Remove _base from test suite dir names

Change-Id: I2e495f99a88dedc47f64efcc14722bb629a25f02
Signed-off-by: Jan Gelety <jgelety@cisco.com>

1 files changed, 82 insertions, 0 deletions

diff --git a/tests/func/ipv4/eth2p-ethip4-ip4base-ip4arp-func.robot b/tests/func/ipv4/eth2p-ethip4-ip4base-ip4arp-func.robot
new file mode 100644
index 0000000000..0950610559
--- /dev/null
+++ b/tests/func/ipv4/eth2p-ethip4-ip4base-ip4arp-func.robot
@@ -0,0 +1,82 @@
+# Copyright (c) 2016 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/default.robot
+| Resource | resources/libraries/robot/counters.robot
+| Resource | resources/libraries/robot/interfaces.robot
+| Resource | resources/libraries/robot/testing_path.robot
+| Resource | resources/libraries/robot/ipv4.robot
+| Resource | resources/libraries/robot/l2_xconnect.robot
+| Resource | resources/libraries/robot/traffic.robot
+| Library | resources.libraries.python.Trace
+| Force Tags | HW_ENV | VM_ENV | 3_NODE_SINGLE_LINK_TOPO
+| Test Setup | Func Test Setup
+| Test Teardown | Func Test Teardown
+| Documentation | *IPv4 ARP test cases*
+| ...
+| ... | RFC826 ARP: Eth-IPv4 and Eth-ARP on links TG-DUT1, TG-DUT2, DUT1-DUT2:
+| ... | IPv4 ARP tests use 3-node topology TG - DUT1 - DUT2 - TG with one link
+| ... | between the nodes. DUT1 and DUT2 are configured with IPv4 routing and
+| ... | static routes. DUT ARP functionality is tested by making TG send ICMPv4
+| ... | Echo Requests towards its other interface via DUT1 and DUT2.
+
+*** Variables ***
+| ${dut1_to_tg_ip}= | 192.168.1.1
+| ${dut1_to_dut2_ip}= | 192.168.2.1
+| ${dut1_to_dut2_ip_GW}= | 192.168.2.2
+| ${test_dst_ip}= | 32.0.0.1
+| ${test_src_ip}= | 16.0.0.1
+| ${prefix_length}= | 24
+
+*** Test Cases ***
+| TC01: DUT sends ARP Request for unresolved locally connected IPv4 address
+| | [Documentation]
+| | ... | Make TG send test packet destined to IPv4 address of its other\
+| | ... | interface connected to DUT2. Make TG verify DUT2 sends ARP
+| | ... | Request for locally connected TG IPv4 address.
+| | Given Path for 3-node testing is set
+| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
+| | And Interfaces in 3-node path are up
+| | And L2 setup xconnect on DUT
+| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_tg}
+| | When Set Interface Address | ${dut1_node}
+| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length}
+| | And Set Interface Address | ${dut1_node}
+| | ... | ${dut1_to_dut2} | ${dut1_to_dut2_ip} | ${prefix_length}
+| | Then Send Packet And Check ARP Request | ${tg_node}
+| | ... | ${test_src_ip} | ${dut1_to_dut2_ip_GW} | ${tg_to_dut1}
+| | ... | ${dut1_to_tg_mac} | ${tg_to_dut2} | ${dut1_to_dut2_mac}
+| | ... | ${dut1_to_dut2_ip} | ${dut1_to_dut2_ip_GW}
+
+| TC02: DUT sends ARP Request for route next hop IPv4 address
+| | [Documentation] |
+| | ... | Make TG send test packet destined to IPv4 address matching\
+| | ... | static route on DUT2. Make TG verify DUT2 sends ARP Request for
+| | ... | next hop of the static route.
+| | Given Path for 3-node testing is set
+| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
+| | And Interfaces in 3-node path are up
+| | And L2 setup xconnect on DUT
+| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_tg}
+| | When Set Interface Address | ${dut1_node}
+| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length}
+| | And Set Interface Address | ${dut1_node}
+| | ... | ${dut1_to_dut2} | ${dut1_to_dut2_ip} | ${prefix_length}
+| | And Vpp Route Add
+| | ... | ${dut1_node} | ${test_dst_ip} | ${prefix_length}
+| | ... | ${dut1_to_dut2_ip_GW} | ${dut1_to_dut2} | resolve_attempts=${NONE}
+| | Then Send Packet And Check ARP Request | ${tg_node}
+| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1}
+| | ... | ${dut1_to_tg_mac} | ${tg_to_dut2} | ${dut1_to_dut2_mac}
+| | ... | ${dut1_to_dut2_ip} | ${dut1_to_dut2_ip_GW}