Remove _base from test suite dir names

Change-Id: I2e495f99a88dedc47f64efcc14722bb629a25f02
Signed-off-by: Jan Gelety <jgelety@cisco.com>

1 files changed, 144 insertions, 0 deletions

diff --git a/tests/func/iacl/eth2p-eth-l2xcbase-iaclbase-func.robot b/tests/func/iacl/eth2p-eth-l2xcbase-iaclbase-func.robot
new file mode 100644
index 0000000000..1914130bac
--- /dev/null
+++ b/tests/func/iacl/eth2p-eth-l2xcbase-iaclbase-func.robot
@@ -0,0 +1,144 @@
+# Copyright (c) 2016 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/default.robot
+| Resource | resources/libraries/robot/counters.robot
+| Resource | resources/libraries/robot/interfaces.robot
+| Resource | resources/libraries/robot/testing_path.robot
+| Resource | resources/libraries/robot/l2_xconnect.robot
+| Resource | resources/libraries/robot/l2_traffic.robot
+| Library | resources.libraries.python.Classify.Classify
+| Library | resources.libraries.python.Trace
+| Force Tags | HW_ENV | VM_ENV | 3_NODE_SINGLE_LINK_TOPO
+| Test Setup | Func Test Setup
+| Test Teardown | Func Test Teardown
+| Documentation | *Ingress ACL test cases*
+| ...
+| ... | *[Top] Network Topologies:* TG - DUT1 - DUT2 - TG
+| ... |        with one link between the nodes.
+| ... | *[Cfg] DUT configuration:* DUT2 is configured with L2 Cross connect.
+| ... |        DUT1 is configured with iACL classification on link to TG,
+| ... | *[Ver] TG verification:* Test ICMPv4 Echo Request packets are sent
+| ... |        in one direction by TG on link to DUT1 and received on TG link
+| ... |        to DUT2. On receive TG verifies if packets are dropped.
+
+*** Variables ***
+| ${l2_table}= | l2
+
+*** Test Cases ***
+| TC01: DUT with iACL MAC src-addr drops matching pkts
+| | [Documentation]
+| | ... | [Top] TG-DUT1-DUT2-TG.
+| | ... | [Cfg] On DUT1 add source MAC address to classify table with 'deny'.
+| | ... | [Ver] Make TG verify matching packets are dropped.
+| | Given Path for 3-node testing is set
+| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
+| | And Interfaces in 3-node path are up
+| | And L2 setup xconnect on DUT
+| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_tg}
+| | And L2 setup xconnect on DUT
+| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_tg}
+| | Then Send and receive ICMP Packet
+| | ... | ${tg_node} | ${tg_to_dut1} | ${tg_to_dut2}
+| | ${table_index} | ${skip_n} | ${match_n}=
+| | ... | When Vpp Creates Classify Table L2 | ${dut1_node} | src
+| | And Vpp Configures Classify Session L2
+| | ... | ${dut1_node} | deny | ${table_index} | ${skip_n} | ${match_n}
+| | ... | src | ${tg_to_dut1_mac}
+| | And Vpp Enable Input ACL Interface
+| | ... | ${dut1_node} | ${dut1_to_tg} | ${l2_table} | ${table_index}
+| | Then Send and receive ICMP Packet should fail
+| | ... | ${tg_node} | ${tg_to_dut1} | ${tg_to_dut2}
+
+| TC02: DUT with iACL MAC dst-addr drops matching pkts
+| | [Documentation]
+| | ... | [Top] TG-DUT1-DUT2-TG.
+| | ... | [Cfg] On DUT1 add destination MAC address to classify
+| | ... |       table with 'deny'.
+| | ... | [Ver] Make TG verify matching packets are dropped.
+| | Given Path for 3-node testing is set
+| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
+| | And Interfaces in 3-node path are up
+| | And L2 setup xconnect on DUT
+| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_tg}
+| | And L2 setup xconnect on DUT
+| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_tg}
+| | Then Send and receive ICMP Packet
+| | ... | ${tg_node} | ${tg_to_dut1} | ${tg_to_dut2}
+| | ${table_index} | ${skip_n} | ${match_n}=
+| | ... | When Vpp Creates Classify Table L2 | ${dut1_node} | dst
+| | And Vpp Configures Classify Session L2
+| | ... | ${dut1_node} | deny | ${table_index} | ${skip_n} | ${match_n}
+| | ... | dst | ${tg_to_dut2_mac}
+| | And Vpp Enable Input ACL Interface
+| | ... | ${dut1_node} | ${dut1_to_tg} | ${l2_table} | ${table_index}
+| | Then Send and receive ICMP Packet should fail
+| | ... | ${tg_node} | ${tg_to_dut1} | ${tg_to_dut2}
+
+| TC03: DUT with iACL MAC src-addr and dst-addr drops matching pkts
+| | [Documentation]
+| | ... | [Top] TG-DUT1-DUT2-TG.
+| | ... | [Cfg] On DUT1 add source and destination MAC address to classify
+| | ... |       table with 'deny'.
+| | ... | [Ver] Make TG verify matching packets are dropped.
+| | Given Path for 3-node testing is set
+| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
+| | And Interfaces in 3-node path are up
+| | And L2 setup xconnect on DUT
+| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_tg}
+| | And L2 setup xconnect on DUT
+| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_tg}
+| | Then Send and receive ICMP Packet
+| | ... | ${tg_node} | ${tg_to_dut1} | ${tg_to_dut2}
+| | ${table_index_1} | ${skip_n_1} | ${match_n_1}=
+| | ... | When Vpp Creates Classify Table L2 | ${dut1_node} | src
+| | And Vpp Configures Classify Session L2
+| | ... | ${dut1_node} | deny | ${table_index_1} | ${skip_n_1} | ${match_n_1}
+| | ... | src | ${tg_to_dut1_mac}
+| | ${table_index_2} | ${skip_n_2} | ${match_n_2}=
+| | ... | When Vpp Creates Classify Table L2 | ${dut1_node} | dst
+| | And Vpp Configures Classify Session L2
+| | ... | ${dut1_node} | deny | ${table_index_2} | ${skip_n_2} | ${match_n_2}
+| | ... | dst | ${tg_to_dut1_mac}
+| | And Vpp Enable Input ACL Interface
+| | ... | ${dut1_node} | ${dut1_to_tg} | ${l2_table} | ${table_index_1}
+| | And Vpp Enable Input ACL Interface
+| | ... | ${dut1_node} | ${dut1_to_tg} | ${l2_table} | ${table_index_2}
+| | Then Send and receive ICMP Packet should fail
+| | ... | ${tg_node} | ${tg_to_dut1} | ${tg_to_dut2}
+
+| TC04: DUT with iACL EtherType drops matching pkts
+| | [Documentation]
+| | ... | [Top] TG-DUT1-DUT2-TG.
+| | ... | [Cfg] On DUT1 add EtherType IPv4(0x0800) to classify table with 'deny'.
+| | ... | [Ver] Make TG verify matching packets are dropped.
+| | Given Path for 3-node testing is set
+| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
+| | And Interfaces in 3-node path are up
+| | And L2 setup xconnect on DUT
+| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_tg}
+| | And L2 setup xconnect on DUT
+| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_tg}
+| | Then Send and receive ICMP Packet
+| | ... | ${tg_node} | ${tg_to_dut1} | ${tg_to_dut2}
+| | ${table_index} | ${skip_n} | ${match_n}=
+| | ... | When Vpp Creates Classify Table Hex
+| | ... | ${dut1_node} | 000000000000000000000000ffff
+| | And Vpp Configures Classify Session Hex
+| | ... | ${dut1_node} | deny | ${table_index} | ${skip_n} | ${match_n}
+| | ... | 0000000000000000000000000800
+| | And Vpp Enable Input ACL Interface
+| | ... | ${dut1_node} | ${dut1_to_tg} | ${l2_table} | ${table_index}
+| | Then Send and receive ICMP Packet should fail
+| | ... | ${tg_node} | ${tg_to_dut1} | ${tg_to_dut2}