CSIT-687: Directory structure reorganization

Change-Id: I772c9e214be2461adf58124998d272e7d795220f
Signed-off-by: Tibor Frank <tifrank@cisco.com>
Signed-off-by: Maciek Konstantynowicz <mkonstan@cisco.com>

1 files changed, 0 insertions, 169 deletions

diff --git a/tests/func/honeycomb/mgmt-statepersist-apihc-func.robot b/tests/func/honeycomb/mgmt-statepersist-apihc-func.robot
deleted file mode 100644
index 4277c91a4e..0000000000
--- a/tests/func/honeycomb/mgmt-statepersist-apihc-func.robot
+++ /dev/null
@@ -1,169 +0,0 @@
-# Copyright (c) 2016 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Variables***
-# Interface to run tests on.
-| ${interface}= | ${node['interfaces']['port1']['name']}
-
-*** Settings ***
-| Resource | resources/libraries/robot/default.robot
-| Resource | resources/libraries/robot/honeycomb/persistence.robot
-| Resource | resources/libraries/robot/honeycomb/interfaces.robot
-| Resource | resources/libraries/robot/honeycomb/bridge_domain.robot
-| Resource | resources/libraries/robot/honeycomb/l2_fib.robot
-| ...
-| Suite Setup | Run Keywords
-| ... | Configure Persistence | ${node} | enable | AND
-| ... | Restart Honeycomb And VPP And Clear Persisted Configuration | ${node}
-| ...
-| Suite Teardown | Configure Persistence | ${node} | disable
-| ...
-| Force Tags | HC_PERSIST | HC_REST_ONLY
-| ...
-| Documentation | *Honeycomb configuration persistence test suite.*
-
-*** Test Cases ***
-# multi-feature cases
-# ===================
-| TC01: Honeycomb persists configuration through restart of both Honeycomb and VPP
-| | [Documentation] | Checks if Honeycomb maintains configuration after both\
-| | ... | Restart Honeycomb and VPP.
-| | ...
-# Failing due to HC2VPP-47
-| | [Tags] | HC_FUNC | EXPECTED_FAILING
-| | ...
-| | [Teardown]
-| | ... | Restart Honeycomb And VPP And Clear Persisted Configuration | ${node}
-| | ...
-| | Given Multi-Feature Persistence test configuration | ${node} | ${interface}
-| | And Multi-Feature persistence Test Verification | ${node} | ${interface}
-| | And Log persisted configuration on node | ${node}
-| | When Restart Honeycomb and VPP in pesistence test | ${node}
-| | Then Multi-Feature persistence Test Verification | ${node} | ${interface}
-
-| TC02: Honeycomb reverts to defaults if persistence files are invalid
-| | [Documentation] | Checks if Honeycomb reverts to default configuration when\
-| | ... | persistence files are damaged or invalid.
-| | ...
-| | [Tags] | HC_FUNC
-| | ...
-| | [Teardown]
-| | ... | Restart Honeycomb And VPP And Clear Persisted Configuration | ${node}
-| | ...
-| | Given Multi-Feature Persistence test configuration | ${node} | ${interface}
-| | And Multi-Feature persistence Test Verification | ${node} | ${interface}
-| | When Persistence file is damaged during restart | ${node}
-| | Then Honeycomb and VPP should have default configuration | ${node}
-
-| TC03: Honeycomb persists configuration through restart of Honeycomb
-| | [Documentation] | Checks if Honeycomb maintains configuration after it\
-| | ... | is restarted.
-| | ...
-| | [Teardown]
-| | ... | Restart Honeycomb And VPP And Clear Persisted Configuration | ${node}
-| | ...
-| | Given Multi-Feature Persistence test configuration | ${node} | ${interface}
-| | And Multi-Feature persistence Test Verification | ${node} | ${interface}
-| | And Log persisted configuration on node | ${node}
-| | When Restart Honeycomb | ${node}
-| | Then Multi-Feature persistence Test Verification | ${node} | ${interface}
-
-| TC04: Honeycomb persists configuration through restart of VPP
-| | [Documentation] | Checks if Honeycomb updates VPP settings after VPP is\
-| | ... | restarted.
-| | ...
-| | [Teardown]
-| | ... | Restart Honeycomb And VPP And Clear Persisted Configuration | ${node}
-| | ...
-| | Given Multi-Feature Persistence test configuration | ${node} | ${interface}
-| | And Multi-Feature persistence Test Verification | ${node} | ${interface}
-| | And Log persisted configuration on node | ${node}
-| | When Restart VPP | ${node}
-| | Then Multi-Feature persistence Test Verification | ${node} | ${interface}
-
-# single-feature cases
-# ====================
-
-| TC05: Persist configuration of IP addresses and neighbors - HC and VPP restart
-| | [Documentation] | Verify persistence of interface state, IPv4 address
-| | ... | and neighbor entries through restart of both Honeycomb and VPP.
-| | ...
-| | [Teardown]
-| | ... | Restart Honeycomb And VPP And Clear Persisted Configuration | ${node}
-| | ...
-| | Given Interface Persistence Setup | ${node}
-| | And Interface Persistence Check | ${node}
-| | When Restart Honeycomb and VPP in pesistence test | ${node}
-| | Then Interface Persistence Check | ${node}
-
-| TC06: Persist configuration of IP addresses and neighbors - HC restart
-| | [Documentation] | Verify persistence of interface state, IPv4 address
-| | ... | and neighbor entries through restart of Honeycomb.
-| | ...
-| | [Teardown]
-| | ... | Restart Honeycomb And VPP And Clear Persisted Configuration | ${node}
-| | ...
-| | Given Interface Persistence Setup | ${node}
-| | And Interface Persistence Check | ${node}
-| | When Restart Honeycomb | ${node}
-| | Then Interface Persistence Check | ${node}
-
-| TC07: Persist configuration of IP addresses and neighbors - VPP restart
-| | [Documentation] | Verify persistence of interface state, IPv4 address
-| | ... | and neighbor entries through restart of VPP.
-| | ...
-| | [Teardown]
-| | ... | Restart Honeycomb And VPP And Clear Persisted Configuration | ${node}
-| | ...
-| | Given Interface Persistence Setup | ${node}
-| | And Interface Persistence Check | ${node}
-| | When Restart VPP | ${node}
-| | Then Interface Persistence Check | ${node}
-
-| TC08: Honeycomb persists configuration of bridge domains - HC and VPP restart
-| | [Documentation] | Verify persistence of bridge domain, L2-FIB entry
-| | ... | and Bridge domain Operational Interface Assignment through restart
-| | ... | of both Honeycomb and VPP.
-| | ...
-| | [Teardown]
-| | ... | Restart Honeycomb And VPP And Clear Persisted Configuration | ${node}
-| | ...
-| | Given Bridge Domain Persistence Setup | ${node}
-| | When Restart Honeycomb and VPP in pesistence test | ${node}
-| | Then Bridge Domain Persistence Check | ${node}
-
-| TC09: Honeycomb persists configuration of bridge domains - HC restart
-| | [Documentation] | Verify persistence of bridge domain, L2-FIB entry
-| | ... | and Bridge domain Operational Interface Assignment through restart
-| | ... | of Honeycomb.
-| | ...
-| | [Teardown]
-| | ... | Restart Honeycomb And VPP And Clear Persisted Configuration | ${node}
-| | ...
-| | Given Bridge Domain Persistence Setup | ${node}
-| | When Restart Honeycomb | ${node}
-| | Then Bridge Domain Persistence Check | ${node}
-
-| TC10: Honeycomb persists configuration of bridge domains - VPP restart
-| | [Documentation] | Verify persistence of bridge domain, L2-FIB entry
-| | ... | and Bridge domain Operational Interface Assignment through restart
-| | ... | of VPP.
-| | ...
-| | [Teardown]
-| | ... | Restart Honeycomb And VPP And Clear Persisted Configuration | ${node}
-| | ...
-| | Given Bridge Domain Persistence Setup | ${node}
-| | When Restart VPP | ${node}
-| | Then Bridge Domain Persistence Check | ${node}
-
-#TODO: All other features