Remove: VIRL

Signed-off-by: Peter Mikus <pmikus@cisco.com>
Change-Id: I2b1672412e19f15cb46246fffa931351cd3d518b

1 files changed, 0 insertions, 503 deletions

diff --git a/resources/tools/disk-image-builder/ubuntu/html/preseed.cfg b/resources/tools/disk-image-builder/ubuntu/html/preseed.cfg
deleted file mode 100644
index 280757a647..0000000000
--- a/resources/tools/disk-image-builder/ubuntu/html/preseed.cfg
+++ /dev/null
@@ -1,503 +0,0 @@
-#### Contents of the preconfiguration file (for trusty)
-### Localization
-# Preseeding only locale sets language, country and locale.
-d-i debian-installer/locale string en_US
-
-# The values can also be preseeded individually for greater flexibility.
-#d-i debian-installer/language string en
-#d-i debian-installer/country string NL
-#d-i debian-installer/locale string en_GB.UTF-8
-# Optionally specify additional locales to be generated.
-#d-i localechooser/supported-locales multiselect en_US.UTF-8, nl_NL.UTF-8
-
-# Keyboard selection.
-# Disable automatic (interactive) keymap detection.
-d-i console-setup/ask_detect boolean false
-d-i keyboard-configuration/xkb-keymap select us
-# To select a variant of the selected layout:
-#d-i keyboard-configuration/xkb-keymap select us(dvorak)
-# d-i keyboard-configuration/toggle select No toggling
-
-### Network configuration
-# Disable network configuration entirely. This is useful for cdrom
-# installations on non-networked devices where the network questions,
-# warning and long timeouts are a nuisance.
-#d-i netcfg/enable boolean false
-
-# netcfg will choose an interface that has link if possible. This makes it
-# skip displaying a list if there is more than one interface.
-d-i netcfg/choose_interface select auto
-
-# To pick a particular interface instead:
-#d-i netcfg/choose_interface select eth1
-
-# To set a different link detection timeout (default is 3 seconds).
-# Values are interpreted as seconds.
-#d-i netcfg/link_wait_timeout string 10
-
-# If you have a slow dhcp server and the installer times out waiting for
-# it, this might be useful.
-#d-i netcfg/dhcp_timeout string 60
-#d-i netcfg/dhcpv6_timeout string 60
-
-# If you prefer to configure the network manually, uncomment this line and
-# the static network configuration below.
-#d-i netcfg/disable_autoconfig boolean true
-
-# If you want the preconfiguration file to work on systems both with and
-# without a dhcp server, uncomment these lines and the static network
-# configuration below.
-#d-i netcfg/dhcp_failed note
-#d-i netcfg/dhcp_options select Configure network manually
-
-# Static network configuration.
-#
-# IPv4 example
-#d-i netcfg/get_ipaddress string 192.168.1.42
-#d-i netcfg/get_netmask string 255.255.255.0
-#d-i netcfg/get_gateway string 192.168.1.1
-#d-i netcfg/get_nameservers string 192.168.1.1
-#d-i netcfg/confirm_static boolean true
-#
-# IPv6 example
-#d-i netcfg/get_ipaddress string fc00::2
-#d-i netcfg/get_netmask string ffff:ffff:ffff:ffff::
-#d-i netcfg/get_gateway string fc00::1
-#d-i netcfg/get_nameservers string fc00::1
-#d-i netcfg/confirm_static boolean true
-
-# Any hostname and domain names assigned from dhcp take precedence over
-# values set here. However, setting the values still prevents the questions
-# from being shown, even if values come from dhcp.
-d-i netcfg/get_hostname string unassigned-hostname
-d-i netcfg/get_domain string unassigned-domain
-
-# If you want to force a hostname, regardless of what either the DHCP
-# server returns or what the reverse DNS entry for the IP is, uncomment
-# and adjust the following line.
-#d-i netcfg/hostname string somehost
-
-# Disable that annoying WEP key dialog.
-d-i netcfg/wireless_wep string
-# The wacky dhcp hostname that some ISPs use as a password of sorts.
-#d-i netcfg/dhcp_hostname string radish
-
-# If non-free firmware is needed for the network or other hardware, you can
-# configure the installer to always try to load it, without prompting. Or
-# change to false to disable asking.
-#d-i hw-detect/load_firmware boolean true
-
-### Network console
-# Use the following settings if you wish to make use of the network-console
-# component for remote installation over SSH. This only makes sense if you
-# intend to perform the remainder of the installation manually.
-#d-i anna/choose_modules string network-console
-#d-i network-console/authorized_keys_url string http://10.0.0.1/openssh-key
-#d-i network-console/password password r00tme
-#d-i network-console/password-again password r00tme
-# Use this instead if you prefer to use key-based authentication
-#d-i network-console/authorized_keys_url http://host/authorized_keys
-
-### Mirror settings
-# If you select ftp, the mirror/country string does not need to be set.
-#d-i mirror/protocol string ftp
-#d-i mirror/country string manual
-#d-i mirror/http/hostname string archive.ubuntu.com
-#d-i mirror/http/directory string /ubuntu
-#d-i mirror/http/proxy string
-
-# Alternatively: by default, the installer uses CC.archive.ubuntu.com where
-# CC is the ISO-3166-2 code for the selected country. You can preseed this
-# so that it does so without asking.
-#d-i mirror/http/mirror select CC.archive.ubuntu.com
-
-# Suite to install.
-#d-i mirror/suite string trusty
-# Suite to use for loading installer components (optional).
-#d-i mirror/udeb/suite string trusty
-# Components to use for loading installer components (optional).
-#d-i mirror/udeb/components multiselect main, restricted
-
-### Account setup
-# Skip creation of a root account (normal user account will be able to
-# use sudo). The default is false; preseed this to true if you want to set
-# a root password.
-d-i passwd/root-login boolean true
-# Alternatively, to skip creation of a normal user account.
-d-i passwd/make-user boolean false
-
-# Root password, either in clear text
-d-i passwd/root-password password csit
-d-i passwd/root-password-again password csit
-# or encrypted using a crypt(3)  hash.
-#d-i passwd/root-password-crypted password [crypt(3) hash]
-
-# To create a normal user account.
-#d-i passwd/user-fullname string Ubuntu User
-#d-i passwd/username string ubuntu
-# Normal user's password, either in clear text
-#d-i passwd/user-password password insecure
-#d-i passwd/user-password-again password insecure
-# or encrypted using a crypt(3) hash.
-#d-i passwd/user-password-crypted password [crypt(3) hash]
-# Create the first user with the specified UID instead of the default.
-#d-i passwd/user-uid string 1010
-# The installer will warn about weak passwords. If you are sure you know
-# what you're doing and want to override it, uncomment this.
-#d-i user-setup/allow-password-weak boolean true
-#d-i passwd/user-fullname string Packer - Temp User
-#d-i passwd/username string packer
-#d-i passwd/user-password password packer
-#d-i passwd/user-password-again password packer
-d-i user-setup/allow-password-weak boolean true
-
-# The user account will be added to some standard initial groups. To
-# override that, use this.
-#d-i passwd/user-default-groups string audio cdrom video
-
-# Set to true if you want to encrypt the first user's home directory.
-d-i user-setup/encrypt-home boolean false
-
-### Clock and time zone setup
-# Controls whether or not the hardware clock is set to UTC.
-d-i clock-setup/utc boolean true
-
-# You may set this to any valid setting for $TZ; see the contents of
-# /usr/share/zoneinfo/ for valid values.
-d-i time/zone string US/Eastern
-
-# Controls whether to use NTP to set the clock during the install
-d-i clock-setup/ntp boolean false
-# NTP server to use. The default is almost always fine here.
-#d-i clock-setup/ntp-server string ntp.example.com
-
-### Partitioning
-## Partitioning example
-# If the system has free space you can choose to only partition that space.
-# This is only honoured if partman-auto/method (below) is not set.
-# Alternatives: custom, some_device, some_device_crypto, some_device_lvm.
-#d-i partman-auto/init_automatically_partition select biggest_free
-
-# Alternatively, you may specify a disk to partition. If the system has only
-# one disk the installer will default to using that, but otherwise the device
-# name must be given in traditional, non-devfs format (so e.g. /dev/sda
-# and not e.g. /dev/discs/disc0/disc).
-# For example, to use the first SCSI/SATA hard disk:
-#d-i partman-auto/disk string /dev/sda
-# In addition, you'll need to specify the method to use.
-# The presently available methods are:
-# - regular: use the usual partition types for your architecture
-# - lvm:     use LVM to partition the disk
-# - crypto:  use LVM within an encrypted partition
-#d-i partman-auto/method string lvm
-d-i partman-auto/method string regular
-
-# If one of the disks that are going to be automatically partitioned
-# contains an old LVM configuration, the user will normally receive a
-# warning. This can be preseeded away...
-#d-i partman-lvm/device_remove_lvm boolean true
-# The same applies to pre-existing software RAID array:
-#d-i partman-md/device_remove_md boolean true
-# And the same goes for the confirmation to write the lvm partitions.
-#d-i partman-lvm/confirm boolean true
-#d-i partman-lvm/confirm_nooverwrite boolean true
-
-# For LVM partitioning, you can select how much of the volume group to use
-# for logical volumes.
-#d-i partman-auto-lvm/guided_size string max
-#d-i partman-auto-lvm/guided_size string 10GB
-#d-i partman-auto-lvm/guided_size string 50%
-
-# You can choose one of the three predefined partitioning recipes:
-# - atomic: all files in one partition
-# - home:   separate /home partition
-# - multi:  separate /home, /var, and /tmp partitions
-#d-i partman-auto/choose_recipe select atomic
-
-# Or provide a recipe of your own...
-# If you have a way to get a recipe file into the d-i environment, you can
-# just point at it.
-#d-i partman-auto/expert_recipe_file string /hd-media/recipe
-
-d-i partman-basicfilesystems/no_swap boolean false
-d-i partman-auto/expert_recipe string myroot :: 1000 50 -1 ext4 \
-     $primary{ } $bootable{ } method{ format }                  \
-     format{ } use_filesystem{ } filesystem{ ext4 }             \
-     mountpoint{ / }                                            \
-    .
-d-i partman-auto/choose_recipe select myroot
-
-# If not, you can put an entire recipe into the preconfiguration file in one
-# (logical) line. This example creates a small /boot partition, suitable
-# swap, and uses the rest of the space for the root partition:
-#d-i partman-auto/expert_recipe string                         \
-#      boot-root ::                                            \
-#              40 50 100 ext3                                  \
-#                      $primary{ } $bootable{ }                \
-#                      method{ format } format{ }              \
-#                      use_filesystem{ } filesystem{ ext3 }    \
-#                      mountpoint{ /boot }                     \
-#              .                                               \
-#              500 10000 1000000000 ext3                       \
-#                      method{ format } format{ }              \
-#                      use_filesystem{ } filesystem{ ext3 }    \
-#                      mountpoint{ / }                         \
-#              .                                               \
-#              64 512 300% linux-swap                          \
-#                      method{ swap } format{ }                \
-#              .
-
-# If you just want to change the default filesystem from ext3 to something
-# else, you can do that without providing a full recipe.
-#d-i partman/default_filesystem string ext4
-
-# The full recipe format is documented in the file partman-auto-recipe.txt
-# included in the 'debian-installer' package or available from D-I source
-# repository. This also documents how to specify settings such as file
-# system labels, volume group names and which physical devices to include
-# in a volume group.
-
-# This makes partman automatically partition without confirmation, provided
-# that you told it what to do using one of the methods above.
-d-i partman-partitioning/confirm_write_new_label boolean true
-d-i partman/choose_partition select finish
-d-i partman/confirm boolean true
-d-i partman/confirm_nooverwrite boolean true
-
-## Partitioning using RAID
-# The method should be set to "raid".
-#d-i partman-auto/method string raid
-# Specify the disks to be partitioned. They will all get the same layout,
-# so this will only work if the disks are the same size.
-#d-i partman-auto/disk string /dev/sda /dev/sdb
-
-# Next you need to specify the physical partitions that will be used. 
-#d-i partman-auto/expert_recipe string \
-#      multiraid ::                                         \
-#              1000 5000 4000 raid                          \
-#                      $primary{ } method{ raid }           \
-#              .                                            \
-#              64 512 300% raid                             \
-#                      method{ raid }                       \
-#              .                                            \
-#              500 10000 1000000000 raid                    \
-#                      method{ raid }                       \
-#              .
-
-# Last you need to specify how the previously defined partitions will be
-# used in the RAID setup. Remember to use the correct partition numbers
-# for logical partitions. RAID levels 0, 1, 5, 6 and 10 are supported;
-# devices are separated using "#".
-# Parameters are:
-# <raidtype> <devcount> <sparecount> <fstype> <mountpoint> \
-#          <devices> <sparedevices>
-
-#d-i partman-auto-raid/recipe string \
-#    1 2 0 ext3 /                    \
-#          /dev/sda1#/dev/sdb1       \
-#    .                               \
-#    1 2 0 swap -                    \
-#          /dev/sda5#/dev/sdb5       \
-#    .                               \
-#    0 2 0 ext3 /home                \
-#          /dev/sda6#/dev/sdb6       \
-#    .
-
-# For additional information see the file partman-auto-raid-recipe.txt
-# included in the 'debian-installer' package or available from D-I source
-# repository.
-
-# This makes partman automatically partition without confirmation.
-d-i partman-md/confirm boolean true
-d-i partman-partitioning/confirm_write_new_label boolean true
-d-i partman/choose_partition select finish
-d-i partman/confirm boolean true
-d-i partman/confirm_nooverwrite boolean true
-
-## Controlling how partitions are mounted
-# The default is to mount by UUID, but you can also choose "traditional" to
-# use traditional device names, or "label" to try filesystem labels before
-# falling back to UUIDs.
-#d-i partman/mount_style select uuid
-d-i partman/mount_style select traditional
-
-### Base system installation
-# Configure a path to the preconfigured base filesystem. This can be used to
-# specify a path for the installer to retrieve the filesystem image that will
-# be deployed to disk and used as a base system for the installation.
-#d-i live-installer/net-image string /install/filesystem.squashfs
- 
-# Configure APT to not install recommended packages by default. Use of this
-# option can result in an incomplete system and should only be used by very
-# experienced users.
-#d-i base-installer/install-recommends boolean false
-
-# The kernel image (meta) package to be installed; "none" can be used if no
-# kernel is to be installed.
-#d-i base-installer/kernel/image string linux-generic
-
-### Apt setup
-# You can choose to install restricted and universe software, or to install
-# software from the backports repository.
-#d-i apt-setup/restricted boolean true
-#d-i apt-setup/universe boolean true
-#d-i apt-setup/backports boolean true
-# Uncomment this if you don't want to use a network mirror.
-d-i apt-setup/use_mirror boolean false
-d-i apt-setup/services-select-ubuntu multiselect ""
-
-# Select which update services to use; define the mirrors to be used.
-# Values shown below are the normal defaults.
-#d-i apt-setup/services-select multiselect security
-#d-i apt-setup/security_host string security.ubuntu.com
-#d-i apt-setup/security_path string /ubuntu
-
-# Additional repositories, local[0-9] available
-#d-i apt-setup/local0/repository string \
-#       http://local.server/ubuntu trusty main
-#d-i apt-setup/local0/comment string local server
-# Enable deb-src lines
-#d-i apt-setup/local0/source boolean true
-# URL to the public key of the local repository; you must provide a key or
-# apt will complain about the unauthenticated repository and so the
-# sources.list line will be left commented out
-#d-i apt-setup/local0/key string http://local.server/key
-
-# By default the installer requires that repositories be authenticated
-# using a known gpg key. This setting can be used to disable that
-# authentication. Warning: Insecure, not recommended.
-#d-i debian-installer/allow_unauthenticated boolean true
-
-# Uncomment this to add multiarch configuration for i386
-#d-i apt-setup/multiarch string i386
-
-
-### Package selection
-#tasksel tasksel/first multiselect ubuntu-desktop
-#tasksel tasksel/first multiselect lamp-server, print-server
-#tasksel tasksel/first multiselect kubuntu-desktop
-tasksel tasksel/first multiselect server
-tasksel tasksel/first multiselect ssh-server
-
-# Individual additional packages to install
-#d-i pkgsel/include string openssh-server build-essential
-d-i pkgsel/include string openssh-server
-# Whether to upgrade packages after debootstrap.
-# Allowed values: none, safe-upgrade, full-upgrade
-d-i pkgsel/upgrade select none
-
-# Language pack selection
-#d-i pkgsel/language-packs multiselect de, en, zh
-
-# Policy for applying updates. May be "none" (no automatic updates),
-# "unattended-upgrades" (install security updates automatically), or
-# "landscape" (manage system with Landscape).
-d-i pkgsel/update-policy select none
-
-# Some versions of the installer can report back on what software you have
-# installed, and what software you use. The default is not to report back,
-# but sending reports helps the project determine what software is most
-# popular and include it on CDs.
-#popularity-contest popularity-contest/participate boolean false
-
-# By default, the system's locate database will be updated after the
-# installer has finished installing most packages. This may take a while, so
-# if you don't want it, you can set this to "false" to turn it off.
-d-i pkgsel/updatedb boolean false
-
-### Boot loader installation
-# Grub is the default boot loader (for x86). If you want lilo installed
-# instead, uncomment this:
-#d-i grub-installer/skip boolean true
-# To also skip installing lilo, and install no bootloader, uncomment this
-# too:
-#d-i lilo-installer/skip boolean true
-
-
-# This is fairly safe to set, it makes grub install automatically to the MBR
-# if no other operating system is detected on the machine.
-d-i grub-installer/only_debian boolean true
-
-# This one makes grub-installer install to the MBR if it also finds some other
-# OS, which is less safe as it might not be able to boot that other OS.
-d-i grub-installer/with_other_os boolean true
-
-# Due notably to potential USB sticks, the location of the MBR can not be
-# determined safely in general, so this needs to be specified:
-#d-i grub-installer/bootdev  string /dev/sda
-# To install to the first device (assuming it is not a USB stick):
-#d-i grub-installer/bootdev  string default
-
-# Alternatively, if you want to install to a location other than the mbr,
-# uncomment and edit these lines:
-#d-i grub-installer/only_debian boolean false
-#d-i grub-installer/with_other_os boolean false
-#d-i grub-installer/bootdev  string (hd0,1)
-# To install grub to multiple disks:
-#d-i grub-installer/bootdev  string (hd0,1) (hd1,1) (hd2,1)
-
-# Optional password for grub, either in clear text
-#d-i grub-installer/password password r00tme
-#d-i grub-installer/password-again password r00tme
-# or encrypted using an MD5 hash, see grub-md5-crypt(8).
-#d-i grub-installer/password-crypted password [MD5 hash]
-
-# Use the following option to add additional boot parameters for the
-# installed system (if supported by the bootloader installer).
-# Note: options passed to the installer will be added automatically.
-#d-i debian-installer/add-kernel-opts string nousb
-
-### Finishing up the installation
-# During installations from serial console, the regular virtual consoles
-# (VT1-VT6) are normally disabled in /etc/inittab. Uncomment the next
-# line to prevent this.
-#d-i finish-install/keep-consoles boolean true
-
-# Avoid that last message about the install being complete.
-d-i finish-install/reboot_in_progress note
-
-# This will prevent the installer from ejecting the CD during the reboot,
-# which is useful in some situations.
-#d-i cdrom-detect/eject boolean false
-
-# This is how to make the installer shutdown when finished, but not
-# reboot into the installed system.
-#d-i debian-installer/exit/halt boolean true
-# This will power off the machine instead of just halting it.
-#d-i debian-installer/exit/poweroff boolean true
-
-### Preseeding other packages
-# Depending on what software you choose to install, or if things go wrong
-# during the installation process, it's possible that other questions may
-# be asked. You can preseed those too, of course. To get a list of every
-# possible question that could be asked during an install, do an
-# installation, and then run these commands:
-#   debconf-get-selections --installer > file
-#   debconf-get-selections >> file
-
-
-#### Advanced options
-### Running custom commands during the installation
-# d-i preseeding is inherently not secure. Nothing in the installer checks
-# for attempts at buffer overflows or other exploits of the values of a
-# preconfiguration file like this one. Only use preconfiguration files from
-# trusted locations! To drive that home, and because it's generally useful,
-# here's a way to run any shell command you'd like inside the installer,
-# automatically.
-
-# This first command is run as early as possible, just after
-# preseeding is read.
-#d-i preseed/early_command string anna-install some-udeb
-# This command is run immediately before the partitioner starts. It may be
-# useful to apply dynamic partitioner preseeding that depends on the state
-# of the disks (which may not be visible when preseed/early_command runs).
-#d-i partman/early_command \
-#       string debconf-set partman-auto/disk "$(list-devices disk | head -n1)"
-# This command is run just before the install finishes, but when there is
-# still a usable /target directory. You can chroot to /target and use it
-# directly, or use the apt-install and in-target commands to easily install
-# packages and run commands in the target system.
-#d-i preseed/late_command string apt-install zsh; in-target chsh -s /bin/zsh
-
-d-i preseed/late_command string \
-    in-target sed -i /etc/ssh/sshd_config -e 's/[# ]*PermitRootLogin.*/PermitRootLogin yes/' ;