Remove: VIRL

Signed-off-by: Peter Mikus <pmikus@cisco.com>
Change-Id: I2b1672412e19f15cb46246fffa931351cd3d518b

7 files changed, 0 insertions, 322 deletions

diff --git a/resources/tools/disk-image-builder/ubuntu/scripts-remote/cleanup.sh b/resources/tools/disk-image-builder/ubuntu/scripts-remote/cleanup.sh
deleted file mode 100644
index 4c713a581f..0000000000
--- a/resources/tools/disk-image-builder/ubuntu/scripts-remote/cleanup.sh
+++ /dev/null
@@ -1,40 +0,0 @@
-#!/bin/sh -e
-
-# Copyright (c) 2018 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-echo "********** CLEANING UP **********"
-
-# Clean up host keys only if we're using cloud-init
-# (which will generate new keys upon next boot). This
-# currently applies to Qemu build only.
-
-if dpkg -s cloud-init > /dev/null 2>&1
-then
-  rm -f /etc/ssh/ssh_host_*
-fi
-
-# Remove root's password, old resolv.conf and DHCP lease
-passwd -d root
-passwd -l root
-rm -f /etc/resolv.conf
-# Disabling due to bug in dhclient
-# https://bugs.launchpad.net/ubuntu/+source/systemd/+bug/1779721
-# This is causing problem that dhclient is not running properly.
-#pkill dhclient
-rm -f /var/lib/dhcp/*leases
-
-echo "********** SCHEDULING SHUTDOWN IN 1 MINUTE **********"
-sync
-shutdown -h +1
-exit
diff --git a/resources/tools/disk-image-builder/ubuntu/scripts-remote/disable_ipv6.sh b/resources/tools/disk-image-builder/ubuntu/scripts-remote/disable_ipv6.sh
deleted file mode 100644
index 43e59787a7..0000000000
--- a/resources/tools/disk-image-builder/ubuntu/scripts-remote/disable_ipv6.sh
+++ /dev/null
@@ -1,21 +0,0 @@
-#!/bin/sh -e
-
-# Copyright (c) 2017 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-
-echo "********** Disabling IPv6 ***********"
-# Disable on all existing interfaces
-echo net.ipv6.conf.all.IPv6_disable=1 > /etc/sysctl.d/10-IPv6_disable.conf
-# Disable by default for any new interfaces
-echo net.ipv6.conf.default.IPv6_disable=1 >> /etc/sysctl.d/10-IPv6_disable.conf
\ No newline at end of file
diff --git a/resources/tools/disk-image-builder/ubuntu/scripts-remote/post-install.sh b/resources/tools/disk-image-builder/ubuntu/scripts-remote/post-install.sh
deleted file mode 100644
index b69e0e2350..0000000000
--- a/resources/tools/disk-image-builder/ubuntu/scripts-remote/post-install.sh
+++ /dev/null
@@ -1,98 +0,0 @@
-#!/bin/sh -e
-
-# Copyright (c) 2016 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-TEMP_PATH="/root/temp"
-
-###
-### APT
-###
-echo "********** INSTALLING APT PACKAGES **********"
-echo -n > /etc/apt/sources.list
-
-export DEBIAN_FRONTEND=noninteractive
-
-# We're doing this the hard way as we're dealing with a bunch of
-# .deb packages rather than any sources organized through APT.
-
-# Attempt up to five cycles of unpack/configure. There may be dependency
-# problems during the first one(s).
-
-attempt=1
-MAX_ATTEMPTS=5
-try_again=1
-
-while [ $attempt -le $MAX_ATTEMPTS ] && [ $try_again -eq 1 ]
-do
-  try_again=0
-  echo "Attempting .deb package installation, attempt #${attempt}/${MAX_ATTEMPTS}"
-  dpkg --unpack --recursive --skip-same-version ${TEMP_PATH}/deb || try_again=1
-  dpkg --configure --pending || try_again=1
-  if [ $try_again -eq 1 ]
-  then
-    echo Encountered errors.
-  fi
-  attempt=$(( $attempt + 1 ))
-done
-
-if [ $try_again -eq 1 ]
-then
-  echo "Still encountered errors after ${MAX_ATTEMPTS} attempts. Aborting".
-  exit 1
-fi
-
-##
-## PIP
-##
-echo "********** INSTALLING PIP PACKAGES **********"
-pip install --no-index --find-links ${TEMP_PATH}/pip/ -r ${TEMP_PATH}/requirements.txt
-
-
-echo "********** CREATING HISTORIC LINK FOR QEMU, COPY NESTED VM IMAGE **********"
-mkdir -p /opt/qemu/bin
-ln -s /usr/bin/qemu-system-x86_64 /opt/qemu/bin/qemu-system-x86_64
-
-mkdir -p /var/lib/vm
-
-echo "Embedding nested VM image on this image"
-mkdir /var/lib/vm/images
-cp ${TEMP_PATH}/nested-vm/* /var/lib/vm/images/
-# There should only be one file at this time
-ln -s /var/lib/vm/images/* /var/lib/vm/vhost-nested.img
-
-ls -lR /var/lib/vm
-
-# Mount hugepages directory for nested VM
-mkdir -p /mnt/huge
-echo 'hugetlbfs	/mnt/huge	hugetlbfs	mode=1770,gid=111	0	0' >> /etc/fstab
-
-##
-## Java
-##
-echo "********** CREATING JAVA SHELL PROFILE **********"
-mkdir -p /etc/profile.d
-echo 'export JAVA_HOME=/usr/lib/jvm/java-8-openjdk-amd64' > /etc/profile.d/java.sh
-echo 'export PATH=$JAVA_HOME/bin:$PATH' >> /etc/profile.d/java.sh
-
-
-##
-## Changelog
-##
-echo "********** MOVING CHANGELOG AND VERSION FILES **********"
-
-mv ${TEMP_PATH}/VERSION /
-mv ${TEMP_PATH}/CHANGELOG /
-
-echo "********** CLEANING UP **********"
-rm -fr ${TEMP_PATH}
diff --git a/resources/tools/disk-image-builder/ubuntu/scripts-remote/serial-console-ubuntu-14.04.4.sh b/resources/tools/disk-image-builder/ubuntu/scripts-remote/serial-console-ubuntu-14.04.4.sh
deleted file mode 100644
index 52879048ac..0000000000
--- a/resources/tools/disk-image-builder/ubuntu/scripts-remote/serial-console-ubuntu-14.04.4.sh
+++ /dev/null
@@ -1,57 +0,0 @@
-#!/bin/sh -e
-
-# Copyright (c) 2016 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-##
-## Serial console
-##
-echo "********** CONFIGURING SERIAL CONSOLE AND DISABLING IPV6 **********"
-cat - > /etc/init/ttyS0.conf <<"_EOF"
-# ttyS0 - getty
-#
-# This service maintains a getty on ttyS0 from the point the system is
-# started until it is shut down again.
-
-start on stopped rc RUNLEVEL=[12345]
-stop on runlevel [!12345]
-
-respawn
-exec /sbin/getty -L 115200 ttyS0 vt102
-_EOF
-
-cat - > /etc/default/grub <<"_EOF"
-# If you change this file, run 'update-grub' afterwards to update
-# /boot/grub/grub.cfg.
-# For full documentation of the options in this file, see:
-#   info -f grub -n 'Simple configuration'
-
-GRUB_DEFAULT=0
-GRUB_TIMEOUT=1
-GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
-GRUB_CMDLINE_LINUX="console=tty0 console=ttyS0,115200n8 ipv6.disable=1"
-
-GRUB_TERMINAL=serial
-GRUB_SERIAL_COMMAND="serial --speed=115200 --unit=0 --word=8 --parity=no --stop=1"
-
-# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
-#GRUB_DISABLE_LINUX_UUID=true
-
-# Uncomment to disable generation of recovery mode menu entries
-#GRUB_DISABLE_RECOVERY="true"
-
-# Uncomment to get a beep at grub start
-#GRUB_INIT_TUNE="480 440 1"
-_EOF
-
-update-grub
diff --git a/resources/tools/disk-image-builder/ubuntu/scripts-remote/serial-console-ubuntu-16.04.1.sh b/resources/tools/disk-image-builder/ubuntu/scripts-remote/serial-console-ubuntu-16.04.1.sh
deleted file mode 100644
index 13ef63c2a9..0000000000
--- a/resources/tools/disk-image-builder/ubuntu/scripts-remote/serial-console-ubuntu-16.04.1.sh
+++ /dev/null
@@ -1,44 +0,0 @@
-#!/bin/sh -e
-
-# Copyright (c) 2017 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-##
-## Serial console
-##
-echo "********** CONFIGURING SERIAL CONSOLE **********"
-cat - > /etc/default/grub <<"_EOF"
-# If you change this file, run 'update-grub' afterwards to update
-# /boot/grub/grub.cfg.
-# For full documentation of the options in this file, see:
-#   info -f grub -n 'Simple configuration'
-
-GRUB_DEFAULT=0
-GRUB_TIMEOUT=1
-GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
-GRUB_CMDLINE_LINUX="console=tty0 console=ttyS0,115200n8"
-
-GRUB_TERMINAL=serial
-GRUB_SERIAL_COMMAND="serial --speed=115200 --unit=0 --word=8 --parity=no --stop=1"
-
-# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
-#GRUB_DISABLE_LINUX_UUID=true
-
-# Uncomment to disable generation of recovery mode menu entries
-#GRUB_DISABLE_RECOVERY="true"
-
-# Uncomment to get a beep at grub start
-#GRUB_INIT_TUNE="480 440 1"
-_EOF
-
-update-grub
diff --git a/resources/tools/disk-image-builder/ubuntu/scripts-remote/vagrant-guestadditions.sh b/resources/tools/disk-image-builder/ubuntu/scripts-remote/vagrant-guestadditions.sh
deleted file mode 100644
index ec1c064437..0000000000
--- a/resources/tools/disk-image-builder/ubuntu/scripts-remote/vagrant-guestadditions.sh
+++ /dev/null
@@ -1,22 +0,0 @@
-#!/bin/sh -e
-
-# Copyright (c) 2016 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-echo "********** Installing VirtualBox Guest Additions (sigh) **********"
-mkdir /mnt/VBoxGuestAdditions
-mount VBoxGuestAdditions.iso /mnt/VBoxGuestAdditions/
-/mnt/VBoxGuestAdditions/VBoxLinuxAdditions.run
-umount /mnt/VBoxGuestAdditions
-rmdir /mnt/VBoxGuestAdditions/
-rm -f VBoxGuestAdditions.iso
diff --git a/resources/tools/disk-image-builder/ubuntu/scripts-remote/vagrant-user.sh b/resources/tools/disk-image-builder/ubuntu/scripts-remote/vagrant-user.sh
deleted file mode 100644
index 31ef17f147..0000000000
--- a/resources/tools/disk-image-builder/ubuntu/scripts-remote/vagrant-user.sh
+++ /dev/null
@@ -1,40 +0,0 @@
-#!/bin/sh -e
-
-# Copyright (c) 2016 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-echo "********** Adding Vagrant user ***********"
-# Remove cloud-init as this will slow down the Vagrant boot
-export DEBIAN_FRONTEND=noninteractive
-apt-get purge -y cloud-init
-
-# Add Vagrant user
-useradd -c "Vagrant User" -m -s /bin/bash vagrant
-
-mkdir /home/vagrant/.ssh
-cat - > /home/vagrant/.ssh/authorized_keys <<_EOF
-ssh-rsa AAAAB3NzaC1yc2EAAAABIwAAAQEA6NF8iallvQVp22WDkTkyrtvp9eWW6A8YVr+kz4TjGYe7gHzIw+niNltGEFHzD8+v1I2YJ6oXevct1YeS0o9HZyN1Q9qgCgzUFtdOKLv6IedplqoPkcmF0aYet2PkEDo3MlTBckFXPITAMzF8dJSIFo9D8HfdOV0IAdx4O7PtixWKn5y2hMNG0zQPyUecp4pzC6kivAIhyfHilFR61RGL+GPXQ2MWZWFYbAGjyiYJnAmCP3NOTd0jMZEnDkbUvxhMmBYSdETk1rRgm+R4LOzFUGaHqHDLKLX+FIPKcF96hrucXzcWyLbIbEgE98OHlnVYCzRdK8jlqm8tehUc9c9WhQ== vagrant insecure public key
-_EOF
-
-chown -R vagrant.vagrant /home/vagrant/.ssh
-chmod 700 /home/vagrant/.ssh
-
-mkdir -p /etc/sudoers.d
-cat - > /etc/sudoers.d/vagrant <<_EOF
-vagrant ALL=(root) NOPASSWD:ALL
-_EOF
-chmod 440 /etc/sudoers.d/vagrant
-
-echo "********** Rebooting with new kernel **********"
-reboot
-sleep 60