Separate files needing GPL license

+ Keep apache license for now, until this is completed:
  https://wiki.fd.io/view/TSC/Relicensing_Procedure
+ Add utilities for switching license comment blocks.
 - They do not preserve attributes, so executable flag is lost.
+ Move the affected files to GPL/.
 + Update paths so files are executed from the new location.
 + Change the way scripts are started to do not require executable flag.
 + Employ OptionString when constructing longer command lines.
+ Move also PacketVerifier.py and TrafficScriptArg.py
  as they are linked with traffic scripts.
 + That means the two files are outside "resources" package tree now.
 + Added __init__.py files so relative imports work in new package tree.
+ Start traffic scripts as python modules to allow relative imports.
 + Once again needed because they are outside the default PYTHONPATH.

Change-Id: Ieb135629e890adbaf5b79497570f3be25b746f9f
Signed-off-by: Vratko Polak <vrpolak@cisco.com>

1 files changed, 0 insertions, 134 deletions

diff --git a/resources/traffic_profiles/trex/trex-sl-2n-dot1qip6asym-ip6src253.py b/resources/traffic_profiles/trex/trex-sl-2n-dot1qip6asym-ip6src253.py
deleted file mode 100644
index f2e9e81920..0000000000
--- a/resources/traffic_profiles/trex/trex-sl-2n-dot1qip6asym-ip6src253.py
+++ /dev/null
@@ -1,134 +0,0 @@
-# Copyright (c) 2020 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-"""Stream profile for T-rex traffic generator.
-
-Stream profile:
- - Two streams sent in directions 0 --> 1 and 1 --> 0 at the same time.
- - Direction 0 --> 1:
-   - Packet: ETH / IPv6 /
-   - Source IP address range:      2001:1::2 - 2001:1::FE
-   - Destination IP address range: 2001:2::2
- - Direction 1 --> 0:
-   - Packet: ETH / DOT1Q / IPv6 /
-   - Source IP address range:      2001:2::2 - 2001:2::FE
-   - Destination IP address range: 2001:1::2
-"""
-
-from trex.stl.api import *
-from profile_trex_stateless_base_class import TrafficStreamsBaseClass
-
-
-class TrafficStreams(TrafficStreamsBaseClass):
-    """Stream profile."""
-
-    def __init__(self):
-        """Initialization and setting of streams' parameters."""
-
-        super(TrafficStreamsBaseClass, self).__init__()
-
-        # VLAN ID
-        self.vlan_id = 10
-
-        # IPs used in packet headers.
-        self.p1_src_start_ip = u"2001:1::2"
-        self.p1_src_end_ip = u"2001:1::FE"
-        self.p1_dst_start_ip = u"2001:2::2"
-
-        self.p2_src_start_ip = u"2001:2::2"
-        self.p2_src_end_ip = u"2001:2::FE"
-        self.p2_dst_start_ip = u"2001:1::2"
-
-    def define_packets(self):
-        """Defines the packets to be sent from the traffic generator.
-
-        Packet definition: | ETH | IPv6 |
-
-        :returns: Packets to be sent from the traffic generator.
-        :rtype: tuple
-        """
-
-        base_p1, count_p1 = self._get_start_end_ipv6(
-            self.p1_src_start_ip,
-            self.p1_src_end_ip
-        )
-        base_p2, count_p2 = self._get_start_end_ipv6(
-            self.p2_src_start_ip,
-            self.p2_src_end_ip
-        )
-
-        # Direction 0 --> 1
-        base_pkt_a = (
-            Ether() /
-            IPv6(
-                src=self.p1_src_start_ip,
-                dst=self.p1_dst_start_ip
-            )
-        )
-        # Direction 1 --> 0
-        base_pkt_b = (
-            Ether() /
-            Dot1Q(
-                vlan=self.vlan_id
-            ) /
-            IPv6(
-                src=self.p2_src_start_ip,
-                dst=self.p2_dst_start_ip
-            )
-        )
-
-        # Direction 0 --> 1
-        vm1 = STLScVmRaw(
-            [
-                STLVmFlowVar(
-                    name=u"ipv6_src",
-                    min_value=base_p1,
-                    max_value=base_p1 + count_p1,
-                    size=8, op=u"inc"
-                ),
-                STLVmWrFlowVar(
-                    fv_name=u"ipv6_src",
-                    pkt_offset=u"IPv6.src",
-                    offset_fixup=8
-                )
-            ]
-        )
-        # Direction 1 --> 0
-        vm2 = STLScVmRaw(
-            [
-                STLVmFlowVar(
-                    name=u"ipv6_src",
-                    min_value=base_p2,
-                    max_value=base_p2 + count_p2,
-                    size=8, op=u"inc"
-                ),
-                STLVmWrFlowVar(
-                    fv_name=u"ipv6_src",
-                    pkt_offset=u"IPv6.src",
-                    offset_fixup=8
-                )
-            ]
-        )
-
-        return base_pkt_a, base_pkt_b, vm1, vm2
-
-
-def register():
-    """Register this traffic profile to T-rex.
-
-    Do not change this function.
-
-    :returns: Traffic streams.
-    :rtype: Object
-    """
-    return TrafficStreams()