CSIT-687: Directory structure reorganization

Change-Id: I772c9e214be2461adf58124998d272e7d795220f
Signed-off-by: Tibor Frank <tifrank@cisco.com>
Signed-off-by: Maciek Konstantynowicz <mkonstan@cisco.com>

1 files changed, 0 insertions, 139 deletions

diff --git a/tests/func/honeycomb/mgmt-cfg-vxlan-apihc-apivat-func.robot b/tests/func/honeycomb/mgmt-cfg-vxlan-apihc-apivat-func.robot
deleted file mode 100644
index 74c18109d1..0000000000
--- a/tests/func/honeycomb/mgmt-cfg-vxlan-apihc-apivat-func.robot
+++ /dev/null
@@ -1,139 +0,0 @@
-# Copyright (c) 2016 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Variables ***
-# Interfaces to run tests on.
-| ${interface}= | ${node['interfaces']['port1']['name']}
-| ${vx_interface}= | vx_tunnel_test
-# Configuration which will be set and verified during tests.
-| &{vxlan_settings}= | src=192.168.0.2 | dst=192.168.0.3 | vni=${88}
-| ... | encap-vrf-id=${0}
-| &{vxlan_settings2}= | src=192.168.0.4 | dst=192.168.0.5 | vni=${47}
-| ... | encap-vrf-id=${0}
-| &{vxlan_settings_ipv6}= | src=10::10 | dst=10::11 | vni=${88}
-| ... | encap-vrf-id=${0}
-| &{vxlan_settings_ipv6_long}= | src=10:0:0:0:0:0:0:10 | dst=10:0:0:0:0:0:0:11
-| ... | vni=${88} | encap-vrf-id=${0}
-
-*** Settings ***
-| Resource | resources/libraries/robot/default.robot
-| Resource | resources/libraries/robot/honeycomb/honeycomb.robot
-| Resource | resources/libraries/robot/honeycomb/interfaces.robot
-| Resource | resources/libraries/robot/honeycomb/vxlan.robot
-# import additional VxLAN settings from resource file
-| Variables | resources/test_data/honeycomb/vxlan.py
-| ...
-| Force Tags | HC_FUNC
-| ...
-| Suite Setup | Set Up Honeycomb Functional Test Suite | ${node}
-| ...
-| Suite Teardown | Tear Down Honeycomb Functional Test Suite | ${node}
-| ...
-| Documentation | *Honeycomb VxLAN management test suite.*
-
-*** Test Cases ***
-| TC01: Honeycomb configures VxLAN tunnel
-| | [Documentation] | Check if Honeycomb API can configure VxLAN settings.
-| | ...
-| | Given VxLAN Operational Data From Honeycomb Should Be empty
-| | ... | ${node} | ${vx_interface}
-| | And VxLAN Operational Data From VAT Should Be empty | ${node}
-| | When Honeycomb sets interface VxLAN configuration
-| | ... | ${node} | ${vx_interface} | ${vxlan_settings}
-| | Then VxLAN Operational Data From Honeycomb Should Be
-| | ... | ${node} | ${vx_interface} | ${vxlan_settings}
-| | And VxLAN Operational Data From VAT Should Be
-| | ... | ${node} | ${vxlan_settings}
-| | ${vxlan_index}= | Get interface index from oper data
-| | ... | ${node} | ${vx_interface}
-| | Set Suite Variable | ${vxlan_index}
-
-| TC02: Honeycomb disables VxLAN tunnel
-| | [Documentation] | Check if Honeycomb API can reset VxLAN configuration.
-| | ...
-| | Given VxLAN Operational Data From Honeycomb Should Be
-| | ... | ${node} | ${vx_interface} | ${vxlan_settings}
-| | And Honeycomb should not show disabled interface in oper data
-| | ... | ${node} | ${vxlan_index}
-| | And VxLAN Operational Data From VAT Should Be
-| | ... | ${node} | ${vxlan_settings}
-| | When Honeycomb removes VxLAN tunnel settings | ${node} | ${vx_interface}
-| | Then VxLAN Operational Data From Honeycomb Should Be empty
-| | ... | ${node} | ${vx_interface}
-| | And Honeycomb should show disabled interface in oper data
-| | ... | ${node} | ${vxlan_index}
-| | And VxLAN Operational Data From VAT Should Be empty | ${node}
-
-| TC03: Honeycomb can configure VXLAN tunnel after one has been disabled
-| | [Documentation] | Check if Honeycomb API can configure VxLAN settings again\
-| | ... | after previous settings have been removed.
-| | ...
-| | [Teardown] | Honeycomb removes VxLAN tunnel settings
-| | ... | ${node} | ${vx_interface}
-| | ...
-| | Given VxLAN Operational Data From Honeycomb Should Be empty
-| | ... | ${node} | ${vx_interface}
-| | And Honeycomb should show disabled interface in oper data
-| | ... | ${node} | ${vxlan_index}
-| | And VxLAN Operational Data From VAT Should Be empty | ${node}
-| | When Honeycomb sets interface VxLAN configuration
-| | ... | ${node} | ${vx_interface} | ${vxlan_settings2}
-| | Then VxLAN Operational Data From Honeycomb Should Be
-| | ... | ${node} | ${vx_interface} | ${vxlan_settings2}
-| | And Honeycomb should not show disabled interface in oper data
-| | ... | ${node} | ${vxlan_index}
-| | And VxLAN Operational Data From VAT Should Be
-| | ... | ${node} | ${vxlan_settings2}
-
-| TC04: Honeycomb does not set VxLAN configuration on another interface type
-| | [Documentation] | Check if Honeycomb API prevents setting VxLAN\
-| | ... | on incorrect interface.
-| | ...
-| | Given VxLAN Operational Data From Honeycomb Should Be empty
-| | ... | ${node} | ${interface}
-| | And VxLAN Operational Data From VAT Should Be empty | ${node}
-| | When Honeycomb fails setting VxLan on different interface type
-| | ... | ${node} | ${interface} | ${vxlan_settings2}
-| | Then VxLAN Operational Data From Honeycomb Should Be empty
-| | ... | ${node} | ${interface}
-| | And VxLAN Operational Data From VAT Should Be empty
-| | ... | ${node}
-
-| TC05: Honeycomb does not set invalid VxLAN configuration
-| | [Documentation] | Check if Honeycomb API prevents setting incorrect VxLAN\
-| | ... | settings.
-| | ...
-| | Given VxLAN Operational Data From Honeycomb Should Be empty
-| | ... | ${node} | ${vx_interface}
-| | And VxLAN Operational Data From VAT Should Be empty | ${node}
-| | When Honeycomb fails setting invalid VxLAN configuration
-| | ... | ${node} | ${vx_interface} | ${vxlan_invalid}
-| | Then VxLAN Operational Data From Honeycomb Should Be empty
-| | ... | ${node} | ${vx_interface}
-
-| TC06: Honeycomb configures VxLAN tunnel with ipv6
-| | [Documentation] | Check if Honeycomb API can configure VxLAN with\
-| | ... | ipv6 settings.
-| | ...
-| | [Teardown] | Honeycomb removes VxLAN tunnel settings
-| | ... | ${node} | ${vx_interface}
-| | ...
-| | Given VxLAN Operational Data From Honeycomb Should Be empty
-| | ... | ${node} | ${vx_interface}
-| | And VxLAN Operational Data From VAT Should Be empty | ${node}
-| | When Honeycomb sets interface VxLAN configuration
-| | ... | ${node} | ${vx_interface} | ${vxlan_settings_ipv6}
-| | Then VxLAN Operational Data From Honeycomb Should Be
-| | ... | ${node} | ${vx_interface} | ${vxlan_settings_ipv6_long}
-| | And VxLAN Operational Data From VAT Should Be
-| | ... | ${node} | ${vxlan_settings_ipv6}