csit-func-hc naming change

 - change test suite filenames
 - add numbering to all test cases

more details at https://wiki.fd.io/view/CSIT/csit-perf-tc-naming-change

Change-Id: I58e6c60f750c07e99c6949d8fe2510780fa9007a
Signed-off-by: selias <samelias@cisco.com>

1 files changed, 0 insertions, 133 deletions

diff --git a/tests/func/honeycomb/010_interface_management.robot b/tests/func/honeycomb/010_interface_management.robot
deleted file mode 100644
index 5773b9bdfa..0000000000
--- a/tests/func/honeycomb/010_interface_management.robot
+++ /dev/null
@@ -1,133 +0,0 @@
-# Copyright (c) 2016 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Variables ***
-# Interface to run tests on.
-| ${interface}= | ${node['interfaces']['port1']['name']}
-# Configuration which will be set and verified during tests.
-| ${ipv4_address}= | 192.168.0.2
-| ${ipv4_address2}= | 192.168.0.3
-| ${ipv4_mask}= | 255.255.255.0
-| ${ipv4_prefix}= | ${24}
-| @{ipv4_neighbor}= | 192.168.0.4 | 08:00:27:c0:5d:37
-| &{ipv4_settings}= | mtu=${9000}
-| @{ipv6_address}= | 10::10 | ${64}
-| @{ipv6_neighbor}= | 10::11 | 08:00:27:c0:5d:37
-| &{ipv6_settings}= | enabled=${True} | forwarding=${True} | mtu=${9000}
-| ... | dup-addr-detect-transmits=${5}
-| &{ethernet}= | mtu=${9000}
-| &{routing}= | vrf-id=${27}
-| &{vxlan_settings}= | src=10.0.1.20 | dst=10.0.3.20 | vni=${1000}
-| ... | encap-vrf-id=${1000}
-
-*** Settings ***
-| Resource | resources/libraries/robot/default.robot
-| Resource | resources/libraries/robot/honeycomb/interfaces.robot
-| Resource | resources/libraries/robot/honeycomb/honeycomb.robot
-| Force Tags | honeycomb_sanity
-| Suite Teardown | Run Keyword If Any Tests Failed
-| | ... | Restart Honeycomb And VPP And Clear Persisted Configuration | ${node}
-| Documentation | *Honeycomb interface management test suite.*
-| ...
-| ... | Test suite uses the first interface of the first DUT node.
-
-*** Test Cases ***
-| Honeycomb configures and reads interface state
-| | [Documentation] | Check if Honeycomb API can modify the admin state of\
-| | ... | VPP interfaces.
-| | Given Interface state from Honeycomb should be
-| | ... | ${node} | ${interface} | down
-| | And Interface state from VAT should be | ${node} | ${interface} | down
-| | When Honeycomb sets interface state | ${node} | ${interface} | up
-| | Then Interface state from Honeycomb should be
-| | ... | ${node} | ${interface} | up
-| | And Interface state from VAT should be | ${node} | ${interface} | up
-| | When Honeycomb sets interface state | ${node} | ${interface} | down
-| | Then Interface state from Honeycomb should be
-| | ... | ${node} | ${interface} | down
-| | And Interface state from VAT should be | ${node} | ${interface} | down
-
-| Honeycomb modifies interface IPv4 address with netmask
-| | [Documentation] | Check if Honeycomb API can configure interfaces for ipv4\
-| | ... | with address and netmask provided.
-| | Given IPv4 address from Honeycomb should be empty | ${node} | ${interface}
-| | And ipv4 address from VAT should be empty | ${node} | ${interface}
-| | When Honeycomb sets interface ipv4 address | ${node} | ${interface}
-| | ... | ${ipv4_address} | ${ipv4_mask}
-| | Then IPv4 address from Honeycomb should be
-| | ... | ${node} | ${interface} | ${ipv4_address} | ${ipv4_prefix}
-| | And IPv4 address from VAT should be
-| | ... | ${node} | ${interface} | ${ipv4_address} | ${ipv4_mask}
-
-| Honeycomb removes IPv4 address from interface
-| | [Documentation] | Check if Honeycomb API can remove configured ipv4\
-| | ... | addresses from interface.
-| | Given IPv4 address from Honeycomb should be
-| | ... | ${node} | ${interface} | ${ipv4_address} | ${ipv4_prefix}
-| | And IPv4 address from VAT should be
-| | ... | ${node} | ${interface} | ${ipv4_address} | ${ipv4_mask}
-| | When Honeycomb removes interface ipv4 addresses | ${node} | ${interface}
-| | Then IPv4 address from Honeycomb should be empty | ${node} | ${interface}
-| | And ipv4 address from VAT should be empty | ${node} | ${interface}
-
-| Honeycomb modifies interface IPv4 address with prefix
-| | [Documentation] | Check if Honeycomb API can configure interfaces for ipv4\
-| | ... | with address and prefix provided.
-| | [Teardown] | Honeycomb removes interface ipv4 addresses | ${node}
-| | ... | ${interface}
-| | Given IPv4 address from Honeycomb should be empty | ${node} | ${interface}
-| | And ipv4 address from VAT should be empty | ${node} | ${interface}
-| | When Honeycomb sets interface ipv4 address with prefix
-| | ... | ${node} | ${interface} | ${ipv4_address2} | ${ipv4_prefix}
-| | Then IPv4 address from Honeycomb should be
-| | ... | ${node} | ${interface} | ${ipv4_address2} | ${ipv4_prefix}
-| | And IPv4 address from VAT should be
-| | ... | ${node} | ${interface} | ${ipv4_address2} | ${ipv4_mask}
-
-| Honeycomb modifies IPv4 neighbor table
-| | [Documentation] | Check if Honeycomb API can add and remove ARP entries.
-# Operational data and VAT dump not available (HONEYCOMB-111)
-| | [Tags] | EXPECTED_FAILING
-| | [Teardown] | Honeycomb clears all interface ipv4 neighbors
-| | ... | ${node} | ${interface}
-| | When Honeycomb adds interface ipv4 neighbor
-| | ... | ${node} | ${interface} | @{ipv4_neighbor}
-| | Then IPv4 neighbor from Honeycomb should be
-| | ... | ${node} | ${interface} | @{ipv4_neighbor}
-
-| Honeycomb modifies interface configuration - IPv6
-| | [Documentation] | Check if Honeycomb API can configure interfaces for ipv6.
-# Configuring IPv6 not implemented (HONEYCOMB-102)
-| | [Tags] | EXPECTED_FAILING
-| | When Honeycomb sets interface ipv6 address
-| | ... | ${node} | ${interface} | @{ipv6_address}
-| | Then IPv6 address from Honeycomb should be
-| | ... | ${node} | ${interface} | @{ipv6_address}
-| | And IPv6 address from VAT should be
-| | ... | ${node} | ${interface} | @{ipv6_address}
-
-# TODO: Honeycomb modifies IPv6 neighbor table
-
-| Honeycomb modifies interface configuration - MTU
-| | [Documentation] | Check if Honeycomb API can configure interface\
-| | ... | MTU value.
-# Configuring MTU not implemented (HONEYCOMB-126)
-| | [Tags] | EXPECTED_FAILING
-| | When Honeycomb sets interface ethernet configuration
-| | ... | ${node} | ${interface} | ${ethernet}
-| | Then Interface ethernet configuration from Honeycomb should be
-| | ... | ${node} | ${interface} | ${ethernet}
-| | And Interface ethernet configuration from VAT should be
-| | ... | ${node} | ${interface} | ${ethernet['mtu']}
-
-# TODO: Honeycomb configures routing on interface