Remove: VIRL

Signed-off-by: Peter Mikus <pmikus@cisco.com>
Change-Id: I2b1672412e19f15cb46246fffa931351cd3d518b

1 files changed, 0 insertions, 265 deletions

diff --git a/resources/tools/disk-image-builder/centos/build.sh b/resources/tools/disk-image-builder/centos/build.sh
deleted file mode 100755
index 0276df8d4f..0000000000
--- a/resources/tools/disk-image-builder/centos/build.sh
+++ /dev/null
@@ -1,265 +0,0 @@
-#!/bin/bash -e
-
-# Copyright (c) 2016 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-# Purpose of this script is to build a VirtualBox or QCOW2 disk image
-# for use with CSIT testing.
-#
-# As input parameters, the script takes:
-#
-# - A base Linux distribution (currently, only "ubuntu-14.04.4" is
-#   supported),
-# - A release timestamp in the format "YYYY-MM-DD" eg. "2016-05-21".
-#   This timestamp MUST reference to a list of packages (APT, PIP)
-#   that was previously generated by the "listmaker" VM and script.
-# - A path to the nested VM image.
-#
-# The bullk of the work is done by packer,
-# while this script does some of the pre- and post-processing.
-# Steps executed are:
-#
-# 1.) Determine if building a QCOW or VirtualBox image. Currently,
-#     we build a QCOW image if VIRL_* environment variables are
-#     present (and we therefore assume we are building for VIRL),
-#     or VirtualBox otherwise.
-#
-# 2.) Download packer, if not already installed.
-#
-# 3.) Download APT and PIP packages as required for the image.
-#     We're downloading them here, rather than letting the VM
-#     download them off the public internet, for two reasons:
-#     a.) This allows us to keep and cache packets between runs
-#         and download them only once,
-#     b.) This means only the build host needs a working proxy
-#         configuration and we do not need to worry about setting
-#         a proxy inside the VM.
-#
-# 4.) Link the nested VM image into the main VM's temp directory
-#
-# 5.) Create Version and Changelog files
-#
-# 6.) Run Packer. Packer, in turn, will:
-#     6.1.) Download the Operating System ISO image,
-#     6.2.) Start a VM using the selected hypervisor (VirtualBox or Qemu),
-#     6.3.) Boot the VM using the ISO image and send initial keystrokes
-#           to initiate installation using a Preseed or Kickstart file,
-#     6.4.) Drive the installation using until the point the VM is reachable
-#           over SSH,
-#     6.5.) Copy the temporary directory populated in steps 3-5 above to the VM,
-#     6.6.) Run a script on the VM that performs post-installation:
-#           6.6.1.) Install selected .deb packages
-#           6.6.2.) Install PIP packages as per requirements.txt file
-#           6.6.3.) Install nested VM image and VERSION/CHANGELOG files
-#     6.7.) Run a script on VM that creates a Vagrant user (VirtualBox only)
-#     6.8.) Run a script on VM that performs clean-up:
-#           6.8.1.) Remove any temporary files created,
-#           6.8.2.) Remove SSH host-keys
-#           6.8.3.) Remove root user password
-#           6.8.4.) Shut down the VM
-#     6.9.) [TODO]: Upload the image to VIRL (QCOW only), -or-
-#           Convert the image into a Vagrant box (VirtualBox only), and
-#           [TODO/FIX]: Upload the Vagrant box to Atlas (VirtualBox only)
-#
-# 7.) Clean up
-
-###
-### 0. Set constants and verify parameters.
-###
-cd $(dirname $0)
-BUILD_DIR="$(pwd)/build"
-PACKER_DIR="${BUILD_DIR}/packer"
-
-RPM_CACHE_DIR="${BUILD_DIR}/cache/rpm"
-PIP_CACHE_DIR="${BUILD_DIR}/cache/pip"
-
-PACKER_TEMPLATE="$1.json"
-LISTS_DIR="$(dirname $0)/lists"
-
-function syntax {
-  echo 'Syntax: $0 <Operating System> <Release> <Nested VM image>'
-  echo
-  echo '<Operating System>: Base distro, eg. ubuntu-14.04.4'
-  echo '<Release>:          Release timestamp, eg. 2016-05-21'
-  echo '<Nested VM image>:  Path to nested VM image'
-
-  exit 1
-}
-
-## Parse command line options
-
-OS=$1
-RELDATE=$2
-NESTED_IMG=$3
-
-if [ "$3" = "" ]
-then
-  syntax
-fi
-
-## Identify version by looking at topmost version statement in CHANGELOG
-
-VERSION=$(cat $(dirname $0)/CHANGELOG  | grep '^## ' | head -1 | \
-  sed -e 's/.*\[\(.*\)\].*/\1/')
-if [ "${VERSION}" = "" ]
-then
-  echo "Unable to determine build version from CHANGELOG file. Make sure"
-  echo "that there is an entry for the most recent version in CHANGELOG,"
-  echo "and that the entry is formated like"
-  echo
-  echo "## [1.0] - 2016-05-20"
-  exit 1
-fi
-RELEASE="csit-${OS}_${RELDATE}_${VERSION}"
-
-OUTPUT_DIR="${BUILD_DIR}/output/${RELEASE}"
-LIST="${LISTS_DIR}/${OS}_${RELDATE}_${VERSION}"
-
-if [ ! -d "${LIST}" ]
-then
-  echo "${LIST} not found"
-  syntax
-  exit 1
-fi
-if [ ! -f $NESTED_IMG ]
-then
-  echo "Nested image $NESTED_IMG not found"
-  syntax
-  exit 1
-fi
-
-ATLAS_RELDATE=${RELDATE//-}
-ATLAS_VERSION="${ATLAS_RELDATE}.${VERSION}"
-
-# Find an MD5 checksum utility
-
-MD5UTIL=$(which md5sum) || MD5UTIL=$(which md5)
-if [ $? -ne 0 ]
-then
-  echo "No MD5 utility found."
-  echo "Please make sure you either have \"md5sum\" or \"md5\" installed."
-  exit 1
-fi
-
-###
-### 1. Determine build target.
-###
-if [ "$VIRL_USER" = "" ] || [ "$VIRL_PASSWORD" = "" ]
-then
-  OUTPUT_PROVIDER="virtualbox"
-else
-  OUTPUT_PROVIDER="qemu"
-fi
-
-echo "Building version $VERSION for ${OUTPUT_PROVIDER}"
-echo "Release ${RELEASE}"
-echo "Using Nested VM image: ${NESTED_IMG}"
-echo
-
-
-###
-### 2. Download and extract packer, if not already installed
-###
-packer_os=$(uname -s)
-if [ "$packer_os" = "Darwin" ]
-then
-  packer_url="https://releases.hashicorp.com/packer/0.10.1/packer_0.10.1_darwin_amd64.zip"
-elif [ "$packer_os" = "Linux" ]
-then
-  packer_url="https://releases.hashicorp.com/packer/0.10.1/packer_0.10.1_linux_amd64.zip"
-fi
-
-mkdir -p $BUILD_DIR
-wget -P ${PACKER_DIR} -N ${packer_url}
-
-unzip -n ${PACKER_DIR}/packer*zip -d ${PACKER_DIR}
-
-###
-### 3. Download RPM and PIP packages, and cache them
-###    Verify downloaded RPM packages.
-###    Link required packages into a temp directory for the VM image.
-###
-
-
-rm -fr ${OUTPUT_DIR}
-mkdir -p ${OUTPUT_DIR}/temp/rpm
-mkdir -p ${RPM_CACHE_DIR}
-
-RPM_FILE="${LIST}/rpm-packages.txt"
-REPO_FILE="${LIST}/Centos-Vault.repo"
-###
-### Copy rpm package list to cache dir because we are going to use yum on the image
-###
-echo cp $RPM_FILE ${RPM_CACHE_DIR}
-cp $RPM_FILE ${RPM_CACHE_DIR}
-if [ -e $REPO_FILE ] ; then
-    echo cp $REPO_FILE ${RPM_CACHE_DIR}
-    cp $REPO_FILE ${RPM_CACHE_DIR}
-    ln ${RPM_CACHE_DIR}/Centos-Vault.repo ${OUTPUT_DIR}/temp/rpm/Centos-Vault.repo
-fi
-ln ${RPM_CACHE_DIR}/rpm-packages.txt ${OUTPUT_DIR}/temp/rpm/rpm-packages.txt
-
-## PIP
-
-mkdir -p ${PIP_CACHE_DIR}
-
-# Let PIP do the work of downloading and verifying packages
-pip download -d ${PIP_CACHE_DIR} -r ${LIST}/pip-requirements.txt
-
-# Link packages and requirements file into VM's temp directory
-mkdir -p ${OUTPUT_DIR}/temp/pip
-ln ${PIP_CACHE_DIR}/* ${OUTPUT_DIR}/temp/pip/
-ln ${LIST}/pip-requirements.txt ${OUTPUT_DIR}/temp/requirements.txt
-
-###
-### 4. Link the nested VM image
-###
-rm -fr ${OUTPUT_DIR}/temp/nested-vm
-mkdir ${OUTPUT_DIR}/temp/nested-vm
-ln $NESTED_IMG ${OUTPUT_DIR}/temp/nested-vm/
-
-###
-### 5. Create Version and Changelog files
-###
-
-echo ${RELEASE} > ${OUTPUT_DIR}/temp/VERSION
-ln CHANGELOG ${OUTPUT_DIR}/temp/CHANGELOG
-
-###
-### 6. Run packer
-###
-export PACKER_LOG=1
-export PACKER_LOG_PATH=${OUTPUT_DIR}/packer.log
-${PACKER_DIR}/packer build -var "release=${RELEASE}" \
- -only ${RELEASE}-${OUTPUT_PROVIDER} \
- -var "output_dir=${OUTPUT_DIR}/packer" \
- -var "temp_dir=${OUTPUT_DIR}/temp" \
- -var "atlas_version=${ATLAS_VERSION}" \
- -force \
- -machine-readable ${PACKER_TEMPLATE}
-
-# TODO: Need to figure out "packer push" later. Currently keeps failing.
-# ${PACKER_DIR}/packer push -name ckoester/test123 -var "release=${RELEASE}" \
-#   -var "output_dir=${OUTPUT_DIR}/packer" \
-#   -var "temp_dir=${OUTPUT_DIR}/temp" \
-#   ${PACKER_TEMPLATE}
-
-###
-### 7. Clean up
-###
-rm -fr ${OUTPUT_DIR}/temp
-
-echo "Done."
-echo "Artifacts:"
-echo
-ls -lR ${OUTPUT_DIR}