Remove _base from test suite dir names

Change-Id: I2e495f99a88dedc47f64efcc14722bb629a25f02
Signed-off-by: Jan Gelety <jgelety@cisco.com>

4 files changed, 0 insertions, 386 deletions

diff --git a/tests/func/cop_base/eth2p-ethip4-ip4base-copblklistbase-func.robot b/tests/func/cop_base/eth2p-ethip4-ip4base-copblklistbase-func.robot
deleted file mode 100644
index 37e55c0666..0000000000
--- a/tests/func/cop_base/eth2p-ethip4-ip4base-copblklistbase-func.robot
+++ /dev/null
@@ -1,92 +0,0 @@
-# Copyright (c) 2016 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Library | resources.libraries.python.Trace
-| Library | resources.libraries.python.Cop
-| Resource | resources/libraries/robot/default.robot
-| Resource | resources/libraries/robot/interfaces.robot
-| Resource | resources/libraries/robot/ipv4.robot
-| Resource | resources/libraries/robot/traffic.robot
-| Resource | resources/libraries/robot/testing_path.robot
-| Resource | resources/libraries/robot/l2_xconnect.robot
-| Variables  | resources/libraries/python/IPv4NodeAddress.py | ${nodes}
-| Force Tags | HW_ENV | VM_ENV | 3_NODE_SINGLE_LINK_TOPO
-| Test Setup | Func Test Setup
-| Test Teardown | Func Test Teardown
-| Documentation | *COP Security IPv4 Blacklist Tests*
-| ...
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-ICMPv4 on all links.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing and
-| ... | static routes. COP security black-lists are applied on DUT1 ingress
-| ... | interface from TG. DUT2 is configured with L2XC.
-| ... | *[Ver] TG verification:* Test ICMPv4 Echo Request packets are sent in
-| ... | one direction by TG on link to DUT1; on receive TG verifies packets for
-| ... | correctness and drops as applicable.
-| ... | *[Ref] Applicable standard specifications:*
-
-*** Variables ***
-| ${tg_node}= | ${nodes['TG']}
-| ${dut1_node}= | ${nodes['DUT1']}
-| ${dut2_node}= | ${nodes['DUT2']}
-
-| ${dut1_if1_ip}= | 192.168.1.1
-| ${dut1_if2_ip}= | 192.168.2.1
-| ${dut1_if1_ip_GW}= | 192.168.1.2
-| ${dut1_if2_ip_GW}= | 192.168.2.2
-
-| ${test_dst_ip}= | 32.0.0.1
-| ${test_src_ip}= | 16.0.0.1
-
-| ${cop_dut_ip}= | 16.0.0.0
-
-| ${ip_prefix}= | 24
-| ${nodes_ipv4_addresses}= | ${nodes_ipv4_addr}
-
-| ${fib_table_number}= | 1
-
-*** Test Cases ***
-| TC01: DUT drops IPv4 pkts with COP blacklist set with IPv4 src-addr
-| | [Documentation]
-| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-IPv4-ICMPv4. [Cfg] On DUT1 \
-| | ... | configure interface IPv4 addresses and routes in the main
-| | ... | routing domain, add COP blacklist on interface to TG with IPv4
-| | ... | src-addr matching packets generated by TG; on DUT2 configure L2
-| | ... | xconnect. [Ver] Make TG send ICMPv4 Echo Req on its interface to
-| | ... | DUT1; verify no ICMPv4 Echo Req pkts are received. [Ref]
-| | Given Path for 3-node testing is set
-| | ... | ${tg_node} | ${dut1_node} | ${dut2_node} | ${tg_node}
-| | And Interfaces in 3-node path are up
-| | And L2 setup xconnect on DUT
-| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_tg}
-| | And Set Interface Address
-| | ... | ${dut1_node} | ${dut1_to_tg} | ${dut1_if1_ip} | ${ip_prefix}
-| | And Set Interface Address
-| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_if2_ip} | ${ip_prefix}
-| | And Add Arp On Dut
-| | ... | ${dut1_node} | ${dut1_to_tg} | ${dut1_if1_ip_GW} | ${tg_to_dut1_mac}
-| | And Add Arp On Dut
-| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_if2_ip_GW} | ${tg_to_dut2_mac}
-| | And Vpp Route Add | ${dut1_node}
-| | ... | ${test_dst_ip} | ${ip_prefix} | ${dut1_if2_ip_GW} | ${dut1_to_dut2}
-| | And Add fib table | ${dut1_node}
-| | ... | ${cop_dut_ip} | ${ip_prefix} | ${fib_table_number} | drop
-| | When COP Add whitelist Entry
-| | ... | ${dut1_node} | ${dut1_to_tg} | ip4 | ${fib_table_number}
-| | And COP interface enable or disable | ${dut1_node} | ${dut1_to_tg} | enable
-| | Then Send packet from Port to Port should failed | ${tg_node}
-| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
-| | ... | ${dut1_to_tg_mac} | ${tg_to_dut2} | ${dut1_to_dut2_mac}
-| | ... | ${tg_to_dut2_mac}
diff --git a/tests/func/cop_base/eth2p-ethip4-ip4base-copwhlistbase-func.robot b/tests/func/cop_base/eth2p-ethip4-ip4base-copwhlistbase-func.robot
deleted file mode 100644
index eb8be688d9..0000000000
--- a/tests/func/cop_base/eth2p-ethip4-ip4base-copwhlistbase-func.robot
+++ /dev/null
@@ -1,92 +0,0 @@
-# Copyright (c) 2016 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Library | resources.libraries.python.Trace
-| Library | resources.libraries.python.Cop
-| Resource | resources/libraries/robot/default.robot
-| Resource | resources/libraries/robot/interfaces.robot
-| Resource | resources/libraries/robot/ipv4.robot
-| Resource | resources/libraries/robot/traffic.robot
-| Resource | resources/libraries/robot/testing_path.robot
-| Resource | resources/libraries/robot/l2_xconnect.robot
-| Variables  | resources/libraries/python/IPv4NodeAddress.py | ${nodes}
-| Force Tags | HW_ENV | VM_ENV | 3_NODE_SINGLE_LINK_TOPO
-| Test Setup | Func Test Setup
-| Test Teardown | Func Test Teardown
-| Documentation | *COP Security IPv4 Whitelist Tests*
-| ...
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-ICMPv4 on all links.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing and
-| ... | static routes. COP security white-lists are applied on DUT1 ingress
-| ... | interface from TG. DUT2 is configured with L2XC.
-| ... | *[Ver] TG verification:* Test ICMPv4 Echo Request packets are sent in
-| ... | one direction by TG on link to DUT1; on receive TG verifies packets for
-| ... | correctness and drops as applicable.
-| ... | *[Ref] Applicable standard specifications:*
-
-*** Variables ***
-| ${tg_node}= | ${nodes['TG']}
-| ${dut1_node}= | ${nodes['DUT1']}
-| ${dut2_node}= | ${nodes['DUT2']}
-
-| ${dut1_if1_ip}= | 192.168.1.1
-| ${dut1_if2_ip}= | 192.168.2.1
-| ${dut1_if1_ip_GW}= | 192.168.1.2
-| ${dut1_if2_ip_GW}= | 192.168.2.2
-
-| ${test_dst_ip}= | 32.0.0.1
-| ${test_src_ip}= | 16.0.0.1
-
-| ${cop_dut_ip}= | 16.0.0.0
-
-| ${ip_prefix}= | 24
-| ${nodes_ipv4_addresses}= | ${nodes_ipv4_addr}
-
-| ${fib_table_number}= | 1
-
-*** Test Cases ***
-| TC01: DUT permits IPv4 pkts with COP whitelist set with IPv4 src-addr
-| | [Documentation]
-| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-IPv4-ICMPv4. [Cfg] On DUT1 \
-| | ... | configure interface IPv4 addresses and routes in the main
-| | ... | routing domain, add COP whitelist on interface to TG with IPv4
-| | ... | src-addr matching packets generated by TG; on DUT2 configure L2
-| | ... | xconnect. [Ver] Make TG send ICMPv4 Echo Req on its interface to
-| | ... | DUT1; verify received ICMPv4 Echo Req pkts are correct. [Ref]
-| | Given Path for 3-node testing is set
-| | ... | ${tg_node} | ${dut1_node} | ${dut2_node} | ${tg_node}
-| | And Interfaces in 3-node path are up
-| | And L2 setup xconnect on DUT
-| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_tg}
-| | And Set Interface Address
-| | ... | ${dut1_node} | ${dut1_to_tg} | ${dut1_if1_ip} | ${ip_prefix}
-| | And Set Interface Address
-| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_if2_ip} | ${ip_prefix}
-| | And Add Arp On Dut
-| | ... | ${dut1_node} | ${dut1_to_tg} | ${dut1_if1_ip_GW} | ${tg_to_dut1_mac}
-| | And Add Arp On Dut
-| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_if2_ip_GW} | ${tg_to_dut2_mac}
-| | And Vpp Route Add | ${dut1_node}
-| | ... | ${test_dst_ip} | ${ip_prefix} | ${dut1_if2_ip_GW} | ${dut1_to_dut2}
-| | And Add fib table | ${dut1_node}
-| | ... | ${cop_dut_ip} | ${ip_prefix} | ${fib_table_number} | local
-| | When COP Add whitelist Entry
-| | ... | ${dut1_node} | ${dut1_to_tg} | ip4 | ${fib_table_number}
-| | And COP interface enable or disable | ${dut1_node} | ${dut1_to_tg} | enable
-| | Then Send Packet And Check Headers | ${tg_node}
-| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
-| | ... | ${dut1_to_tg_mac} | ${tg_to_dut2} | ${dut1_to_dut2_mac}
-| | ... | ${tg_to_dut2_mac}
diff --git a/tests/func/cop_base/eth2p-ethip6-ip6base-copblklistbase-func.robot b/tests/func/cop_base/eth2p-ethip6-ip6base-copblklistbase-func.robot
deleted file mode 100644
index 7511dfe31b..0000000000
--- a/tests/func/cop_base/eth2p-ethip6-ip6base-copblklistbase-func.robot
+++ /dev/null
@@ -1,101 +0,0 @@
-# Copyright (c) 2016 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Library | resources.libraries.python.Trace
-| Library | resources.libraries.python.Cop
-| Resource | resources/libraries/robot/default.robot
-| Resource | resources/libraries/robot/interfaces.robot
-| Resource | resources/libraries/robot/ipv6.robot
-| Resource | resources/libraries/robot/traffic.robot
-| Resource | resources/libraries/robot/testing_path.robot
-| Resource | resources/libraries/robot/l2_xconnect.robot
-| Variables  | resources/libraries/python/IPv6NodesAddr.py | ${nodes}
-| Force Tags | HW_ENV | VM_ENV | 3_NODE_SINGLE_LINK_TOPO
-| Test Setup | Func Test Setup
-| Test Teardown | Func Test Teardown
-| Documentation | *COP Security IPv6 Blacklist Tests*
-| ...
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv6-ICMPv6 on all links.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv6 routing and
-| ... | static routes. COP security black-lists are applied on DUT1 ingress
-| ... | interface from TG. DUT2 is configured with L2XC.
-| ... | *[Ver] TG verification:* Test ICMPv6 Echo Request packets are sent in
-| ... | one direction by TG on link to DUT1; on receive TG verifies packets for
-| ... | correctness and drops as applicable.
-| ... | *[Ref] Applicable standard specifications:*
-
-*** Variables ***
-| ${tg_node}= | ${nodes['TG']}
-| ${dut1_node}= | ${nodes['DUT1']}
-| ${dut2_node}= | ${nodes['DUT2']}
-
-| ${dut1_if1_ip}= | 3ffe:62::1
-| ${dut1_if2_ip}= | 3ffe:63::1
-| ${dut1_if1_ip_GW}= | 3ffe:62::2
-| ${dut1_if2_ip_GW}= | 3ffe:63::2
-
-| ${dut2_if1_ip}= | 3ffe:72::1
-| ${dut2_if2_ip}= | 3ffe:73::1
-
-| ${test_dst_ip}= | 3ffe:64::1
-| ${test_src_ip}= | 3ffe:61::1
-
-| ${cop_dut_ip}= | 3ffe:61::
-
-| ${ip_prefix}= | 64
-
-| ${nodes_ipv6_addresses}= | ${nodes_ipv6_addr}
-
-| ${fib_table_number}= | 1
-
-*** Test Cases ***
-| TC01: DUT drops IPv6 pkts with COP blacklist set with IPv6 src-addr
-| | [Documentation]
-| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-IPv6-ICMPv6. [Cfg] On DUT1 \
-| | ... | configure interface IPv6 addresses and routes in the main
-| | ... | routing domain, add COP blacklist on interface to TG with IPv6
-| | ... | src-addr matching packets generated by TG; on DUT2 configure L2
-| | ... | xconnect. [Ver] Make TG send ICMPv6 Echo Req on its interface to
-| | ... | DUT1; verify no ICMPv6 Echo Req pkts are received. [Ref]
-| | Given Path for 3-node testing is set
-| | ... | ${tg_node} | ${dut1_node} | ${dut2_node} | ${tg_node}
-| | And Interfaces in 3-node path are up
-| | And L2 setup xconnect on DUT
-| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_tg}
-| | And VPP Set IF IPv6 Addr
-| | ... | ${dut1_node} | ${dut1_to_tg} | ${dut1_if1_ip} | ${ip_prefix}
-| | And VPP Set IF IPv6 Addr
-| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_if2_ip} | ${ip_prefix}
-| | And VPP Set IF IPv6 Addr
-| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_if1_ip} | ${ip_prefix}
-| | And VPP Set IF IPv6 Addr
-| | ... | ${dut2_node} | ${dut2_to_tg} | ${dut2_if2_ip} | ${ip_prefix}
-| | And Add IP Neighbor
-| | ... | ${dut1_node} | ${dut1_to_tg} | ${dut1_if1_ip_GW} | ${tg_to_dut1_mac}
-| | And Add IP Neighbor
-| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_if2_ip_GW} | ${tg_to_dut2_mac}
-| | And Vpp Route Add | ${dut1_node}
-| | ... | ${test_dst_ip} | ${ip_prefix} | ${dut1_if2_ip_GW} | ${dut1_to_dut2}
-| | And Vpp All Ra Suppress Link Layer | ${nodes}
-| | And Add fib table | ${dut1_node}
-| | ... | ${cop_dut_ip} | ${ip_prefix} | ${fib_table_number} | drop
-| | When COP Add whitelist Entry
-| | ... | ${dut1_node} | ${dut1_to_tg} | ip6 | ${fib_table_number}
-| | And COP interface enable or disable | ${dut1_node} | ${dut1_to_tg} | enable
-| | Then Send packet from Port to Port should failed | ${tg_node}
-| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
-| | ... | ${dut1_to_tg_mac} | ${tg_to_dut2} | ${dut1_to_dut2_mac}
-| | ... | ${tg_to_dut2_mac}
diff --git a/tests/func/cop_base/eth2p-ethip6-ip6base-copwhlistbase-func.robot b/tests/func/cop_base/eth2p-ethip6-ip6base-copwhlistbase-func.robot
deleted file mode 100644
index f75f4d0dea..0000000000
--- a/tests/func/cop_base/eth2p-ethip6-ip6base-copwhlistbase-func.robot
+++ /dev/null
@@ -1,101 +0,0 @@
-# Copyright (c) 2016 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Library | resources.libraries.python.Trace
-| Library | resources.libraries.python.Cop
-| Resource | resources/libraries/robot/default.robot
-| Resource | resources/libraries/robot/interfaces.robot
-| Resource | resources/libraries/robot/ipv6.robot
-| Resource | resources/libraries/robot/traffic.robot
-| Resource | resources/libraries/robot/testing_path.robot
-| Resource | resources/libraries/robot/l2_xconnect.robot
-| Variables  | resources/libraries/python/IPv6NodesAddr.py | ${nodes}
-| Force Tags | HW_ENV | VM_ENV | 3_NODE_SINGLE_LINK_TOPO
-| Test Setup | Func Test Setup
-| Test Teardown | Func Test Teardown
-| Documentation | *COP Security IPv6 Whitelist Tests*
-| ...
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv6-ICMPv6 on all links.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv6 routing and
-| ... | static routes. COP security white-lists are applied on DUT1 ingress
-| ... | interface from TG. DUT2 is configured with L2XC.
-| ... | *[Ver] TG verification:* Test ICMPv6 Echo Request packets are sent in
-| ... | one direction by TG on link to DUT1; on receive TG verifies packets for
-| ... | correctness and drops as applicable.
-| ... | *[Ref] Applicable standard specifications:*
-
-*** Variables ***
-| ${tg_node}= | ${nodes['TG']}
-| ${dut1_node}= | ${nodes['DUT1']}
-| ${dut2_node}= | ${nodes['DUT2']}
-
-| ${dut1_if1_ip}= | 3ffe:62::1
-| ${dut1_if2_ip}= | 3ffe:63::1
-| ${dut1_if1_ip_GW}= | 3ffe:62::2
-| ${dut1_if2_ip_GW}= | 3ffe:63::2
-
-| ${dut2_if1_ip}= | 3ffe:72::1
-| ${dut2_if2_ip}= | 3ffe:73::1
-
-| ${test_dst_ip}= | 3ffe:64::1
-| ${test_src_ip}= | 3ffe:61::1
-
-| ${cop_dut_ip}= | 3ffe:61::
-
-| ${ip_prefix}= | 64
-
-| ${nodes_ipv6_addresses}= | ${nodes_ipv6_addr}
-
-| ${fib_table_number}= | 1
-
-*** Test Cases ***
-| TC01: DUT permits IPv6 pkts with COP whitelist set with IPv6 src-addr
-| | [Documentation]
-| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-IPv6-ICMPv6. [Cfg] On DUT1 \
-| | ... | configure interface IPv6 addresses and routes in the main
-| | ... | routing domain, add COP whitelist on interface to TG with IPv6
-| | ... | src-addr matching packets generated by TG; on DUT2 configure L2
-| | ... | xconnect. [Ver] Make TG send ICMPv6 Echo Req on its interface to
-| | ... | DUT1; verify received ICMPv6 Echo Req pkts are correct. [Ref]
-| | Given Path for 3-node testing is set
-| | ... | ${tg_node} | ${dut1_node} | ${dut2_node} | ${tg_node}
-| | And Interfaces in 3-node path are up
-| | And L2 setup xconnect on DUT
-| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_tg}
-| | And VPP Set IF IPv6 Addr
-| | ... | ${dut1_node} | ${dut1_to_tg} | ${dut1_if1_ip} | ${ip_prefix}
-| | And VPP Set IF IPv6 Addr
-| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_if2_ip} | ${ip_prefix}
-| | And VPP Set IF IPv6 Addr
-| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_if1_ip} | ${ip_prefix}
-| | And VPP Set IF IPv6 Addr
-| | ... | ${dut2_node} | ${dut2_to_tg} | ${dut2_if2_ip} | ${ip_prefix}
-| | And Add IP Neighbor
-| | ... | ${dut1_node} | ${dut1_to_tg} | ${dut1_if1_ip_GW} | ${tg_to_dut1_mac}
-| | And Add IP Neighbor
-| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_if2_ip_GW} | ${tg_to_dut2_mac}
-| | And Vpp Route Add | ${dut1_node}
-| | ... | ${test_dst_ip} | ${ip_prefix} | ${dut1_if2_ip_GW} | ${dut1_to_dut2}
-| | And Vpp All Ra Suppress Link Layer | ${nodes}
-| | And Add fib table | ${dut1_node} | ${cop_dut_ip} | ${ip_prefix} |
-| | ... | ${fib_table_number} | local
-| | When COP Add whitelist Entry | ${dut1_node} | ${dut1_to_tg} | ip6 |
-| | ... | ${fib_table_number}
-| | And COP interface enable or disable | ${dut1_node} | ${dut1_to_tg} | enable
-| | Then Send Packet And Check Headers | ${tg_node}
-| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} | ${tg_to_dut1_mac}
-| | ... | ${dut1_to_tg_mac} | ${tg_to_dut2} | ${dut1_to_dut2_mac}
-| | ... | ${tg_to_dut2_mac}