aboutsummaryrefslogtreecommitdiffstats
path: root/resources/tools/testbed-setup
diff options
context:
space:
mode:
authorTibor Frank <tifrank@cisco.com>2017-06-20 13:57:08 +0200
committerTibor Frank <tifrank@cisco.com>2017-06-29 12:17:28 +0000
commit6721e7f09aa95bff6622068332a3f56afad9c87b (patch)
tree37ef7f40e53f740a62830ab46142aa87342dc56b /resources/tools/testbed-setup
parent859157b5db45927c7b4bb0b2d575e68805777a86 (diff)
CSIT-687: Directory structure reorganization
Change-Id: I772c9e214be2461adf58124998d272e7d795220f Signed-off-by: Tibor Frank <tifrank@cisco.com> Signed-off-by: Maciek Konstantynowicz <mkonstan@cisco.com>
Diffstat (limited to 'resources/tools/testbed-setup')
-rw-r--r--resources/tools/testbed-setup/playbooks/files/90-csit158
1 files changed, 79 insertions, 79 deletions
diff --git a/resources/tools/testbed-setup/playbooks/files/90-csit b/resources/tools/testbed-setup/playbooks/files/90-csit
index b53106e6b3..2304162ce8 100644
--- a/resources/tools/testbed-setup/playbooks/files/90-csit
+++ b/resources/tools/testbed-setup/playbooks/files/90-csit
@@ -1,79 +1,79 @@
-# change the minimum size of the hugepage pool.
-vm.nr_hugepages=4096
-
-# this file contains the maximum number of memory map areas a process
-# may have. memory map areas are used as a side-effect of calling
-# malloc, directly by mmap and mprotect, and also when loading shared
-# libraries.
-#
-# while most applications need less than a thousand maps, certain
-# programs, particularly malloc debuggers, may consume lots of them,
-# e.g., up to one or two maps per allocation.
-# must be greater than or equal to (2 * vm.nr_hugepages).
-vm.max_map_count=200000
-
-# hugetlb_shm_group contains group id that is allowed to create sysv
-# shared memory segment using hugetlb page.
-vm.hugetlb_shm_group=0
-
-# this control is used to define how aggressive the kernel will swap
-# memory pages. higher values will increase agressiveness, lower values
-# decrease the amount of swap. a value of 0 instructs the kernel not to
-# initiate swap until the amount of free and file-backed pages is less
-# than the high water mark in a zone.
-vm.swappiness=0
-
-# this parameter can be used to control the nmi watchdog
-# (i.e. the hard lockup detector) on x86 systems.
-#
-# 0 - disable the hard lockup detector
-# 1 - enable the hard lockup detector
-#
-# the hard lockup detector monitors each cpu for its ability to respond to
-# timer interrupts. the mechanism utilizes cpu performance counter registers
-# that are programmed to generate non-maskable interrupts (nmis) periodically
-# while a cpu is busy. hence, the alternative name 'nmi watchdog'.
-#
-# the nmi watchdog is disabled by default if the kernel is running as a guest
-# in a kvm virtual machine. this default can be overridden by adding
-#kernel. nmi_watchdog=1
-
-# shared memory max must be greator or equal to the total size of hugepages.
-# for 2mb pages, totalhugepagesize = vm.nr_hugepages * 2 * 1024 * 1024
-# if the existing kernel.shmmax setting (cat /sys/proc/kernel/shmmax)
-# is greater than the calculated totalhugepagesize then set this parameter
-# to current shmmax value.
-kernel.shmmax=8589934592
-
-# this option can be used to select the type of process address
-# space randomization that is used in the system, for architectures
-# that support this feature.
-# 0 - turn the process address space randomization off. this is the
-# default for architectures that do not support this feature anyways,
-# and kernels that are booted with the "norandmaps" parameter.
-kernel.randomize_va_space=0
-
-# this parameter can be used to control the soft lockup detector.
-#
-# 0 - disable the soft lockup detector
-# 1 - enable the soft lockup detector
-#
-# the soft lockup detector monitors cpus for threads that are hogging the cpus
-# without rescheduling voluntarily, and thus prevent the 'watchdog/n' threads
-# from running. the mechanism depends on the cpus ability to respond to timer
-# interrupts which are needed for the 'watchdog/n' threads to be woken up by
-# the watchdog timer function, otherwise the nmi watchdog - if enabled - can
-# detect a hard lockup condition.
-#kernel.soft_watchdog=0
-
-# this value can be used to control on which cpus the watchdog may run.
-# the default cpumask is all possible cores, but if no_hz_full is
-# enabled in the kernel config, and cores are specified with the
-# nohz_full= boot argument, those cores are excluded by default.
-# offline cores can be included in this mask, and if the core is later
-# brought online, the watchdog will be started based on the mask value.
-#
-# typically this value would only be touched in the nohz_full case
-# to re-enable cores that by default were not running the watchdog,
-# if a kernel lockup was suspected on those cores.
-kernel.watchdog_cpumask=0,18
+# change the minimum size of the hugepage pool.
+vm.nr_hugepages=4096
+
+# this file contains the maximum number of memory map areas a process
+# may have. memory map areas are used as a side-effect of calling
+# malloc, directly by mmap and mprotect, and also when loading shared
+# libraries.
+#
+# while most applications need less than a thousand maps, certain
+# programs, particularly malloc debuggers, may consume lots of them,
+# e.g., up to one or two maps per allocation.
+# must be greater than or equal to (2 * vm.nr_hugepages).
+vm.max_map_count=200000
+
+# hugetlb_shm_group contains group id that is allowed to create sysv
+# shared memory segment using hugetlb page.
+vm.hugetlb_shm_group=0
+
+# this control is used to define how aggressive the kernel will swap
+# memory pages. higher values will increase agressiveness, lower values
+# decrease the amount of swap. a value of 0 instructs the kernel not to
+# initiate swap until the amount of free and file-backed pages is less
+# than the high water mark in a zone.
+vm.swappiness=0
+
+# this parameter can be used to control the nmi watchdog
+# (i.e. the hard lockup detector) on x86 systems.
+#
+# 0 - disable the hard lockup detector
+# 1 - enable the hard lockup detector
+#
+# the hard lockup detector monitors each cpu for its ability to respond to
+# timer interrupts. the mechanism utilizes cpu performance counter registers
+# that are programmed to generate non-maskable interrupts (nmis) periodically
+# while a cpu is busy. hence, the alternative name 'nmi watchdog'.
+#
+# the nmi watchdog is disabled by default if the kernel is running as a guest
+# in a kvm virtual machine. this default can be overridden by adding
+#kernel. nmi_watchdog=1
+
+# shared memory max must be greator or equal to the total size of hugepages.
+# for 2mb pages, totalhugepagesize = vm.nr_hugepages * 2 * 1024 * 1024
+# if the existing kernel.shmmax setting (cat /sys/proc/kernel/shmmax)
+# is greater than the calculated totalhugepagesize then set this parameter
+# to current shmmax value.
+kernel.shmmax=8589934592
+
+# this option can be used to select the type of process address
+# space randomization that is used in the system, for architectures
+# that support this feature.
+# 0 - turn the process address space randomization off. this is the
+# default for architectures that do not support this feature anyways,
+# and kernels that are booted with the "norandmaps" parameter.
+kernel.randomize_va_space=0
+
+# this parameter can be used to control the soft lockup detector.
+#
+# 0 - disable the soft lockup detector
+# 1 - enable the soft lockup detector
+#
+# the soft lockup detector monitors cpus for threads that are hogging the cpus
+# without rescheduling voluntarily, and thus prevent the 'watchdog/n' threads
+# from running. the mechanism depends on the cpus ability to respond to timer
+# interrupts which are needed for the 'watchdog/n' threads to be woken up by
+# the watchdog timer function, otherwise the nmi watchdog - if enabled - can
+# detect a hard lockup condition.
+#kernel.soft_watchdog=0
+
+# this value can be used to control on which cpus the watchdog may run.
+# the default cpumask is all possible cores, but if no_hz_full is
+# enabled in the kernel config, and cores are specified with the
+# nohz_full= boot argument, those cores are excluded by default.
+# offline cores can be included in this mask, and if the core is later
+# brought online, the watchdog will be started based on the mask value.
+#
+# typically this value would only be touched in the nohz_full case
+# to re-enable cores that by default were not running the watchdog,
+# if a kernel lockup was suspected on those cores.
+kernel.watchdog_cpumask=0,18