CSIT-704: Add ACL IP4BASE perf tests

Change-Id: I1fada28f2855534faf3b3051a3efe1cbb4dcdd03
Signed-off-by: Jan Gelety <jgelety@cisco.com>

5 files changed, 107 insertions, 42 deletions

diff --git a/resources/libraries/robot/performance/performance_configuration.robot b/resources/libraries/robot/performance/performance_configuration.robot
index adf233d4ba..4d0e53f896 100644
--- a/resources/libraries/robot/performance/performance_configuration.robot
+++ b/resources/libraries/robot/performance/performance_configuration.robot
@@ -21,6 +21,7 @@
 | Library | resources.libraries.python.VhostUser
 | Library | resources.libraries.python.TrafficGenerator
 | Library | resources.libraries.python.TrafficGenerator.TGDropRateSearchImpl
+| Library | resources.libraries.python.Classify
 | Resource | resources/libraries/robot/shared/default.robot
 | Resource | resources/libraries/robot/shared/interfaces.robot
 | Resource | resources/libraries/robot/shared/counters.robot
@@ -851,6 +852,48 @@
 | | All Vpp Interfaces Ready Wait | ${nodes}
 | | Configure IPv4 ACLs | ${dut1} | ${dut1_if1} | ${dut1_if2}
 
+| Initialize IPv4 routing for '${ip_nr}' addresses with IPv4 ACLs on DUT1 in 3-node circular topology
+| | [Documentation]
+| | ... | Set UP state on VPP interfaces in path on nodes in 3-node circular
+| | ... | topology. Get the interface MAC addresses and setup ARP on all VPP
+| | ... | interfaces. Setup IPv4 addresses with /24 prefix on DUT-TG links and
+| | ... | /30 prefix on DUT1-DUT2 link. Set routing on both DUT nodes with
+| | ... | prefix /24 and next hops of neighbour DUT interface IPv4 address.
+| | ... | Apply required ACL rules to DUT1 interfaces.
+| | ...
+| | ... | _NOTE:_ This KW uses following test case variables:
+| | ... | - ${dut1} - DUT1 node.
+| | ... | - ${dut2} - DUT2 node.
+| | ... | - ${dut1_if1} - DUT1 interface towards TG.
+| | ... | - ${dut1_if2} - DUT1 interface towards DUT2.
+| | ... | - ${dut2_if1} - DUT2 interface towards DUT1.
+| | ... | - ${dut2_if2} - DUT2 interface towards TG.
+| | ...
+| | Set Interface State | ${dut1} | ${dut1_if1} | up
+| | Set Interface State | ${dut1} | ${dut1_if2} | up
+| | Set Interface State | ${dut2} | ${dut2_if1} | up
+| | Set Interface State | ${dut2} | ${dut2_if2} | up
+| | ${tg1_if1_mac}= | Get Interface MAC | ${tg} | ${tg_if1}
+| | ${tg1_if2_mac}= | Get Interface MAC | ${tg} | ${tg_if2}
+| | ${dut1_if2_mac}= | Get Interface MAC | ${dut1} | ${dut1_if2}
+| | ${dut2_if1_mac}= | Get Interface MAC | ${dut2} | ${dut2_if1}
+| | :FOR | ${number} | IN RANGE | 2 | ${ip_nr}+2
+| | | Add arp on dut | ${dut1} | ${dut1_if1} | 10.10.10.${number}
+| | | ... | ${tg1_if1_mac}
+| | | Add arp on dut | ${dut2} | ${dut2_if2} | 20.20.20.${number}
+| | | ... | ${tg1_if2_mac}
+| | Add arp on dut | ${dut1} | ${dut1_if2} | 1.1.1.2 | ${dut2_if1_mac}
+| | Add arp on dut | ${dut2} | ${dut2_if1} | 1.1.1.1 | ${dut1_if2_mac}
+| | Configure IP addresses on interfaces
+| | ... | ${dut1} | ${dut1_if1} | 10.10.10.1 | 24
+| | ... | ${dut1} | ${dut1_if2} | 1.1.1.1 | 30
+| | ... | ${dut2} | ${dut2_if1} | 1.1.1.2 | 30
+| | ... | ${dut2} | ${dut2_if2} | 20.20.20.1 | 24
+| | Vpp Route Add | ${dut1} | 20.20.20.0 | 24 | 1.1.1.2 | ${dut1_if2}
+| | Vpp Route Add | ${dut2} | 10.10.10.0 | 24 | 1.1.1.1 | ${dut2_if1}
+| | All Vpp Interfaces Ready Wait | ${nodes}
+| | Configure IPv4 ACLs | ${dut1} | ${dut1_if1} | ${dut1_if2}
+
 | Initialize L2 bridge domains with Vhost-User in 3-node circular topology
 | | [Documentation]
 | | ... | Create two Vhost-User interfaces on all defined VPP nodes. Add each
diff --git a/resources/libraries/robot/performance/performance_setup.robot b/resources/libraries/robot/performance/performance_setup.robot
index de50fd3254..6e46e3bc0d 100644
--- a/resources/libraries/robot/performance/performance_setup.robot
+++ b/resources/libraries/robot/performance/performance_setup.robot
@@ -531,16 +531,38 @@
 | | ... | *Arguments:*
 | | ... | - rate - Rate for sending packets. Type: string
 | | ... | - framesize - L2 Frame Size [B]. Type: integer
-| | ... | - topology_type - Topology type. Type: string
+| | ... | - traffic_profile - Traffic profile. Type: string
 | | ...
 | | ... | *Example:*
 | | ...
-| | ... | \| Tear down performance discovery test with SNAT \| 4.0mpps \| 64 \
+| | ... | \| Tear down performance discovery test with SNAT \| 100000pps \| 64 \
 | | ... | \| ${traffic_profile} \|
 | | ...
 | | [Arguments] | ${rate} | ${framesize} | ${traffic_profile}
 | | ...
-| | Tear down performance discovery test | ${rate}pps | ${framesize}
+| | Tear down performance discovery test | ${rate} | ${framesize}
 | | ... | ${traffic_profile}
 | | Show SNAT verbose | ${dut1}
 | | Show SNAT verbose | ${dut2}
+
+| Tear down performance test with ACL
+| | [Documentation] | Common test teardown for ndrdisc and pdrdisc performance \
+| | ... | tests with ACL feature used.
+| | ...
+| | ... | *Arguments:*
+| | ... | - rate - Rate for sending packets. Type: string
+| | ... | - framesize - L2 Frame Size [B]. Type: integer
+| | ... | - traffic_profile - Traffic profile. Type: string
+| | ...
+| | ... | *Example:*
+| | ...
+| | ... | \| Tear down performance test with ACL \| 100000pps \| 64 \
+| | ... | \| ${traffic_profile} \|
+| | ...
+| | [Arguments] | ${rate} | ${framesize} | ${traffic_profile}
+| | ...
+| | Tear down performance discovery test | ${rate} | ${framesize}
+| ... | ${traffic_profile}
+| | Vpp Log Plugin Acl Settings | ${dut1}
+| | Run Keyword And Ignore Error | Vpp Log Plugin Acl Interface Assignment
+| ... | ${dut1}
diff --git a/resources/traffic_profiles/trex/trex-sl-3n-ethip4udp-100u1000p-conc.py b/resources/traffic_profiles/trex/trex-sl-3n-ethip4udp-100u1000p-conc.py
index 2f8b782ca6..02d9cda075 100755
--- a/resources/traffic_profiles/trex/trex-sl-3n-ethip4udp-100u1000p-conc.py
+++ b/resources/traffic_profiles/trex/trex-sl-3n-ethip4udp-100u1000p-conc.py
@@ -17,13 +17,13 @@ Stream profile:
  - Two streams sent in directions 0 --> 1 and 1 --> 0 at the same time.
  - Packet: ETH / IP / UDP
  - Direction 0 --> 1:
-   - Source IP address range:      10.10.10.0 - 10.10.10.99
-   - Destination IP address range: 20.20.20.0 - 20.20.20.99
+   - Source IP address range:      10.10.10.2 - 10.10.10.101
+   - Destination IP address range: 20.20.20.2 - 20.20.20.101
    - Source UDP port range:        1001 - 2000
    - Destination UDP port range:   2001 - 3000
  - Direction 1 --> 0:
-   - Source IP address range:      20.20.20.0 - 20.20.20.99
-   - Destination IP address range: 10.10.10.0 - 10.10.10.99
+   - Source IP address range:      20.20.20.2 - 20.20.20.101
+   - Destination IP address range: 10.10.10.2 - 10.10.10.101
    - Source UDP port range:        2001-3000
    - Destination UDP port range:   1001 - 2000
 """
@@ -41,15 +41,15 @@ class TrafficStreams(TrafficStreamsBaseClass):
         super(TrafficStreamsBaseClass, self).__init__()
 
         # IPs used in packet headers.
-        self.p1_src_start_ip = '10.10.10.0'
-        self.p1_src_end_ip = '10.10.10.99'
-        self.p1_dst_start_ip = '20.20.20.0'
-        self.p1_dst_end_ip = '20.20.20.99'
-
-        self.p2_src_start_ip = '20.20.20.0'
-        self.p2_src_end_ip = '20.20.20.99'
-        self.p2_dst_start_ip = '10.10.10.0'
-        self.p2_dst_end_ip = '10.10.10.99'
+        self.p1_src_start_ip = '10.10.10.2'
+        self.p1_src_end_ip = '10.10.10.101'
+        self.p1_dst_start_ip = '20.20.20.2'
+        self.p1_dst_end_ip = '20.20.20.101'
+
+        self.p2_src_start_ip = '20.20.20.2'
+        self.p2_src_end_ip = '20.20.20.101'
+        self.p2_dst_start_ip = '10.10.10.2'
+        self.p2_dst_end_ip = '10.10.10.101'
 
         # UDP ports used in packet headers.
         self.p1_src_start_udp_port = 1001
diff --git a/resources/traffic_profiles/trex/trex-sl-3n-ethip4udp-10u1000p-conc.py b/resources/traffic_profiles/trex/trex-sl-3n-ethip4udp-10u1000p-conc.py
index b0362aedcd..847eccdf0a 100755
--- a/resources/traffic_profiles/trex/trex-sl-3n-ethip4udp-10u1000p-conc.py
+++ b/resources/traffic_profiles/trex/trex-sl-3n-ethip4udp-10u1000p-conc.py
@@ -17,13 +17,13 @@ Stream profile:
  - Two streams sent in directions 0 --> 1 and 1 --> 0 at the same time.
  - Packet: ETH / IP / UDP
  - Direction 0 --> 1:
-   - Source IP address range:      10.10.10.0 - 10.10.10.9
-   - Destination IP address range: 20.20.20.0 - 20.20.20.9
+   - Source IP address range:      10.10.10.2 - 10.10.10.11
+   - Destination IP address range: 20.20.20.2 - 20.20.20.11
    - Source UDP port range:        1001 - 2000
    - Destination UDP port range:   2001 - 3000
  - Direction 1 --> 0:
-   - Source IP address range:      20.20.20.0 - 20.20.20.9
-   - Destination IP address range: 10.10.10.0 - 10.10.10.9
+   - Source IP address range:      20.20.20.2 - 20.20.20.11
+   - Destination IP address range: 10.10.10.2 - 10.10.10.11
    - Source UDP port range:        2001-3000
    - Destination UDP port range:   1001 - 2000
 """
@@ -41,15 +41,15 @@ class TrafficStreams(TrafficStreamsBaseClass):
         super(TrafficStreamsBaseClass, self).__init__()
 
         # IPs used in packet headers.
-        self.p1_src_start_ip = '10.10.10.0'
-        self.p1_src_end_ip = '10.10.10.9'
-        self.p1_dst_start_ip = '20.20.20.0'
-        self.p1_dst_end_ip = '20.20.20.9'
-
-        self.p2_src_start_ip = '20.20.20.0'
-        self.p2_src_end_ip = '20.20.20.9'
-        self.p2_dst_start_ip = '10.10.10.0'
-        self.p2_dst_end_ip = '10.10.10.9'
+        self.p1_src_start_ip = '10.10.10.2'
+        self.p1_src_end_ip = '10.10.10.11'
+        self.p1_dst_start_ip = '20.20.20.2'
+        self.p1_dst_end_ip = '20.20.20.11'
+
+        self.p2_src_start_ip = '20.20.20.2'
+        self.p2_src_end_ip = '20.20.20.11'
+        self.p2_dst_start_ip = '10.10.10.2'
+        self.p2_dst_end_ip = '10.10.10.11'
 
         # UDP ports used in packet headers.
         self.p1_src_start_udp_port = 1001
diff --git a/resources/traffic_profiles/trex/trex-sl-3n-ethip4udp-10u10p-conc.py b/resources/traffic_profiles/trex/trex-sl-3n-ethip4udp-10u10p-conc.py
index 76ccb53259..81d113350b 100755
--- a/resources/traffic_profiles/trex/trex-sl-3n-ethip4udp-10u10p-conc.py
+++ b/resources/traffic_profiles/trex/trex-sl-3n-ethip4udp-10u10p-conc.py
@@ -17,13 +17,13 @@ Stream profile:
  - Two streams sent in directions 0 --> 1 and 1 --> 0 at the same time.
  - Packet: ETH / IP / UDP
  - Direction 0 --> 1:
-   - Source IP address range:      10.10.10.0 - 10.10.10.9
-   - Destination IP address range: 20.20.20.0 - 20.20.20.9
+   - Source IP address range:      10.10.10.2 - 10.10.10.11
+   - Destination IP address range: 20.20.20.2 - 20.20.2011
    - Source UDP port range:        1001 - 1010
    - Destination UDP port range:   2001 - 2010
  - Direction 1 --> 0:
-   - Source IP address range:      20.20.20.0 - 20.20.20.9
-   - Destination IP address range: 10.10.10.0 - 10.10.10.9
+   - Source IP address range:      20.20.20.2 - 20.20.20.11
+   - Destination IP address range: 10.10.10.2 - 10.10.10.11
    - Source UDP port range:        2001-2010
    - Destination UDP port range:   1001 - 1010
 """
@@ -41,15 +41,15 @@ class TrafficStreams(TrafficStreamsBaseClass):
         super(TrafficStreamsBaseClass, self).__init__()
 
         # IPs used in packet headers.
-        self.p1_src_start_ip = '10.10.10.0'
-        self.p1_src_end_ip = '10.10.10.9'
-        self.p1_dst_start_ip = '20.20.20.0'
-        self.p1_dst_end_ip = '20.20.20.9'
-
-        self.p2_src_start_ip = '20.20.20.0'
-        self.p2_src_end_ip = '20.20.20.9'
-        self.p2_dst_start_ip = '10.10.10.0'
-        self.p2_dst_end_ip = '10.10.10.9'
+        self.p1_src_start_ip = '10.10.10.2'
+        self.p1_src_end_ip = '10.10.10.11'
+        self.p1_dst_start_ip = '20.20.20.2'
+        self.p1_dst_end_ip = '20.20.20.11'
+
+        self.p2_src_start_ip = '20.20.20.2'
+        self.p2_src_end_ip = '20.20.20.11'
+        self.p2_dst_start_ip = '10.10.10.2'
+        self.p2_dst_end_ip = '10.10.10.11'
 
         # UDP ports used in packet headers.
         self.p1_src_start_udp_port = 1001