CSIT-687: Directory structure reorganization

Change-Id: I772c9e214be2461adf58124998d272e7d795220f
Signed-off-by: Tibor Frank <tifrank@cisco.com>
Signed-off-by: Maciek Konstantynowicz <mkonstan@cisco.com>

1 files changed, 0 insertions, 156 deletions

diff --git a/tests/func/ipv4/eth2p-ethip4-ip4base-ip4proxyarp-func.robot b/tests/func/ipv4/eth2p-ethip4-ip4base-ip4proxyarp-func.robot
deleted file mode 100644
index afe4581b16..0000000000
--- a/tests/func/ipv4/eth2p-ethip4-ip4base-ip4proxyarp-func.robot
+++ /dev/null
@@ -1,156 +0,0 @@
-# Copyright (c) 2016 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Resource | resources/libraries/robot/default.robot
-| Resource | resources/libraries/robot/interfaces.robot
-| Resource | resources/libraries/robot/testing_path.robot
-| Resource | resources/libraries/robot/ipv4.robot
-| Resource | resources/libraries/robot/traffic.robot
-| Library | resources.libraries.python.Trace
-| Library | resources.libraries.python.ProxyArp
-| Force Tags | HW_ENV | VM_ENV | 3_NODE_SINGLE_LINK_TOPO
-| Test Setup | Set up functional test
-| Test Teardown | Tear down functional test
-| Documentation | *RFC1027 Proxy ARP test cases*
-| ...
-| ... | *[Top] Network topologies:* TG-DUT1 2-node topology with
-| ... | single link between nodes.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with Proxy ARP
-| ... | *[Ver] TG verification:* Test ARP Request packet is sent
-| ... | from TG on link to DUT1; on receive TG verifies ARP reply packet
-| ... | for correctness and their IPv4 src-addr, dst-addr and MAC addresses.
-| ... | *[Ref] Applicable standard specifications:* RFC1027.
-
-*** Variables ***
-| ${tg_to_dut1_ip}= | 10.0.0.100
-| ${dut1_to_tg_ip}= | 10.0.0.1
-| ${prefix_length}= | 24
-| ${lo_ip4_addr}= | 192.168.1.2
-| ${hi_ip4_addr}= | 192.168.1.10
-| ${pass_test_ip}= | 192.168.1.5
-| ${pass_test_lo_ip}= | 192.168.1.2
-| ${pass_test_hi_ip}= | 192.168.1.10
-| ${fail_test_lo_ip}= | 192.168.1.1
-| ${fail_test_hi_ip}= | 192.168.1.11
-
-*** Test Cases ***
-| TC01: DUT sends ARP reply on behalf of another machine from the IP range
-| | [Documentation]
-| | ... | [Top] TG-DUT1.
-| | ... | [Ref] RFC1027.
-| | ... | [Cfg] On DUT1 configure interface IPv4 address and proxy ARP
-| | ... | for IP range.
-| | ... | [Ver] Make TG send ARP request to DUT1 interface,
-| | ... | verify if DUT1 sends correct ARP reply on behalf of machine which
-| | ... | IP is in range.
-| | Given Configure path in 3-node circular topology
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
-| | And Set interfaces in 3-node circular topology up
-| | ${dut1_to_tg_name}= | Get interface name | ${dut1_node} | ${dut1_to_tg}
-| | ${tg_to_dut1_name}= | Get interface name | ${tg_node} | ${tg_to_dut1}
-| | When Set Interface Address | ${dut1_node}
-| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length}
-| | And Vpp Add Proxy ARP | ${dut1_node} | ${lo_ip4_addr} | ${hi_ip4_addr}
-| | And Vpp Proxy ARP Interface Enable | ${dut1_node} | ${dut1_to_tg_name}
-| | Then Send ARP Request | ${tg_node} | ${tg_to_dut1_name}
-| | ...                   | ${tg_to_dut1_mac} | ${dut1_to_tg_mac}
-| | ...                   | ${tg_to_dut1_ip} | ${pass_test_ip}
-
-| TC02: DUT sends ARP reply on behalf of another machine from beginning of the IP range
-| | [Documentation]
-| | ... | [Top] TG-DUT1.
-| | ... | [Ref] RFC1027.
-| | ... | [Cfg] On DUT1 configure interface IPv4 address and proxy ARP
-| | ... | for IP range.
-| | ... | [Ver] Make TG send ARP request to DUT1 interface,
-| | ... | verify if DUT1 sends correct ARP reply on behalf of machine which
-| | ... | IP is from beginning of the IP range.
-| | Given Configure path in 3-node circular topology
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
-| | And Set interfaces in 3-node circular topology up
-| | ${dut1_to_tg_name}= | Get interface name | ${dut1_node} | ${dut1_to_tg}
-| | ${tg_to_dut1_name}= | Get interface name | ${tg_node} | ${tg_to_dut1}
-| | When Set Interface Address | ${dut1_node}
-| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length}
-| | And Vpp Add Proxy ARP | ${dut1_node} | ${lo_ip4_addr} | ${hi_ip4_addr}
-| | And Vpp Proxy ARP Interface Enable | ${dut1_node} | ${dut1_to_tg_name}
-| | Then Send ARP Request | ${tg_node} | ${tg_to_dut1_name}
-| | ...                   | ${tg_to_dut1_mac} | ${dut1_to_tg_mac}
-| | ...                   | ${tg_to_dut1_ip} | ${pass_test_lo_ip}
-
-| TC03: DUT sends ARP reply on behalf of another machine from end of the IP range
-| | [Documentation]
-| | ... | [Top] TG-DUT1.
-| | ... | [Ref] RFC1027.
-| | ... | [Cfg] On DUT1 configure interface IPv4 address and proxy ARP
-| | ... | for IP range.
-| | ... | [Ver] Make TG send ARP request to DUT1 interface,
-| | ... | verify if DUT1 sends correct ARP reply on behalf of machine which
-| | ... | IP is from end of the IP range.
-| | Given Configure path in 3-node circular topology
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
-| | And Set interfaces in 3-node circular topology up
-| | ${dut1_to_tg_name}= | Get interface name | ${dut1_node} | ${dut1_to_tg}
-| | ${tg_to_dut1_name}= | Get interface name | ${tg_node} | ${tg_to_dut1}
-| | When Set Interface Address | ${dut1_node}
-| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length}
-| | And Vpp Add Proxy ARP | ${dut1_node} | ${lo_ip4_addr} | ${hi_ip4_addr}
-| | And Vpp Proxy ARP Interface Enable | ${dut1_node} | ${dut1_to_tg_name}
-| | Then Send ARP Request | ${tg_node} | ${tg_to_dut1_name}
-| | ...                   | ${tg_to_dut1_mac} | ${dut1_to_tg_mac}
-| | ...                   | ${tg_to_dut1_ip} | ${pass_test_hi_ip}
-
-| TC04: DUT does not send ARP reply on behalf of another machine from below of the IP range
-| | [Documentation]
-| | ... | [Top] TG-DUT1.
-| | ... | [Ref] RFC1027.
-| | ... | [Cfg] On DUT1 configure interface IPv4 address and proxy ARP
-| | ... | for IP range.
-| | ... | [Ver] Make TG send ARP request to DUT1 interface,
-| | ... | verify if DUT1 does not send ARP reply on behalf of machine which
-| | ... | IP is from below of the IP range.
-| | Given Configure path in 3-node circular topology
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
-| | And Set interfaces in 3-node circular topology up
-| | ${dut1_to_tg_name}= | Get interface name | ${dut1_node} | ${dut1_to_tg}
-| | ${tg_to_dut1_name}= | Get interface name | ${tg_node} | ${tg_to_dut1}
-| | When Set Interface Address | ${dut1_node}
-| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length}
-| | And Vpp Add Proxy ARP | ${dut1_node} | ${lo_ip4_addr} | ${hi_ip4_addr}
-| | And Vpp Proxy ARP Interface Enable | ${dut1_node} | ${dut1_to_tg_name}
-| | Then ARP request should fail | ${tg_node} | ${tg_to_dut1_name}
-| | ...                                 | ${tg_to_dut1_mac} | ${dut1_to_tg_mac}
-| | ...                                 | ${tg_to_dut1_ip} | ${fail_test_lo_ip}
-
-| TC05: DUT does not send ARP reply on behalf of another machine from above of the IP range
-| | [Documentation]
-| | ... | [Top] TG-DUT1.
-| | ... | [Ref] RFC1027.
-| | ... | [Cfg] On DUT1 configure interface IPv4 address and proxy ARP
-| | ... | for IP range.
-| | ... | [Ver] Make TG send ARP request to DUT1 interface,
-| | ... | verify if DUT1 does not send ARP reply on behalf of machine which
-| | ... | IP is from above of the IP range.
-| | Given Configure path in 3-node circular topology
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
-| | And Set interfaces in 3-node circular topology up
-| | ${dut1_to_tg_name}= | Get interface name | ${dut1_node} | ${dut1_to_tg}
-| | ${tg_to_dut1_name}= | Get interface name | ${tg_node} | ${tg_to_dut1}
-| | When Set Interface Address | ${dut1_node}
-| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length}
-| | And Vpp Add Proxy ARP | ${dut1_node} | ${lo_ip4_addr} | ${hi_ip4_addr}
-| | And Vpp Proxy ARP Interface Enable | ${dut1_node} | ${dut1_to_tg_name}
-| | Then ARP request should fail | ${tg_node} | ${tg_to_dut1_name}
-| | ...                                 | ${tg_to_dut1_mac} | ${dut1_to_tg_mac}
-| | ...                                 | ${tg_to_dut1_ip} | ${fail_test_hi_ip}