CSIT-220: Rename directories in tests directory

- Move performance directory one level up and rename it to “perf”
- Rename “suites” directory to “func”
- Create __init__.py in “perf” directory
- Rename fds_related_tests to fds

Change-Id: I59f06afe1c5b95dd8a48417b8fbfd1fca8797097
Signed-off-by: Matej Klotton <mklotton@cisco.com>

1 files changed, 115 insertions, 0 deletions

diff --git a/tests/func/honeycomb/030_vxlan.robot b/tests/func/honeycomb/030_vxlan.robot
new file mode 100644
index 0000000000..7e192cea47
--- /dev/null
+++ b/tests/func/honeycomb/030_vxlan.robot
@@ -0,0 +1,115 @@
+# Copyright (c) 2016 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Variables ***
+# Interfaces to run tests on.
+| ${interface}= | ${node['interfaces']['port1']['name']}
+| ${vx_interface}= | vx_tunnel_test
+# Configuration which will be set and verified during tests.
+| &{vxlan_settings}= | src=192.168.0.2 | dst=192.168.0.3 | vni=${88}
+| ... | encap-vrf-id=${0}
+| &{vxlan_settings2}= | src=192.168.0.4 | dst=192.168.0.5 | vni=${47}
+| ... | encap-vrf-id=${0}
+| &{vxlan_settings_ipv6}= | src=10::10 | dst=10::11 | vni=${88}
+| ... | encap-vrf-id=${0}
+| &{vxlan_settings_ipv6_long}= | src=10:0:0:0:0:0:0:10 | dst=10:0:0:0:0:0:0:11
+| ... | vni=${88} | encap-vrf-id=${0}
+
+*** Settings ***
+| Resource | resources/libraries/robot/default.robot
+| Resource | resources/libraries/robot/honeycomb/interfaces.robot
+| Resource | resources/libraries/robot/honeycomb/vxlan.robot
+# import additional VxLAN settings from resource file
+| Variables | resources/test_data/honeycomb/vxlan.py
+| Force Tags | honeycomb_sanity
+| Documentation | *Honeycomb VxLAN management test suite.*
+| ...
+| ... | Test suite uses the first interface of the first DUT node.
+
+*** Test Cases ***
+| Honeycomb configures VxLAN tunnel
+| | [Documentation] | Check if Honeycomb API can configure VxLAN settings.
+| | Given VxLAN configuration from Honeycomb should be empty
+| | ... | ${node} | ${vx_interface}
+| | And VxLAN configuration from VAT should be empty | ${node}
+| | When Honeycomb sets interface VxLAN configuration
+| | ... | ${node} | ${vx_interface} | ${vxlan_settings}
+| | Then VxLAN configuration from Honeycomb should be
+| | ... | ${node} | ${vx_interface} | ${vxlan_settings}
+| | And VxLAN configuration from VAT should be
+| | ... | ${node} | ${vxlan_settings}
+
+| Honeycomb disables VxLAN tunnel
+| | [Documentation] | Check if Honeycomb API can reset VxLAN configuration.
+| | Given VxLAN configuration from Honeycomb should be
+| | ... | ${node} | ${vx_interface} | ${vxlan_settings}
+| | And VxLAN configuration from VAT should be
+| | ... | ${node} | ${vxlan_settings}
+| | When Honeycomb removes VxLAN tunnel settings | ${node} | ${vx_interface}
+| | Then VxLAN configuration from Honeycomb should be empty
+| | ... | ${node} | ${vx_interface}
+| | And VxLAN configuration from VAT should be empty | ${node}
+
+Honeycomb can configure VXLAN tunnel after one has been disabled
+| | [Documentation] | Check if Honeycomb API can configure VxLAN settings again\
+| | ... | after previous settings have been removed.
+| | [Teardown] | Honeycomb removes VxLAN tunnel settings
+| | ... | ${node} | ${vx_interface}
+| | Given VxLAN configuration from Honeycomb should be empty
+| | ... | ${node} | ${vx_interface}
+| | And VxLAN configuration from VAT should be empty | ${node}
+| | When Honeycomb sets interface VxLAN configuration
+| | ... | ${node} | ${vx_interface} | ${vxlan_settings2}
+| | Then VxLAN configuration from Honeycomb should be
+| | ... | ${node} | ${vx_interface} | ${vxlan_settings2}
+| | And VxLAN configuration from VAT should be
+| | ... | ${node} | ${vxlan_settings2}
+
+| Honeycomb does not set VxLAN configuration on another interface type
+| | [Documentation] | Check if Honeycomb API prevents setting VxLAN\
+| | ... | on incorrect interface.
+| | Given VxLAN configuration from Honeycomb should be empty
+| | ... | ${node} | ${interface}
+| | And VxLAN configuration from VAT should be empty | ${node}
+| | When Honeycomb fails setting VxLan on different interface type
+| | ... | ${node} | ${interface} | ${vxlan_settings2}
+| | Then VxLAN configuration from Honeycomb should be empty
+| | ... | ${node} | ${interface}
+| | And VxLAN configuration from VAT should be empty
+| | ... | ${node}
+
+| Honeycomb does not set invalid VxLAN configuration
+| | [Documentation] | Check if Honeycomb API prevents setting incorrect VxLAN\
+| | ... | settings.
+| | Given VxLAN configuration from Honeycomb should be empty
+| | ... | ${node} | ${vx_interface}
+| | And VxLAN configuration from VAT should be empty | ${node}
+| | When Honeycomb fails setting invalid VxLAN configuration
+| | ... | ${node} | ${vx_interface} | ${vxlan_invalid}
+| | Then VxLAN configuration from Honeycomb should be empty
+| | ... | ${node} | ${vx_interface}
+
+| Honeycomb configures VxLAN tunnel with ipv6
+| | [Documentation] | Check if Honeycomb API can configure VxLAN with\
+| | ... | ipv6 settings.
+| | [Teardown] | Honeycomb removes VxLAN tunnel settings
+| | ... | ${node} | ${vx_interface}
+| | Given VxLAN configuration from Honeycomb should be empty
+| | ... | ${node} | ${vx_interface}
+| | And VxLAN configuration from VAT should be empty | ${node}
+| | When Honeycomb sets interface VxLAN configuration
+| | ... | ${node} | ${vx_interface} | ${vxlan_settings_ipv6}
+| | Then VxLAN configuration from Honeycomb should be
+| | ... | ${node} | ${vx_interface} | ${vxlan_settings_ipv6_long}
+| | And VxLAN configuration from VAT should be
+| | ... | ${node} | ${vxlan_settings_ipv6}