csit-func-hc naming change

 - change test suite filenames
 - add numbering to all test cases

more details at https://wiki.fd.io/view/CSIT/csit-perf-tc-naming-change

Change-Id: I58e6c60f750c07e99c6949d8fe2510780fa9007a
Signed-off-by: selias <samelias@cisco.com>
(cherry picked from commit 20a24b36a6fc172c209dcc154e138f6e06e85bd5)

1 files changed, 127 insertions, 0 deletions

diff --git a/tests/func/honeycomb/mgmt-cfg-nsh-apihc-apivat-func.robot b/tests/func/honeycomb/mgmt-cfg-nsh-apihc-apivat-func.robot
new file mode 100644
index 0000000000..f7e262234a
--- /dev/null
+++ b/tests/func/honeycomb/mgmt-cfg-nsh-apihc-apivat-func.robot
@@ -0,0 +1,127 @@
+# Copyright (c) 2016 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Variables***
+| ${super_if}= | ${node['interfaces']['port1']['name']}
+
+*** Settings ***
+| Resource | resources/libraries/robot/default.robot
+| Resource | resources/libraries/robot/honeycomb/nsh.robot
+| Resource | resources/libraries/robot/honeycomb/honeycomb.robot
+| Resource | resources/libraries/robot/honeycomb/vxlan_gpe.robot
+| Variables | resources/test_data/honeycomb/nsh.py
+| Variables | resources/test_data/honeycomb/vxlan_gpe.py
+| Documentation | *Honeycomb NSH test suite.*
+| Suite Teardown | Run Keyword If Any Tests Failed
+| ... | Restart Honeycomb And VPP And Clear Persisted Configuration | ${node}
+| Force Tags | honeycomb_sanity
+
+*** Test Cases ***
+| TC01: Honeycomb can configure NSH entry
+| | [Documentation] | Check if Honeycomb can configure an NSH entry.
+| | Given NSH configuration from Honeycomb should be empty | ${node}
+| | When Honeycomb adds NSH entry | ${node} | entry1 | ${nsh_entry1}
+| | Then NSH entry from Honeycomb should be
+| | ... | ${node} | entry1 | ${nsh_entry1_oper}
+
+| TC02: Honeycomb can remove NSH entry
+| | [Documentation] | Check if Honeycomb can remove an existing NSH entry.
+| | Given NSH entry from Honeycomb should be
+| | ... | ${node} | entry1 | ${nsh_entry1_oper}
+| | When Honeycomb removes NSH entry | ${node} | entry1
+| | Then NSH configuration from Honeycomb should be empty | ${node}
+
+| TC03: Honeycomb can configure new NSH entry
+| | [Documentation] | Check if Honeycomb can configure an NSH antry after one\
+| | ... | has been deleted.
+| | [Teardown] | Honeycomb removes NSH entry | ${node} | entry2
+| | Given NSH configuration from Honeycomb should be empty | ${node}
+| | When Honeycomb adds NSH entry | ${node} | entry2 | ${nsh_entry2}
+| | Then NSH entry from Honeycomb should be
+| | ... | ${node} | entry2 | ${nsh_entry2_oper}
+
+| TC04: Honeycomb can configure multiple NSH entries at the same time
+| | [Documentation] | Check if Honeycomb can configure an NSH entry when one\
+| | ... | already exists.
+| | [Teardown] | Honeycomb clears NSH configuration | ${node}
+| | Given NSH configuration from Honeycomb should be empty | ${node}
+| | When Honeycomb adds NSH entry | ${node} | entry1 | ${nsh_entry1}
+| | And Honeycomb adds NSH entry | ${node} | entry2 | ${nsh_entry2}
+| | Then NSH entry from Honeycomb should be
+| | ... | ${node} | entry1 | ${nsh_entry1_oper}
+| | And NSH entry from Honeycomb should be
+| | ... | ${node} | entry2 | ${nsh_entry2_oper}
+
+| TC05: Honeycomb can configure NSH map
+| | [Documentation] | Check if Honeycomb can configure an NSH map.
+| | Given NSH configuration from Honeycomb should be empty | ${node}
+| | And Honeycomb creates VxLAN GPE interface
+| | ... | ${node} | ${vxlan_gpe_if1}
+| | ... | ${vxlan_gpe_base_settings1} | ${vxlan_gpe_settings1}
+| | When Honeycomb adds NSH entry | ${node} | entry1 | ${nsh_entry1}
+| | And Honeycomb adds NSH map | ${node} | map1 | ${nsh_map1}
+| | Then NSH map from Honeycomb should be | ${node} | map1 | ${nsh_map1_oper}
+
+| TC06: Honeycomb can remove NSH map
+| | [Documentation] | Check if Honeycomb can remove an existing NSH map.
+| | Given NSH entry from Honeycomb should be
+| | ... | ${node} | entry1 | ${nsh_entry1_oper}
+| | And VxLAN GPE configuration from Honeycomb should be
+| | ... | ${node} | ${vxlan_gpe_if1}
+| | ... | ${vxlan_gpe_base_settings1} | ${vxlan_gpe_settings1}
+| | And NSH map from Honeycomb should be | ${node} | map1 | ${nsh_map1_oper}
+| | When Honeycomb removes NSH map | ${node} | map1
+| | Then NSH map from Honeycomb should not exist | ${node} | map1
+| | And NSH entry from Honeycomb should be
+| | ... | ${node} | entry1 | ${nsh_entry1_oper}
+
+| TC07: Honeycomb can modify existing NSH map
+| | [Documentation] | Check if Honeycomb can configure an NSH map after one\
+| | ... | has been deleted.
+| | [Teardown] | Honeycomb removes NSH map | ${node} | map1_edit
+| | Given NSH map from Honeycomb should not exist | ${node} | map1_edit
+| | And NSH entry from Honeycomb should be
+| | ... | ${node} | entry1 | ${nsh_entry1_oper}
+| | And VxLAN GPE configuration from Honeycomb should be
+| | ... | ${node} | ${vxlan_gpe_if1}
+| | ... | ${vxlan_gpe_base_settings1} | ${vxlan_gpe_settings1}
+| | When Honeycomb adds NSH map | ${node} | map1_edit | ${nsh_map1_edit}
+| | Then NSH map from Honeycomb should be
+| | ... | ${node} | map1_edit | ${nsh_map1_edit_oper}
+| | And NSH entry from Honeycomb should be
+| | ... | ${node} | entry1 | ${nsh_entry1_oper}
+
+| TC08: Honeycomb can configure multiple NSH maps at the same time
+| | [Documentation] | Check if Honeycomb can configure and NSH map when one\
+| | ... | already exists.
+| | [Teardown] | Run Keywords
+| | ... | Honeycomb clears NSH configuration | ${node} | AND
+| | ... | Honeycomb removes VxLAN GPE interface
+| | ... | ${node} | ${vxlan_gpe_if1} | AND
+| | ... | Honeycomb removes VxLAN GPE interface
+| | ... | ${node} | ${vxlan_gpe_if2}
+| | Given NSH map from Honeycomb should not exist | ${node} | map2
+| | And NSH entry from Honeycomb should be
+| | ... | ${node} | entry1 | ${nsh_entry1_oper}
+| | And VxLAN GPE configuration from Honeycomb should be
+| | ... | ${node} | ${vxlan_gpe_if1}
+| | ... | ${vxlan_gpe_base_settings1} | ${vxlan_gpe_settings1}
+| | And Honeycomb creates VxLAN GPE interface
+| | ... | ${node} | ${vxlan_gpe_if2}
+| | ... | ${vxlan_gpe_base_settings2} | ${vxlan_gpe_settings2}
+| | When Honeycomb adds NSH map | ${node} | map1 | ${nsh_map1}
+| | And Honeycomb adds NSH map | ${node} | map2 | ${nsh_map2}
+| | Then NSH map from Honeycomb should be
+| | ... | ${node} | map1 | ${nsh_map1_oper}
+| | And NSH map from Honeycomb should be
+| | ... | ${node} | map2 | ${nsh_map2_oper}