HONEYCOMB: Remove

Signed-off-by: Peter Mikus <pmikus@cisco.com>
Change-Id: I60d80564050cb786c7b1e0a08f31f8292f82197e

2 files changed, 0 insertions, 444 deletions

diff --git a/resources/traffic_scripts/honeycomb/bgp_open.py b/resources/traffic_scripts/honeycomb/bgp_open.py
deleted file mode 100755
index e7bb7d841a..0000000000
--- a/resources/traffic_scripts/honeycomb/bgp_open.py
+++ /dev/null
@@ -1,85 +0,0 @@
-#!/usr/bin/env python
-# Copyright (c) 2016 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-"""Traffic script that listens for incoming BGP connections and verifies
-received GBP Open message."""
-
-import sys
-import socket
-
-from scapy.main import load_contrib
-from scapy.layers.inet import Raw
-from scapy.contrib.bgp import BGPHeader, BGPOpen
-
-from resources.libraries.python.TrafficScriptArg import TrafficScriptArg
-
-
-def main():
-    """Open a TCP listener socket on the default BGP port. Accept an incoming
-    connection, receive data and verify if data is a valid BGP Open message."""
-    args = TrafficScriptArg(['rx_ip', 'src_ip', 'rx_port', 'as_number',
-                             'holdtime'])
-
-    rx_ip = args.get_arg('rx_ip')
-    src_ip = args.get_arg('src_ip')
-    rx_port = int(args.get_arg('rx_port'))
-    as_number = int(args.get_arg('as_number'))
-    holdtime = int(args.get_arg('holdtime'))
-
-    load_contrib("bgp")
-
-    soc = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
-    soc.bind((rx_ip, rx_port))
-    soc.listen(1)
-
-    print "Listener active, awaiting connection..."
-    soc.settimeout(8)
-    conn, addr = soc.accept()
-    print 'Connection established with peer:', addr
-
-    data = conn.recv(256)
-    conn.close()
-    soc.close()
-
-    bgp_layer = (BGPHeader(Raw(data).load))
-    bgp_layer.show()
-
-    if not bgp_layer.haslayer(BGPOpen):
-        raise RuntimeError("Received data is not a BGP OPEN message.")
-    bgp_open = bgp_layer.getlayer(BGPOpen)
-    if bgp_open.bgp_id != src_ip:
-        raise RuntimeError(
-            "BGP ID mismatch. Received {0} but should be {1}".
-            format(bgp_open.bgp_id, src_ip))
-    else:
-        print "BGP ID matched."
-
-    if bgp_open.AS != as_number:
-        raise RuntimeError(
-            "BGP AS number mismatch. Received {0} but should be {1}".
-            format(bgp_open.AS, as_number))
-    else:
-        print "BGP AS number matched."
-
-    if bgp_open.hold_time != holdtime:
-        raise RuntimeError(
-            "Hold Time parameter mismatch. Received {0} but should be {1}.".
-            format(bgp_layer.getlayer(BGPOpen).holdtime, holdtime))
-    else:
-        print "BGP Hold Time parameter matched."
-
-    sys.exit(0)
-
-if __name__ == "__main__":
-    main()
diff --git a/resources/traffic_scripts/honeycomb/read_vpp_version.py b/resources/traffic_scripts/honeycomb/read_vpp_version.py
deleted file mode 100755
index 6a275e7c0f..0000000000
--- a/resources/traffic_scripts/honeycomb/read_vpp_version.py
+++ /dev/null
@@ -1,359 +0,0 @@
-# Copyright (c) 2017 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-import socket
-import multiprocessing
-import argparse
-from time import time
-
-
-class Counter(object):
-    """Counter used for stats collection."""
-    def __init__(self, start=0):
-        """Initializer."""
-        self.lock = multiprocessing.Lock()
-        self.value = start
-
-    def increment(self, value=1):
-        """Increment counter and return the new value."""
-        self.lock.acquire()
-        val = self.value
-        try:
-            self.value += value
-        finally:
-            self.lock.release()
-        return val
-
-
-class timer(object):
-    """Timer used used during test execution."""
-    def __init__(self, verbose=False):
-        self.verbose = verbose
-
-    def __enter__(self):
-        """Start the timer."""
-        self.start = time()
-        return self
-
-    def __exit__(self, *args):
-        """Stop the timer and save current value."""
-        self.end = time()
-        self.secs = self.end - self.start
-        self.msecs = self.secs * 1000  # millisecs
-        if self.verbose:
-            print("elapsed time: {0} ms".format(self.msecs))
-
-
-class ConfigBlaster(object):
-    """Generates Netconf requests, receives replies and collects statistics."""
-
-    TIMEOUT = 10
-
-    # Hello message with capabilities list for Netconf sessions.
-    hello = u"""<hello xmlns="urn:ietf:params:xml:ns:netconf:base:1.0"
-    message-id="m-0">
-    <capabilities>
-    <capability>urn:ietf:params:netconf:base:1.0</capability>
-    </capabilities>
-    </hello>
-    ]]>]]>"""
-
-    # RPC to retrieve VPP version (minimal processing in VPP)
-    request_template = u"""<rpc xmlns="urn:ietf:params:xml:ns:netconf:base:1.0"
-    message-id="m-1">
-    <get>
-    <filter xmlns:ns0="urn:ietf:params:xml:ns:netconf:base:1.0"
-    ns0:type="subtree">
-    <vpp-state xmlns="http://fd.io/hc2vpp/yang/vpp-management">
-    <version/>
-    </vpp-state>
-    </filter>
-    </get>
-    </rpc>
-    ]]>]]>"""
-
-    class Stats(object):
-        """Stores and further processes statistics collected by worker
-        threads during their execution.
-        """
-
-        def __init__(self):
-            """Initializer."""
-            self.ok_rqst_rate = Counter(0)
-            self.total_rqst_rate = Counter(0)
-            self.ok_rqsts = Counter(0)
-            self.total_rqsts = Counter(0)
-
-        def process_stats(self, rqst_stats, elapsed_time):
-            """Calculates the stats for request/reply throughput, and aggregates
-            statistics across all threads.
-
-            :param rqst_stats: Request statistics dictionary.
-            :param elapsed_time: Elapsed time for the test.
-            :type rqst_stats: dict
-            :type elapsed_time: int
-            :returns: Rates (requests/sec) for successfully finished requests
-                     and the total number of requests.
-            :rtype: tuple
-            """
-            ok_rqsts = rqst_stats["OK"]
-            total_rqsts = sum(rqst_stats.values())
-
-            ok_rqst_rate = ok_rqsts / elapsed_time
-            total_rqst_rate = total_rqsts / elapsed_time
-
-            self.ok_rqsts.increment(ok_rqsts)
-            self.total_rqsts.increment(total_rqsts)
-
-            self.ok_rqst_rate.increment(ok_rqst_rate)
-            self.total_rqst_rate.increment(total_rqst_rate)
-
-            return ok_rqst_rate, total_rqst_rate
-
-        @property
-        def get_ok_rqst_rate(self):
-            return self.ok_rqst_rate.value
-
-        @property
-        def get_total_rqst_rate(self):
-            return self.total_rqst_rate.value
-
-        @property
-        def get_ok_rqsts(self):
-            return self.ok_rqsts.value
-
-        @property
-        def get_total_rqsts(self):
-            return self.total_rqsts.value
-
-    def __init__(self, host, port, ncycles, nthreads, nrequests):
-        """Initializer.
-
-        :param host: Target IP address.
-        :param port: Target port.
-        :param ncycles: Number of test cycles.
-        :param nthreads: Number of threads for packet generation.
-        :param nrequests: Number of requests to send per thread.
-        :type host: str
-        :type port: int
-        :type ncycles: int
-        :type nthreads: int
-        :type nrequests: int
-        """
-
-        self.host = host
-        self.port = port
-        self.ncycles = ncycles
-        self.nthreads = nthreads
-        self.nrequests = nrequests
-
-        self.stats = self.Stats()
-        self.total_ok_rqsts = 0
-
-        self.print_lock = multiprocessing.Lock()
-        self.cond = multiprocessing.Condition()
-        self.threads_done = 0
-
-        self.recv_buf = 8192
-
-    def send_request(self, sock):
-        """Send Netconf request and receive the reply.
-
-        :param sock: Socket object to use for transfer.
-        :type sock: socket object
-        :returns: Response to request or error message.
-        :rtype: str
-        """
-
-        sock.send(self.request_template)
-        try:
-            return sock.recv(self.recv_buf)
-        except socket.timeout:
-            return "timeout"
-        except socket.error:
-            return "error"
-
-    def send_requests(self, tid, stats):
-        """Read entries from the Honeycomb operational data store. This function
-        is executed by a worker thread.
-
-        :param tid: Thread ID - used to id the Blaster thread when
-        statistics for the thread are printed out.
-        :param stats: Synchronized queue object for returning execution stats.
-        :type tid: int
-        :type stats: multiprocessing.Queue
-        """
-
-        rqst_stats = {"OK": 0, "Error": 0, "Timeout": 0}
-
-        sock = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
-        sock.settimeout(5)
-        # Initiate connection
-        sock.connect((self.host, self.port))
-        # Send hello message
-        sock.send(self.hello)
-        # Receive hello message
-        sock.recv(self.recv_buf)
-        # Determine length of expected responses
-        self.recv_buf = len(self.send_request(sock))
-
-        with self.print_lock:
-            print("\n    Thread {0}:\n"
-                  "        Sending {1} requests".format(tid,
-                                                        self.nrequests))
-
-        replies = [None]*self.nrequests
-        with timer() as t:
-            for x in range(self.nrequests):
-                sts = self.send_request(sock)
-                replies[x] = sts
-
-        for reply in replies:
-            if reply == "timeout":
-                rqst_stats["Timeout"] += 1
-            elif "error" in reply:
-                rqst_stats["Error"] += 1
-            else:
-                rqst_stats["OK"] += 1
-
-        ok_rps, total_rps = self.stats.process_stats(
-            rqst_stats, t.secs)
-
-        with self.print_lock:
-            print("\n    Thread {0} results (READ): ".format(tid))
-            print("        Elapsed time: {0:.2f}s,".format(t.secs))
-            print("        Requests/s: {0:.2f} OK, {1:.2f} Total".format(
-                ok_rps, total_rps))
-            print("        Stats ({Requests}, {entries}): "),
-            print(rqst_stats)
-            self.threads_done += 1
-
-        sock.close()
-
-        stats.put({"stats": rqst_stats, "time": t.secs})
-
-        with self.cond:
-            self.cond.notify_all()
-
-    def run_cycle(self, function):
-        """Runs a test cycle. Each test consists of <cycles> test cycles, where
-        <threads> worker threads are started in each test cycle. Each thread
-        reads <requests> entries using Netconf RPCs.
-
-        :param function: Function to be executed in each thread.
-        :type function: function
-        """
-
-        self.total_ok_rqsts = 0
-        stats_queue = multiprocessing.Queue()
-
-        for c in range(self.ncycles):
-            self.stats = self.Stats()
-            with self.print_lock:
-                print "\nCycle {0}:".format(c)
-
-            threads = []
-            thread_stats = []
-            for i in range(self.nthreads):
-                t = multiprocessing.Process(target=function,
-                                            args=(i, stats_queue))
-                threads.append(t)
-                t.start()
-
-            # Wait for all threads to finish and measure the execution time
-            with timer() as t:
-                for _ in threads:
-                    thread_stats.append(stats_queue.get())
-                for thread in threads:
-                    thread.join()
-
-            for item in thread_stats:
-                self.stats.process_stats(item["stats"], item["time"])
-
-            with self.print_lock:
-                print("\n*** Test summary:")
-                print("    Elapsed time:    {0:.2f}s".format(t.secs))
-                print(
-                    "    Peak requests/s: {0:.2f} OK, {1:.2f} Total".format(
-                        self.stats.get_ok_rqst_rate,
-                        self.stats.get_total_rqst_rate))
-                print(
-                    "    Avg. requests/s: {0:.2f} OK, {1:.2f} Total ({2:.2f} "
-                    "of peak total)".format(
-                        self.stats.get_ok_rqsts / t.secs,
-                        self.stats.get_total_rqsts / t.secs,
-                        (self.stats.get_total_rqsts / t.secs * 100) /
-                        self.stats.get_total_rqst_rate))
-
-            self.total_ok_rqsts += self.stats.get_ok_rqsts
-
-            self.threads_done = 0
-
-    def add_blaster(self):
-        """Run the test."""
-        self.run_cycle(self.send_requests)
-
-    @property
-    def get_ok_rqsts(self):
-        return self.total_ok_rqsts
-
-
-def create_arguments_parser():
-    """Creates argument parser for test script.
-    Shorthand to arg parser on library level in order to access and
-    eventually enhance in ancestors.
-
-    :returns: argument parser supporting arguments and parameters
-    :rtype: argparse.ArgumentParser
-    """
-    my_parser = argparse.ArgumentParser(
-        description="entry reading performance test: Reads entries from "
-                    "the config tree, as specified by optional parameters.")
-
-    my_parser.add_argument(
-        "--host", default="127.0.0.1",
-        help="Host where odl controller is running (default is 127.0.0.1).")
-    my_parser.add_argument(
-        "--port", default=7777,
-        help="Port on which Honeycomb's Netconf is listening"
-             " (default is 7777 for TCP)")
-    my_parser.add_argument(
-        "--cycles", type=int, default=1,
-        help="Number of entry read cycles; default 1. <THREADS> worker threads "
-             "are started in each cycle and the cycle ends when all threads "
-             "finish. Another cycle is started when the previous cycle "
-             "is finished.")
-    my_parser.add_argument(
-        "--threads", type=int, default=1,
-        help="Number of request worker threads to start in each cycle; "
-             "default=1. Each thread will read <entries> entries.")
-    my_parser.add_argument(
-        "--requests", type=int, default=10,
-        help="Number of requests that will be made by each worker thread "
-             "in each cycle; default 10")
-
-    return my_parser
-
-if __name__ == "__main__":
-
-    parser = create_arguments_parser()
-    in_args = parser.parse_args()
-
-    fct = ConfigBlaster(in_args.host, in_args.port, in_args.cycles,
-                        in_args.threads, in_args.requests)
-
-    # Run through <cycles>, where <threads> are started in each cycle and
-    # <entries> are added from each thread
-    fct.add_blaster()
-
-    print "    Successful reads:  {0}\n".format(fct.get_ok_rqsts)