diff options
author | Peter Mikus <pmikus@cisco.com> | 2018-07-06 06:39:51 +0000 |
---|---|---|
committer | Peter Mikus <pmikus@cisco.com> | 2018-07-09 08:18:03 +0000 |
commit | cc85afad85339d2cc8f035ce63ff21220d8e6b96 (patch) | |
tree | 8c51cf79b31af4544467d6e5f06c91d077648d08 /resources/libraries | |
parent | 92995a7a564c17040483488cbc0da07e28386bdb (diff) |
CSIT-1142 2-node topology - keywords
- Clean up of 2-node setup KWs
Change-Id: I59fc901fb57544eceb6a041b56b515cda8babf85
Signed-off-by: Peter Mikus <pmikus@cisco.com>
Diffstat (limited to 'resources/libraries')
4 files changed, 114 insertions, 141 deletions
diff --git a/resources/libraries/python/ssh.py b/resources/libraries/python/ssh.py index b570003aa8..4bed173bbb 100644 --- a/resources/libraries/python/ssh.py +++ b/resources/libraries/python/ssh.py @@ -325,7 +325,7 @@ class SSH(object): """ chan.close() - def scp(self, local_path, remote_path, get=False, timeout=10): + def scp(self, local_path, remote_path, get=False, timeout=30): """Copy files from local_path to remote_path or vice versa. connect() method has to be called first! diff --git a/resources/libraries/robot/performance/performance_configuration.robot b/resources/libraries/robot/performance/performance_configuration.robot index 21826a2160..ba6396f8fe 100644 --- a/resources/libraries/robot/performance/performance_configuration.robot +++ b/resources/libraries/robot/performance/performance_configuration.robot @@ -96,6 +96,26 @@ | | Vpp Route Add | ${dut1} | ${laddr_ip4} | 8 | ${tg_if1_ip4} | ${dut1_if1} | | Vpp Route Add | ${dut2} | ${raddr_ip4} | 8 | ${tg_if2_ip4} | ${dut2_if2} +| Initialize IPv4 forwarding in 2-node circular topology +| | [Documentation] +| | ... | Set UP state on VPP interfaces in path on nodes in 2-node circular +| | ... | topology. Get the interface MAC addresses and setup ARP on all VPP +| | ... | interfaces. Setup IPv4 addresses with /24 prefix on DUT-TG links and +| | ... | /30 prefix on DUT1 link. Set routing on DUT node with prefix /24 and +| | ... | next hop of neighbour DUT interface IPv4 address. +| | ... +| | Set Interface State | ${dut1} | ${dut1_if1} | up +| | Set Interface State | ${dut1} | ${dut1_if2} | up +| | ${tg1_if1_mac}= | Get Interface MAC | ${tg} | ${tg_if1} +| | ${tg1_if2_mac}= | Get Interface MAC | ${tg} | ${tg_if2} +| | Add arp on dut | ${dut1} | ${dut1_if1} | 10.10.10.2 | ${tg1_if1_mac} +| | Add arp on dut | ${dut1} | ${dut1_if2} | 20.20.20.2 | ${tg1_if2_mac} +| | Configure IP addresses on interfaces | ${dut1} | ${dut1_if1} +| | ... | 10.10.10.1 | 24 +| | Configure IP addresses on interfaces | ${dut1} | ${dut1_if2} +| | ... | 20.20.20.1 | 24 +| | All Vpp Interfaces Ready Wait | ${nodes} + | Initialize IPv4 forwarding in 3-node circular topology | | [Documentation] | | ... | Set UP state on VPP interfaces in path on nodes in 3-node circular @@ -128,26 +148,6 @@ | | Vpp Route Add | ${dut2} | 10.10.10.0 | 24 | 1.1.1.1 | ${dut2_if1} | | All Vpp Interfaces Ready Wait | ${nodes} -| Initialize IPv4 forwarding in 2-node circular topology -| | [Documentation] -| | ... | Set UP state on VPP interfaces in path on nodes in 2-node circular -| | ... | topology. Get the interface MAC addresses and setup ARP on all VPP -| | ... | interfaces. Setup IPv4 addresses with /24 prefix on DUT-TG links and -| | ... | /30 prefix on DUT1 link. Set routing on DUT node with prefix /24 and -| | ... | next hop of neighbour DUT interface IPv4 address. -| | ... -| | Set Interface State | ${dut1} | ${dut1_if1} | up -| | Set Interface State | ${dut1} | ${dut1_if2} | up -| | ${tg1_if1_mac}= | Get Interface MAC | ${tg} | ${tg_if1} -| | ${tg1_if2_mac}= | Get Interface MAC | ${tg} | ${tg_if2} -| | Add arp on dut | ${dut1} | ${dut1_if1} | 10.10.10.3 | ${tg1_if1_mac} -| | Add arp on dut | ${dut1} | ${dut1_if2} | 20.20.20.3 | ${tg1_if2_mac} -| | Configure IP addresses on interfaces | ${dut1} | ${dut1_if1} -| | ... | 10.10.10.2 | 24 -| | Configure IP addresses on interfaces | ${dut1} | ${dut1_if2} -| | ... | 20.20.20.2 | 24 -| | All Vpp Interfaces Ready Wait | ${nodes} - | Initialize IPv4 forwarding with scaling in 3-node circular topology | | [Documentation] | | ... | Custom setup of IPv4 topology with scalability of ip routes on all @@ -781,6 +781,14 @@ | | ... | ELSE | Fail | Unsupported behaviour: ${behavior} | | All Vpp Interfaces Ready Wait | ${nodes} +| Initialize L2 xconnect in 2-node circular topology +| | [Documentation] +| | ... | Setup L2 xconnect topology by cross connecting two interfaces on +| | ... | each DUT. Interfaces are brought up. +| | ... +| | Configure L2XC | ${dut1} | ${dut1_if1} | ${dut1_if2} +| | All Vpp Interfaces Ready Wait | ${nodes} + | Initialize L2 xconnect in 3-node circular topology | | [Documentation] | | ... | Setup L2 xconnect topology by cross connecting two interfaces on @@ -1013,6 +1021,25 @@ | | Configure L2XC | ${dut2} | ${subif_index_2} | ${vhost_if1} | | Configure L2XC | ${dut2} | ${dut2_if2} | ${vhost_if2} +| Initialize L2 bridge domain in 2-node circular topology +| | [Documentation] +| | ... | Setup L2 DB topology by adding two interfaces on DUT into BD +| | ... | that is created automatically with index 1. Learning is enabled. +| | ... | Interfaces are brought up. +| | ... +| | ... | *Arguments:* +| | ... | - bd_id - Bridge domain ID. Type: integer +| | ... +| | ... | *Example:* +| | ... +| | ... | \| Initialize L2 bridge domain in 2-node circular topology \| 1 \| +| | ... +| | [Arguments] | ${bd_id}=${1} +| | ... +| | Add interface to bridge domain | ${dut1} | ${dut1_if1} | ${bd_id} +| | Add interface to bridge domain | ${dut1} | ${dut1_if2} | ${bd_id} +| | All Vpp Interfaces Ready Wait | ${nodes} + | Initialize L2 bridge domain in 3-node circular topology | | [Documentation] | | ... | Setup L2 DB topology by adding two interfaces on each DUT into BD @@ -1766,50 +1793,30 @@ | | Add interface to bridge domain | ${dut2} | ${vhost_if2} | ${bd_id2} | | Add interface to bridge domain | ${dut2} | ${dut2_if2} | ${bd_id2} -| Add PCI devices to DUTs in 3-node single link topology +| Add PCI devices to all DUTs | | [Documentation] | | ... | Add PCI devices to VPP configuration file. | | ... -| | ${dut1_if1_pci}= | Get Interface PCI Addr | ${dut1} | ${dut1_if1} -| | ${dut1_if2_pci}= | Get Interface PCI Addr | ${dut1} | ${dut1_if2} -| | ${dut2_if1_pci}= | Get Interface PCI Addr | ${dut2} | ${dut2_if1} -| | ${dut2_if2_pci}= | Get Interface PCI Addr | ${dut2} | ${dut2_if2} -| | Run keyword | DUT1.Add DPDK Dev | ${dut1_if1_pci} | ${dut1_if2_pci} -| | Run keyword | DUT2.Add DPDK Dev | ${dut2_if1_pci} | ${dut2_if2_pci} -| | Set Test Variable | ${dut1_if1_pci} -| | Set Test Variable | ${dut1_if2_pci} -| | Set Test Variable | ${dut2_if1_pci} -| | Set Test Variable | ${dut2_if2_pci} - -| Add single PCI device to DUTs in 3-node single link topology -| | [Documentation] -| | ... | Add single (first) PCI device on DUT1 to VPP configuration file. -| | ... | Add single (last) PCI device on DUT2 to VPP configuration file. -| | ... -| | ${dut1_if1_pci}= | Get Interface PCI Addr | ${dut1} | ${dut1_if1} -| | ${dut2_if2_pci}= | Get Interface PCI Addr | ${dut2} | ${dut2_if2} -| | Run keyword | DUT1.Add DPDK Dev | ${dut1_if1_pci} -| | Run keyword | DUT2.Add DPDK Dev | ${dut2_if2_pci} -| | Set Test Variable | ${dut1_if1_pci} -| | Set Test Variable | ${dut2_if2_pci} - -| Add PCI devices to DUTs in 2-node single link topology -| | [Documentation] -| | ... | Add PCI devices to VPP configuration file. -| | ... -| | ${dut1_if1_pci}= | Get Interface PCI Addr | ${dut1} | ${dut1_if1} -| | ${dut1_if2_pci}= | Get Interface PCI Addr | ${dut1} | ${dut1_if2} -| | Run keyword | DUT1.Add DPDK Dev | ${dut1_if1_pci} | ${dut1_if2_pci} -| | Set Test Variable | ${dut1_if1_pci} -| | Set Test Variable | ${dut1_if2_pci} +| | ${duts}= | Get Matches | ${nodes} | DUT* +| | :FOR | ${dut} | IN | @{duts} +| | | ${if1_pci}= | Get Interface PCI Addr | ${nodes['${dut}']} | ${${dut}_if1} +| | | ${if2_pci}= | Get Interface PCI Addr | ${nodes['${dut}']} | ${${dut}_if2} +| | | Run keyword | ${dut}.Add DPDK Dev | ${if1_pci} | ${if2_pci} +| | | Set Test Variable | ${${dut}_if1_pci} | ${if1_pci} +| | | Set Test Variable | ${${dut}_if2_pci} | ${if2_pci} -| Add single PCI device to DUTs in 2-node single link topology +| Add single PCI device to all DUTs | | [Documentation] -| | ... | Add single (first) PCI device on DUT1 to VPP configuration file. +| | ... | Add single (first) PCI device on DUT1 and single (last) PCI device on +| | ... | DUT2 to VPP configuration file. | | ... -| | ${dut1_if1_pci}= | Get Interface PCI Addr | ${dut1} | ${dut1_if1} -| | Run keyword | DUT1.Add DPDK Dev | ${dut1_if1_pci} -| | Set Test Variable | ${dut1_if1_pci} +| | ${duts}= | Get Matches | ${nodes} | DUT* +| | :FOR | ${dut} | IN | @{duts} +| | | ${if1_pci}= | Run Keyword If | '${dut}' == 'DUT1' | Get Interface PCI Addr +| | | ... | ${nodes['${dut}']} | ${${dut}_if1} | ELSE | Get Interface PCI Addr +| | | ... | ${nodes['${dut}']} | ${${dut}_if2} +| | | Run keyword | ${dut}.Add DPDK Dev | ${if1_pci} +| | | Set Test Variable | ${${dut}_if1_pci} | ${if1_pci} | Add VLAN Strip Offload switch off between DUTs in 3-node single link topology | | [Documentation] diff --git a/resources/libraries/robot/performance/performance_setup.robot b/resources/libraries/robot/performance/performance_setup.robot index adcdb2173d..3f7eba0393 100644 --- a/resources/libraries/robot/performance/performance_setup.robot +++ b/resources/libraries/robot/performance/performance_setup.robot @@ -484,13 +484,13 @@ # Suite teardowns -| Tear down 3-node performance topology +| Tear down 2-node performance topology | | [Documentation] | | ... | Suite teardown phase with traffic generator teardown. | | ... | | Teardown traffic generator | ${tg} -| Tear down 3-node performance topology with container +| Tear down 2-node performance topology with container | | [Documentation] | | ... | Suite teardown phase with traffic generator teardown and container | | ... | destroy. @@ -499,13 +499,13 @@ | | :FOR | ${group} | IN | @{container_groups} | | | Destroy all '${group}' containers -| Tear down 2-node performance topology +| Tear down 3-node performance topology | | [Documentation] | | ... | Suite teardown phase with traffic generator teardown. | | ... | | Teardown traffic generator | ${tg} -| Tear down 2-node performance topology with container +| Tear down 3-node performance topology with container | | [Documentation] | | ... | Suite teardown phase with traffic generator teardown and container | | ... | destroy. @@ -720,22 +720,22 @@ | | Run keyword unless | ${dut2_node}==${None} | | ... | Tear down guest VM with dpdk-testpmd | ${dut2} | ${dut2_vm_refs} -| Tear down DPDK 3-node performance topology +| Tear down DPDK 2-node performance topology | | [Documentation] | | ... | Suite teardown phase with traffic generator teardown. | | ... | Cleanup DPDK test environment. | | ... | | Teardown traffic generator | ${tg} | | Cleanup DPDK Environment | ${dut1} | ${dut1_if1} | ${dut1_if2} -| | Cleanup DPDK Environment | ${dut2} | ${dut2_if1} | ${dut2_if2} -| Tear down DPDK 2-node performance topology +| Tear down DPDK 3-node performance topology | | [Documentation] | | ... | Suite teardown phase with traffic generator teardown. | | ... | Cleanup DPDK test environment. | | ... | | Teardown traffic generator | ${tg} | | Cleanup DPDK Environment | ${dut1} | ${dut1_if1} | ${dut1_if2} +| | Cleanup DPDK Environment | ${dut2} | ${dut2_if1} | ${dut2_if2} | Tear down performance discovery test with NAT | | [Documentation] | Common test teardown for ndrdisc and pdrdisc performance \ diff --git a/resources/libraries/robot/shared/default.robot b/resources/libraries/robot/shared/default.robot index 4b8c5ecb09..f450dc2a05 100644 --- a/resources/libraries/robot/shared/default.robot +++ b/resources/libraries/robot/shared/default.robot @@ -132,85 +132,51 @@ | | | Run keyword | ${dut}.Add IP6 Heap Size | 4G | | | Run keyword | ${dut}.Add IP Heap Size | 4G -# The following keyword results in lines longer than 80 characters. -# FIXME: Rename the keyword, possibly moving arguments out of the keyword name. +| Add worker threads and rxqueues to all DUTs +| | [Documentation] | Setup worker threads and rxqueues in vpp startup +| | ... | configuration on all DUTs. Based on the SMT configuration of DUT if +| | ... | enabled keyword will automatically map also the sibling logical cores. +| | ... | Keyword will automatically set the appropriate test TAGs in format +| | ... | mTnC, where m=logical_core_count and n=physical_core_count. +| | ... +| | ... | *Arguments:* +| | ... | - cpu_cnt - Number of physical cores to use. Type: integer +| | ... | - rx_queues - Number of RX queues. Type: integer +| | ... +| | ... | *Example:* +| | ... +| | ... | \| Add worker threads and rxqueues to all DUTs \| ${1} \| ${1} \| +| | ... +| | [Arguments] | ${cpu_cnt} | ${rx_queues} +| | ... +| | ${cpu_count_int} | Convert to Integer | ${cpu_cnt} +| | ${thr_count_int} | Convert to Integer | ${cpu_cnt} +| | ${duts}= | Get Matches | ${nodes} | DUT* +| | :FOR | ${dut} | IN | @{duts} +| | | ${numa}= | Get interfaces numa node | ${nodes['${dut}']} +| | | ... | ${${dut}_if1} | ${${dut}_if2} +| | | ${smt_used}= | Is SMT enabled | ${nodes['${dut}']['cpuinfo']} +| | | ${cpu_main}= | Cpu list per node str | ${nodes['${dut}']} | ${numa} +| | | ... | skip_cnt=${1} | cpu_cnt=${1} +| | | ${cpu_wt}= | Cpu list per node str | ${nodes['${dut}']} | ${numa} +| | | ... | skip_cnt=${2} | cpu_cnt=${cpu_count_int} | smt_used=${smt_used} +| | | Run keyword | ${dut}.Add CPU Main Core | ${cpu_main} +| | | Run keyword | ${dut}.Add CPU Corelist Workers | ${cpu_wt} +| | | Run keyword | ${dut}.Add DPDK Dev Default RXQ | ${rx_queues} +| | | ${thr_count_int}= | Run keyword if | ${smt_used} | +| | | ... | Evaluate | int(${cpu_count_int}*2) | ELSE | Set variable +| | | ... | ${thr_count_int} +| | | Run keyword if | ${thr_count_int} > 1 +| | | ... | Set Tags | MTHREAD | ELSE | Set Tags | STHREAD +| | | Set Tags | ${thr_count_int}T${cpu_count_int}C + +# FIXME: Remove the keyword after refactor of suites. Currently kept for +# backward compatibility only. | Add '${m}' worker threads and '${n}' rxqueues in 3-node single-link circular topology | | [Documentation] | Setup M worker threads and N rxqueues in vpp startup\ | | ... | configuration on all DUTs in 3-node single-link topology. | | ... -| | ${m_int}= | Convert To Integer | ${m} -| | ${dut1_numa}= | Get interfaces numa node | ${dut1} -| | ... | ${dut1_if1} | ${dut1_if2} -| | ${dut2_numa}= | Get interfaces numa node | ${dut2} -| | ... | ${dut2_if1} | ${dut2_if2} -| | ${dut1_cpu_main}= | Cpu list per node str | ${dut1} | ${dut1_numa} -| | ... | skip_cnt=${1} | cpu_cnt=${1} -| | ${dut1_cpu_w}= | Cpu list per node str | ${dut1} | ${dut1_numa} -| | ... | skip_cnt=${2} | cpu_cnt=${m_int} -| | ${dut2_cpu_main}= | Cpu list per node str | ${dut2} | ${dut2_numa} -| | ... | skip_cnt=${1} | cpu_cnt=${1} -| | ${dut2_cpu_w}= | Cpu list per node str | ${dut2} | ${dut2_numa} -| | ... | skip_cnt=${2} | cpu_cnt=${m_int} -| | Run keyword | DUT1.Add CPU Main Core | ${dut1_cpu_main} -| | Run keyword | DUT2.Add CPU Main Core | ${dut2_cpu_main} -| | Run keyword | DUT1.Add CPU Corelist Workers | ${dut1_cpu_w} -| | Run keyword | DUT2.Add CPU Corelist Workers | ${dut2_cpu_w} -| | Run keyword | DUT1.Add DPDK Dev Default RXQ | ${n} -| | Run keyword | DUT2.Add DPDK Dev Default RXQ | ${n} - -| Add '${m}' worker threads and '${n}' rxqueues in 2-node single-link circular topology -| | [Documentation] | Setup M worker threads and N rxqueues in vpp startup\ -| | ... | configuration on all DUTs in 2-node single-link topology. -| | ... -| | ${m_int}= | Convert To Integer | ${m} -| | ${dut1_numa}= | Get interfaces numa node | ${dut1} -| | ... | ${dut1_if1} | ${dut1_if2} -| | ${dut1_cpu_main}= | Cpu list per node str | ${dut1} | ${dut1_numa} -| | ... | skip_cnt=${1} | cpu_cnt=${1} -| | ${dut1_cpu_w}= | Cpu list per node str | ${dut1} | ${dut1_numa} -| | ... | skip_cnt=${2} | cpu_cnt=${m_int} -| | Run keyword | DUT1.Add CPU Main Core | ${dut1_cpu_main} -| | Run keyword | DUT1.Add CPU Corelist Workers | ${dut1_cpu_w} -| | Run keyword | DUT1.Add DPDK Dev Default RXQ | ${n} - -| Add '${m}' worker threads using SMT and '${n}' rxqueues in 3-node single-link circular topology -| | [Documentation] | Setup M worker threads using SMT and N rxqueues in vpp\ -| | ... | startup configuration on all DUTs in 3-node single-link topology. -| | ... -| | ${m_int}= | Convert To Integer | ${m} -| | ${dut1_numa}= | Get interfaces numa node | ${dut1} -| | ... | ${dut1_if1} | ${dut1_if2} -| | ${dut2_numa}= | Get interfaces numa node | ${dut2} -| | ... | ${dut2_if1} | ${dut2_if2} -| | ${dut1_cpu_main}= | Cpu list per node str | ${dut1} | ${dut1_numa} -| | ... | skip_cnt=${1} | cpu_cnt=${1} | smt_used=${True} -| | ${dut1_cpu_w}= | Cpu list per node str | ${dut1} | ${dut1_numa} -| | ... | skip_cnt=${2} | cpu_cnt=${m_int} | smt_used=${True} -| | ${dut2_cpu_main}= | Cpu list per node str | ${dut2} | ${dut2_numa} -| | ... | skip_cnt=${1} | cpu_cnt=${1} | smt_used=${True} -| | ${dut2_cpu_w}= | Cpu list per node str | ${dut2} | ${dut2_numa} -| | ... | skip_cnt=${2} | cpu_cnt=${m_int} | smt_used=${True} -| | Run keyword | DUT1.Add CPU Main Core | ${dut1_cpu_main} -| | Run keyword | DUT2.Add CPU Main Core | ${dut2_cpu_main} -| | Run keyword | DUT1.Add CPU Corelist Workers | ${dut1_cpu_w} -| | Run keyword | DUT2.Add CPU Corelist Workers | ${dut2_cpu_w} -| | Run keyword | DUT1.Add DPDK Dev Default RXQ | ${n} -| | Run keyword | DUT2.Add DPDK Dev Default RXQ | ${n} - -| Add '${m}' worker threads using SMT and '${n}' rxqueues in 2-node single-link circular topology -| | [Documentation] | Setup M worker threads and N rxqueues in vpp startup\ -| | ... | configuration on all DUTs in 2-node single-link topology. -| | ... -| | ${m_int}= | Convert To Integer | ${m} -| | ${dut1_numa}= | Get interfaces numa node | ${dut1} -| | ... | ${dut1_if1} | ${dut1_if2} -| | ${dut1_cpu_main}= | Cpu list per node str | ${dut1} | ${dut1_numa} -| | ... | skip_cnt=${1} | cpu_cnt=${1} | smt_used=${True} -| | ${dut1_cpu_w}= | Cpu list per node str | ${dut1} | ${dut1_numa} -| | ... | skip_cnt=${2} | cpu_cnt=${m_int} | smt_used=${True} -| | Run keyword | DUT1.Add CPU Main Core | ${dut1_cpu_main} -| | Run keyword | DUT1.Add CPU Corelist Workers | ${dut1_cpu_w} -| | Run keyword | DUT1.Add DPDK Dev Default RXQ | ${n} +| | Add worker threads and rxqueues to all DUTs | ${m} | ${n} | Add no multi seg to all DUTs | | [Documentation] | Add No Multi Seg to VPP startup configuration to all DUTs. |