csit-func-tc-naming-change - phase 1

- change of ts directories
- change of ts file names
- splitting of former files to more files when suitable
- more details:
  https://wiki.fd.io/view/CSIT/csit-perf-tc-naming-change

Change-Id: Ifda1038f8323735f86c1be7ba7f93e3fda183618
Signed-off-by: Jan Gelety <jgelety@cisco.com>

1 files changed, 0 insertions, 374 deletions

diff --git a/tests/func/bridge_domain/bridge_domain_untagged.robot b/tests/func/bridge_domain/bridge_domain_untagged.robot
deleted file mode 100644
index 346ce86c92..0000000000
--- a/tests/func/bridge_domain/bridge_domain_untagged.robot
+++ /dev/null
@@ -1,374 +0,0 @@
-# Copyright (c) 2016 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Resource | resources/libraries/robot/default.robot
-| Resource | resources/libraries/robot/bridge_domain.robot
-| Resource | resources/libraries/robot/testing_path.robot
-| Resource | resources/libraries/robot/qemu.robot
-| Library  | resources.libraries.python.Trace
-| Force Tags | HW_ENV | VM_ENV
-| Test Setup | Func Test Setup
-| Test Teardown | Func Test Teardown
-| Documentation | *L2 bridge-domain test cases*
-| ...
-| ... | *[Top] Network Topologies:* TG=DUT1 2-node topology with two links
-| ... | between nodes; TG-DUT1-DUT2-TG 3-node circular topology with
-| ... | single links between nodes; TG=DUT1=DUT2=TG 3-node circular
-| ... | topology with double parallel links and TG=DUT=VM 3-node topology
-| ... | with VM and double parallel links.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-ICMPv4 for L2 switching of
-| ... | IPv4; Eth-IPv6-ICMPv6 for L2 switching of IPv6 use. Both apply
-| ... | to all links.
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2
-| ... | bridge-domain (L2BD) switching combined with static MACs; MAC
-| ... | learning enabled and Split Horizon Groups (SHG) depending on
-| ... | test case.
-| ... | *[Ver] TG verification:* Test ICMPv4 (or ICMPv6) Echo Request packets
-| ... | are sent in both directions by TG on links to DUT1 and DUT2; on
-| ... | receive TG verifies packets for correctness and their IPv4 (IPv6)
-| ... | src-addr, dst-addr and MAC addresses.
-| ... | *[Ref] Applicable standard specifications:*
-
-*** Variables ***
-| ${bd_id1}= | 1
-| ${bd_id2}= | 2
-| ${shg1}= | 3
-| ${shg2}= | 4
-| ${sock1}= | /tmp/sock1
-| ${sock2}= | /tmp/sock2
-
-*** Test Cases ***
-| TC01: DUT reports active interfaces
-| | [Documentation]
-| | ... | [Top] TG=DUT1; TG-DUT1-DUT2-TG. [Enc] None. [Cfg] Discovered \
-| | ... | active interfaces. [Ver] Report active interfaces on DUT. [Ref]
-| | [Tags] | 3_NODE_DOUBLE_LINK_TOPO | 3_NODE_SINGLE_LINK_TOPO
-| | VPP reports interfaces on | ${nodes['DUT1']}
-
-| TC02: DUT with L2BD (MAC learning) switch ICMPv4 between two TG links
-| | [Documentation]
-| | ... | [Top] TG=DUT1. [Enc] Eth-IPv4-ICMPv4. [Cfg] On DUT1 configure \
-| | ... | two i/fs into L2BD with MAC learning. [Ver] Make TG verify
-| | ... | ICMPv4 Echo Req pkts are switched thru DUT1 in both directions
-| | ... | and are correct on receive. [Ref]
-| | [Tags] | 3_NODE_DOUBLE_LINK_TOPO
-| | Given Path for 2-node testing is set
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']}
-| | And Interfaces in 2-node path are up
-| | When Bridge domain on DUT node is created | ${dut_node} | ${bd_id1}
-| | And Interface is added to bridge domain | ${dut_node} | ${dut_to_tg_if1}
-| | ...                                     | ${bd_id1}
-| | And Interface is added to bridge domain | ${dut_node} | ${dut_to_tg_if2}
-| | ...                                     | ${bd_id1}
-| | Then Send and receive ICMPv4 bidirectionally | ${tg_node} | ${tg_to_dut_if1}
-| | ...                                     | ${tg_to_dut_if2}
-
-| TC03: DUT1 and DUT2 with L2BD (MAC learning) switch between two TG links
-| | [Documentation]
-| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-IPv4-ICMPv4. [Cfg] On DUT1 and DUT2 \
-| | ... | configure two i/fs into L2BD with MAC learning. [Ver] Make TG
-| | ... | verify ICMPv4 Echo Req pkts are switched thru DUT1 and DUT2 in
-| | ... | both directions and are correct on receive. [Ref]
-| | [Tags] | 3_NODE_SINGLE_LINK_TOPO
-| | Given Path for 3-node testing is set
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
-| | And Interfaces in 3-node path are up
-| | When Bridge domain on DUT node is created | ${dut1_node} | ${bd_id1}
-| | And Interface is added to bridge domain | ${dut1_node} | ${dut1_to_tg}
-| | ...                                     | ${bd_id1}
-| | And Interface is added to bridge domain | ${dut1_node} | ${dut1_to_dut2}
-| | ...                                     | ${bd_id1}
-| | And Bridge domain on DUT node is created | ${dut2_node} | ${bd_id2}
-| | And Interface is added to bridge domain | ${dut2_node} | ${dut2_to_tg}
-| | ...                                     | ${bd_id2}
-| | And Interface is added to bridge domain | ${dut2_node} | ${dut2_to_dut1}
-| | ...                                     | ${bd_id2}
-| | Then Send and receive ICMPv4 bidirectionally | ${tg_node} | ${tg_to_dut1}
-| | ...                                          | ${tg_to_dut2}
-
-| TC04: DUT1 and DUT2 with L2BD (static MACs) switch between two TG links
-| | [Documentation]
-| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-IPv4-ICMPv4. [Cfg] On DUT1 and \
-| | ... | DUT2 configure two i/fs into L2BD with static MACs. [Ver] Make
-| | ... | TG verify ICMPv4 Echo Req pkts are switched thru DUT1 and DUT2
-| | ... | in both directions and are correct on receive. [Ref]
-| | [Tags] | 3_NODE_SINGLE_LINK_TOPO
-| | Given Path for 3-node testing is set
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
-| | And Interfaces in 3-node path are up
-| | When Bridge domain on DUT node is created | ${dut1_node} | ${bd_id1}
-| | ...                                       | learn=${FALSE}
-| | And Interface is added to bridge domain | ${dut1_node} | ${dut1_to_tg}
-| | ...                                     | ${bd_id1}
-| | And Interface is added to bridge domain | ${dut1_node} | ${dut1_to_dut2}
-| | ...                                     | ${bd_id1}
-| | And Destination port is added to L2FIB on DUT node | ${tg_node}
-| | ...                                                | ${tg_to_dut1}
-| | ...                                                | ${dut1_node}
-| | ...                                                | ${dut1_to_tg}
-| | ...                                                | ${bd_id1}
-| | And Destination port is added to L2FIB on DUT node | ${tg_node}
-| | ...                                                | ${tg_to_dut2}
-| | ...                                                | ${dut1_node}
-| | ...                                                | ${dut1_to_dut2}
-| | ...                                                | ${bd_id1}
-| | And Bridge domain on DUT node is created | ${dut2_node} | ${bd_id2}
-| | ...                                      | learn=${FALSE}
-| | And Interface is added to bridge domain | ${dut2_node} | ${dut2_to_tg}
-| | ...                                     | ${bd_id2}
-| | And Interface is added to bridge domain | ${dut2_node} | ${dut2_to_dut1}
-| | ...                                     | ${bd_id2}
-| | And Destination port is added to L2FIB on DUT node | ${tg_node}
-| | ...                                                | ${tg_to_dut1}
-| | ...                                                | ${dut2_node}
-| | ...                                                | ${dut2_to_dut1}
-| | ...                                                | ${bd_id2}
-| | And Destination port is added to L2FIB on DUT node | ${tg_node}
-| | ...                                                | ${tg_to_dut2}
-| | ...                                                | ${dut2_node}
-| | ...                                                | ${dut2_to_tg}
-| | ...                                                | ${bd_id2}
-| | Then Send and receive ICMPv4 bidirectionally | ${tg_node} | ${tg_to_dut1}
-| | ...                                          | ${tg_to_dut2}
-
-| TC05: DUT1 and DUT2 with L2BD (MAC learn) and SHG switch between four TG links
-| | [Documentation]
-| | ... | [Top] TG=DUT1=DUT2=TG. [Enc] Eth-IPv4-ICMPv4. [Cfg] On DUT1 and \
-| | ... | DUT2 configure four i/fs into L2BD with MAC learning and the
-| | ... | same SHG on i/fs towards TG. [Ver] Make TG verify ICMPv4 Echo
-| | ... | Req pkts are switched thru DUT1 and DUT2 in both directions and
-| | ... | are correct on receive; verify no pkts are switched thru SHG
-| | ... | isolated interfaces. [Ref]
-| | [Tags] | 3_NODE_DOUBLE_LINK_TOPO
-| | Given Path for 3-node BD-SHG testing is set | ${nodes['TG']}
-| | ...                                         | ${nodes['DUT1']}
-| | ...                                         | ${nodes['DUT2']}
-| | And Interfaces in 3-node BD-SHG testing are up
-| | When Bridge domain on DUT node is created | ${dut1_node} | ${bd_id1}
-| | And Interface is added to bridge domain | ${dut1_node} | ${dut1_to_tg_if1}
-| | ...                                     | ${bd_id1} | ${shg1}
-| | And Interface is added to bridge domain | ${dut1_node} | ${dut1_to_tg_if2}
-| | ...                                     | ${bd_id1} | ${shg1}
-| | And Interface is added to bridge domain | ${dut1_node} | ${dut1_to_dut2}
-| | ...                                     | ${bd_id1}
-| | And Bridge domain on DUT node is created | ${dut2_node} | ${bd_id2}
-| | And Interface is added to bridge domain | ${dut2_node} | ${dut2_to_tg_if1}
-| | ...                                     | ${bd_id2} | ${shg2}
-| | And Interface is added to bridge domain | ${dut2_node} | ${dut2_to_tg_if2}
-| | ...                                     | ${bd_id2} | ${shg2}
-| | And Interface is added to bridge domain | ${dut2_node} | ${dut2_to_dut1}
-| | ...                                     | ${bd_id2}
-| | Then Send and receive ICMPv4 bidirectionally | ${tg_node}
-| | ...                                          | ${tg_to_dut1_if1}
-| | ...                                          | ${tg_to_dut2_if1}
-| | And Send and receive ICMPv4 bidirectionally | ${tg_node}
-| | ...                                         | ${tg_to_dut1_if1}
-| | ...                                         | ${tg_to_dut2_if2}
-| | And Send and receive ICMPv4 bidirectionally | ${tg_node}
-| | ...                                         | ${tg_to_dut1_if2}
-| | ...                                         | ${tg_to_dut2_if1}
-| | And Send and receive ICMPv4 bidirectionally | ${tg_node}
-| | ...                                         | ${tg_to_dut1_if2}
-| | ...                                         | ${tg_to_dut2_if2}
-| | And Run Keyword And Expect Error | ICMP echo Rx timeout
-| | ...                              | Send and receive ICMPv4 bidirectionally
-| | | ...                            | ${tg_node} | ${tg_to_dut1_if1}
-| | | ...                            | ${tg_to_dut1_if2}
-| | And Run Keyword And Expect Error | ICMP echo Rx timeout
-| | ...                              | Send and receive ICMPv4 bidirectionally
-| | | ...                            | ${tg_node} | ${tg_to_dut2_if1}
-| | | ...                            | ${tg_to_dut2_if2}
-
-| TC06: DUT with two L2BDs (MAC learn) switches ICMPv4 between TG and VM links
-| | [Documentation]
-| | ... | [Top] TG=DUT=VM. [Enc] Eth-IPv4-ICMPv4. [Cfg] On DUT1 configure \
-| | ... | two L2BDs with MAC learning, each with vhost-user i/f to local
-| | ... | VM and i/f to TG; configure VM to loop pkts back betwen its two
-| | ... | virtio i/fs. [Ver] Make TG verify ICMPv4 Echo Req pkts are
-| | ... | switched thru DUT1 and VM in both directions and are correct on
-| | ... | receive. [Ref]
-| | [Tags] | 3_NODE_DOUBLE_LINK_TOPO | VPP_VM_ENV
-| | Given Path for 2-node testing is set
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']}
-| | And Interfaces in 2-node path are up
-| | When VPP Vhost interfaces for L2BD forwarding are setup | ${dut_node}
-| | ...                                                     | ${sock1}
-| | ...                                                     | ${sock2}
-| | And Bridge domain on DUT node is created | ${dut_node} | ${bd_id1}
-| | And Interface is added to bridge domain | ${dut_node} | ${dut_to_tg_if1}
-| | ...                                     | ${bd_id1}
-| | And Interface is added to bridge domain | ${dut_node} | ${vhost_if1}
-| | ...                                     | ${bd_id1}
-| | And Bridge domain on DUT node is created | ${dut_node} | ${bd_id2}
-| | And Interface is added to bridge domain | ${dut_node} | ${dut_to_tg_if2}
-| | ...                                     | ${bd_id2}
-| | And Interface is added to bridge domain | ${dut_node} | ${vhost_if2}
-| | ...                                     | ${bd_id2}
-| | And VM for Vhost L2BD forwarding is setup | ${dut_node} | ${sock1}
-| | ...                                       | ${sock2}
-| | Then Send and receive ICMPv4 bidirectionally | ${tg_node} | ${tg_to_dut_if1}
-| | ...                                          | ${tg_to_dut_if2}
-| | [Teardown] | Run Keywords | Show Packet Trace on All DUTs | ${nodes}
-| | ... | AND | Show vpp trace dump on all DUTs
-| | ... | AND | Stop and Clear QEMU | ${dut_node} | ${vm_node}
-| | ... | AND | Check VPP PID in Teardown
-
-| TC07: DUT with two L2BDs (MAC learn) switches ICMPv6 between TG and VM links
-| | [Documentation]
-| | ... | [Top] TG=DUT=VM. [Enc] Eth-IPv6-ICMPv6. [Cfg] On DUT1 configure \
-| | ... | two L2BDs with MAC learning, each with vhost-user i/f to local
-| | ... | VM and i/f to TG; configure VM to loop pkts back betwen its two
-| | ... | virtio i/fs. [Ver] Make TG verify ICMPv6 Echo Req pkts are
-| | ... | switched thru DUT1 and VM in both directions and are correct on
-| | ... | receive. [Ref]
-| | [Tags] | 3_NODE_DOUBLE_LINK_TOPO | VPP_VM_ENV
-| | Given Path for 2-node testing is set
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']}
-| | And Interfaces in 2-node path are up
-| | When VPP Vhost interfaces for L2BD forwarding are setup | ${dut_node}
-| | ...                                                     | ${sock1}
-| | ...                                                     | ${sock2}
-| | And Bridge domain on DUT node is created | ${dut_node} | ${bd_id1}
-| | And Interface is added to bridge domain | ${dut_node} | ${dut_to_tg_if1}
-| | ...                                     | ${bd_id1}
-| | And Interface is added to bridge domain | ${dut_node} | ${vhost_if1}
-| | ...                                     | ${bd_id1}
-| | And Bridge domain on DUT node is created | ${dut_node} | ${bd_id2}
-| | And Interface is added to bridge domain | ${dut_node} | ${dut_to_tg_if2}
-| | ...                                     | ${bd_id2}
-| | And Interface is added to bridge domain | ${dut_node} | ${vhost_if2}
-| | ...                                     | ${bd_id2}
-| | And VM for Vhost L2BD forwarding is setup | ${dut_node} | ${sock1}
-| | ...                                       | ${sock2}
-| | Then Send and receive ICMPv6 bidirectionally | ${tg_node} | ${tg_to_dut_if1}
-| | ...                                          | ${tg_to_dut_if2}
-| | [Teardown] | Run Keywords | Show Packet Trace on All DUTs | ${nodes}
-| | ... | AND | Show vpp trace dump on all DUTs
-| | ... | AND | Stop and Clear QEMU | ${dut_node} | ${vm_node}
-| | ... | AND | Check VPP PID in Teardown
-
-| TC08: DUT with two L2BDs (static MACs) switches ICMPv4 between TG and VM links
-| | [Documentation]
-| | ... | [Top] TG=DUT=VM. [Enc] Eth-IPv4-ICMPv4. [Cfg] On DUT1 configure \
-| | ... | two L2BDs with static MACs, each with vhost-user i/f to local VM
-| | ... | and i/f to TG; configure VM to loop pkts back betwen its two
-| | ... | virtio i/fs. [Ver] Make TG verify ICMPv4 Echo Req pkts are
-| | ... | switched thru DUT1 and VM in both directions and are correct on
-| | ... | receive. [Ref]
-| | [Tags] | 3_NODE_DOUBLE_LINK_TOPO | VPP_VM_ENV
-| | Given Path for 2-node testing is set
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']}
-| | And Interfaces in 2-node path are up
-| | When VPP Vhost interfaces for L2BD forwarding are setup | ${dut_node}
-| | ...                                                     | ${sock1}
-| | ...                                                     | ${sock2}
-| | And Bridge domain on DUT node is created | ${dut_node} | ${bd_id1}
-| | ...                                      | learn=${FALSE}
-| | And Interface is added to bridge domain | ${dut_node} | ${dut_to_tg_if1}
-| | ...                                     | ${bd_id1}
-| | And Interface is added to bridge domain | ${dut_node} | ${vhost_if1}
-| | ...                                     | ${bd_id1}
-| | And Destination port is added to L2FIB on DUT node | ${tg_node}
-| | ...                                                | ${tg_to_dut_if1}
-| | ...                                                | ${dut_node}
-| | ...                                                | ${dut_to_tg_if1}
-| | ...                                                | ${bd_id1}
-| | And Destination port is added to L2FIB on DUT node | ${tg_node}
-| | ...                                                | ${tg_to_dut_if2}
-| | ...                                                | ${dut_node}
-| | ...                                                | ${vhost_if1}
-| | ...                                                | ${bd_id1}
-| | And Bridge domain on DUT node is created | ${dut_node} | ${bd_id2}
-| | ...                                      | learn=${FALSE}
-| | And Interface is added to bridge domain | ${dut_node} | ${dut_to_tg_if2}
-| | ...                                     | ${bd_id2}
-| | And Interface is added to bridge domain | ${dut_node} | ${vhost_if2}
-| | ...                                     | ${bd_id2}
-| | And Destination port is added to L2FIB on DUT node | ${tg_node}
-| | ...                                                | ${tg_to_dut_if2}
-| | ...                                                | ${dut_node}
-| | ...                                                | ${dut_to_tg_if2}
-| | ...                                                | ${bd_id2}
-| | And Destination port is added to L2FIB on DUT node | ${tg_node}
-| | ...                                                | ${tg_to_dut_if1}
-| | ...                                                | ${dut_node}
-| | ...                                                | ${vhost_if2}
-| | ...                                                | ${bd_id2}
-| | And VM for Vhost L2BD forwarding is setup | ${dut_node} | ${sock1}
-| | ...                                       | ${sock2}
-| | Then Send and receive ICMPv4 bidirectionally | ${tg_node} | ${tg_to_dut_if1}
-| | ...                                          | ${tg_to_dut_if2}
-| | [Teardown] | Run Keywords | Show Packet Trace on All DUTs | ${nodes}
-| | ... | AND | Show vpp trace dump on all DUTs
-| | ... | AND | Stop and Clear QEMU | ${dut_node} | ${vm_node}
-| | ... | AND | Check VPP PID in Teardown
-
-| TC09: DUT with two L2BDs (static MACs) switches ICMPv6 between TG and VM links
-| | [Documentation]
-| | ... | [Top] TG=DUT=VM. [Enc] Eth-IPv6-ICMPv6. [Cfg] On DUT1 configure \
-| | ... | two L2BDs with static MACs, each with vhost-user i/f to local VM
-| | ... | and i/f to TG; configure VM to loop pkts back betwen its two
-| | ... | virtio i/fs. [Ver] Make TG verify ICMPv6 Echo Req pkts are
-| | ... | switched thru DUT1 and VM in both directions and are correct on
-| | ... | receive. [Ref]
-| | ...
-| | [Tags] | 3_NODE_DOUBLE_LINK_TOPO | VPP_VM_ENV
-| | ...
-| | [Teardown] | Run Keywords | Show Packet Trace on All DUTs | ${nodes}
-| | ... | AND | Show vpp trace dump on all DUTs
-| | ... | AND | Stop and Clear QEMU | ${dut_node} | ${vm_node}
-| | ... | AND | Check VPP PID in Teardown
-| | ...
-| | Given Path for 2-node testing is set
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']}
-| | And Interfaces in 2-node path are up
-| | When VPP Vhost interfaces for L2BD forwarding are setup | ${dut_node}
-| | ...                                                     | ${sock1}
-| | ...                                                     | ${sock2}
-| | And Bridge domain on DUT node is created | ${dut_node} | ${bd_id1}
-| | ...                                      | learn=${FALSE}
-| | And Interface is added to bridge domain | ${dut_node} | ${dut_to_tg_if1}
-| | ...                                     | ${bd_id1}
-| | And Interface is added to bridge domain | ${dut_node} | ${vhost_if1}
-| | ...                                     | ${bd_id1}
-| | And Destination port is added to L2FIB on DUT node | ${tg_node}
-| | ...                                                | ${tg_to_dut_if1}
-| | ...                                                | ${dut_node}
-| | ...                                                | ${dut_to_tg_if1}
-| | ...                                                | ${bd_id1}
-| | And Destination port is added to L2FIB on DUT node | ${tg_node}
-| | ...                                                | ${tg_to_dut_if2}
-| | ...                                                | ${dut_node}
-| | ...                                                | ${vhost_if1}
-| | ...                                                | ${bd_id1}
-| | And Bridge domain on DUT node is created | ${dut_node} | ${bd_id2}
-| | ...                                      | learn=${FALSE}
-| | And Interface is added to bridge domain | ${dut_node} | ${dut_to_tg_if2}
-| | ...                                     | ${bd_id2}
-| | And Interface is added to bridge domain | ${dut_node} | ${vhost_if2}
-| | ...                                     | ${bd_id2}
-| | And Destination port is added to L2FIB on DUT node | ${tg_node}
-| | ...                                                | ${tg_to_dut_if2}
-| | ...                                                | ${dut_node}
-| | ...                                                | ${dut_to_tg_if2}
-| | ...                                                | ${bd_id2}
-| | And Destination port is added to L2FIB on DUT node | ${tg_node}
-| | ...                                                | ${tg_to_dut_if1}
-| | ...                                                | ${dut_node}
-| | ...                                                | ${vhost_if2}
-| | ...                                                | ${bd_id2}
-| | And VM for Vhost L2BD forwarding is setup | ${dut_node} | ${sock1}
-| | ...                                       | ${sock2}
-| | Then Send and receive ICMPv6 bidirectionally | ${tg_node} | ${tg_to_dut_if1}
-| | ...                                          | ${tg_to_dut_if2}