Remove: VIRL

Signed-off-by: Peter Mikus <pmikus@cisco.com>
Change-Id: I2b1672412e19f15cb46246fffa931351cd3d518b

6 files changed, 0 insertions, 1728 deletions

diff --git a/resources/tools/virl/bin/kill-idle-testcases b/resources/tools/virl/bin/kill-idle-testcases
deleted file mode 100755
index 39a7961ba2..0000000000
--- a/resources/tools/virl/bin/kill-idle-testcases
+++ /dev/null
@@ -1,29 +0,0 @@
-#!/bin/bash
-
-# Copyright (c) 2016 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-IDLE_THRESHOLD=3600 # 1 hour
-
-CURR_TIME=$(date +%s)
-for s in /nfs/scratch/*
-do
-  s_time=$(cat $s/start_time)
-  age=$[$CURR_TIME - $s_time]
-  s2=$(basename $s)
-  if [ $age -gt $IDLE_THRESHOLD ]
-  then
-    echo "Simulation $s is older than $IDLE_THRESHOLD seconds (age $age), killing it..."
-    stop-testcase $s2
-  fi
-done
diff --git a/resources/tools/virl/bin/list-testcases b/resources/tools/virl/bin/list-testcases
deleted file mode 100755
index 73c05303fe..0000000000
--- a/resources/tools/virl/bin/list-testcases
+++ /dev/null
@@ -1,19 +0,0 @@
-#!/bin/bash
-
-# Copyright (c) 2017 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-VIRL_USER="tb4-virl"                                            # VIRL credentials (what one would enter in VMMaestro)
-VIRL_PASSWORD="Cisco1234"
-
-virl_std_client --json --quiet -u $VIRL_USER -p $VIRL_PASSWORD simengine-list
diff --git a/resources/tools/virl/bin/start-testcase b/resources/tools/virl/bin/start-testcase
deleted file mode 100755
index 9e63f8da92..0000000000
--- a/resources/tools/virl/bin/start-testcase
+++ /dev/null
@@ -1,569 +0,0 @@
-#!/usr/bin/python
-
-# Copyright (c) 2016 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-"""This script is handling starting of VIRL simulations."""
-
-__author__ = 'ckoester@cisco.com'
-
-import argparse
-import netifaces
-import os
-import paramiko
-import random
-import re
-import shutil
-import sys
-import tempfile
-import time
-
-import requests
-
-IPS_PER_SIMULATION = 5
-
-
-def indent(lines, amount, fillchar=' '):
-    """Indent the string by amount of fill chars.
-
-    :param lines: String to indent.
-    :param amount: Number of fill chars.
-    :param fillchar: Filling character.
-    :type lines: str
-    :type amount: int
-    :type fillchar: str
-    :returns: Indented string.
-    :rtype: str
-    """
-    padding = amount * fillchar
-    return padding + ('\n'+padding).join(lines.split('\n'))
-
-
-def print_to_stderr(msg, end='\n'):
-    """Writes any text to stderr.
-
-    :param msg: Message to print.
-    :param end: By default print new line at the end.
-    :type msg: str
-    :type end: str
-    """
-    try:
-        sys.stderr.write(str(msg) + end)
-    except ValueError:
-        pass
-
-
-def get_assigned_interfaces(args, network="flat"):
-    """Retrieve assigned interfaces in openstack network.
-
-    :param args: Command line params.
-    :param network: Openstack network.
-    :type args: ArgumentParser
-    :type network: str
-    :returns: Assigned interfaces.
-    :rtype: list
-    :raises RuntimeError: If response is not 200.
-    """
-    req = requests.get('http://{}/openstack/rest/ports/{}'
-                       .format(args.virl_ip, network),
-                       auth=(args.username, args.password))
-    if req.status_code == 200:
-        return req.json()
-    else:
-        raise RuntimeError("ERROR: Retrieving ports in use - "
-                           "Status other than 200 HTTP OK:\n{}"
-                           .format(req.content))
-
-
-def get_assigned_interfaces_count(args, network="flat"):
-    """Count assigned interfaces in openstack network.
-
-    :param args: Command line params.
-    :param network: Openstack network.
-    :type args: ArgumentParser
-    :type network: str
-    :returns: Assigned interfaces count.
-    :rtype: int
-    """
-    return len(get_assigned_interfaces(args, network=network))
-
-
-def check_ip_addresses(args):
-    """Check IP address availability.
-
-    :param args: Command line params.
-    :type args: ArgumentParser
-    :raises RuntimeError: If not enough free addresses available.
-    """
-    for i in range(args.wait_count):
-        if (args.quota -
-                get_assigned_interfaces_count(args) >= IPS_PER_SIMULATION):
-            break
-        if args.verbosity >= 2:
-            print_to_stderr("DEBUG: - Attempt {} out of {}, waiting for free "
-                            "IP addresses".format(i, args.wait_count))
-        # Wait random amount of time within range 1-3 minutes
-        time.sleep(random.randint(60,180))
-    else:
-        raise RuntimeError("ERROR: Not enough IP addresses to run simulation")
-
-
-def check_virl_resources(args):
-    """Check virl resources availability.
-
-    :param args: Command line params.
-    :type args: ArgumentParser
-    """
-    check_ip_addresses(args)
-
-#
-# FIXME: Right now, this is really coded like a shell script, as one big
-# function executed in sequence. This should be broken down into multiple
-# functions.
-#
-
-
-def main():
-    """ Main function."""
-    #
-    # Get our default interface IP address. This will become the default
-    # value for the "NFS Server IP" option.
-    #
-    gws = netifaces.gateways()
-    addrs = netifaces.ifaddresses(gws['default'][netifaces.AF_INET][1])
-    default_addr = addrs[netifaces.AF_INET][0]['addr']
-
-    #
-    # Verify CLI parameters and try to download our VPP image into a temporary
-    # file first
-    #
-    parser = argparse.ArgumentParser()
-    parser.add_argument("topology", help="the base topology to be started")
-    parser.add_argument("packages", help="Path to the VPP .deb(s) or .rpm(s) " +
-                        "that is/are to be installed", nargs='+')
-    parser.add_argument("-c", "--copy", help="Copy the VPP packages, " +
-                        "leaving the originals in place. Default is to " +
-                        "move them.", action='store_true')
-    parser.add_argument("-k", "--keep", help="Keep (do not delete) the " +
-                        "simulation in case of error", action='store_true')
-    parser.add_argument("-v", "--verbosity", action="count", default=0)
-    parser.add_argument("-nip", "--nfs-server-ip", help="NFS server (our) IP " +
-                        "default is derived from routing table: " +
-                        "{}".format(default_addr), default=default_addr)
-    parser.add_argument("-ns", "--nfs-scratch-directory",
-                        help="Server location for NFS scratch directory",
-                        default="/nfs/scratch")
-    parser.add_argument("-nc", "--nfs-common-directory",
-                        help="Server location for NFS common (read-only) " +
-                        "directory", default="/nfs/common")
-    parser.add_argument("-wc", "--wait-count",
-                        help="number of intervals to wait for simulation to " +
-                        "be ready", type=int, default=48)
-    parser.add_argument("-wt", "--wait-time",
-                        help="length of a single interval to wait for " +
-                        "simulation to be ready", type=int, default=5)
-    parser.add_argument("-vip", "--virl-ip",
-                        help="VIRL IP and Port (e.g. 127.0.0.1:19399)",
-                        default="127.0.0.1:19399")
-    parser.add_argument("-u", "--username", help="VIRL username",
-                        default="tb4-virl")
-    parser.add_argument("-au", "--admin-username", help="VIRL admin username",
-                        default="uwmadmin")
-    parser.add_argument("-p", "--password", help="VIRL password",
-                        default="Cisco1234")
-    parser.add_argument("-su", "--ssh-user", help="SSH username",
-                        default="cisco")
-    parser.add_argument("-e", "--expiry", help="Simulation expiry",
-                        default="120")
-    parser.add_argument("-spr", "--ssh-privkey", help="SSH private keyfile",
-                        default="/home/jenkins-in/.ssh/id_rsa_virl")
-    parser.add_argument("-spu", "--ssh-pubkey", help="SSH public keyfile",
-                        default="/home/jenkins-in/.ssh/id_rsa_virl.pub")
-    parser.add_argument("-r", "--release", help="VM disk image/release " +
-                        "(ex. \"csit-ubuntu-16.04.1_2016-12-19_1.6\")",
-                        default="csit-ubuntu-16.04.1_2016-12-19_1.6")
-    parser.add_argument("--topology-directory", help="Topology directory",
-                        default="/home/jenkins-in/testcase-infra/topologies")
-    parser.add_argument("-q", "--quota",
-                        help="VIRL quota for max number of allowed IPs",
-                        type=int, default=74)
-    parser.add_argument("-si", "--skip-install", help="Skip VPP installation",
-                        action='store_true')
-
-    args = parser.parse_args()
-
-    #
-    # Check if topology and template exist
-    #
-    if args.verbosity >= 2:
-        print_to_stderr("DEBUG: Running with topology {}"
-                        .format(args.topology))
-
-    topology_virl_filename = os.path.join(args.topology_directory,
-                                          args.topology + ".virl")
-    topology_yaml_filename = os.path.join(args.topology_directory,
-                                          args.topology + ".yaml")
-
-    if not os.path.isfile(topology_virl_filename):
-        print_to_stderr("ERROR: Topology VIRL file {} does not exist"
-                        .format(topology_virl_filename))
-        sys.exit(1)
-    if not os.path.isfile(topology_yaml_filename):
-        print_to_stderr("ERROR: Topology YAML file {} does not exist"
-                        .format(topology_yaml_filename))
-        sys.exit(1)
-
-    #
-    # Check if VPP package exists
-    #
-    if not args.skip_install:
-        for package in args.packages:
-            if args.verbosity >= 2:
-                print_to_stderr("DEBUG: Checking if file {} exists"
-                                .format(package))
-            if not os.path.isfile(package):
-                print_to_stderr("ERROR: Required package {} does not exist"
-                                .format(package))
-                sys.exit(1)
-
-    #
-    # Start VIRL topology
-    #
-    if args.verbosity >= 1:
-        print_to_stderr("DEBUG: Starting VIRL topology")
-    temp_handle, temp_topology = tempfile.mkstemp()
-    with open(args.ssh_pubkey, 'r') as pubkey_file:
-        pub_key = pubkey_file.read().replace('\n', '')
-    with open(temp_topology, 'w') as new_file, \
-        open(topology_virl_filename, 'r') as old_file:
-        for line in old_file:
-            line = line.replace("  - VIRL-USER-SSH-PUBLIC-KEY", "  - "+pub_key)
-            line = line.replace("$$NFS_SERVER_SCRATCH$$",
-                                args.nfs_server_ip+":"+args.nfs_scratch_directory)
-            line = line.replace("$$NFS_SERVER_COMMON$$",
-                                args.nfs_server_ip+":"+args.nfs_common_directory)
-            line = line.replace("$$VM_IMAGE$$", "server-"+args.release)
-            new_file.write(line)
-    os.close(temp_handle)
-
-    try:
-        data = open(temp_topology, 'rb')
-        check_virl_resources(args)
-        req = requests.post('http://' + args.virl_ip + '/simengine/rest/launch',
-                            auth=(args.username, args.password),
-                            data=data)
-        if args.verbosity >= 2:
-            print_to_stderr("DEBUG: - Request URL {}"
-                            .format(req.url))
-            print_to_stderr("{}"
-                            .format(req.text))
-            print_to_stderr("DEBUG: - Response Code {}"
-                            .format(req.status_code))
-        new_file.close()
-        if req.status_code != 200:
-            raise RuntimeError("ERROR: Launching VIRL simulation - "
-                               "Status other than 200 HTTP OK:\n{}"
-                               .format(req.content))
-    except (requests.exceptions.RequestException,
-            RuntimeError) as ex_error:
-        print_to_stderr(ex_error)
-        os.remove(temp_topology)
-        sys.exit(1)
-
-    # If we got here, we had a good response. The response content is the
-    # session ID.
-    session_id = req.content
-    if args.verbosity >= 1:
-        print_to_stderr("DEBUG: VIRL simulation session-id: {}"
-                        .format(session_id))
-
-    # Set session expiry to autokill sessions if not done from jenkins
-    if not args.keep:
-        if args.verbosity >= 1:
-            print_to_stderr("DEBUG: Setting expire for session-id: {}"
-                            .format(session_id))
-        try:
-            req = requests.put('http://' + args.virl_ip +
-                               '/simengine/rest/admin-update/' + session_id +
-                               '/expiry',
-                               auth=(args.admin_username, args.password),
-                               params={'user': args.username,
-                                       'expires': args.expiry})
-            if args.verbosity >= 2:
-                print_to_stderr("DEBUG: - Request URL {}"
-                                .format(req.url))
-                print_to_stderr("{}"
-                                .format(req.text))
-                print_to_stderr("DEBUG: - Response Code {}"
-                                .format(req.status_code))
-            if req.status_code != 200:
-                raise RuntimeError("ERROR: Setting expiry to simulation - "
-                                   "Status other than 200 HTTP OK:\n{}"
-                                   .format(req.content))
-        except (requests.exceptions.RequestException,
-                RuntimeError) as ex_error:
-            print_to_stderr(ex_error)
-            req = requests.get('http://' + args.virl_ip +
-                               '/simengine/rest/stop/' + session_id,
-                               auth=(args.username, args.password))
-            os.remove(temp_topology)
-            print "{}".format(session_id)
-            sys.exit(1)
-
-    #
-    # Create simulation scratch directory. Move topology file into that
-    # directory. Copy or move debian packages into that directory.
-    #
-    scratch_directory = os.path.join(args.nfs_scratch_directory, session_id)
-    os.mkdir(scratch_directory)
-    shutil.move(temp_topology, os.path.join(scratch_directory,
-                                            "virl_topology.virl"))
-    os.mkdir(os.path.join(scratch_directory, "vpp"))
-    for package in args.packages:
-        if args.copy:
-            shutil.copy(package, os.path.join(scratch_directory, "vpp",
-                                              os.path.basename(package)))
-        else:
-            shutil.move(package, os.path.join(scratch_directory, "vpp",
-                                              os.path.basename(package)))
-
-    #
-    # Wait for simulation to become active
-    #
-    if args.verbosity >= 1:
-        print_to_stderr("DEBUG: Waiting for simulation to become active")
-
-    sim_is_started = False
-    nodelist = []
-
-    count = args.wait_count
-    while (count > 0) and not sim_is_started:
-        time.sleep(args.wait_time)
-        count -= 1
-
-        req = requests.get('http://' + args.virl_ip + '/simengine/rest/nodes/' +
-                           session_id, auth=(args.username, args.password))
-        data = req.json()
-
-        active = 0
-        total = 0
-
-        # Flush the node list every time, keep the last one
-        nodelist = []
-
-        # Hosts are the keys of the inner dictionary
-        for key in data[session_id].keys():
-            if data[session_id][key]['management-proxy'] == "self":
-                continue
-            nodelist.append(key)
-            total += 1
-            if data[session_id][key]['state'] == "ACTIVE":
-                active += 1
-        if args.verbosity >= 2:
-            print_to_stderr("DEBUG: - Attempt {} out of {}, total {} hosts, "
-                            "{} active".format(args.wait_count-count,
-                                               args.wait_count, total, active))
-        if active == total:
-            sim_is_started = True
-
-    if not sim_is_started:
-        print_to_stderr("ERROR: Simulation nodes never changed to ACTIVE state")
-        print_to_stderr("Last VIRL response:")
-        print_to_stderr(data)
-        if not args.keep:
-            req = requests.get('http://' + args.virl_ip +
-                               '/simengine/rest/stop/' + session_id,
-                               auth=(args.username, args.password))
-            try:
-                shutil.rmtree(scratch_directory)
-            except:
-                print_to_stderr("ERROR: Removing scratch directory")
-            print "{}".format(session_id)
-        sys.exit(1)
-
-    if args.verbosity >= 2:
-        print_to_stderr("DEBUG: Nodes: {}"
-                        .format(", ".join(nodelist)))
-
-    #
-    # Fetch simulation's IPs and create files
-    # (ansible hosts file, topology YAML file)
-    #
-    try:
-        req = requests.get('http://' + args.virl_ip +
-                           '/simengine/rest/interfaces/' + session_id,
-                           auth=(args.username, args.password),
-                           params={'fetch-state': '1'})
-        if args.verbosity >= 2:
-            print_to_stderr("DEBUG: - Request URL {}"
-                            .format(req.url))
-            print_to_stderr("DEBUG: - Request Text")
-            print_to_stderr("{}".format(req.text))
-            print_to_stderr("DEBUG: - Response Code {}"
-                            .format(req.status_code))
-        if req.status_code != 200:
-            raise RuntimeError("ERROR:Fetching IP's of simulation - "
-                               "Status other than 200 HTTP OK:\n{}"
-                               .format(req.content))
-    except (requests.exceptions.RequestException,
-            RuntimeError) as ex_error:
-        print_to_stderr(ex_error)
-        if not args.keep:
-            req = requests.get('http://' + args.virl_ip +
-                               '/simengine/rest/stop/' + session_id,
-                               auth=(args.username, args.password))
-            try:
-                shutil.rmtree(scratch_directory)
-            except:
-                print_to_stderr("ERROR: Removing scratch directory")
-            print "{}".format(session_id)
-        sys.exit(1)
-    data = req.json()
-
-    # Populate node addresses
-    nodeaddrs = {}
-    topology = {}
-    for key in nodelist:
-        nodetype = re.split('[0-9]', key)[0]
-        if not nodetype in nodeaddrs:
-            nodeaddrs[nodetype] = {}
-        nodeaddrs[nodetype][key] = re.split('\\/', \
-            data[session_id][key]['management']['ip-address'])[0]
-        if args.verbosity >= 2:
-            print_to_stderr("DEBUG: Node {} is of type {} and has mgmt IP {}"
-                            .format(key, nodetype, nodeaddrs[nodetype][key]))
-
-        topology[key] = {}
-        for key2 in data[session_id][key]:
-            topology[key]["nic-"+key2] = data[session_id][key][key2]
-            if 'ip-address' in topology[key]["nic-"+key2]:
-                if topology[key]["nic-"+key2]['ip-address'] is not None:
-                    topology[key]["nic-"+key2]['ip-addr'] = re.split('\\/', \
-                        topology[key]["nic-"+key2]['ip-address'])[0]
-
-    # Write ansible file
-    ansiblehosts = open(os.path.join(scratch_directory, 'ansible-hosts'), 'w')
-    for key1 in nodeaddrs:
-        ansiblehosts.write("[{}]\n".format(key1))
-        for key2 in nodeaddrs[key1]:
-            ansiblehosts.write("{} hostname={}\n".format(nodeaddrs[key1][key2],
-                                                         key2))
-    ansiblehosts.close()
-
-    # Process topology YAML template
-    with open(args.ssh_privkey, 'r') as privkey_file:
-        priv_key = indent(privkey_file.read(), 6)
-
-    with open(os.path.join(scratch_directory, "topology.yaml"), 'w') as \
-        new_file, open(topology_yaml_filename, 'r') as old_file:
-        for line in old_file:
-            new_file.write(line.format(priv_key=priv_key, topology=topology))
-
-    #
-    # Wait for hosts to become reachable over SSH
-    #
-    if args.verbosity >= 1:
-        print_to_stderr("DEBUG: Waiting for hosts to become reachable over SSH")
-
-    missing = -1
-    count = args.wait_count
-    while (count > 0) and missing != 0:
-        time.sleep(args.wait_time)
-        count -= 1
-
-        missing = 0
-        for key in nodelist:
-            if not os.path.exists(os.path.join(scratch_directory, key)):
-                missing += 1
-        if args.verbosity >= 2:
-            print_to_stderr("DEBUG: Attempt {} out of {}, waiting for {} hosts"
-                            .format(args.wait_count-count, args.wait_count,
-                                    missing))
-
-    if missing != 0:
-        print_to_stderr("ERROR: Simulation started OK but {} hosts never "
-                        "mounted their NFS directory".format(missing))
-        if not args.keep:
-            req = requests.get('http://' + args.virl_ip +
-                               '/simengine/rest/stop/' + session_id,
-                               auth=(args.username, args.password))
-            try:
-                shutil.rmtree(scratch_directory)
-            except:
-                print_to_stderr("ERROR: Removing scratch directory")
-            print "{}".format(session_id)
-        sys.exit(1)
-
-    #
-    # Upgrade VPP
-    #
-    if not args.skip_install:
-        if args.verbosity >= 1:
-            print_to_stderr("DEBUG: Uprading VPP")
-
-        for key1 in nodeaddrs:
-            if not key1 == 'tg':
-                for key2 in nodeaddrs[key1]:
-                    ipaddr = nodeaddrs[key1][key2]
-                    if args.verbosity >= 2:
-                        print_to_stderr("DEBUG: Upgrading VPP on node {}"
-                                        .format(ipaddr))
-                    paramiko.util.log_to_file(os.path.join(scratch_directory,
-                                                           "ssh.log"))
-                    client = paramiko.SSHClient()
-                    client.load_system_host_keys()
-                    client.load_host_keys("/dev/null")
-                    client.set_missing_host_key_policy(paramiko.AutoAddPolicy())
-                    client.connect(ipaddr, username=args.ssh_user,
-                                   key_filename=args.ssh_privkey)
-                    if 'centos' in args.topology:
-                        if args.verbosity >= 1:
-                            print_to_stderr("DEBUG: Installing RPM packages")
-                        vpp_install_command = 'sudo rpm -ivh /scratch/vpp/*.rpm'
-                    elif 'trusty' in args.topology or 'xenial' in args.topology:
-                        if args.verbosity >= 1:
-                            print_to_stderr("DEBUG: Installing DEB packages")
-                        vpp_install_command = 'sudo dpkg -i --force-all ' \
-                                              '/scratch/vpp/*.deb'
-                    else:
-                        print_to_stderr("ERROR: Unsupported OS requested: {}"
-                                         .format(args.topology))
-                        vpp_install_command = ''
-                    _, stdout, stderr = \
-                        client.exec_command(vpp_install_command)
-                    c_stdout = stdout.read()
-                    c_stderr = stderr.read()
-                    if args.verbosity >= 2:
-                        print_to_stderr("DEBUG: Command output was:")
-                        print_to_stderr(c_stdout)
-                        print_to_stderr("DEBUG: Command stderr was:")
-                        print_to_stderr(c_stderr)
-
-    #
-    # Write a file with timestamp to scratch directory. We can use this to track
-    # how long a simulation has been running.
-    #
-    with open(os.path.join(scratch_directory, 'start_time'), 'a') as \
-        timestampfile:
-        timestampfile.write('{}\n'.format(int(time.time())))
-
-    #
-    # Declare victory
-    #
-    if args.verbosity >= 1:
-        print_to_stderr("SESSION ID: {}".format(session_id))
-
-    print "{}".format(session_id)
-
-if __name__ == "__main__":
-    sys.exit(main())
diff --git a/resources/tools/virl/bin/start-testcase-DMM b/resources/tools/virl/bin/start-testcase-DMM
deleted file mode 100755
index c6a7c2dda2..0000000000
--- a/resources/tools/virl/bin/start-testcase-DMM
+++ /dev/null
@@ -1,542 +0,0 @@
-#!/usr/bin/python
-
-# Copyright (c) 2018 Huawei Technologies Co.,Ltd.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-"""This script is handling starting of VIRL simulations."""
-
-import argparse
-import netifaces
-import os
-import paramiko
-import random
-import re
-import shutil
-import sys
-import tempfile
-import time
-
-import requests
-
-IPS_PER_SIMULATION = 5
-
-def indent(lines, amount, fillchar=' '):
-    """Indent the string by amount of fill chars.
-
-    :param lines: String to indent.
-    :param amount: Number of fill chars.
-    :param fillchar: Filling character.
-    :type lines: str
-    :type amount: int
-    :type fillchar: str
-    :returns: Indented string.
-    :rtype: str
-    """
-    padding = amount * fillchar
-    return padding + ('\n'+padding).join(lines.split('\n'))
-
-def print_to_stderr(msg, end='\n'):
-    """Writes any text to stderr.
-
-    :param msg: Message to print.
-    :param end: By default print new line at the end.
-    :type msg: str
-    :type end: str
-    """
-    try:
-        sys.stderr.write(str(msg) + end)
-    except ValueError:
-        pass
-
-def get_assigned_interfaces(args, network="flat"):
-    """Retrieve assigned interfaces in openstack network.
-
-    :param args: Command line params.
-    :param network: Openstack network.
-    :type args: ArgumentParser
-    :type network: str
-    :returns: Assigned interfaces.
-    :rtype: list
-    :raises RuntimeError: If response is not 200.
-    """
-    req = requests.get('http://{}/openstack/rest/ports/{}'
-                       .format(args.virl_ip, network),
-                       auth=(args.username, args.password))
-    if req.status_code == 200:
-        return req.json()
-    else:
-        raise RuntimeError("ERROR: Retrieving ports in use - "
-                           "Status other than 200 HTTP OK:\n{}"
-                           .format(req.content))
-
-def get_assigned_interfaces_count(args, network="flat"):
-    """Count assigned interfaces in openstack network.
-
-    :param args: Command line params.
-    :param network: Openstack network.
-    :type args: ArgumentParser
-    :type network: str
-    :returns: Assigned interfaces count.
-    :rtype: int
-    """
-    return len(get_assigned_interfaces(args, network=network))
-
-def check_ip_addresses(args):
-    """Check IP address availability.
-
-    :param args: Command line params.
-    :type args: ArgumentParser
-    :raises RuntimeError: If not enough free addresses available.
-    """
-    for i in range(args.wait_count):
-        if args.quota - \
-            get_assigned_interfaces_count(args) >= IPS_PER_SIMULATION:
-            break
-        if args.verbosity >= 2:
-            print_to_stderr("DEBUG: - Attempt {} out of {}, waiting for free "
-                            "IP addresses".format(i, args.wait_count))
-        # Wait random amount of time within range 1-3 minutes
-        time.sleep(random.randint(60, 180))
-    else:
-        raise RuntimeError("ERROR: Not enough IP addresses to run simulation")
-
-def check_virl_resources(args):
-    """Check virl resources availability.
-
-    :param args: Command line params.
-    :type args: ArgumentParser
-    """
-    check_ip_addresses(args)
-
-#
-# FIXME: Right now, this is really coded like a shell script, as one big
-# function executed in sequence. This should be broken down into multiple
-# functions.
-#
-def main():
-    """ Main function."""
-    #
-    # Get our default interface IP address. This will become the default
-    # value for the "NFS Server IP" option.
-    #
-    gws = netifaces.gateways()
-    addrs = netifaces.ifaddresses(gws['default'][netifaces.AF_INET][1])
-    default_addr = addrs[netifaces.AF_INET][0]['addr']
-
-    #
-    # Verify CLI parameters and try to download our VPP image into a temporary
-    # file first
-    #
-    parser = argparse.ArgumentParser()
-    parser.add_argument("topology", help="the base topology to be started")
-    parser.add_argument("packages", help="Path to the dmm package file that " +
-                        "is/are to be installed", nargs='+')
-    parser.add_argument("-c", "--copy", help="Copy the dmm packages, " +
-                        "leaving the originals in place. Default is to " +
-                        "move them.", action='store_true')
-    parser.add_argument("-k", "--keep", help="Keep (do not delete) the " +
-                        "simulation in case of error", action='store_true')
-    parser.add_argument("-v", "--verbosity", action="count", default=0)
-    parser.add_argument("-nip", "--nfs-server-ip", help="NFS server (our) IP " +
-                        "default is derived from routing table: " +
-                        "{}".format(default_addr), default=default_addr)
-    parser.add_argument("-ns", "--nfs-scratch-directory",
-                        help="Server location for NFS scratch diretory",
-                        default="/nfs/scratch")
-    parser.add_argument("-nc", "--nfs-common-directory",
-                        help="Server location for NFS common (read-only) " +
-                        "directory", default="/nfs/common")
-    parser.add_argument("-wc", "--wait-count",
-                        help="number of intervals to wait for simulation to " +
-                        "be ready", type=int, default=24)
-    parser.add_argument("-wt", "--wait-time",
-                        help="length of a single interval to wait for " +
-                        "simulation to be ready", type=int, default=5)
-    parser.add_argument("-vip", "--virl-ip",
-                        help="VIRL IP and Port (e.g. 127.0.0.1:19399)",
-                        default="127.0.0.1:19399")
-    parser.add_argument("-u", "--username", help="VIRL username",
-                        default="tb4-virl")
-    parser.add_argument("-au", "--admin-username", help="VIRL admin username",
-                        default="uwmadmin")
-    parser.add_argument("-p", "--password", help="VIRL password",
-                        default="Cisco1234")
-    parser.add_argument("-su", "--ssh-user", help="SSH username",
-                        default="cisco")
-    parser.add_argument("-e", "--expiry", help="Simulation expiry",
-                        default="120")
-    parser.add_argument("-spr", "--ssh-privkey", help="SSH private keyfile",
-                        default="/home/jenkins-in/.ssh/id_rsa_virl")
-    parser.add_argument("-spu", "--ssh-pubkey", help="SSH public keyfile",
-                        default="/home/jenkins-in/.ssh/id_rsa_virl.pub")
-    parser.add_argument("-r", "--release", help="VM disk image/release " +
-                        "(ex. \"csit-ubuntu-16.04.1_2016-12-19_1.6\")",
-                        default="csit-ubuntu-16.04.1_2016-12-19_1.6")
-    parser.add_argument("--topology-directory", help="Topology directory",
-                        default="/home/jenkins-in/testcase-infra/topologies")
-    parser.add_argument("-q", "--quota",
-                        help="VIRL quota for max number of allowed IPs",
-                        type=int, default=74)
-
-    args = parser.parse_args()
-
-    #
-    # Check if topology and template exist
-    #
-    if args.verbosity >= 2:
-        print_to_stderr("DEBUG: Running with topology {}"
-                        .format(args.topology))
-
-    topology_virl_filename = os.path.join(args.topology_directory,
-                                          args.topology + ".virl")
-    topology_yaml_filename = os.path.join(args.topology_directory,
-                                          args.topology + ".yaml")
-
-    if not os.path.isfile(topology_virl_filename):
-        print_to_stderr("ERROR: Topology VIRL file {} does not exist"
-                        .format(topology_virl_filename))
-        sys.exit(1)
-    if not os.path.isfile(topology_yaml_filename):
-        print_to_stderr("ERROR: Topology YAML file {} does not exist"
-                        .format(topology_yaml_filename))
-        sys.exit(1)
-
-    #
-    # Check if DMM package exists
-    #
-    for package in args.packages:
-        if args.verbosity >= 2:
-            print_to_stderr("DEBUG: Checking if file {} exists"
-                            .format(package))
-        if not os.path.isfile(package):
-            print_to_stderr("ERROR: DMM package {} does not exist."
-                            .format(package))
-            sys.exit(1)
-
-    #
-    # Start VIRL topology
-    #
-    if args.verbosity >= 1:
-        print_to_stderr("DEBUG: Starting VIRL topology")
-    temp_handle, temp_topology = tempfile.mkstemp()
-    with open(args.ssh_pubkey, 'r') as pubkey_file:
-        pub_key = pubkey_file.read().replace('\n', '')
-    with open(temp_topology, 'w') as new_file, \
-        open(topology_virl_filename, 'r') as old_file:
-        for line in old_file:
-            line = line.replace("  - VIRL-USER-SSH-PUBLIC-KEY", "  - "+pub_key)
-            line = line.replace("$$NFS_SERVER_SCRATCH$$", \
-                args.nfs_server_ip+":"+args.nfs_scratch_directory)
-            line = line.replace("$$NFS_SERVER_COMMON$$", \
-                args.nfs_server_ip+":"+args.nfs_common_directory)
-            line = line.replace("$$VM_IMAGE$$", "server-"+args.release)
-            new_file.write(line)
-    os.close(temp_handle)
-
-    try:
-        data = open(temp_topology, 'rb')
-        check_virl_resources(args)
-        req = requests.post('http://' + args.virl_ip + '/simengine/rest/launch',
-                            auth=(args.username, args.password),
-                            data=data)
-        if args.verbosity >= 2:
-            print_to_stderr("DEBUG: - Request URL {}"
-                            .format(req.url))
-            print_to_stderr("{}"
-                            .format(req.text))
-            print_to_stderr("DEBUG: - Response Code {}"
-                            .format(req.status_code))
-        new_file.close()
-        if req.status_code != 200:
-            raise RuntimeError("ERROR: Launching VIRL simulation - "
-                               "Status other than 200 HTTP OK:\n{}"
-                               .format(req.content))
-    except (requests.exceptions.RequestException,
-            RuntimeError) as ex_error:
-        print_to_stderr(ex_error)
-        os.remove(temp_topology)
-        sys.exit(1)
-
-    # If we got here, we had a good response. The response content is the
-    # session ID.
-    session_id = req.content
-    if args.verbosity >= 1:
-        print_to_stderr("DEBUG: VIRL simulation session-id: {}"
-                        .format(session_id))
-
-    # Set session expiry to autokill sessions if not done from jenkins
-    if not args.keep:
-        if args.verbosity >= 1:
-            print_to_stderr("DEBUG: Setting expire for session-id: {}"
-                            .format(session_id))
-        try:
-            req = requests.put('http://' + args.virl_ip +
-                               '/simengine/rest/admin-update/' + session_id +
-                               '/expiry',
-                               auth=(args.admin_username, args.password),
-                               params={'user': args.username,
-                                       'expires': args.expiry})
-            if args.verbosity >= 2:
-                print_to_stderr("DEBUG: - Request URL {}"
-                                .format(req.url))
-                print_to_stderr("{}"
-                                .format(req.text))
-                print_to_stderr("DEBUG: - Response Code {}"
-                                .format(req.status_code))
-            if req.status_code != 200:
-                raise RuntimeError("ERROR: Setting expiry to simulation - "
-                                   "Status other than 200 HTTP OK:\n{}"
-                                   .format(req.content))
-        except (requests.exceptions.RequestException,
-                RuntimeError) as ex_error:
-            print_to_stderr(ex_error)
-            req = requests.get('http://' + args.virl_ip +
-                               '/simengine/rest/stop/' + session_id,
-                               auth=(args.username, args.password))
-            os.remove(temp_topology)
-            print "{}".format(session_id)
-            sys.exit(1)
-
-    #
-    # Create simulation scratch directory. Move topology file into that
-    # directory. Copy or move DMM packages into that directory.
-    #
-    scratch_directory = os.path.join(args.nfs_scratch_directory, session_id)
-    os.mkdir(scratch_directory)
-    shutil.move(temp_topology, os.path.join(scratch_directory,
-                                            "virl_topology.virl"))
-    os.mkdir(os.path.join(scratch_directory, "dmmtest"))
-    for package in args.packages:
-        if args.copy:
-            shutil.copy(package, os.path.join(scratch_directory, "dmmtest",
-                                              os.path.basename(package)))
-        else:
-            shutil.move(package, os.path.join(scratch_directory, "dmmtest",
-                                              os.path.basename(package)))
-
-    #
-    # Wait for simulation to become active
-    #
-    if args.verbosity >= 1:
-        print_to_stderr("DEBUG: Waiting for simulation to become active")
-
-    sim_is_started = False
-    nodelist = []
-
-    count = args.wait_count
-    while (count > 0) and not sim_is_started:
-        time.sleep(args.wait_time)
-        count -= 1
-
-        req = requests.get('http://' + args.virl_ip + '/simengine/rest/nodes/' +
-                           session_id, auth=(args.username, args.password))
-        data = req.json()
-
-        active = 0
-        total = 0
-
-        # Flush the node list every time, keep the last one
-        nodelist = []
-
-        # Hosts are the keys of the inner dictionary
-        for key in data[session_id].keys():
-            if data[session_id][key]['management-proxy'] == "self":
-                continue
-            nodelist.append(key)
-            total += 1
-            if data[session_id][key]['state'] == "ACTIVE":
-                active += 1
-        if args.verbosity >= 2:
-            print_to_stderr("DEBUG: - Attempt {} out of {}, total {} hosts, "
-                            "{} active".format(args.wait_count-count,
-                                               args.wait_count, total, active))
-        if active == total:
-            sim_is_started = True
-
-    if not sim_is_started:
-        print_to_stderr("ERROR: Simulation nodes never changed to ACTIVE state")
-        print_to_stderr("Last VIRL response:")
-        print_to_stderr(data)
-        if not args.keep:
-            req = requests.get('http://' + args.virl_ip +
-                               '/simengine/rest/stop/' + session_id,
-                               auth=(args.username, args.password))
-            try:
-                shutil.rmtree(scratch_directory)
-            except:
-                print_to_stderr("ERROR: Removing scratch directory")
-            print "{}".format(session_id)
-        sys.exit(1)
-
-    if args.verbosity >= 2:
-        print_to_stderr("DEBUG: Nodes: {}"
-                        .format(", ".join(nodelist)))
-
-    #
-    # Fetch simulation's IPs and create files
-    # (ansible hosts file, topology YAML file)
-    #
-    try:
-        req = requests.get('http://' + args.virl_ip +
-                           '/simengine/rest/interfaces/' + session_id,
-                           auth=(args.username, args.password),
-                           params={'fetch-state': '1'})
-        if args.verbosity >= 2:
-            print_to_stderr("DEBUG: - Request URL {}"
-                            .format(req.url))
-            print_to_stderr("DEBUG: - Request Text")
-            print_to_stderr("{}".format(req.text))
-            print_to_stderr("DEBUG: - Response Code {}"
-                            .format(req.status_code))
-        if req.status_code != 200:
-            raise RuntimeError("ERROR:Fetching IP's of simulation - "
-                               "Status other than 200 HTTP OK:\n{}"
-                               .format(req.content))
-    except (requests.exceptions.RequestException,
-            RuntimeError) as ex_error:
-        print_to_stderr(ex_error)
-        if not args.keep:
-            req = requests.get('http://' + args.virl_ip +
-                               '/simengine/rest/stop/' + session_id,
-                               auth=(args.username, args.password))
-            try:
-                shutil.rmtree(scratch_directory)
-            except:
-                print_to_stderr("ERROR: Removing scratch directory")
-            print "{}".format(session_id)
-        sys.exit(1)
-    data = req.json()
-
-    # Populate node addresses
-    nodeaddrs = {}
-    topology = {}
-    for key in nodelist:
-        nodetype = re.split('[0-9]', key)[0]
-        if not nodetype in nodeaddrs:
-            nodeaddrs[nodetype] = {}
-        nodeaddrs[nodetype][key] = re.split('\\/', \
-            data[session_id][key]['management']['ip-address'])[0]
-        if args.verbosity >= 2:
-            print_to_stderr("DEBUG: Node {} is of type {} and has mgmt IP {}"
-                            .format(key, nodetype, nodeaddrs[nodetype][key]))
-
-        topology[key] = {}
-        for key2 in data[session_id][key]:
-            topology[key]["nic-"+key2] = data[session_id][key][key2]
-            if 'ip-address' in topology[key]["nic-"+key2]:
-                if topology[key]["nic-"+key2]['ip-address'] is not None:
-                    topology[key]["nic-"+key2]['ip-addr'] = re.split('\\/', \
-                        topology[key]["nic-"+key2]['ip-address'])[0]
-
-    # Write ansible file
-    ansiblehosts = open(os.path.join(scratch_directory, 'ansible-hosts'), 'w')
-    for key1 in nodeaddrs:
-        ansiblehosts.write("[{}]\n".format(key1))
-        for key2 in nodeaddrs[key1]:
-            ansiblehosts.write("{} hostname={}\n".format(nodeaddrs[key1][key2],
-                                                         key2))
-    ansiblehosts.close()
-
-    # Process topology YAML template
-    with open(args.ssh_privkey, 'r') as privkey_file:
-        priv_key = indent(privkey_file.read(), 6)
-
-    with open(os.path.join(scratch_directory, "topology.yaml"), 'w') as \
-        new_file, open(topology_yaml_filename, 'r') as old_file:
-        for line in old_file:
-            new_file.write(line.format(priv_key=priv_key, topology=topology))
-
-    #
-    # Wait for hosts to become reachable over SSH
-    #
-    if args.verbosity >= 1:
-        print_to_stderr("DEBUG: Waiting for hosts to become reachable over SSH")
-
-    missing = -1
-    count = args.wait_count
-    while (count > 0) and missing != 0:
-        time.sleep(args.wait_time)
-        count -= 1
-
-        missing = 0
-        for key in nodelist:
-            if not os.path.exists(os.path.join(scratch_directory, key)):
-                missing += 1
-        if args.verbosity >= 2:
-            print_to_stderr("DEBUG: Attempt {} out of {}, waiting for {} hosts"
-                            .format(args.wait_count-count, args.wait_count,
-                                    missing))
-
-    if missing != 0:
-        print_to_stderr("ERROR: Simulation started OK but {} hosts never "
-                        "mounted their NFS directory".format(missing))
-        if not args.keep:
-            req = requests.get('http://' + args.virl_ip +
-                               '/simengine/rest/stop/' + session_id,
-                               auth=(args.username, args.password))
-            try:
-                shutil.rmtree(scratch_directory)
-            except:
-                print_to_stderr("ERROR: Removing scratch directory")
-            print "{}".format(session_id)
-        sys.exit(1)
-
-    #
-    # just decompress the DMM tar packages
-    #
-    if args.verbosity >= 1:
-        print_to_stderr("DEBUG: Uprading DMM")
-
-    for key1 in nodeaddrs:
-        if not key1 == 'tg':
-            for key2 in nodeaddrs[key1]:
-                ipaddr = nodeaddrs[key1][key2]
-                if args.verbosity >= 2:
-                    print_to_stderr("DEBUG: Upgrading DMM on node {}"
-                                    .format(ipaddr))
-                paramiko.util.log_to_file(os.path.join(scratch_directory,
-                                                       "ssh.log"))
-                client = paramiko.SSHClient()
-                client.load_system_host_keys()
-                client.load_host_keys("/dev/null")
-                client.set_missing_host_key_policy(paramiko.AutoAddPolicy())
-                client.connect(ipaddr, username=args.ssh_user,
-                               key_filename=args.ssh_privkey)
-                _, stdout, stderr = \
-                    client.exec_command('cd /scratch/dmmtest/ && sudo tar zxf dmm_depends.tar.gz')
-                c_stdout = stdout.read()
-                c_stderr = stderr.read()
-                if args.verbosity >= 2:
-                    print_to_stderr("DEBUG: Command output was:")
-                    print_to_stderr(c_stdout)
-                    print_to_stderr("DEBUG: Command stderr was:")
-                    print_to_stderr(c_stderr)
-
-    #
-    # Write a file with timestamp to scratch directory. We can use this to track
-    # how long a simulation has been running.
-    #
-    with open(os.path.join(scratch_directory, 'start_time'), 'a') as \
-        timestampfile:
-        timestampfile.write('{}\n'.format(int(time.time())))
-
-    #
-    # Declare victory
-    #
-    if args.verbosity >= 1:
-        print_to_stderr("SESSION ID: {}".format(session_id))
-
-    print "{}".format(session_id)
-
-if __name__ == "__main__":
-    sys.exit(main())
\ No newline at end of file
diff --git a/resources/tools/virl/bin/start-testcase-TLDK b/resources/tools/virl/bin/start-testcase-TLDK
deleted file mode 100755
index f6021dacbd..0000000000
--- a/resources/tools/virl/bin/start-testcase-TLDK
+++ /dev/null
@@ -1,542 +0,0 @@
-#!/usr/bin/python
-
-# Copyright (c) 2017 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-"""This script is handling starting of VIRL simulations."""
-
-import argparse
-import netifaces
-import os
-import paramiko
-import random
-import re
-import shutil
-import sys
-import tempfile
-import time
-
-import requests
-
-IPS_PER_SIMULATION = 5
-
-def indent(lines, amount, fillchar=' '):
-    """Indent the string by amount of fill chars.
-
-    :param lines: String to indent.
-    :param amount: Number of fill chars.
-    :param fillchar: Filling character.
-    :type lines: str
-    :type amount: int
-    :type fillchar: str
-    :returns: Indented string.
-    :rtype: str
-    """
-    padding = amount * fillchar
-    return padding + ('\n'+padding).join(lines.split('\n'))
-
-def print_to_stderr(msg, end='\n'):
-    """Writes any text to stderr.
-
-    :param msg: Message to print.
-    :param end: By default print new line at the end.
-    :type msg: str
-    :type end: str
-    """
-    try:
-        sys.stderr.write(str(msg) + end)
-    except ValueError:
-        pass
-
-def get_assigned_interfaces(args, network="flat"):
-    """Retrieve assigned interfaces in openstack network.
-
-    :param args: Command line params.
-    :param network: Openstack network.
-    :type args: ArgumentParser
-    :type network: str
-    :returns: Assigned interfaces.
-    :rtype: list
-    :raises RuntimeError: If response is not 200.
-    """
-    req = requests.get('http://{}/openstack/rest/ports/{}'
-                       .format(args.virl_ip, network),
-                       auth=(args.username, args.password))
-    if req.status_code == 200:
-        return req.json()
-    else:
-        raise RuntimeError("ERROR: Retrieving ports in use - "
-                           "Status other than 200 HTTP OK:\n{}"
-                           .format(req.content))
-
-def get_assigned_interfaces_count(args, network="flat"):
-    """Count assigned interfaces in openstack network.
-
-    :param args: Command line params.
-    :param network: Openstack network.
-    :type args: ArgumentParser
-    :type network: str
-    :returns: Assigned interfaces count.
-    :rtype: int
-    """
-    return len(get_assigned_interfaces(args, network=network))
-
-def check_ip_addresses(args):
-    """Check IP address availability.
-
-    :param args: Command line params.
-    :type args: ArgumentParser
-    :raises RuntimeError: If not enough free addresses available.
-    """
-    for i in range(args.wait_count):
-        if args.quota - \
-            get_assigned_interfaces_count(args) >= IPS_PER_SIMULATION:
-            break
-        if args.verbosity >= 2:
-            print_to_stderr("DEBUG: - Attempt {} out of {}, waiting for free "
-                            "IP addresses".format(i, args.wait_count))
-        # Wait random amount of time within range 1-3 minutes
-        time.sleep(random.randint(60, 180))
-    else:
-        raise RuntimeError("ERROR: Not enough IP addresses to run simulation")
-
-def check_virl_resources(args):
-    """Check virl resources availability.
-
-    :param args: Command line params.
-    :type args: ArgumentParser
-    """
-    check_ip_addresses(args)
-
-#
-# FIXME: Right now, this is really coded like a shell script, as one big
-# function executed in sequence. This should be broken down into multiple
-# functions.
-#
-def main():
-    """ Main function."""
-    #
-    # Get our default interface IP address. This will become the default
-    # value for the "NFS Server IP" option.
-    #
-    gws = netifaces.gateways()
-    addrs = netifaces.ifaddresses(gws['default'][netifaces.AF_INET][1])
-    default_addr = addrs[netifaces.AF_INET][0]['addr']
-
-    #
-    # Verify CLI parameters and try to download our VPP image into a temporary
-    # file first
-    #
-    parser = argparse.ArgumentParser()
-    parser.add_argument("topology", help="the base topology to be started")
-    parser.add_argument("packages", help="Path to the tldk package file that " +
-                        "is/are to be installed", nargs='+')
-    parser.add_argument("-c", "--copy", help="Copy the tldk packages, " +
-                        "leaving the originals in place. Default is to " +
-                        "move them.", action='store_true')
-    parser.add_argument("-k", "--keep", help="Keep (do not delete) the " +
-                        "simulation in case of error", action='store_true')
-    parser.add_argument("-v", "--verbosity", action="count", default=0)
-    parser.add_argument("-nip", "--nfs-server-ip", help="NFS server (our) IP " +
-                        "default is derived from routing table: " +
-                        "{}".format(default_addr), default=default_addr)
-    parser.add_argument("-ns", "--nfs-scratch-directory",
-                        help="Server location for NFS scratch diretory",
-                        default="/nfs/scratch")
-    parser.add_argument("-nc", "--nfs-common-directory",
-                        help="Server location for NFS common (read-only) " +
-                        "directory", default="/nfs/common")
-    parser.add_argument("-wc", "--wait-count",
-                        help="number of intervals to wait for simulation to " +
-                        "be ready", type=int, default=24)
-    parser.add_argument("-wt", "--wait-time",
-                        help="length of a single interval to wait for " +
-                        "simulation to be ready", type=int, default=5)
-    parser.add_argument("-vip", "--virl-ip",
-                        help="VIRL IP and Port (e.g. 127.0.0.1:19399)",
-                        default="127.0.0.1:19399")
-    parser.add_argument("-u", "--username", help="VIRL username",
-                        default="tb4-virl")
-    parser.add_argument("-au", "--admin-username", help="VIRL admin username",
-                        default="uwmadmin")
-    parser.add_argument("-p", "--password", help="VIRL password",
-                        default="Cisco1234")
-    parser.add_argument("-su", "--ssh-user", help="SSH username",
-                        default="cisco")
-    parser.add_argument("-e", "--expiry", help="Simulation expiry",
-                        default="120")
-    parser.add_argument("-spr", "--ssh-privkey", help="SSH private keyfile",
-                        default="/home/jenkins-in/.ssh/id_rsa_virl")
-    parser.add_argument("-spu", "--ssh-pubkey", help="SSH public keyfile",
-                        default="/home/jenkins-in/.ssh/id_rsa_virl.pub")
-    parser.add_argument("-r", "--release", help="VM disk image/release " +
-                        "(ex. \"csit-ubuntu-14.04.4_2016-05-25_1.0\")",
-                        default="csit-ubuntu-14.04.4_2016-05-25_1.0")
-    parser.add_argument("--topology-directory", help="Topology directory",
-                        default="/home/jenkins-in/testcase-infra/topologies")
-    parser.add_argument("-q", "--quota",
-                        help="VIRL quota for max number of allowed IPs",
-                        type=int, default=74)
-
-    args = parser.parse_args()
-
-    #
-    # Check if topology and template exist
-    #
-    if args.verbosity >= 2:
-        print_to_stderr("DEBUG: Running with topology {}"
-                        .format(args.topology))
-
-    topology_virl_filename = os.path.join(args.topology_directory,
-                                          args.topology + ".virl")
-    topology_yaml_filename = os.path.join(args.topology_directory,
-                                          args.topology + ".yaml")
-
-    if not os.path.isfile(topology_virl_filename):
-        print_to_stderr("ERROR: Topology VIRL file {} does not exist"
-                        .format(topology_virl_filename))
-        sys.exit(1)
-    if not os.path.isfile(topology_yaml_filename):
-        print_to_stderr("ERROR: Topology YAML file {} does not exist"
-                        .format(topology_yaml_filename))
-        sys.exit(1)
-
-    #
-    # Check if TLDK package exists
-    #
-    for package in args.packages:
-        if args.verbosity >= 2:
-            print_to_stderr("DEBUG: Checking if file {} exists"
-                            .format(package))
-        if not os.path.isfile(package):
-            print_to_stderr("ERROR: TLDK package {} does not exist."
-                            .format(package))
-            sys.exit(1)
-
-    #
-    # Start VIRL topology
-    #
-    if args.verbosity >= 1:
-        print "DEBUG: Starting VIRL topology"
-    temp_handle, temp_topology = tempfile.mkstemp()
-    with open(args.ssh_pubkey, 'r') as pubkey_file:
-        pub_key = pubkey_file.read().replace('\n', '')
-    with open(temp_topology, 'w') as new_file, \
-        open(topology_virl_filename, 'r') as old_file:
-        for line in old_file:
-            line = line.replace("  - VIRL-USER-SSH-PUBLIC-KEY", "  - "+pub_key)
-            line = line.replace("$$NFS_SERVER_SCRATCH$$", \
-                args.nfs_server_ip+":"+args.nfs_scratch_directory)
-            line = line.replace("$$NFS_SERVER_COMMON$$", \
-                args.nfs_server_ip+":"+args.nfs_common_directory)
-            line = line.replace("$$VM_IMAGE$$", "server-"+args.release)
-            new_file.write(line)
-    os.close(temp_handle)
-
-    try:
-        data = open(temp_topology, 'rb')
-        check_virl_resources(args)
-        req = requests.post('http://' + args.virl_ip + '/simengine/rest/launch',
-                            auth=(args.username, args.password),
-                            data=data)
-        if args.verbosity >= 2:
-            print_to_stderr("DEBUG: - Request URL {}"
-                            .format(req.url))
-            print_to_stderr("{}"
-                            .format(req.text))
-            print_to_stderr("DEBUG: - Response Code {}"
-                            .format(req.status_code))
-        new_file.close()
-        if req.status_code != 200:
-            raise RuntimeError("ERROR: Launching VIRL simulation - "
-                               "Status other than 200 HTTP OK:\n{}"
-                               .format(req.content))
-    except (requests.exceptions.RequestException,
-            RuntimeError) as ex_error:
-        print_to_stderr(ex_error)
-        os.remove(temp_topology)
-        sys.exit(1)
-
-    # If we got here, we had a good response. The response content is the
-    # session ID.
-    session_id = req.content
-    if args.verbosity >= 1:
-        print_to_stderr("DEBUG: VIRL simulation session-id: {}"
-                        .format(session_id))
-
-    # Set session expiry to autokill sessions if not done from jenkins
-    if not args.keep:
-        if args.verbosity >= 1:
-            print_to_stderr("DEBUG: Setting expire for session-id: {}"
-                            .format(session_id))
-        try:
-            req = requests.put('http://' + args.virl_ip +
-                               '/simengine/rest/admin-update/' + session_id +
-                               '/expiry',
-                               auth=(args.admin_username, args.password),
-                               params={'user': args.username,
-                                       'expires': args.expiry})
-            if args.verbosity >= 2:
-                print_to_stderr("DEBUG: - Request URL {}"
-                                .format(req.url))
-                print_to_stderr("{}"
-                                .format(req.text))
-                print_to_stderr("DEBUG: - Response Code {}"
-                                .format(req.status_code))
-            if req.status_code != 200:
-                raise RuntimeError("ERROR: Setting expiry to simulation - "
-                                   "Status other than 200 HTTP OK:\n{}"
-                                   .format(req.content))
-        except (requests.exceptions.RequestException,
-                RuntimeError) as ex_error:
-            print_to_stderr(ex_error)
-            req = requests.get('http://' + args.virl_ip +
-                               '/simengine/rest/stop/' + session_id,
-                               auth=(args.username, args.password))
-            os.remove(temp_topology)
-            print "{}".format(session_id)
-            sys.exit(1)
-
-    #
-    # Create simulation scratch directory. Move topology file into that
-    # directory. Copy or move TLDK packages into that directory.
-    #
-    scratch_directory = os.path.join(args.nfs_scratch_directory, session_id)
-    os.mkdir(scratch_directory)
-    shutil.move(temp_topology, os.path.join(scratch_directory,
-                                            "virl_topology.virl"))
-    os.mkdir(os.path.join(scratch_directory, "tldktest"))
-    for package in args.packages:
-        if args.copy:
-            shutil.copy(package, os.path.join(scratch_directory, "tldktest",
-                                              os.path.basename(package)))
-        else:
-            shutil.move(package, os.path.join(scratch_directory, "tldktest",
-                                              os.path.basename(package)))
-
-    #
-    # Wait for simulation to become active
-    #
-    if args.verbosity >= 1:
-        print_to_stderr("DEBUG: Waiting for simulation to become active")
-
-    sim_is_started = False
-    nodelist = []
-
-    count = args.wait_count
-    while (count > 0) and not sim_is_started:
-        time.sleep(args.wait_time)
-        count -= 1
-
-        req = requests.get('http://' + args.virl_ip + '/simengine/rest/nodes/' +
-                           session_id, auth=(args.username, args.password))
-        data = req.json()
-
-        active = 0
-        total = 0
-
-        # Flush the node list every time, keep the last one
-        nodelist = []
-
-        # Hosts are the keys of the inner dictionary
-        for key in data[session_id].keys():
-            if data[session_id][key]['management-proxy'] == "self":
-                continue
-            nodelist.append(key)
-            total += 1
-            if data[session_id][key]['state'] == "ACTIVE":
-                active += 1
-        if args.verbosity >= 2:
-            print_to_stderr("DEBUG: - Attempt {} out of {}, total {} hosts, "
-                            "{} active".format(args.wait_count-count,
-                                               args.wait_count, total, active))
-        if active == total:
-            sim_is_started = True
-
-    if not sim_is_started:
-        print_to_stderr("ERROR: Simulation nodes never changed to ACTIVE state")
-        print_to_stderr("Last VIRL response:")
-        print_to_stderr(data)
-        if not args.keep:
-            req = requests.get('http://' + args.virl_ip +
-                               '/simengine/rest/stop/' + session_id,
-                               auth=(args.username, args.password))
-            try:
-                shutil.rmtree(scratch_directory)
-            except shutil.Error:
-                print_to_stderr("ERROR: Removing scratch directory")
-            print "{}".format(session_id)
-        sys.exit(1)
-
-    if args.verbosity >= 2:
-        print_to_stderr("DEBUG: Nodes: {}"
-                        .format(", ".join(nodelist)))
-
-    #
-    # Fetch simulation's IPs and create files
-    # (ansible hosts file, topology YAML file)
-    #
-    try:
-        req = requests.get('http://' + args.virl_ip +
-                           '/simengine/rest/interfaces/' + session_id,
-                           auth=(args.username, args.password),
-                           params={'fetch-state': '1'})
-        if args.verbosity >= 2:
-            print_to_stderr("DEBUG: - Request URL {}"
-                            .format(req.url))
-            print_to_stderr("DEBUG: - Request Text")
-            print_to_stderr("{}".format(req.text))
-            print_to_stderr("DEBUG: - Response Code {}"
-                            .format(req.status_code))
-        if req.status_code != 200:
-            raise RuntimeError("ERROR:Fetching IP's of simulation - "
-                               "Status other than 200 HTTP OK:\n{}"
-                               .format(req.content))
-    except (requests.exceptions.RequestException,
-            RuntimeError) as ex_error:
-        print_to_stderr(ex_error)
-        if not args.keep:
-            req = requests.get('http://' + args.virl_ip +
-                               '/simengine/rest/stop/' + session_id,
-                               auth=(args.username, args.password))
-            try:
-                shutil.rmtree(scratch_directory)
-            except shutil.Error:
-                print_to_stderr("ERROR: Removing scratch directory")
-            print "{}".format(session_id)
-        sys.exit(1)
-    data = req.json()
-
-    # Populate node addresses
-    nodeaddrs = {}
-    topology = {}
-    for key in nodelist:
-        nodetype = re.split('[0-9]', key)[0]
-        if not nodetype in nodeaddrs:
-            nodeaddrs[nodetype] = {}
-        nodeaddrs[nodetype][key] = re.split('\\/', \
-            data[session_id][key]['management']['ip-address'])[0]
-        if args.verbosity >= 2:
-            print_to_stderr("DEBUG: Node {} is of type {} and has mgmt IP {}"
-                            .format(key, nodetype, nodeaddrs[nodetype][key]))
-
-        topology[key] = {}
-        for key2 in data[session_id][key]:
-            topology[key]["nic-"+key2] = data[session_id][key][key2]
-            if 'ip-address' in topology[key]["nic-"+key2]:
-                if topology[key]["nic-"+key2]['ip-address'] is not None:
-                    topology[key]["nic-"+key2]['ip-addr'] = re.split('\\/', \
-                        topology[key]["nic-"+key2]['ip-address'])[0]
-
-    # Write ansible file
-    ansiblehosts = open(os.path.join(scratch_directory, 'ansible-hosts'), 'w')
-    for key1 in nodeaddrs:
-        ansiblehosts.write("[{}]\n".format(key1))
-        for key2 in nodeaddrs[key1]:
-            ansiblehosts.write("{} hostname={}\n".format(nodeaddrs[key1][key2],
-                                                         key2))
-    ansiblehosts.close()
-
-    # Process topology YAML template
-    with open(args.ssh_privkey, 'r') as privkey_file:
-        priv_key = indent(privkey_file.read(), 6)
-
-    with open(os.path.join(scratch_directory, "topology.yaml"), 'w') as \
-        new_file, open(topology_yaml_filename, 'r') as old_file:
-        for line in old_file:
-            new_file.write(line.format(priv_key=priv_key, topology=topology))
-
-    #
-    # Wait for hosts to become reachable over SSH
-    #
-    if args.verbosity >= 1:
-        print_to_stderr("DEBUG: Waiting for hosts to become reachable over SSH")
-
-    missing = -1
-    count = args.wait_count
-    while (count > 0) and missing != 0:
-        time.sleep(args.wait_time)
-        count -= 1
-
-        missing = 0
-        for key in nodelist:
-            if not os.path.exists(os.path.join(scratch_directory, key)):
-                missing += 1
-        if args.verbosity >= 2:
-            print_to_stderr("DEBUG: Attempt {} out of {}, waiting for {} hosts"
-                            .format(args.wait_count-count, args.wait_count,
-                                    missing))
-
-    if missing != 0:
-        print_to_stderr("ERROR: Simulation started OK but {} hosts never "
-                        "mounted their NFS directory".format(missing))
-        if not args.keep:
-            req = requests.get('http://' + args.virl_ip +
-                               '/simengine/rest/stop/' + session_id,
-                               auth=(args.username, args.password))
-            try:
-                shutil.rmtree(scratch_directory)
-            except shutil.Error:
-                print_to_stderr("ERROR: Removing scratch directory")
-            print "{}".format(session_id)
-        sys.exit(1)
-
-    #
-    # just decompress the TLDK tar packages
-    #
-    if args.verbosity >= 1:
-        print_to_stderr("DEBUG: Uprading TLDK")
-
-    for key1 in nodeaddrs:
-        if not key1 == 'tg':
-            for key2 in nodeaddrs[key1]:
-                ipaddr = nodeaddrs[key1][key2]
-                if args.verbosity >= 2:
-                    print_to_stderr("DEBUG: Upgrading TLDK on node {}"
-                                    .format(ipaddr))
-                paramiko.util.log_to_file(os.path.join(scratch_directory,
-                                                       "ssh.log"))
-                client = paramiko.SSHClient()
-                client.load_system_host_keys()
-                client.load_host_keys("/dev/null")
-                client.set_missing_host_key_policy(paramiko.AutoAddPolicy())
-                client.connect(ipaddr, username=args.ssh_user,
-                               key_filename=args.ssh_privkey)
-                _, stdout, stderr = \
-                    client.exec_command('cd /scratch/tldktest/ && sudo tar zxf tldk_depends.tar.gz')
-                c_stdout = stdout.read()
-                c_stderr = stderr.read()
-                if args.verbosity >= 2:
-                    print_to_stderr("DEBUG: Command output was:")
-                    print_to_stderr(c_stdout)
-                    print_to_stderr("DEBUG: Command stderr was:")
-                    print_to_stderr(c_stderr)
-
-    #
-    # Write a file with timestamp to scratch directory. We can use this to track
-    # how long a simulation has been running.
-    #
-    with open(os.path.join(scratch_directory, 'start_time'), 'a') as \
-        timestampfile:
-        timestampfile.write('{}\n'.format(int(time.time())))
-
-    #
-    # Declare victory
-    #
-    if args.verbosity >= 1:
-        print_to_stderr("SESSION ID: {}".format(session_id))
-
-    print "{}".format(session_id)
-
-if __name__ == "__main__":
-    sys.exit(main())
\ No newline at end of file
diff --git a/resources/tools/virl/bin/stop-testcase b/resources/tools/virl/bin/stop-testcase
deleted file mode 100755
index 572d5d6e8d..0000000000
--- a/resources/tools/virl/bin/stop-testcase
+++ /dev/null
@@ -1,27 +0,0 @@
-#!/bin/bash
-
-# Copyright (c) 2016 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-VIRL_USER="tb4-virl"                                            # VIRL credentials (what one would enter in VMMaestro)
-VIRL_PASSWORD="Cisco1234"
-
-NFS_SCRATCH_SERVERDIR="/nfs/scratch"                            # Our own (NFS server) IP address, and directory locations.
-
-TESTCASE=$1
-
-if [ "x${TESTCASE}" != "x" ]
-then
-    virl_std_client -u $VIRL_USER -p $VIRL_PASSWORD simengine-stop --session-id $TESTCASE
-    sudo rm -fr ${NFS_SCRATCH_SERVERDIR}/${TESTCASE}
-fi