csit-func-hc naming change

 - change test suite filenames
 - add numbering to all test cases

more details at https://wiki.fd.io/view/CSIT/csit-perf-tc-naming-change

Change-Id: I58e6c60f750c07e99c6949d8fe2510780fa9007a
Signed-off-by: selias <samelias@cisco.com>

1 files changed, 0 insertions, 159 deletions

diff --git a/tests/func/honeycomb/100_lisp.robot b/tests/func/honeycomb/100_lisp.robot
deleted file mode 100644
index 5f602c5780..0000000000
--- a/tests/func/honeycomb/100_lisp.robot
+++ /dev/null
@@ -1,159 +0,0 @@
-# Copyright (c) 2016 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Variables***
-| ${interface}= | ${node['interfaces']['port1']['name']}
-| ${bd_name}= | bd_lisp
-| ${bd2_name}= | bd2_lisp
-| &{bd_settings}= | flood=${True} | forward=${True} | learn=${True}
-| ... | unknown-unicast-flood=${True} | arp-termination=${True}
-
-*** Settings ***
-| Resource | resources/libraries/robot/default.robot
-| Resource | resources/libraries/robot/honeycomb/honeycomb.robot
-| Resource | resources/libraries/robot/honeycomb/lisp.robot
-| Resource | resources/libraries/robot/honeycomb/bridge_domain.robot
-| Variables | resources/test_data/honeycomb/lisp.py
-| Documentation | *Honeycomb Lisp test suite.*
-| Suite Teardown | Run Keyword If Any Tests Failed
-| ... | Restart Honeycomb And VPP And Clear Persisted Configuration | ${node}
-| Force Tags | honeycomb_sanity
-
-*** Test Cases ***
-| TC01: Honeycomb enables Lisp feature
-| | [Documentation] | Check if Honeycomb can enable the Lisp feature.
-| | Given Lisp Should Not Be Configured | ${node}
-| | When Honeycomb Enables Lisp | ${node}
-| | Then Lisp state From Honeycomb Should Be | ${node} | enabled
-| | And Lisp state From VAT Should Be | ${node} | enabled
-
-| TC02: Honeycomb adds locator set and locator
-| | [Documentation] | Check if Honeycomb can configure a locator set.
-| | Given Lisp state From Honeycomb Should Be | ${node} | enabled
-| | When Honeycomb adds locator set | ${node} | ${interface} | ${locator_set}
-| | Then Locator Set From Honeycomb Should Be
-| | ... | ${node} | ${interface} | ${locator_set}
-
-| TC03: Honeycomb configures Lisp - remote mapping - Bridge Domain
-| | [Documentation] | Check if Honeycomb can configure a remote Lisp mapping\
-| | ... | with a bridge domain.
-| | Given Lisp state From Honeycomb Should Be | ${node} | enabled
-| | And Honeycomb creates first l2 bridge domain
-| | ... | ${node} | ${bd_name} | ${bd_settings}
-| | When Honeycomb adds Lisp mapping | ${node} | ${lisp_settings_remote_bd}
-| | Then Lisp mapping From Honeycomb Should Be
-| | ... | ${node} | ${remote_bd_subtable}
-| | And Lisp mapping From VAT Should Be
-| | ... | ${node} | ${vat_remote_bd}
-
-| TC04: Honeycomb can remove Lisp mapping
-| | [Documentation] | Check if Honeycomb can remove a configured Lisp mapping.
-| | Given Lisp mapping From Honeycomb Should Be
-| | ... | ${node} | ${remote_bd_subtable}
-| | And Lisp mapping From VAT Should Be
-| | ... | ${node} | ${vat_remote_bd}
-| | When Honeycomb removes all lisp mappings | ${node}
-| | Then Lisp mappings from Honeycomb should not exist
-| | ... | ${node}
-| | And Lisp mappings from VAT should not exist
-| | ... | ${node}
-
-| TC05: Honeycomb configures Lisp - remote mapping - VRF
-| | [Documentation] | Check if Honeycomb can configure a remote Lisp mapping\
-| | ... | with VRF.
-| | [Teardown] | Honeycomb removes all lisp mappings | ${node}
-| | Given Lisp mappings from Honeycomb should not exist
-| | ... | ${node}
-| | And Lisp mappings from VAT should not exist
-| | ... | ${node}
-| | When Honeycomb adds Lisp mapping | ${node} | ${lisp_settings_remote_vrf}
-| | Then Lisp mapping From Honeycomb Should Be
-| | ... | ${node} | ${remote_vrf_subtable}
-| | And Lisp mapping From VAT Should Be | ${node} | ${vat_remote_vrf}
-
-| TC06: Honeycomb configures Lisp - local mapping - Bridge Domain
-| | [Documentation] | Check if Honeycomb can configure a local Lisp mapping\
-| | ... | with a bridge domain.
-| | [Teardown] | Honeycomb removes all lisp mappings | ${node}
-| | Given Locator Set From Honeycomb Should Be
-| | ... | ${node} | ${interface} | ${locator_set}
-| | And Lisp mappings from Honeycomb should not exist
-| | ... | ${node}
-| | And Lisp mappings from VAT should not exist
-| | ... | ${node}
-| | And Honeycomb creates first l2 bridge domain
-| | ... | ${node} | ${bd2_name} | ${bd_settings}
-| | When Honeycomb adds Lisp mapping | ${node} | ${lisp_settings_local_bd}
-| | Then Lisp mapping From Honeycomb Should Be | ${node} | ${local_bd_subtable}
-| | And Lisp mapping From VAT Should Be | ${node} | ${vat_local_bd}
-
-| TC07: Honeycomb configures Lisp - local mapping - VRF
-| | [Documentation] | Check if Honeycomb can configure a local Lisp mapping\
-| | ... | with VRF.
-| | [Teardown] | Honeycomb removes all lisp mappings | ${node}
-| | Given Locator Set From Honeycomb Should Be
-| | ... | ${node} | ${interface} | ${locator_set}
-| | And Lisp mappings from Honeycomb should not exist
-| | ... | ${node}
-| | And Lisp mappings from VAT should not exist
-| | ... | ${node}
-| | When Honeycomb adds Lisp mapping | ${node} | ${lisp_settings_local_vrf}
-| | Then Lisp mapping From Honeycomb Should Be | ${node} | ${local_vrf_subtable}
-| | And Lisp mapping From VAT Should Be | ${node} | ${vat_local_vrf}
-
-| TC08: Honeycomb configures Lisp mapping with adjacency
-| | [Documentation] | Check if Honeycomb can configure local and remote Lisp\
-| | ... | mappings with VRF, and configure adjacency.
-| | [Tags] | EXPECTED_FAILING
-# Requests below "vrf-subtable" level fail on table-id lookup (HONEYCOMB-290)
-| | [Teardown] | Honeycomb removes all lisp mappings | ${node}
-| | Given Locator Set From Honeycomb Should Be
-| | ... | ${node} | ${interface} | ${locator_set}
-| | And Honeycomb creates first l2 bridge domain
-| | ... | ${node} | ${bd2_name} | ${bd_settings}
-| | And Lisp mappings from Honeycomb should not exist
-| | ... | ${node}
-| | And Lisp mappings from VAT should not exist
-| | ... | ${node}
-| | And Honeycomb adds Lisp mapping | ${node} | ${lisp_settings_local_vrf}
-| | And Honeycomb adds Lisp mapping | ${node} | ${lisp_settings_remote_vrf}
-| | When Honeycomb adds Lisp adjacency | ${node} | ${4} | remote_map_vrf
-| | ... | adj01 | ${remote_vrf_adjacency}
-| | Then Lisp mapping from Honeycomb should be
-| | ... | ${node} | ${remote_adj_subtable}
-
-| TC09: Honeycomb configures Lisp map resolver
-| | [Documentation] | Check if Honeycomb can configure a Lisp map resolver.
-| | Given Lisp state From Honeycomb Should Be | ${node} | enabled
-| | And Lisp state From VAT Should Be | ${node} | enabled
-| | When Honeycomb adds Lisp Map resolver | ${node} | 192.168.0.4
-| | Then Map resolver from Honeycomb should be | ${node} | 192.168.0.4
-| | And Map resolver from VAT should be | ${node} | 192.168.0.4
-
-| TC10: Honeycomb enabled Lisp PITR feature
-| | [Documentation] | Check if Honeycomb can configure the Lisp PITR feature.
-| | Given Locator Set From Honeycomb Should Be
-| | ... | ${node} | ${interface} | ${locator_set}
-| | When Honeycomb enables Lisp PITR feature | ${node} | ${locator_set}
-| | Then PITR config from Honeycomb should be | ${node} | ${locator_set}
-| | And PITR config from VAT should be | ${node} | ${locator_set}
-
-| TC11: Honeycomb can remove configuration of Lisp features
-| | [Documentation] | Check if Honeycomb can disable all Lisp features.
-| | [Tags] | EXPECTED_FAILING
-# Delete operation fails due to incorrect write order(HONEYCOMB-296),
-# but returns code 200: OK (HONEYCOMB-297)
-| | Given Map resolver from Honeycomb should be | ${node} | 192.168.0.4
-| | And PITR config from Honeycomb should be | ${node} | ${locator_set}
-| | When Honeycomb disables all Lisp features | ${node}
-| | Then Lisp Should Not Be Configured | ${node}