CSIT-1165 Create DPDK tests for 2-node topology

Create DPDK tests for 2-node topology
- x710, xxv710 only
- l3fwd, testpmd
- standard pkt.size group

Change-Id: I2fbf6c38a427775da9b289faaa8fe1b8c03d5527
Signed-off-by: Peter Mikus <pmikus@cisco.com>

1 files changed, 119 insertions, 0 deletions

diff --git a/tests/dpdk/perf/2n1l-10ge2p1x710-ethip4-ip4base-l3fwd-mrr.robot b/tests/dpdk/perf/2n1l-10ge2p1x710-ethip4-ip4base-l3fwd-mrr.robot
new file mode 100644
index 0000000000..cf9df30fa3
--- /dev/null
+++ b/tests/dpdk/perf/2n1l-10ge2p1x710-ethip4-ip4base-l3fwd-mrr.robot
@@ -0,0 +1,119 @@
+# Copyright (c) 2018 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/performance/performance_setup.robot
+| Resource | resources/libraries/robot/dpdk/default.robot
+| Library | resources.libraries.python.topology.Topology
+| Library | resources.libraries.python.NodePath
+| Library | resources.libraries.python.InterfaceUtil
+| Library | resources.libraries.python.DPDK.DPDKTools
+| ...
+| Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | MRR | 1NUMA
+| ... | NIC_Intel-X710 | DPDK | IP4FWD | BASE | ETH
+| ...
+| Suite Setup | Set up DPDK 2-node performance topology with DUT's NIC model
+| ... | L3 | Intel-X710
+| Suite Teardown | Tear down DPDK 2-node performance topology
+| ...
+| Test template | Local template
+| ...
+| Documentation | *Raw results IPv4 routing test cases*
+| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 2-node circular topology\
+| ... | with single links between nodes.
+| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L3 IPv4 routing.
+| ... | *[Cfg] DUT configuration:* DUT1 run the DPDK l3fwd application\
+| ... | DUT1 tested with 2p10GE NIC X710 Niantic by Intel.
+| ... | *[Ver] TG verification:* In MaxReceivedRate test TG sends traffic\
+| ... | at line rate and reports total received/sent packets over trial period.\
+| ... | Test packets are generated by TG on\
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\
+| ... | (flow-group per direction, 253 flows per flow-group) with all packets\
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static\
+| ... | payload. MAC addresses are matching MAC addresses of the TG node\
+| ... | interfaces.
+
+*** Variables ***
+# X710-DA2 bandwidth limit
+| ${s_limit}= | ${10000000000}
+# Traffic profile:
+| ${traffic_profile}= | trex-sl-3n-ethip4-ip4dst253_l3fwd
+
+*** Keywords ***
+| Local template
+| | [Documentation]
+| | ... | [Cfg] DUT runs L3 IPv4 routing config.\
+| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
+| | ... | [Ver] Measure MaxReceivedRate for ${framesize} frames using single\
+| | ... | trial throughput test.
+| | ...
+| | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None}
+| | ...
+| | Set Test Variable | ${framesize}
+| | ${get_framesize}= | Get Frame Size | ${framesize}
+| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize}
+| | ${jumbo_frames}= | Set Variable If
+| | ... | ${get_framesize} < ${1522} | ${False} | ${True}
+| | ...
+| | Given Start L3FWD on all DUTs | ${phy_cores} | ${rxq} | ${jumbo_frames}
+| | Then Traffic should pass with maximum rate
+| | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
+
+*** Test Cases ***
+| tc01-64B-1t1c-ethip4-ip4base-l3fwd-mrr
+| | [Tags] | 64B | 1C
+| | framesize=${64} | phy_cores=${1}
+
+| tc02-1518B-1t1c-ethip4-ip4base-l3fwd-mrr
+| | [Tags] | 1518B | 1C
+| | framesize=${1518} | phy_cores=${1}
+
+| tc03-9000B-1t1c-ethip4-ip4base-l3fwd-mrr
+| | [Tags] | 9000B | 1C
+| | framesize=${9000} | phy_cores=${1}
+
+| tc04-IMIX-1t1c-ethip4-ip4base-l3fwd-mrr
+| | [Tags] | IMIX | 1C
+| | framesize=IMIX_v4_1 | phy_cores=${1}
+
+| tc05-64B-2t2c-ethip4-ip4base-l3fwd-mrr
+| | [Tags] | 64B | 2C
+| | framesize=${64} | phy_cores=${2}
+
+| tc06-1518B-2t2c-ethip4-ip4base-l3fwd-mrr
+| | [Tags] | 1518B | 2C
+| | framesize=${1518} | phy_cores=${2}
+
+| tc07-9000B-2t2c-ethip4-ip4base-l3fwd-mrr
+| | [Tags] | 9000B | 2C
+| | framesize=${9000} | phy_cores=${2}
+
+| tc08-IMIX-2t2c-ethip4-ip4base-l3fwd-mrr
+| | [Tags] | IMIX | 2C
+| | framesize=IMIX_v4_1 | phy_cores=${2}
+
+| tc09-64B-4t4c-ethip4-ip4base-l3fwd-mrr
+| | [Tags] | 64B | 4C
+| | framesize=${64} | phy_cores=${4}
+
+| tc10-1518B-4t4c-ethip4-ip4base-l3fwd-mrr
+| | [Tags] | 1518B | 4C
+| | framesize=${1518} | phy_cores=${4}
+
+| tc11-9000B-4t4c-ethip4-ip4base-l3fwd-mrr
+| | [Tags] | 9000B | 4C
+| | framesize=${9000} | phy_cores=${4}
+
+| tc12-IMIX-4t4c-ethip4-ip4base-l3fwd-mrr
+| | [Tags] | IMIX | 4C
+| | framesize=IMIX_v4_1 | phy_cores=${4}