CSIT-687: Directory structure reorganization

Change-Id: I772c9e214be2461adf58124998d272e7d795220f
Signed-off-by: Tibor Frank <tifrank@cisco.com>
Signed-off-by: Maciek Konstantynowicz <mkonstan@cisco.com>

1 files changed, 0 insertions, 168 deletions

diff --git a/tests/func/honeycomb/mgmt-cfg-vxlangpe-apihc-apivat-func.robot b/tests/func/honeycomb/mgmt-cfg-vxlangpe-apihc-apivat-func.robot
deleted file mode 100644
index 9f1cd86548..0000000000
--- a/tests/func/honeycomb/mgmt-cfg-vxlangpe-apihc-apivat-func.robot
+++ /dev/null
@@ -1,168 +0,0 @@
-# Copyright (c) 2016 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Variables ***
-# Interface to run tests on.
-| ${interface}= | ${node['interfaces']['port1']['name']}
-
-# Parameters to be set on existing interface
-| ${vxlan_gpe_existing_if}= | ${interface}
-| &{vxlan_gpe_base_wrong_interface_settings}=
-| ... | name=${vxlan_gpe_existing_if}
-| ... | type=iana-if-type:ethernetCsmacd
-| ... | description=for testing purposes
-| ... | enabled=true
-| ... | link-up-down-trap-enable=enabled
-| &{vxlan_gpe_wrong_interface_settings}=
-| ... | local=192.168.50.77
-| ... | remote=192.168.50.72
-| ... | vni=${9}
-| ... | next-protocol=wrong_ipv4
-| ... | encap-vrf-id=${0}
-| ... | decap-vrf-id=${0}
-
-*** Settings ***
-| Resource | resources/libraries/robot/default.robot
-| Resource | resources/libraries/robot/honeycomb/honeycomb.robot
-| Resource | resources/libraries/robot/honeycomb/interfaces.robot
-| Resource | resources/libraries/robot/honeycomb/vxlan_gpe.robot
-# Import additional VxLAN GPE settings from resource file
-| Variables | resources/test_data/honeycomb/vxlan_gpe.py
-| ...
-| Documentation | *Honeycomb VxLAN-GPE management test suite.*
-| ...
-| Suite Setup | Set Up Honeycomb Functional Test Suite | ${node}
-| ...
-| Suite Teardown | Tear Down Honeycomb Functional Test Suite | ${node}
-| ...
-# Disabled due to VPP-875: Configuring VxLAN GPE tunnel crashes VPP
-#| Force Tags | HC_FUNC
-
-*** Test Cases ***
-| TC01: Honeycomb creates VxLAN GPE tunnel
-| | [Documentation] | Check if Honeycomb API can configure a VxLAN GPE tunnel.
-| | ...
-| | Given interface Operational Data From Honeycomb Should Be empty
-| | ... | ${node} | ${vxlan_gpe_if1}
-| | And interface Operational Data From VAT Should Be empty
-| | ... | ${node} | ${vxlan_gpe_if1}
-| | When Honeycomb creates VxLAN GPE interface
-| | ... | ${node} | ${vxlan_gpe_if1}
-| | ... | ${vxlan_gpe_base_settings} | ${vxlan_gpe_settings}
-| | Then VxLAN GPE Operational Data From Honeycomb Should Be
-| | ... | ${node} | ${vxlan_gpe_if1}
-| | ... | ${vxlan_gpe_base_settings} | ${vxlan_gpe_settings}
-| | And VxLAN GPE Operational Data From VAT Should Be
-| | ... | ${node} | ${vxlan_gpe_if1} | ${vxlan_gpe_settings}
-| | And VxLAN GPE Interface indices from Honeycomb and VAT should correspond
-| | ... | ${node} | ${vxlan_gpe_if1}
-
-| TC02: Honeycomb removes VxLAN GPE tunnel
-| | [Documentation] | Check if Honeycomb API can remove VxLAN GPE tunnel.
-| | ...
-| | Given VxLAN GPE Operational Data From Honeycomb Should Be
-| | ... | ${node} | ${vxlan_gpe_if1}
-| | ... | ${vxlan_gpe_base_settings} | ${vxlan_gpe_settings}
-| | VxLAN GPE Operational Data From VAT Should Be
-| | ... | ${node} | ${vxlan_gpe_if1} | ${vxlan_gpe_settings}
-| | When Honeycomb removes VxLAN GPE interface
-| | ... | ${node} | ${vxlan_gpe_if1}
-| | Then VxLAN GPE Operational Data From Honeycomb Should Be empty
-| | ... | ${node} | ${vxlan_gpe_if1}
-| | And VxLAN GPE Operational Data From VAT Should Be empty
-| | ... | ${node}
-
-| TC03: Honeycomb sets wrong interface type while creating VxLAN GPE tunnel
-| | [Documentation] | Check if Honeycomb refuses to create a VxLAN GPE tunnel\
-| | ... | with a wrong interface type set.
-| | ...
-| | Given interface Operational Data From Honeycomb Should Be empty
-| | ... | ${node} | ${vxlan_gpe_if2}
-| | And interface Operational Data From VAT Should Be empty
-| | ... | ${node} | ${vxlan_gpe_if2}
-| | When Honeycomb fails to create VxLAN GPE interface
-| | ... | ${node} | ${vxlan_gpe_if2}
-| | ... | ${vxlan_gpe_wrong_type_base_settings} | ${vxlan_gpe_settings}
-| | Then interface Operational Data From Honeycomb Should Be empty
-| | ... | ${node} | ${vxlan_gpe_if2}
-| | And interface Operational Data From VAT Should Be empty
-| | ... | ${node} | ${vxlan_gpe_if2}
-
-| TC04: Honeycomb sets wrong protocol while creating VxLAN GPE tunnel
-| | [Documentation] | Check if Honeycomb refuses to create a VxLAN GPE tunnel\
-| | ... | with a wrong next-protocol set.
-| | ...
-| | Given interface Operational Data From Honeycomb Should Be empty
-| | ... | ${node} | ${vxlan_gpe_if3}
-| | And interface Operational Data From VAT Should Be empty
-| | ... | ${node} | ${vxlan_gpe_if3}
-| | When Honeycomb fails to create VxLAN GPE interface
-| | ... | ${node} | ${vxlan_gpe_if3}
-| | ... | ${vxlan_gpe_wrong_protocol_base_settings}
-| | ... | ${vxlan_gpe_wrong_protocol_settings}
-| | Then interface Operational Data From Honeycomb Should Be empty
-| | ... | ${node} | ${vxlan_gpe_if3}
-| | And interface Operational Data From VAT Should Be empty
-| | ... | ${node} | ${vxlan_gpe_if3}
-
-| TC05: Honeycomb sets VxLAN GPE tunnel on existing interface with wrong type
-| | [Documentation] | Check if Honeycomb refuses to create a VxLAN GPE tunnel\
-| | ... | on existing interface with wrong type.
-| | ...
-| | Given VxLAN GPE Operational Data From VAT Should Be empty
-| | ... | ${node}
-| | When Honeycomb fails to create VxLAN GPE interface
-| | ... | ${node} | ${vxlan_gpe_existing_if}
-| | ... | ${vxlan_gpe_base_wrong_interface_settings}
-| | ... | ${vxlan_gpe_wrong_interface_settings}
-| | Then VxLAN GPE Operational Data From VAT Should Be empty
-| | ... | ${node}
-
-| TC06: Honeycomb creates VxLAN GPE tunnel with ipv6
-| | [Documentation] | Check if Honeycomb API can configure a VxLAN GPE tunnel\
-| | ... | with IPv6 addresses.
-| | ...
-| | Given VxLAN GPE Operational Data From VAT Should Be empty
-| | ... | ${node}
-| | And VxLAN GPE Operational Data From Honeycomb Should Be empty
-| | ... | ${node} | ${vxlan_gpe_if5}
-| | When Honeycomb creates VxLAN GPE interface
-| | ... | ${node} | ${vxlan_gpe_if5}
-| | ... | ${vxlan_gpe_base_ipv6_settings} | ${vxlan_gpe_ipv6_settings}
-| | Then VxLAN GPE Operational Data From Honeycomb Should Be
-| | ... | ${node} | ${vxlan_gpe_if5}
-| | ... | ${vxlan_gpe_base_ipv6_settings} | ${vxlan_gpe_ipv6_settings}
-| | And Run Keyword And Continue On Failure
-| | ... | VxLAN GPE Operational Data From VAT Should Be
-| | ... | ${node} | ${vxlan_gpe_if5} | ${vxlan_gpe_ipv6_settings}
-| | And VxLAN GPE Interface indices from Honeycomb and VAT should correspond
-| | ... | ${node} | ${vxlan_gpe_if5}
-
-| TC07: Honeycomb creates a second VxLAN GPE tunnel with ipv6
-| | [Documentation] | Check if Honeycomb API can configure another VxLAN\
-| | ... | GPE tunnel with IPv6 addresses.
-| | ...
-| | Given interface Operational Data From Honeycomb Should Be empty
-| | ... | ${node} | ${vxlan_gpe_if6}
-| | And interface Operational Data From VAT Should Be empty
-| | ... | ${node} | ${vxlan_gpe_if6}
-| | When Honeycomb creates VxLAN GPE interface
-| | ... | ${node} | ${vxlan_gpe_if6}
-| | ... | ${vxlan_gpe_base_ipv6_settings2} | ${vxlan_gpe_ipv6_settings2}
-| | Then VxLAN GPE Operational Data From Honeycomb Should Be
-| | ... | ${node} | ${vxlan_gpe_if6}
-| | ... | ${vxlan_gpe_base_ipv6_settings2} | ${vxlan_gpe_ipv6_settings2}
-| | And VxLAN GPE Operational Data From VAT Should Be
-| | ... | ${node} | ${vxlan_gpe_if6} | ${vxlan_gpe_ipv6_settings2}
-| | And VxLAN GPE Interface indices from Honeycomb and VAT should correspond
-| | ... | ${node} | ${vxlan_gpe_if6}