Add automated deployment of Honeycomb on DUTs

JIRA: CSIT-56

- create bootstrap_vpp_honeycomb.sh script which deploys VPP and Honeycomb
  on DUTs
- Modify start-testcase script

Change-Id: I88511479cb8681168675c934f4fccbea83fa34bc
Signed-off-by: Tibor Frank <tifrank@cisco.com>

2 files changed, 379 insertions, 0 deletions

diff --git a/resources/tools/testbed-setup/playbooks/03-virl-post-install.yaml b/resources/tools/testbed-setup/playbooks/03-virl-post-install.yaml
index 59bcfe9d65..b0e857ca57 100644
--- a/resources/tools/testbed-setup/playbooks/03-virl-post-install.yaml
+++ b/resources/tools/testbed-setup/playbooks/03-virl-post-install.yaml
@@ -41,6 +41,10 @@
     command: ln -sf /home/jenkins-in/testcase-infra/bin/start-testcase /home/jenkins-in/bin/start-testcase
     args:
       creates: /home/jenkins-in/bin/start-testcase
+  - name: Link start-honeycomb-testcase executable
+    command: ln -sf /home/jenkins-in/testcase-infra/bin/start-honeycomb-testcase /home/jenkins-in/bin/start-honeycomb-testcase
+    args:
+      creates: /home/jenkins-in/bin/start-honeycomb-testcase
   - name: Link stop-testcase executable
     command: ln -sf /home/jenkins-in/testcase-infra/bin/stop-testcase /home/jenkins-in/bin/stop-testcase
     args:
diff --git a/resources/tools/virl/bin/start-honeycomb-testcase b/resources/tools/virl/bin/start-honeycomb-testcase
new file mode 100755
index 0000000000..f38d1a783b
--- /dev/null
+++ b/resources/tools/virl/bin/start-honeycomb-testcase
@@ -0,0 +1,375 @@
+#!/usr/bin/python
+
+# Copyright (c) 2016 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+__author__ = 'ckoester@cisco.com'
+
+import sys
+import requests
+import re
+import os
+import argparse
+import tempfile
+import shutil
+import time
+import paramiko
+import netifaces
+
+# Commands needed to install VPP and Honeycomb from repository
+inst_cmds = [
+    'sudo rm /etc/apt/sources.list.d/99fd.io.list || true',
+    'echo "deb [trusted=yes] https://nexus.fd.io/content/repositories/'
+    'fd.io.master.ubuntu.trusty.main/ ./" | '
+    'sudo tee -a /etc/apt/sources.list.d/99fd.io.list',
+    'sudo apt-get -y update',
+    'sudo apt-get -y install vpp vpp-dbg vpp-dev vpp-dpdk-dev vpp-dpdk-dkms '
+    'vpp-lib honeycomb'
+]
+
+#
+# Helper function to indent a text string
+#
+def indent(lines, amount, fillchar=' '):
+    padding = amount * fillchar
+    return padding + ('\n'+padding).join(lines.split('\n'))
+
+def perform_remote_command(ssh_client, cmd, verbosity):
+    """This function performs a command on the specified remote host using given
+    ssh client. Depending on the level of verbosity, it prints stdout and
+    stderr.
+
+    :param ssh_client: SSH client used for communication.
+    :param cmd: Command to be performed on th rremote client.
+    :param verbosity: Verbosity level.
+    :type ssh_client: paramiko.SSHClient
+    :type cmd: str
+    :type verbosity: int
+    """
+
+    _, stdout, stderr = ssh_client.exec_command(cmd)
+    c_stdout = stdout.read()
+    c_stderr = stderr.read()
+    if verbosity >= 2:
+        print("DEBUG: Command output was:\n{0}".format(c_stdout))
+        print("DEBUG: Command stderr was:\n{0}".format(c_stderr))
+
+#
+# Main function.
+# FIXME: Right now, this is really coded like a shell script, as one big
+# function executed in sequence. This should be broken down into multiple
+# functions.
+#
+def main():
+    #
+    # Get our default interface IP address. This will become the default
+    # value for the "NFS Server IP" option.
+    #
+    gws = netifaces.gateways()
+    addrs = netifaces.ifaddresses(gws['default'][netifaces.AF_INET][1])
+    default_addr = addrs[netifaces.AF_INET][0]['addr']
+
+    #
+    # Verify CLI parameters and try to download our VPP image into a temporary
+    # file first
+    #
+    parser = argparse.ArgumentParser()
+    parser.add_argument("topology", help="the base topology to be started")
+    parser.add_argument("-k", "--keep", help="Keep (do not delete) the " +
+                        "simulation in case of error", action='store_true')
+    parser.add_argument("-v", "--verbosity", action="count", default=0)
+    parser.add_argument("-nip", "--nfs-server-ip", help="NFS server (our) IP " +
+                        "default is derived from routing table: " +
+                        "{}".format(default_addr), default=default_addr)
+    parser.add_argument("-ns", "--nfs-scratch-directory",
+                        help="Server location for NFS scratch diretory",
+                        default="/nfs/scratch")
+    parser.add_argument("-nc", "--nfs-common-directory",
+                        help="Server location for NFS common (read-only) " +
+                        "directory", default="/nfs/common")
+    parser.add_argument("-wc", "--wait-count",
+                        help="number of intervals to wait for simulation to " +
+                        "be ready", type=int, default=24)
+    parser.add_argument("-wt", "--wait-time",
+                        help="length of a single interval to wait for " +
+                        "simulation to be ready", type=int, default=5)
+    parser.add_argument("-vip", "--virl-ip",
+                        help="VIRL IP and Port (e.g. 127.0.0.1:19399)",
+                        default="127.0.0.1:19399")
+    parser.add_argument("-u", "--username", help="VIRL username",
+                        default="tb4-virl")
+    parser.add_argument("-p", "--password", help="VIRL password",
+                        default="Cisco1234")
+    parser.add_argument("-su", "--ssh-user", help="SSH username",
+                        default="cisco")
+    parser.add_argument("-spr", "--ssh-privkey", help="SSH private keyfile",
+                        default="/home/jenkins-in/.ssh/id_rsa_virl")
+    parser.add_argument("-spu", "--ssh-pubkey", help="SSH public keyfile",
+                        default="/home/jenkins-in/.ssh/id_rsa_virl.pub")
+    parser.add_argument("-r", "--release", help="VM disk image/release " +
+                        "(ex. \"csit-ubuntu-14.04.4_2016-05-25_1.0\")",
+                        default="csit-ubuntu-14.04.4_2016-05-25_1.0")
+    parser.add_argument("--topology-directory", help="Topology directory",
+                        default="/home/jenkins-in/testcase-infra/topologies")
+
+    args = parser.parse_args()
+
+    #
+    # Check if topology and template exist
+    #
+    if args.verbosity >= 2:
+        print "DEBUG: Running with topology {}".format(args.topology)
+
+    topology_virl_filename = os.path.join(args.topology_directory,
+                                          args.topology + ".virl")
+    topology_yaml_filename = os.path.join(args.topology_directory,
+                                          args.topology + ".yaml")
+
+    if not os.path.isfile(topology_virl_filename):
+        print "ERROR: Topology VIRL file {} does not exist".\
+            format(topology_virl_filename)
+        sys.exit(1)
+    if not os.path.isfile(topology_yaml_filename):
+        print "ERROR: Topology YAML file {} does not exist".\
+            format(topology_yaml_filename)
+        sys.exit(1)
+
+    #
+    # Start VIRL topology
+    #
+    if args.verbosity >= 1:
+        print "DEBUG: Starting VIRL topology"
+    temp_handle, temp_topology = tempfile.mkstemp()
+    with open(args.ssh_pubkey, 'r') as pubkey_file:
+        pub_key = pubkey_file.read().replace('\n', '')
+    with open(temp_topology, 'w') as new_file, \
+        open(topology_virl_filename, 'r') as old_file:
+        for line in old_file:
+            line = line.replace("  - VIRL-USER-SSH-PUBLIC-KEY", "  - "+pub_key)
+            line = line.replace("$$NFS_SERVER_SCRATCH$$", \
+                args.nfs_server_ip+":"+args.nfs_scratch_directory)
+            line = line.replace("$$NFS_SERVER_COMMON$$", \
+                args.nfs_server_ip+":"+args.nfs_common_directory)
+            line = line.replace("$$VM_IMAGE$$", "server-"+args.release)
+            new_file.write(line)
+    os.close(temp_handle)
+
+    try:
+        new_file = open(temp_topology, 'rb')
+        headers = {'Content-Type': 'text/xml'}
+        req = requests.post('http://' + args.virl_ip + '/simengine/rest/launch',
+                            headers=headers,
+                            auth=(args.username, args.password), data=new_file)
+        if args.verbosity >= 2:
+            print "DEBUG: - Response Code {}".format(req.status_code)
+        new_file.close()
+
+    except:
+        print "ERROR: Launching VIRL simulation - received invalid response"
+        print req
+        os.remove(temp_topology)
+        sys.exit(1)
+
+    if req.status_code != 200:
+        print "ERROR: Launching VIRL simulation - received status other " + \
+            "than 200 HTTP OK"
+        print "Status was: {} \n".format(req.status_code)
+        print "Response content was: "
+        print req.content
+        os.remove(temp_topology)
+        sys.exit(1)
+
+    # If we got here, we had a good response. The response content is the
+    # session ID.
+    session_id = req.content
+
+    #
+    # Create simulation scratch directory. Move topology file into that
+    # directory. Copy or move debian packages into that directory.
+    #
+    scratch_directory = os.path.join(args.nfs_scratch_directory, session_id)
+    os.mkdir(scratch_directory)
+    shutil.move(temp_topology, os.path.join(scratch_directory,
+                                            "virl_topology.virl"))
+    os.mkdir(os.path.join(scratch_directory, "vpp"))
+
+    #
+    # Wait for simulation to become active
+    #
+    if args.verbosity >= 1:
+        print "DEBUG: Waiting for simulation to become active"
+
+    sim_is_started = False
+    nodelist = []
+
+    count = args.wait_count
+    while (count > 0) and not sim_is_started:
+        time.sleep(args.wait_time)
+        count -= 1
+
+        req = requests.get('http://' + args.virl_ip + '/simengine/rest/nodes/' +
+                           session_id, auth=(args.username, args.password))
+        data = req.json()
+
+        active = 0
+        total = 0
+
+        # Flush the node list every time, keep the last one
+        nodelist = []
+
+        # Hosts are the keys of the inner dictionary
+        for key in data[session_id].keys():
+            if data[session_id][key]['management-proxy'] == "self":
+                continue
+            nodelist.append(key)
+            total += 1
+            if data[session_id][key]['state'] == "ACTIVE":
+                active += 1
+        if args.verbosity >= 2:
+            print "DEBUG: - Attempt {} out of {}, total {} hosts, {} active".\
+                format(args.wait_count-count, args.wait_count, total, active)
+        if active == total:
+            sim_is_started = True
+
+    if not sim_is_started:
+        print "ERROR: Simulation started OK but devices never changed to " + \
+            "ACTIVE state"
+        print "Last VIRL response:"
+        print data
+        if not args.keep:
+            shutil.rmtree(scratch_directory)
+            req = requests.get('http://' + args.virl_ip +
+                               '/simengine/rest/stop/' + session_id,
+                               auth=(args.username, args.password))
+
+    if args.verbosity >= 2:
+        print "DEBUG: Nodes: " + ", ".join(nodelist)
+
+    #
+    # Fetch simulation's IPs and create files
+    # (ansible hosts file, topology YAML file)
+    #
+    req = requests.get('http://' + args.virl_ip +
+                       '/simengine/rest/interfaces/' + session_id +
+                       '?fetch-state=1', auth=(args.username, args.password))
+    data = req.json()
+
+    # Populate node addresses
+    nodeaddrs = {}
+    topology = {}
+    for key in nodelist:
+        nodetype = re.split('[0-9]', key)[0]
+        if not nodetype in nodeaddrs:
+            nodeaddrs[nodetype] = {}
+        nodeaddrs[nodetype][key] = re.split('\\/', \
+            data[session_id][key]['management']['ip-address'])[0]
+        if args.verbosity >= 2:
+            print "DEBUG: Node {} is of type {} and has management IP {}".\
+                format(key, nodetype, nodeaddrs[nodetype][key])
+
+        topology[key] = {}
+        for key2 in data[session_id][key]:
+            topology[key]["nic-"+key2] = data[session_id][key][key2]
+            if 'ip-address' in topology[key]["nic-"+key2]:
+                if topology[key]["nic-"+key2]['ip-address'] is not None:
+                    topology[key]["nic-"+key2]['ip-addr'] = re.split('\\/', \
+                        topology[key]["nic-"+key2]['ip-address'])[0]
+
+    # Write ansible file
+    ansiblehosts = open(os.path.join(scratch_directory, 'ansible-hosts'), 'w')
+    for key1 in nodeaddrs:
+        ansiblehosts.write("[{}]\n".format(key1))
+        for key2 in nodeaddrs[key1]:
+            ansiblehosts.write("{} hostname={}\n".format(nodeaddrs[key1][key2],
+                                                         key2))
+    ansiblehosts.close()
+
+    # Process topology YAML template
+    with open(args.ssh_privkey, 'r') as privkey_file:
+        priv_key = indent(privkey_file.read(), 6)
+
+    with open(os.path.join(scratch_directory, "topology.yaml"), 'w') as \
+        new_file, open(topology_yaml_filename, 'r') as old_file:
+        for line in old_file:
+            new_file.write(line.format(priv_key=priv_key, topology=topology))
+
+    #
+    # Wait for hosts to become reachable over SSH
+    #
+    if args.verbosity >= 1:
+        print "DEBUG: Waiting for hosts to become reachable using SSH"
+
+    missing = -1
+    count = args.wait_count
+    while (count > 0) and missing != 0:
+        time.sleep(args.wait_time)
+        count -= 1
+
+        missing = 0
+        for key in nodelist:
+            if not os.path.exists(os.path.join(scratch_directory, key)):
+                missing += 1
+        if args.verbosity >= 2:
+            print "DEBUG: - Attempt {} out of {}, waiting for {} hosts".\
+                format(args.wait_count-count, args.wait_count, missing)
+
+    if missing != 0:
+        print "ERROR: Simulation started OK but {} hosts ".format(missing) + \
+            "never mounted their NFS directory"
+        if not args.keep:
+            shutil.rmtree(scratch_directory)
+            req = requests.get('http://' + args.virl_ip +
+                               '/simengine/rest/stop/' + session_id,
+                               auth=(args.username, args.password))
+
+    #
+    # Upgrade VPP
+    #
+    if args.verbosity >= 1:
+        print("DEBUG: Uprading VPP")
+
+    for key1 in nodeaddrs:
+        if not key1 == 'tg':
+            for key2 in nodeaddrs[key1]:
+                ipaddr = nodeaddrs[key1][key2]
+                if args.verbosity >= 2:
+                    print("DEBUG: Upgrading VPP on node {}".format(ipaddr))
+                paramiko.util.log_to_file(os.path.join(scratch_directory,
+                                                       "ssh.log"))
+                client = paramiko.SSHClient()
+                client.load_system_host_keys()
+                client.load_host_keys("/dev/null")
+                client.set_missing_host_key_policy(paramiko.AutoAddPolicy())
+                client.connect(ipaddr, username=args.ssh_user,
+                               key_filename=args.ssh_privkey)
+                for cmd in inst_cmds:
+                    perform_remote_command(client, cmd, args.verbosity)
+
+    #
+    # Write a file with timestamp to scratch directory. We can use this to track
+    # how long a simulation has been running.
+    #
+    with open(os.path.join(scratch_directory, 'start_time'), 'a') as \
+        timestampfile:
+        timestampfile.write('{}\n'.format(int(time.time())))
+
+    #
+    # Declare victory
+    #
+    if args.verbosity >= 1:
+        print "SESSION ID: {}".format(session_id)
+
+    print "{}".format(session_id)
+
+if __name__ == "__main__":
+    sys.exit(main())