv4} | --tx_icmp_id | ${tx_icmp_id}
-| | ... | --rx_dst_mac | ${rx_dst_mac} | --rx_src_mac | ${rx_src_mac}
-| | ... | --src_ipv6 | ${src_ipv6} | --dst_ipv6 | ${dst_ipv6}
-| | ...
-| | Run Traffic Script On Node
-| | ... | send_ipv4_icmp_check_lw_4o6.py | ${tg_node} | ${args}
-
-| Send IPv4 UDP in IPv6 and check headers for lightweight 4over6
-| | [Documentation]
-| | ... | Send empty UDP in IPv4 in IPv6 and check if IPv4 packet is correctly \
-| | ... | decapsulated from IPv6.
-| | ...
-| | ... | *Arguments:*
-| | ... | - tg_node - Node where to run traffic script. Type: string
-| | ... | - tx_if - Interface from where to send ICPMv4 packet. Type: string
-| | ... | - rx_if - Interface where to receive IPinIP packet. Type: string
-| | ... | - tx_dst_mac - Destination MAC address of IPv4 packet. Type: string
-| | ... | - tx_src_mac - Source MAC address of IPv4 packet. Type: string
-| | ... | - tx_dst_ipv6 - Destination IPv6 address. Type: string
-| | ... | - tx_src_ipv6 - Source IPv6 address. Type: string
-| | ... | - tx_dst_ipv4 - Destination IPv4 address. Type: string
-| | ... | - tx_src_ipv4 - Source IPv4 address. Type: string
-| | ... | - tx_src_udp_port - Source UDP port. Type: integer
-| | ... | - rx_dst_mac - Expected destination MAC address. Type: string
-| | ... | - rx_src_mac - Expected source MAC address. Type: string
-| | ...
-| | ... | *Return:*
-| | ... | - No value returned
-| | ...
-| | ... | *Example:*
-| | ...
-| | ... | \| Send IPv4 UDP in IPv6 and check headers for lightweight 4over6 \
-| | ... | \| ${tg_node} \| eth3 \| eth2 \
-| | ... | \| 08:00:27:66:b8:57 \| 08:00:27:33:54:21 \
-| | ... | \| 2001:1::2 \| 2001:1::1 \| 20.0.0.1 \| 20.0.0.2 \
-| | ... | \| 1232 \| 08:00:27:46:2b:4c \| 08:00:27:f3:be:f0 \|
-| | ...
-| | [Arguments]
-| | ... | ${tg_node} | ${tx_if} | ${rx_if} | ${tx_dst_mac} | ${tx_src_mac}
-| | ... | ${tx_dst_ipv6} | ${tx_src_ipv6} | ${tx_dst_ipv4} | ${tx_src_ipv4}
-| | ... | ${tx_src_udp_port} | ${rx_dst_mac} | ${rx_src_mac}
-| | ...
-| | ${tx_name}= | Get interface name | ${tg_node} | ${tx_if}
-| | ${rx_name}= | Get interface name | ${tg_node} | ${rx_if}
-| | ${args}= | Catenate
-| | ... | --tx_if | ${tx_name} | --rx_if | ${rx_name}
-| | ... | --tx_dst_mac | ${tx_dst_mac} | --tx_src_mac | ${tx_src_mac}
-| | ... | --tx_dst_ipv6 | ${tx_dst_ipv6} | --tx_src_ipv6 | ${tx_src_ipv6}
-| | ... | --tx_dst_ipv4 | ${tx_dst_ipv4} | --tx_src_ipv4 | ${tx_src_ipv4}
-| | ... | --tx_src_udp_port | ${tx_src_udp_port}
-| | ... | --rx_dst_mac | ${rx_dst_mac} | --rx_src_mac | ${rx_src_mac}
-| | ...
-| | Run Traffic Script On Node
-| | ... | send_lw_4o6_check_ipv4_udp.py | ${tg_node} | ${args}
-
-| Send IPv4 UDP in IPv6 and check headers for lightweight hairpinning
-| | [Documentation]
-| | ... | Send empty UDP in IPv4 in IPv6 and check if IPv4 packet is correctly \
-| | ... | decapsulated and re-encapsulated to another lwB4.
-| | ...
-| | ... | *Arguments:*
-| | ... | - tg_node - Node where to run traffic script. Type: string
-| | ... | - tx_if - Interface from where to send ICPMv4 packet. Type: string
-| | ... | - rx_if - Interface where to receive IPinIP packet. Type: string
-| | ... | - tx_dst_mac - Destination MAC address of send IPv6 packet. \
-| | ... |   Type: string
-| | ... | - tx_dst_ipv6 - Destination IPv6 address (lwAFTR). Type: string
-| | ... | - tx_src_ipv6 - Source IPv6 address (lwB4_1). Type: string
-| | ... | - tx_dst_ipv4 - Destination IPv4 address. Type: string
-| | ... | - tx_src_ipv4 - Source IPv4 address. Type: string
-| | ... | - tx_dst_udp_port - Destination UDP port (PSID_2 related). \
-| | ... |   Type: integer
-| | ... | - tx_src_udp_port - Source UDP port (PSID_1 related). Type: integer
-| | ... | - rx_dst_mac - Expected destination MAC address. Type: string
-| | ... | - rx_src_mac - Expected source MAC address. Type: string
-| | ... | - rx_dst_ipv6 - Expected destination IPv6 address (lwB4_2). \
-| | ... |   Type: string
-| | ... | - rx_src_ipv6 - Expected source IPv6 address (lwAFTR). Type: string
-| | ...
-| | ... | *Return:*
-| | ... | - No value returned
-| | ...
-| | ... | *Example:*
-| | ...
-| | ... | \| Send IPv4 UDP in IPv6 and check headers for lightweight hairpinning \
-| | ... | \| ${tg_node} \| port3 \| port3 \| 08:00:27:f3:be:f0 \| 2001:1::1 \
-| | ... | \| 2001:1::2 \| 20.0.0.1 \| 20.0.0.1 \| ${6232} \| ${1232} \
-| | ... | \| 08:00:27:46:2b:4c \| 08:00:27:f3:be:f0 \| 2001:1::3 \| 2001:1::1 \|
-| | ...
-| | [Arguments]
-| | ... | ${tg_node} | ${tx_if} | ${rx_if}
-| | ... | ${tx_dst_mac}
-| | ... | ${tx_dst_ipv6} | ${tx_src_ipv6}
-| | ... | ${tx_dst_ipv4} | ${tx_src_ipv4}
-| | ... | ${tx_dst_udp_port} | ${tx_src_udp_port}
-| | ... | ${rx_dst_mac} | ${rx_src_mac}
-| | ... | ${rx_dst_ipv6} | ${rx_src_ipv6}
-| | ...
-| | ${tx_name}= | Get interface name | ${tg_node} | ${tx_if}
-| | ${rx_name}= | Get interface name | ${tg_node} | ${rx_if}
-| | ${args}= | Catenate
-| | ... | --tx_if | ${tx_name} | --rx_if | ${rx_name}
-| | ... | --tx_dst_mac | ${tx_dst_mac}
-| | ... | --tx_dst_ipv6 | ${tx_dst_ipv6} | --tx_src_ipv6 | ${tx_src_ipv6}
-| | ... | --tx_dst_ipv4 | ${tx_dst_ipv4} | --tx_src_ipv4 | ${tx_src_ipv4}
-| | ... | --tx_dst_udp_port | ${tx_dst_udp_port}
-| | ... | --tx_src_udp_port | ${tx_src_udp_port}
-| | ... | --rx_dst_mac | ${rx_dst_mac} | --rx_src_mac | ${rx_src_mac}
-| | ... | --rx_dst_ipv6 | ${rx_dst_ipv6} | --rx_src_ipv6 | ${rx_src_ipv6}
-| | ...
-| | Run Traffic Script On Node
-| | ... | send_lw_4o6_check_hairpinning_udp.py | ${tg_node} | ${args}
-
-| Send IPv4 UDP and check IPv6 headers for MAP-T
-| | [Documentation]
-| | ... | Send a UDP in IPv4 and check if IPv4 source and destination \
-| | ... | addresses are correctly translated into IPv6 addresses.
-| | ...
-| | ... | *Arguments:*
-| | ... | - tg_node - Node where to run traffic script. Type: string
-| | ... | - tx_if - Interface from where to send IPv4 UDP packet. Type: string
-| | ... | - rx_if - Interface where to receive IPv6 UDP packet. Type: string
-| | ... | - tx_dst_mac - Destination MAC address of IPv4 packet. Type: string
-| | ... | - tx_dst_ipv4 - Destination IPv4 address. Type: string
-| | ... | - tx_src_ipv4 - Source IPv4 address. Type: string
-| | ... | - tx_dst_udp_port - Destination UDP port. Type: integer
-| | ... | - rx_dst_mac - Expected destination MAC address. Type: string
-| | ... | - rx_src_mac - Expected source MAC address. Type: string
-| | ... | - dst_ipv6 - Expected destination IPv6 address. Type: string
-| | ... | - src_ipv6 - Expected source IPv6 address. Type: string
-| | ...
-| | ... | *Return:*
-| | ... | - No value returned
-| | ...
-| | ... | *Example:*
-| | ...
-| | ... | \| Send IPv4 UDP and check IPv6 headers for MAP-T \
-| | ... | \| ${tg_node} \| port3 \| port3 \| 08:00:27:66:b8:57 \
-| | ... | \| 20.169.201.219 \| 100.0.0.1 \| ${1232} \| 08:00:27:46:2b:4c \
-| | ... | \| 08:00:27:f3:be:f0 \| 2001:db8::14a9:c9db:0 \
-| | ... | \| 2001:db8:ffff::6400:1 \|
-| | ...
-| | [Arguments]
-| | ... | ${tg_node} | ${tx_if} | ${rx_if}
-| | ... | ${tx_dst_mac} | ${tx_dst_ipv4} | ${tx_src_ipv4} | ${tx_dst_udp_port}
-| | ... | ${rx_dst_mac} | ${rx_src_mac} | ${dst_ipv6} | ${src_ipv6}
-| | ...
-| | ${tx_name}= | Get interface name | ${tg_node} | ${tx_if}
-| | ${rx_name}= | Get interface name | ${tg_node} | ${rx_if}
-| | ${args}= | Catenate
-| | ... | --tx_if | ${tx_name} | --rx_if | ${rx_name}
-| | ... | --tx_dst_mac | ${tx_dst_mac}
-| | ... | --tx_src_ipv4 | ${tx_src_ipv4} | --tx_dst_ipv4 | ${tx_dst_ipv4}
-| | ... | --tx_dst_udp_port | ${tx_dst_udp_port}
-| | ... | --rx_dst_mac | ${rx_dst_mac} | --rx_src_mac | ${rx_src_mac}
-| | ... | --rx_src_ipv6 | ${src_ipv6} | --rx_dst_ipv6 | ${dst_ipv6}
-| | ...
-| | Run Traffic Script On Node
-| | ... | send_ipv4_udp_check_map_t.py | ${tg_node} | ${args}
-
-| Send IPv6 UDP and check IPv4 headers for MAP-T
-| | [Documentation]
-| | ... | Send a UDP in IPv6 and check if IPv6 source and destination \
-| | ... | addresses are correctly translated into IPv4 addresses.
-| | ...
-| | ... | *Arguments:*
-| | ... | - tg_node - Node where to run traffic script. Type: string
-| | ... | - tx_if - Interface from where to send IPv4 UDP packet. Type: string
-| | ... | - rx_if - Interface where to receive IPv6 UDP packet. Type: string
-| | ... | - tx_dst_mac - Destination MAC address of IPv4 packet. Type: string
-| | ... | - tx_src_mac - Source MAC address of IPv4 packet. Type: string
-| | ... | - tx_dst_ipv6 - Destination IPv6 address. Type: string
-| | ... | - tx_src_ipv6 - Source IPv6 address. Type: string
-| | ... | - tx_src_udp_port - Source UDP port. Type: integer
-| | ... | - rx_dst_mac - Expected destination MAC address. Type: string
-| | ... | - rx_src_mac - Expected source MAC address. Type: string
-| | ... | - dst_ipv4 - Expected destination IPv4 address. Type: string
-| | ... | - src_ipv4 - Expected source IPv4 address. Type: string
-| | ...
-| | ... | *Return:*
-| | ... | - No value returned
-| | ...
-| | ... | *Example:*
-| | ...
-| | ... | \| Send IPv6 UDP and check IPv4 headers for MAP-T \
-| | ... | \| port3 \| port4 \| 08:00:27:f3:be:f0 \| 2001:db8:ffff::6400:1 \
-| | ... | \| 2001:db8::14a9:c9db:0 \| ${1232} \| 08:00:27:58:71:eb \
-| | ... | \| 08:00:27:66:b8:57 \| 100.0.0.1 \| 20.169.201.219 \|
-| | ...
-| | [Arguments]
-| | ... | ${tg_node} | ${tx_if} | ${rx_if} | ${tx_dst_mac} | ${tx_src_mac}
-| | ... | ${tx_dst_ipv6} | ${tx_src_ipv6} | ${tx_src_udp_port}
-| | ... | ${rx_dst_mac} | ${rx_src_mac} | ${dst_ipv4} | ${src_ipv4}
-| | ...
-| | ${tx_name}= | Get interface name | ${tg_node} | ${tx_if}
-| | ${rx_name}= | Get interface name | ${tg_node} | ${rx_if}
-| | ${args}= | Catenate
-| | ... | --tx_if | ${tx_name} | --rx_if | ${rx_name}
-| | ... | --tx_dst_mac | ${tx_dst_mac} | --tx_src_mac | ${tx_src_mac}
-| | ... | --tx_src_ipv6 | ${tx_src_ipv6} | --tx_dst_ipv6 | ${tx_dst_ipv6}
-| | ... | --tx_src_udp_port | ${tx_src_udp_port}
-| | ... | --rx_dst_mac | ${rx_dst_mac} | --rx_src_mac | ${rx_src_mac}
-| | ... | --rx_src_ipv4 | ${src_ipv4} | --rx_dst_ipv4 | ${dst_ipv4}
-| | ...
-| | Run Traffic Script On Node
-| | ... | send_ipv6_udp_check_map_t.py | ${tg_node} | ${args}
diff --git a/resources/libraries/robot/performance/performance_configuration.robot b/resources/libraries/robot/performance/performance_configuration.robot
index 5c8313b360..a9b999058b 100644
--- a/resources/libraries/robot/performance/performance_configuration.robot
+++ b/resources/libraries/robot/performance/performance_configuration.robot
@@ -12,108 +12,18 @@
 # limitations under the License.
 
 *** Settings ***
-| Library | Collections
-| Library | String
-| Library | resources.libraries.python.Classify.Classify
 | Library | resources.libraries.python.DpdkUtil
 | Library | resources.libraries.python.InterfaceUtil
 | Library | resources.libraries.python.IPUtil
-| Library | resources.libraries.python.L2Util
 | Library | resources.libraries.python.NodePath
-| Library | resources.libraries.python.topology.Topology
 | Library | resources.libraries.python.TestConfig
 | Library | resources.libraries.python.TrafficGenerator
 | Library | resources.libraries.python.TrafficGenerator.TGDropRateSearchImpl
 | Library | resources.libraries.python.VhostUser
 | ...
-| Resource | resources/libraries/robot/ip/ip4.robot
-| Resource | resources/libraries/robot/ip/ip6.robot
-| Resource | resources/libraries/robot/l2/l2_bridge_domain.robot
-| Resource | resources/libraries/robot/l2/l2_patch.robot
-| Resource | resources/libraries/robot/l2/l2_xconnect.robot
-| Resource | resources/libraries/robot/l2/tagging.robot
-| Resource | resources/libraries/robot/overlay/srv6.robot
-| Resource | resources/libraries/robot/shared/counters.robot
-| Resource | resources/libraries/robot/shared/default.robot
-| Resource | resources/libraries/robot/shared/interfaces.robot
-| ...
 | Documentation | Performance suite keywords - configuration
 
 *** Keywords ***
-| Set interfaces in path up
-| | [Documentation]
-| | ... | *Set UP state on VPP interfaces in path on all DUT nodes and set
-| | ... | maximal MTU.*
-| | ...
-# TODO: Rework KW to set all interfaces in path UP and set MTU (including
-# software interfaces. Run KW at the start phase of VPP setup to split
-# from other "functional" configuration. This will allow modularity of this
-# library
-| | :FOR | ${dut} | IN | @{duts}
-| | | ${if1_status} | ${value}= | Run Keyword And Ignore Error
-| | | ... | Variable Should Exist | ${${dut}_if1}
-| | | Run Keyword If | '${if1_status}' == 'PASS'
-| | | ... | Set Interface State | ${nodes['${dut}']} | ${${dut}_if1} | up
-| | | ... | ELSE
-| | | ... | Set Interface State | ${nodes['${dut}']} | ${${dut}_if1_1} | up
-| | | Run Keyword Unless | '${if1_status}' == 'PASS'
-| | | ... | Set Interface State | ${nodes['${dut}']} | ${${dut}_if1_2} | up
-| | | ${if2_status} | ${value}= | Run Keyword And Ignore Error
-| | | ... | Variable Should Exist | ${${dut}_if2}
-| | | Run Keyword If | '${if2_status}' == 'PASS'
-| | | ... | Set Interface State | ${nodes['${dut}']} | ${${dut}_if2} | up
-| | | ... | ELSE
-| | | ... | Set Interface State | ${nodes['${dut}']} | ${${dut}_if2_1} | up
-| | | Run Keyword Unless | '${if2_status}' == 'PASS'
-| | | ... | Set Interface State | ${nodes['${dut}']} | ${${dut}_if2_2} | up
-| | :FOR | ${dut} | IN | @{duts}
-| | | ${if1_status} | ${value}= | Run Keyword And Ignore Error
-| | | ... | Variable Should Exist | ${${dut}_if1}
-| | | Run Keyword If | '${if1_status}' == 'PASS'
-| | | ... | VPP Set Interface MTU | ${nodes['${dut}']} | ${${dut}_if1}
-| | | ... | ELSE
-| | | ... | VPP Set Interface MTU | ${nodes['${dut}']} | ${${dut}_if1_1}
-| | | Run Keyword Unless | '${if1_status}' == 'PASS'
-| | | ... | VPP Set Interface MTU | ${nodes['${dut}']} | ${${dut}_if1_2}
-| | | ${if2_status} | ${value}= | Run Keyword And Ignore Error
-| | | ... | Variable Should Exist | ${${dut}_if2}
-| | | Run Keyword If | '${if2_status}' == 'PASS'
-| | | ... | VPP Set Interface MTU | ${nodes['${dut}']} | ${${dut}_if2}
-| | | ... | ELSE
-| | | ... | VPP Set Interface MTU | ${nodes['${dut}']} | ${${dut}_if2_1}
-| | | Run Keyword Unless | '${if2_status}' == 'PASS'
-| | | ... | VPP Set Interface MTU | ${nodes['${dut}']} | ${${dut}_if2_2}
-| | All VPP Interfaces Ready Wait | ${nodes} | retries=${300}
-
-| Set single interfaces in path up
-| | [Documentation]
-| | ... | *Set UP state on single VPP interfaces in path on all DUT nodes and set
-| | ... | maximal MTU.*
-| | ...
-# TODO: Rework KW to set all interfaces in path UP and set MTU (including
-# software interfaces. Run KW at the start phase of VPP setup to split
-# from other "functional" configuration. This will allow modularity of this
-# library
-| | :FOR | ${dut} | IN | @{duts}
-| | | ${if1_status} | ${value}= | Run Keyword And Ignore Error
-| | | ... | Variable Should Exist | ${${dut}_if1}
-| | | Run Keyword If | '${if1_status}' == 'PASS'
-| | | ... | Set Interface State | ${nodes['${dut}']} | ${${dut}_if1} | up
-| | | ... | ELSE
-| | | ... | Set Interface State | ${nodes['${dut}']} | ${${dut}_if1_1} | up
-| | | Run Keyword Unless | '${if1_status}' == 'PASS'
-| | | ... | Set Interface State | ${nodes['${dut}']} | ${${dut}_if1_2} | up
-| | :FOR | ${dut} | IN | @{duts}
-| | | ${if1_status} | ${value}= | Run Keyword And Ignore Error
-| | | ... | Variable Should Exist | ${${dut}_if1}
-| | | Run Keyword If | '${if1_status}' == 'PASS'
-| | | ... | VPP Set Interface MTU | ${nodes['${dut}']} | ${${dut}_if1}
-| | | ... | ELSE
-| | | ... | VPP Set Interface MTU | ${nodes['${dut}']} | ${${dut}_if1_1}
-| | | Run Keyword Unless | '${if1_status}' == 'PASS'
-| | | ... | VPP Set Interface MTU | ${nodes['${dut}']} | ${${dut}_if1_2}
-| | All VPP Interfaces Ready Wait | ${nodes}
-
 | Initialize IPSec in 3-node circular topology
 | | [Documentation]
 | | ... | Set UP state on VPP interfaces in path on nodes in 3-node circular
@@ -124,18 +34,6 @@
 | | ... | address.
 | | ...
 | | Set interfaces in path up
-| | ${tg_if1_mac}= | Get Interface MAC | ${tg} | ${tg_if1}
-| | ${tg_if2_mac}= | Get Interface MAC | ${tg} | ${tg_if2}
-| | ${dut1_if1_mac}= | Get Interface MAC | ${dut1} | ${dut1_if1}
-| | ${dut1_if2_mac}= | Get Interface MAC | ${dut1} | ${dut1_if2}
-| | ${dut2_if1_mac}= | Get Interface MAC | ${dut2} | ${dut2_if1}
-| | ${dut2_if2_mac}= | Get Interface MAC | ${dut2} | ${dut2_if2}
-| | Set Test Variable | ${tg_if1_mac}
-| | Set Test Variable | ${tg_if2_mac}
-| | Set Test Variable | ${dut1_if1_mac}
-| | Set Test Variable | ${dut1_if2_mac}
-| | Set Test Variable | ${dut2_if1_mac}
-| | Set Test Variable | ${dut2_if2_mac}
 | | VPP Interface Set IP Address | ${dut1} | ${dut1_if1}
 | | ... | ${dut1_if1_ip4} | 24
 | | VPP Interface Set IP Address | ${dut2} | ${dut2_if2}
@@ -198,13 +96,7 @@
 | | ...
 | | ${prefix}= | Set Variable | 64
 | | ${host_prefix}= | Set Variable | 64
-| | ${tg1_if1_mac}= | Get Interface MAC | ${tg} | ${tg_if1}
-| | ${tg1_if2_mac}= | Get Interface MAC | ${tg} | ${tg_if2}
-| | ${dut1_if2_mac}= | Run Keyword If | '${dut2_status}' == 'PASS'
-| | ... | Get Interface MAC | ${dut1} | ${dut1_if2}
-| | ${dut2_if1_mac}= | Run Keyword If | '${dut2_status}' == 'PASS'
-| | ... | Get Interface MAC | ${dut2} | ${dut2_if1}
-| | VPP Add IP Neighbor | ${dut1} | ${dut1_if1} | 2002:1::1 | ${tg1_if1_mac}
+| | VPP Add IP Neighbor | ${dut1} | ${dut1_if1} | 2002:1::1 | ${tg_if1_mac}
 | | Run Keyword If | '${dut2_status}' == 'PASS'
 | | ... | VPP Add Ip Neighbor
 | | ... | ${dut1} | ${subif_index_1} | 2002:2::2 | ${dut2_if1_mac}
@@ -217,7 +109,7 @@
 | | ${dut_if2}= | Run Keyword If | '${dut2_status}' == 'PASS'
 | | ... | Set Variable | ${dut2_if2}
 | | ... | ELSE | Set Variable | ${subif_index_1}
-| | VPP Add IP Neighbor | ${dut} | ${dut_if2} | 2002:3::1 | ${tg1_if2_mac}
+| | VPP Add IP Neighbor | ${dut} | ${dut_if2} | 2002:3::1 | ${tg_if2_mac}
 | | VPP Interface Set IP Address | ${dut1} | ${dut1_if1} | 2002:1::2 | ${prefix}
 | | Run Keyword If | '${dut2_status}' == 'PASS'
 | | ... | VPP Interface Set IP Address | ${dut1} | ${subif_index_1} | 2002:2::1
@@ -246,10 +138,6 @@
 | | ... | routing for IPv6 for required number of SIDs and configure IPv6 routes
 | | ... | on both DUT nodes.
 | | ...
-| | ${tg1_if1_mac}= | Get Interface MAC | ${tg} | ${tg_if1}
-| | ${tg1_if2_mac}= | Get Interface MAC | ${tg} | ${tg_if2}
-| | ${dut1_if2_mac}= | Get Interface MAC | ${dut1} | ${dut1_if2}
-| | ${dut2_if1_mac}= | Get Interface MAC | ${dut2} | ${dut2_if1}
 | | VPP Interface Set IP Address
 | | ... | ${dut1} | ${dut1_if1} | ${dut1_if1_ip6} | ${prefix}
 | | VPP Interface Set IP Address
@@ -262,9 +150,9 @@
 | | :FOR | ${number} | IN RANGE | 2 | ${dst_addr_nr}+2
 | | | ${hexa_nr}= | Convert To Hex | ${number}
 | | | VPP Add IP Neighbor | ${dut1}
-| | | ... | ${dut1_if1} | ${tg_if1_ip6_subnet}${hexa_nr} | ${tg1_if1_mac}
+| | | ... | ${dut1_if1} | ${tg_if1_ip6_subnet}${hexa_nr} | ${tg_if1_mac}
 | | | VPP Add IP Neighbor | ${dut2}
-| | | ... | ${dut2_if2} | ${tg_if2_ip6_subnet}${hexa_nr} | ${tg1_if2_mac}
+| | | ... | ${dut2_if2} | ${tg_if2_ip6_subnet}${hexa_nr} | ${tg_if2_mac}
 | | VPP Add IP Neighbor
 | | ... | ${dut1} | ${dut1_if2} | ${dut2_if1_ip6} | ${dut2_if1_mac}
 | | VPP Add IP Neighbor
@@ -336,10 +224,6 @@
 | | ... | KW uses test variable rxq_count_int set by KW Add worker threads
 | | ... | and rxqueues to all DUTs
 | | ...
-| | ${tg1_if1_mac}= | Get Interface MAC | ${tg} | ${tg_if1}
-| | ${tg1_if2_mac}= | Get Interface MAC | ${tg} | ${tg_if2}
-| | ${dut1_if2_mac}= | Get Interface MAC | ${dut1} | ${dut1_if2}
-| | ${dut2_if1_mac}= | Get Interface MAC | ${dut2} | ${dut2_if1}
 | | ${sock1}= | Set Variable | memif-DUT1_CNF
 | | ${sock2}= | Set Variable | memif-DUT2_CNF
 | | Set up memif interfaces on DUT node | ${dut1} | ${sock1} | ${sock1}
@@ -352,7 +236,6 @@
 | | ... | ${rxq_count_int}
 | | VPP Set interface MTU | ${dut2} | ${dut2-memif-1-if1}
 | | VPP Set interface MTU | ${dut2} | ${dut2-memif-1-if2}
-| | ${duts}= | Get Matches | ${nodes} | DUT*
 | | :FOR | ${dut} | IN | @{duts}
 | | | Show Memif | ${nodes['${dut}']}
 | | VPP Interface Set IP Address
@@ -377,9 +260,9 @@
 | | VPP Add IP Neighbor
 | | ... | ${dut2} | ${dut2_if1} | ${dut1_if2_ip6} | ${dut1_if2_mac}
 | | VPP Add IP Neighbor
-| | ... | ${dut1} | ${dut1_if1} | ${tg_if1_ip6_subnet}2 | ${tg1_if1_mac}
+| | ... | ${dut1} | ${dut1_if1} | ${tg_if1_ip6_subnet}2 | ${tg_if1_mac}
 | | VPP Add IP Neighbor
-| | ... | ${dut2} | ${dut2_if2} | ${tg_if2_ip6_subnet}2 | ${tg1_if2_mac}
+| | ... | ${dut2} | ${dut2_if2} | ${tg_if2_ip6_subnet}2 | ${tg_if2_mac}
 | | ${dut1-memif-1-if2_mac}= | Get Interface MAC | ${dut1} | memif2
 | | ${dut2-memif-1-if2_mac}= | Get Interface MAC | ${dut2} | memif2
 | | VPP Add IP Neighbor | ${dut1}
@@ -448,7 +331,6 @@
 | | ... | each DUT. Interfaces are brought up.
 | | ...
 | | Set interfaces in path up
-| | ${duts}= | Get Matches | ${nodes} | DUT*
 | | :FOR | ${dut} | IN | @{duts}
 | | | Configure L2patch | ${nodes['${dut}']} | ${${dut}_if1} | ${${dut}_if2}
 
@@ -480,8 +362,6 @@
 | | Set interfaces in path up
 | | VPP Interface Set IP Address | ${dut1} | ${dut1_if2} | 172.16.0.1 | 24
 | | VPP Interface Set IP Address | ${dut2} | ${dut2_if1} | 172.16.0.2 | 24
-| | ${dut1_if2_mac}= | Get Interface MAC | ${dut1} | ${dut1_if2}
-| | ${dut2_if1_mac}= | Get Interface MAC | ${dut2} | ${dut2_if1}
 | | VPP Add IP Neighbor | ${dut1} | ${dut1_if2} | 172.16.0.2 | ${dut2_if1_mac}
 | | VPP Add IP Neighbor | ${dut2} | ${dut2_if1} | 172.16.0.1 | ${dut1_if2_mac}
 | | ${dut1s_vxlan}= | Create VXLAN interface | ${dut1} | 24
@@ -541,7 +421,6 @@
 | | ...
 | | [Arguments] | ${nf_nodes}=${1}
 | | ...
-| | ${duts}= | Get Matches | ${nodes} | DUT*
 | | :FOR | ${dut} | IN | @{duts}
 | | | Initialize L2 xconnect with Vhost-User on node | ${dut}
 | | | ... | nf_nodes=${nf_nodes}
@@ -839,18 +718,11 @@
 | | ...
 | | Set interfaces in path up
 | | ...
-| | ${tg1_if1_mac}= | Get Interface MAC | ${tg} | ${tg_if1}
-| | ${tg1_if2_mac}= | Get Interface MAC | ${tg} | ${tg_if2}
-| | ${dut1_if2_mac}= | Run Keyword If | '${dut2_status}' == 'PASS'
-| | ... | Get Interface MAC | ${dut1} | ${dut1_if2}
-| | ${dut2_if1_mac}= | Run Keyword If | '${dut2_status}' == 'PASS'
-| | ... | Get Interface MAC | ${dut2} | ${dut2_if1}
-| | ...
 | | :FOR | ${number} | IN RANGE | 2 | ${ip_nr}+2
 | | | VPP Add IP Neighbor
-| | | ... | ${dut1} | ${dut1_if1} | 10.10.10.${number} | ${tg1_if1_mac}
+| | | ... | ${dut1} | ${dut1_if1} | 10.10.10.${number} | ${tg_if1_mac}
 | | | VPP Add IP Neighbor
-| | | ... | ${dut} | ${dut_if2} | 20.20.20.${number} | ${tg1_if2_mac}
+| | | ... | ${dut} | ${dut_if2} | 20.20.20.${number} | ${tg_if2_mac}
 | | Run Keyword If | '${dut2_status}' == 'PASS'
 | | ... | VPP Add IP Neighbor
 | | ... | ${dut1} | ${dut1_if2} | 1.1.1.2 | ${dut2_if1_mac}
@@ -1103,8 +975,6 @@
 | | ... | 24
 | | VPP Interface Set IP Address | ${dut2} | ${dut2_if1} | 172.16.0.2
 | | ... | 24
-| | ${dut1_if2_mac}= | Get Interface MAC | ${dut1} | ${dut1_if2}
-| | ${dut2_if1_mac}= | Get Interface MAC | ${dut2} | ${dut2_if1}
 | | VPP Add IP Neighbor | ${dut1} | ${dut1_if2} | 172.16.0.2 | ${dut2_if1_mac}
 | | VPP Add IP Neighbor | ${dut2} | ${dut2_if1} | 172.16.0.1 | ${dut1_if2_mac}
 | | ${dut1s_vxlan}= | Create VXLAN interface | ${dut1} | 24
@@ -1256,8 +1126,6 @@
 | | | ${dut2s_vxlan}= | Create VXLAN interface | ${dut2} | ${vxlan.vni}
 | | | ... | ${dut2_address} | ${vxlan.vtep}
 | | | Add interface to bridge domain | ${dut2} | ${dut2s_vxlan} | ${dut2_bd_id1}
-| | ${tg_if1_mac}= | Get Interface MAC | ${tg} | ${tg_if1}
-| | ${tg_if2_mac}= | Get Interface MAC | ${tg} | ${tg_if2}
 | | VPP Add IP Neighbor | ${dut1} | ${dut1_if1} | ${dut1_gw} | ${tg_if1_mac}
 | | VPP Add IP Neighbor | ${dut2} | ${dut2_if2} | ${dut2_gw} | ${tg_if2_mac}
 | | Vpp Route Add | ${dut1} | ${dut1_route_subnet} | ${dut1_route_mask}
@@ -1479,16 +1347,12 @@
 | | ... | ${dut2_dut1_address} | ${dut2_tg_address} | ${duts_prefix}
 | | ...
 | | Set interfaces in path up
-| | ${tg1_if1_mac}= | Get Interface MAC | ${tg} | ${tg_if1}
-| | ${tg1_if2_mac}= | Get Interface MAC | ${tg} | ${tg_if2}
-| | ${dut1_if2_mac}= | Get Interface MAC | ${dut1} | ${dut1_if2}
-| | ${dut2_if1_mac}= | Get Interface MAC | ${dut2} | ${dut2_if1}
-| | VPP Add IP Neighbor | ${dut1} | ${dut1_if1} | 10.10.10.2 | ${tg1_if1_mac}
+| | VPP Add IP Neighbor | ${dut1} | ${dut1_if1} | 10.10.10.2 | ${tg_if1_mac}
 | | VPP Add IP Neighbor
 | | ... | ${dut1} | ${dut1_if2} | ${dut2_dut1_address} | ${dut2_if1_mac}
 | | VPP Add IP Neighbor
 | | ... | ${dut2} | ${dut2_if1} | ${dut1_dut2_address} | ${dut1_if2_mac}
-| | VPP Add IP Neighbor | ${dut2} | ${dut2_if2} | 20.20.20.2 | ${tg1_if2_mac}
+| | VPP Add IP Neighbor | ${dut2} | ${dut2_if2} | 20.20.20.2 | ${tg_if2_mac}
 | | VPP Interface Set IP Address | ${dut1} | ${dut1_if1}
 | | ... | ${dut1_tg_address} | ${duts_prefix}
 | | VPP Interface Set IP Address | ${dut1} | ${dut1_if2}
@@ -1555,10 +1419,6 @@
 | | ... | ${dut2_dut1_address} | ${dut2_tg_address} | ${prefix}
 | | ...
 | | Set interfaces in path up
-| | ${tg1_if1_mac}= | Get Interface MAC | ${tg} | ${tg_if1}
-| | ${tg1_if2_mac}= | Get Interface MAC | ${tg} | ${tg_if2}
-| | ${dut1_if2_mac}= | Get Interface MAC | ${dut1} | ${dut1_if2}
-| | ${dut2_if1_mac}= | Get Interface MAC | ${dut2} | ${dut2_if1}
 | | VPP Interface Set IP Address
 | | ... | ${dut1} | ${dut1_if1} | ${dut1_tg_address} | ${prefix}
 | | VPP Interface Set IP Address
@@ -1568,8 +1428,8 @@
 | | VPP Interface Set IP Address
 | | ... | ${dut2} | ${dut2_if2} | ${dut2_tg_address} | ${prefix}
 | | Vpp All Ra Suppress Link Layer | ${nodes}
-| | VPP Add IP Neighbor | ${dut1} | ${dut1_if1} | 2001:1::2 | ${tg1_if1_mac}
-| | VPP Add IP Neighbor | ${dut2} | ${dut2_if2} | 2001:2::2 | ${tg1_if2_mac}
+| | VPP Add IP Neighbor | ${dut1} | ${dut1_if1} | 2001:1::2 | ${tg_if1_mac}
+| | VPP Add IP Neighbor | ${dut2} | ${dut2_if2} | 2001:2::2 | ${tg_if2_mac}
 | | VPP Add IP Neighbor
 | | ... | ${dut1} | ${dut1_if2} | ${dut2_dut1_address} | ${dut2_if1_mac}
 | | VPP Add IP Neighbor
@@ -1603,10 +1463,6 @@
 | | ... | ${prefix4} | ${prefix6}
 | | ...
 | | Set interfaces in path up
-| | ${tg1_if1_mac}= | Get Interface MAC | ${tg} | ${tg_if1}
-| | ${tg1_if2_mac}= | Get Interface MAC | ${tg} | ${tg_if2}
-| | ${dut1_if2_mac}= | Get Interface MAC | ${dut1} | ${dut1_if2}
-| | ${dut2_if1_mac}= | Get Interface MAC | ${dut2} | ${dut2_if1}
 | | VPP Interface Set IP Address | ${dut1} | ${dut1_if1}
 | | ... | ${dut1_tg_ip4_address} | ${prefix4}
 | | VPP Interface Set IP Address
@@ -1616,8 +1472,8 @@
 | | VPP Interface Set IP Address | ${dut2} | ${dut2_if2}
 | | ... | ${dut2_tg_ip4_address} | ${prefix4}
 | | Vpp All Ra Suppress Link Layer | ${nodes}
-| | VPP Add IP Neighbor | ${dut1} | ${dut1_if1} | 10.10.10.2 | ${tg1_if1_mac}
-| | VPP Add IP Neighbor | ${dut2} | ${dut2_if2} | 20.20.20.2 | ${tg1_if2_mac}
+| | VPP Add IP Neighbor | ${dut1} | ${dut1_if1} | 10.10.10.2 | ${tg_if1_mac}
+| | VPP Add IP Neighbor | ${dut2} | ${dut2_if2} | 20.20.20.2 | ${tg_if2_mac}
 | | VPP Add IP Neighbor
 | | ... | ${dut1} | ${dut1_if2} | ${dut2_dut1_ip6_address} | ${dut2_if1_mac}
 | | VPP Add IP Neighbor
@@ -1651,10 +1507,6 @@
 | | ... | ${prefix6} | ${prefix4}
 | | ...
 | | Set interfaces in path up
-| | ${tg1_if1_mac}= | Get Interface MAC | ${tg} | ${tg_if1}
-| | ${tg1_if2_mac}= | Get Interface MAC | ${tg} | ${tg_if2}
-| | ${dut1_if2_mac}= | Get Interface MAC | ${dut1} | ${dut1_if2}
-| | ${dut2_if1_mac}= | Get Interface MAC | ${dut2} | ${dut2_if1}
 | | VPP Interface Set IP Address
 | | ... | ${dut1} | ${dut1_if1} | ${dut1_tg_ip6_address} | ${prefix6}
 | | VPP Interface Set IP Address
@@ -1664,8 +1516,8 @@
 | | VPP Interface Set IP Address
 | | ... | ${dut2} | ${dut2_if2} | ${dut2_tg_ip6_address} | ${prefix6}
 | | Vpp All Ra Suppress Link Layer | ${nodes}
-| | VPP Add IP Neighbor | ${dut1} | ${dut1_if1} | 2001:1::2 | ${tg1_if1_mac}
-| | VPP Add IP Neighbor | ${dut2} | ${dut2_if2} | 2001:2::2 | ${tg1_if2_mac}
+| | VPP Add IP Neighbor | ${dut1} | ${dut1_if1} | 2001:1::2 | ${tg_if1_mac}
+| | VPP Add IP Neighbor | ${dut2} | ${dut2_if2} | 2001:2::2 | ${tg_if2_mac}
 | | VPP Add IP Neighbor
 | | ... | ${dut1} | ${dut1_if2} | ${dut2_dut1_ip4_address} | ${dut2_if1_mac}
 | | VPP Add IP Neighbor
@@ -1700,13 +1552,6 @@
 | | ... | ELSE | Set Variable | ${dut1_if2}
 | | VPP Interface Set IP Address | ${dut} | ${dut_if2} | 12.0.0.1 | 20
 | | ...
-| | ${tg_if1_mac}= | Get Interface MAC | ${tg} | ${tg_if1}
-| | ${tg_if2_mac}= | Get Interface MAC | ${tg} | ${tg_if2}
-| | ${dut1_if2_mac}= | Run Keyword If | '${dut2_status}' == 'PASS'
-| | ... | Get Interface MAC | ${dut1} | ${dut1_if2}
-| | ${dut2_if1_mac}= | Run Keyword If | '${dut2_status}' == 'PASS'
-| | ... | Get Interface MAC | ${dut2} | ${dut2_if1}
-| | ...
 | | VPP Add IP Neighbor | ${dut1} | ${dut1_if1} | 10.0.0.2 | ${tg_if1_mac}
 | | Run Keyword If | '${dut2_status}' == 'PASS'
 | | ... | VPP Add IP Neighbor
@@ -1786,7 +1631,6 @@
 | | ...
 | | [Arguments] | ${count}=${1}
 | | ...
-| | ${duts}= | Get Matches | ${nodes} | DUT*
 | | :FOR | ${dut} | IN | @{duts}
 | | | Initialize L2 xconnect with memif pairs on DUT node | ${dut} | ${count}
 | | Set interfaces in path up
@@ -1856,7 +1700,6 @@
 | | ...
 | | [Arguments] | ${nf_chain}=${1} | ${nf_nodes}=${1} | ${auto_scale}=${True}
 | | ...
-| | ${duts}= | Get Matches | ${nodes} | DUT*
 | | :FOR | ${dut} | IN | @{duts}
 | | | Initialize L2 Bridge Domain with memif pairs on DUT node | ${dut}
 | | | ... | nf_chain=${nf_chain} | nf_nodes=${nf_nodes}
@@ -1911,7 +1754,6 @@
 | | ${rxq}= | Run Keyword If | ${auto_scale} == ${True}
 | | ... | Set Variable | ${rxq_count_int}
 | | ... | ELSE | Set Variable | ${1}
-| | ${duts}= | Get Matches | ${nodes} | DUT*
 | | :FOR | ${dut} | IN | @{duts}
 | | | Add interface to bridge domain | ${nodes['${dut}']} | ${${dut}_if1} | ${1}
 | | | Add interface to bridge domain | ${nodes['${dut}']} | ${${dut}_if2} | ${2}
@@ -2058,7 +1900,6 @@
 | | ...
 | | [Arguments] | ${number}=${1}
 | | ...
-| | ${duts}= | Get Matches | ${nodes} | DUT*
 | | :FOR | ${dut} | IN | @{duts}
 | | | ${sock}= | Set Variable | memif-${dut}_CNF
 | | | ${sid}= | Evaluate | (${number} * ${2}) - ${1}
@@ -2092,7 +1933,6 @@
 | | ...
 | | [Arguments] | ${number}=${1}
 | | ...
-| | ${duts}= | Get Matches | ${nodes} | DUT*
 | | :FOR | ${dut} | IN | @{duts}
 | | | ${sock}= | Set Variable | memif-${dut}_CNF
 | | | ${sid}= | Evaluate | (${number} * ${2}) - ${1}
diff --git a/resources/libraries/robot/shared/default.robot b/resources/libraries/robot/shared/default.robot
index f29a26e59a..13370bc6db 100644
--- a/resources/libraries/robot/shared/default.robot
+++ b/resources/libraries/robot/shared/default.robot
@@ -39,9 +39,18 @@
 | Resource | resources/libraries/robot/crypto/ipsec.robot
 | Resource | resources/libraries/robot/features/gbp.robot
 | Resource | resources/libraries/robot/features/policer.robot
+| Resource | resources/libraries/robot/ip/ip4.robot
+| Resource | resources/libraries/robot/ip/ip6.robot
+| Resource | resources/libraries/robot/l2/l2_bridge_domain.robot
+| Resource | resources/libraries/robot/l2/l2_patch.robot
+| Resource | resources/libraries/robot/l2/l2_xconnect.robot
+| Resource | resources/libraries/robot/l2/tagging.robot
+| Resource | resources/libraries/robot/overlay/srv6.robot
 | Resource | resources/libraries/robot/performance/performance_configuration.robot
 | Resource | resources/libraries/robot/performance/performance_limits.robot
 | Resource | resources/libraries/robot/performance/performance_utils.robot
+| Resource | resources/libraries/robot/shared/counters.robot
+| Resource | resources/libraries/robot/shared/interfaces.robot
 | Resource | resources/libraries/robot/shared/container.robot
 | Resource | resources/libraries/robot/shared/suite_teardown.robot
 | Resource | resources/libraries/robot/shared/suite_setup.robot
diff --git a/resources/libraries/robot/shared/interfaces.robot b/resources/libraries/robot/shared/interfaces.robot
index 37eb73991c..ae2aa7b9a8 100644
--- a/resources/libraries/robot/shared/interfaces.robot
+++ b/resources/libraries/robot/shared/interfaces.robot
@@ -13,25 +13,81 @@
 *** Settings ***
 | Library | resources.libraries.python.InterfaceUtil
 | Library | resources.libraries.python.NodePath
-| Library | resources.libraries.python.VatExecutor
 
 *** Keywords ***
-| VPP reports interfaces through VAT on '${node}'
-| | Execute Script | dump_interfaces.vat | ${node}
-| | Script Should Have Passed
+| Set interfaces in path up
+| | [Documentation]
+| | ... | *Set UP state on VPP interfaces in path on all DUT nodes and set
+| | ... | maximal MTU.*
+| | ...
+# TODO: Rework KW to set all interfaces in path UP and set MTU (including
+# software interfaces. Run KW at the start phase of VPP setup to split
+# from other "functional" configuration. This will allow modularity of this
+# library
+| | :FOR | ${dut} | IN | @{duts}
+| | | ${if1_status} | ${value}= | Run Keyword And Ignore Error
+| | | ... | Variable Should Exist | ${${dut}_if1}
+| | | Run Keyword If | '${if1_status}' == 'PASS'
+| | | ... | Set Interface State | ${nodes['${dut}']} | ${${dut}_if1} | up
+| | | ... | ELSE
+| | | ... | Set Interface State | ${nodes['${dut}']} | ${${dut}_if1_1} | up
+| | | Run Keyword Unless | '${if1_status}' == 'PASS'
+| | | ... | Set Interface State | ${nodes['${dut}']} | ${${dut}_if1_2} | up
+| | | ${if2_status} | ${value}= | Run Keyword And Ignore Error
+| | | ... | Variable Should Exist | ${${dut}_if2}
+| | | Run Keyword If | '${if2_status}' == 'PASS'
+| | | ... | Set Interface State | ${nodes['${dut}']} | ${${dut}_if2} | up
+| | | ... | ELSE
+| | | ... | Set Interface State | ${nodes['${dut}']} | ${${dut}_if2_1} | up
+| | | Run Keyword Unless | '${if2_status}' == 'PASS'
+| | | ... | Set Interface State | ${nodes['${dut}']} | ${${dut}_if2_2} | up
+| | :FOR | ${dut} | IN | @{duts}
+| | | ${if1_status} | ${value}= | Run Keyword And Ignore Error
+| | | ... | Variable Should Exist | ${${dut}_if1}
+| | | Run Keyword If | '${if1_status}' == 'PASS'
+| | | ... | VPP Set Interface MTU | ${nodes['${dut}']} | ${${dut}_if1}
+| | | ... | ELSE
+| | | ... | VPP Set Interface MTU | ${nodes['${dut}']} | ${${dut}_if1_1}
+| | | Run Keyword Unless | '${if1_status}' == 'PASS'
+| | | ... | VPP Set Interface MTU | ${nodes['${dut}']} | ${${dut}_if1_2}
+| | | ${if2_status} | ${value}= | Run Keyword And Ignore Error
+| | | ... | Variable Should Exist | ${${dut}_if2}
+| | | Run Keyword If | '${if2_status}' == 'PASS'
+| | | ... | VPP Set Interface MTU | ${nodes['${dut}']} | ${${dut}_if2}
+| | | ... | ELSE
+| | | ... | VPP Set Interface MTU | ${nodes['${dut}']} | ${${dut}_if2_1}
+| | | Run Keyword Unless | '${if2_status}' == 'PASS'
+| | | ... | VPP Set Interface MTU | ${nodes['${dut}']} | ${${dut}_if2_2}
+| | All VPP Interfaces Ready Wait | ${nodes} | retries=${300}
 
-| Configure MTU on TG based on MTU on DUT
-| | [Documentation] | Type of the tg_node must be TG and dut_node must be DUT
-| | [Arguments] | ${tg_node} | ${dut_node}
-| | Append Nodes | ${tg_node} | ${dut_node}
-| | Compute Path
-| | ${tg_port} | ${tg_node}= | First Interface
-| | ${dut_port} | ${dut_node}= | Last Interface
-| | # get physical layer MTU (max. size of Ethernet frame)
-| | ${mtu}= | Get Interface MTU | ${dut_node} | ${dut_port}
-| | # Ethernet MTU is physical layer MTU minus size of Ethernet header and FCS
-| | ${eth_mtu}= | Evaluate | ${mtu} - 14 - 4
-| | Set Interface Ethernet MTU | ${tg_node} | ${tg_port} | ${eth_mtu}
+| Set single interfaces in path up
+| | [Documentation]
+| | ... | *Set UP state on single VPP interfaces in path on all DUT nodes and set
+| | ... | maximal MTU.*
+| | ...
+# TODO: Rework KW to set all interfaces in path UP and set MTU (including
+# software interfaces. Run KW at the start phase of VPP setup to split
+# from other "functional" configuration. This will allow modularity of this
+# library
+| | :FOR | ${dut} | IN | @{duts}
+| | | ${if1_status} | ${value}= | Run Keyword And Ignore Error
+| | | ... | Variable Should Exist | ${${dut}_if1}
+| | | Run Keyword If | '${if1_status}' == 'PASS'
+| | | ... | Set Interface State | ${nodes['${dut}']} | ${${dut}_if1} | up
+| | | ... | ELSE
+| | | ... | Set Interface State | ${nodes['${dut}']} | ${${dut}_if1_1} | up
+| | | Run Keyword Unless | '${if1_status}' == 'PASS'
+| | | ... | Set Interface State | ${nodes['${dut}']} | ${${dut}_if1_2} | up
+| | :FOR | ${dut} | IN | @{duts}
+| | | ${if1_status} | ${value}= | Run Keyword And Ignore Error
+| | | ... | Variable Should Exist | ${${dut}_if1}
+| | | Run Keyword If | '${if1_status}' == 'PASS'
+| | | ... | VPP Set Interface MTU | ${nodes['${dut}']} | ${${dut}_if1}
+| | | ... | ELSE
+| | | ... | VPP Set Interface MTU | ${nodes['${dut}']} | ${${dut}_if1_1}
+| | | Run Keyword Unless | '${if1_status}' == 'PASS'
+| | | ... | VPP Set Interface MTU | ${nodes['${dut}']} | ${${dut}_if1_2}
+| | All VPP Interfaces Ready Wait | ${nodes}
 
 | Get Vhost dump
 | | [Documentation] | Get vhost-user dump.