diff options
author | 2017-01-25 13:32:01 +0100 | |
---|---|---|
committer | 2017-01-25 13:32:01 +0100 | |
commit | 5814118adfec1cf88603d5b8c0015a0a1d032942 (patch) | |
tree | 55279cdc3cb15174c0bceb1d55fdb97685691a86 /tests/func/ipv4/eth2p-ethip4-ip4base-ip4arp-func.robot | |
parent | e507c9603efd1a9377ff835d108e51ddb9a0b5c3 (diff) |
Remove _base from test suite dir names
Change-Id: I2e495f99a88dedc47f64efcc14722bb629a25f02
Signed-off-by: Jan Gelety <jgelety@cisco.com>
Diffstat (limited to 'tests/func/ipv4/eth2p-ethip4-ip4base-ip4arp-func.robot')
-rw-r--r-- | tests/func/ipv4/eth2p-ethip4-ip4base-ip4arp-func.robot | 82 |
1 files changed, 82 insertions, 0 deletions
diff --git a/tests/func/ipv4/eth2p-ethip4-ip4base-ip4arp-func.robot b/tests/func/ipv4/eth2p-ethip4-ip4base-ip4arp-func.robot new file mode 100644 index 0000000000..0950610559 --- /dev/null +++ b/tests/func/ipv4/eth2p-ethip4-ip4base-ip4arp-func.robot @@ -0,0 +1,82 @@ +# Copyright (c) 2016 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/default.robot +| Resource | resources/libraries/robot/counters.robot +| Resource | resources/libraries/robot/interfaces.robot +| Resource | resources/libraries/robot/testing_path.robot +| Resource | resources/libraries/robot/ipv4.robot +| Resource | resources/libraries/robot/l2_xconnect.robot +| Resource | resources/libraries/robot/traffic.robot +| Library | resources.libraries.python.Trace +| Force Tags | HW_ENV | VM_ENV | 3_NODE_SINGLE_LINK_TOPO +| Test Setup | Func Test Setup +| Test Teardown | Func Test Teardown +| Documentation | *IPv4 ARP test cases* +| ... +| ... | RFC826 ARP: Eth-IPv4 and Eth-ARP on links TG-DUT1, TG-DUT2, DUT1-DUT2: +| ... | IPv4 ARP tests use 3-node topology TG - DUT1 - DUT2 - TG with one link +| ... | between the nodes. DUT1 and DUT2 are configured with IPv4 routing and +| ... | static routes. DUT ARP functionality is tested by making TG send ICMPv4 +| ... | Echo Requests towards its other interface via DUT1 and DUT2. + +*** Variables *** +| ${dut1_to_tg_ip}= | 192.168.1.1 +| ${dut1_to_dut2_ip}= | 192.168.2.1 +| ${dut1_to_dut2_ip_GW}= | 192.168.2.2 +| ${test_dst_ip}= | 32.0.0.1 +| ${test_src_ip}= | 16.0.0.1 +| ${prefix_length}= | 24 + +*** Test Cases *** +| TC01: DUT sends ARP Request for unresolved locally connected IPv4 address +| | [Documentation] +| | ... | Make TG send test packet destined to IPv4 address of its other\ +| | ... | interface connected to DUT2. Make TG verify DUT2 sends ARP +| | ... | Request for locally connected TG IPv4 address. +| | Given Path for 3-node testing is set +| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} +| | And Interfaces in 3-node path are up +| | And L2 setup xconnect on DUT +| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_tg} +| | When Set Interface Address | ${dut1_node} +| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length} +| | And Set Interface Address | ${dut1_node} +| | ... | ${dut1_to_dut2} | ${dut1_to_dut2_ip} | ${prefix_length} +| | Then Send Packet And Check ARP Request | ${tg_node} +| | ... | ${test_src_ip} | ${dut1_to_dut2_ip_GW} | ${tg_to_dut1} +| | ... | ${dut1_to_tg_mac} | ${tg_to_dut2} | ${dut1_to_dut2_mac} +| | ... | ${dut1_to_dut2_ip} | ${dut1_to_dut2_ip_GW} + +| TC02: DUT sends ARP Request for route next hop IPv4 address +| | [Documentation] | +| | ... | Make TG send test packet destined to IPv4 address matching\ +| | ... | static route on DUT2. Make TG verify DUT2 sends ARP Request for +| | ... | next hop of the static route. +| | Given Path for 3-node testing is set +| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} +| | And Interfaces in 3-node path are up +| | And L2 setup xconnect on DUT +| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_tg} +| | When Set Interface Address | ${dut1_node} +| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length} +| | And Set Interface Address | ${dut1_node} +| | ... | ${dut1_to_dut2} | ${dut1_to_dut2_ip} | ${prefix_length} +| | And Vpp Route Add +| | ... | ${dut1_node} | ${test_dst_ip} | ${prefix_length} +| | ... | ${dut1_to_dut2_ip_GW} | ${dut1_to_dut2} | resolve_attempts=${NONE} +| | Then Send Packet And Check ARP Request | ${tg_node} +| | ... | ${test_src_ip} | ${test_dst_ip} | ${tg_to_dut1} +| | ... | ${dut1_to_tg_mac} | ${tg_to_dut2} | ${dut1_to_dut2_mac} +| | ... | ${dut1_to_dut2_ip} | ${dut1_to_dut2_ip_GW} |