Remove _base from test suite dir names

Change-Id: I2e495f99a88dedc47f64efcc14722bb629a25f02
Signed-off-by: Jan Gelety <jgelety@cisco.com>

1 files changed, 120 insertions, 0 deletions

diff --git a/tests/func/ipv6/eth2p-ethip6-ip6base-func.robot b/tests/func/ipv6/eth2p-ethip6-ip6base-func.robot
new file mode 100644
index 0000000000..6048daad67
--- /dev/null
+++ b/tests/func/ipv6/eth2p-ethip6-ip6base-func.robot
@@ -0,0 +1,120 @@
+# Copyright (c) 2016 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Library | resources.libraries.python.Trace
+| Resource | resources/libraries/robot/interfaces.robot
+| Resource | resources/libraries/robot/ipv6.robot
+| Resource | resources/libraries/robot/counters.robot
+| Resource | resources/libraries/robot/default.robot
+| Variables | resources/libraries/python/IPv6NodesAddr.py | ${nodes}
+| Force Tags | HW_ENV
+| Suite Setup | Run Keywords
+| ... | Setup ipv6 to all dut in topology | ${nodes} | ${nodes_ipv6_addr} | AND
+| ... | Vpp nodes ra suppress link layer | ${nodes} | AND
+| ... | Vpp nodes setup ipv6 routing | ${nodes} | ${nodes_ipv6_addr} | AND
+| ... | Setup all TGs before traffic script
+| Test Setup | Run Keywords | Save VPP PIDs | AND
+| ... | Clear interface counters on all vpp nodes in topology | ${nodes}
+| Test Teardown | Run Keywords
+| ... | Show packet trace on all DUTs | ${nodes} | AND
+| ... | Show vpp trace dump on all DUTs | AND
+| ... | Check VPP PID in Teardown
+| Documentation | *IPv6 routing test cases*
+| ...
+| ... | RFC2460 IPv6, RFC4443 ICMPv6, RFC4861 Neighbor Discovery.
+| ... | Encapsulations: Eth-IPv6-ICMPv6 on links TG-DUT1, TG-DUT2, DUT1-DUT2;
+| ... | Eth-IPv6-NS/NA on links TG-DUT. IPv6 routing tests use circular 3-node
+| ... | topology TG - DUT1 - DUT2 - TG with one link between the nodes. DUT1 and
+| ... | DUT2 are configured with IPv6 routing and static routes. Test ICMPv6
+| ... | Echo Request packets are sent in both directions by TG on links to DUT1
+| ... | and DUT2 and received on TG links on the other side of circular
+| ... | topology. On receive TG verifies packets IPv6 src-addr, dst-addr and MAC
+| ... | addresses.
+
+*** Test Cases ***
+| TC01: DUT replies to ICMPv6 Echo Req to its ingress interface
+| | [Documentation]
+| | ... | Make TG send ICMPv6 Echo Req to DUT ingress interface. Make TG\
+| | ... | verify ICMPv6 Echo Reply is correct.
+| | [Tags] | 3_NODE_SINGLE_LINK_TOPO | VM_ENV
+| | Ipv6 icmp echo | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes_ipv6_addr}
+
+| TC02: DUT replies to ICMPv6 Echo Req pkt with size 64B-to-1500B-incr-1B
+| | [Documentation]
+| | ... | Make TG send ICMPv6 Echo Reqs to DUT ingress interface,\
+| | ... | incrementating frame size from 64B to 1500B with increment step
+| | ... | of 1Byte. Make TG verify ICMP Echo Replies are correct.
+| | [Tags] | 3_NODE_SINGLE_LINK_TOPO | VM_ENV
+| | Ipv6 icmp echo sweep | ${nodes['TG']} | ${nodes['DUT1']} | 0 | 1452 | 1 | ${nodes_ipv6_addr}
+
+| TC03: DUT replies to ICMPv6 Echo Req pkt with size 1500B-to-9000B-incr-10B
+| | [Documentation]
+| | ... | Make TG send ICMPv6 Echo Reqs to DUT ingress interface,\
+| | ... | incrementating frame size from 1500B to 9000B with increment
+| | ... | step of 10Bytes. Make TG verify ICMPv6 Echo Replies are correct.
+| | [Tags] | 3_NODE_SINGLE_LINK_TOPO
+| | [Setup] | Setup MTU on TG based on MTU on DUT | ${nodes['TG']} | ${nodes['DUT1']}
+| | [Teardown] | Run keywords
+| | ... | Set default Ethernet MTU on all interfaces on node | ${nodes['TG']}
+| | ... | AND | Check VPP PID in Teardown
+| | Append Nodes | ${nodes['TG']} | ${nodes['DUT1']}
+| | Compute Path
+| | ${dut_port} | ${dut_node}= | Last Interface
+| | ${mtu}= | Get Interface MTU | ${dut_node} | ${dut_port}
+| | # ICMPv6 payload size is frame size minus size of Ehternet header, FCS,
+| | # IPv6 header and ICMPv6 header
+| | ${end_size}= | Evaluate | ${mtu} - 14 - 4 - 40 - 8
+| | Run Keyword If | ${mtu} > 1518
+| | ...            | Ipv6 icmp echo sweep | ${nodes['TG']} | ${nodes['DUT1']}
+| | ...            | 1452 | ${end_size} | 10 | ${nodes_ipv6_addr}
+
+| TC04: DUT routes to its egress interface
+| | [Documentation]
+| | ... | Make TG send ICMPv6 Echo Req towards DUT1 egress interface\
+| | ... | connected to DUT2. Make TG verify ICMPv6 Echo Reply is correct.
+| | [Tags] | 3_NODE_SINGLE_LINK_TOPO | VM_ENV
+| | Ipv6 tg to dut1 egress | ${nodes['TG']} | ${nodes['DUT1']} |
+| | ...                    | ${nodes['DUT2']} | ${nodes_ipv6_addr}
+
+| TC05: DUT1 routes to DUT2 ingress interface
+| | [Documentation]
+| | ... | Make TG send ICMPv6 Echo Req towards DUT2 ingress interface\
+| | ... | connected to DUT1. Make TG verify ICMPv6 Echo Reply is correct.
+| | [Tags] | 3_NODE_SINGLE_LINK_TOPO | VM_ENV
+| | Ipv6 tg to dut2 via dut1 | ${nodes['TG']} | ${nodes['DUT1']}
+| | ...                      | ${nodes['DUT2']} | ${nodes_ipv6_addr}
+
+| TC06: DUT1 routes to DUT2 egress interface
+| | [Documentation]
+| | ... | Make TG send ICMPv6 Echo Req towards DUT2 egress interface\
+| | ... | connected to TG. Make TG verify ICMPv6 Echo Reply is correct.
+| | [Tags] | 3_NODE_SINGLE_LINK_TOPO | VM_ENV
+| | Ipv6 tg to dut2 egress via dut1 | ${nodes['TG']} | ${nodes['DUT1']}
+| | ...                             | ${nodes['DUT2']} | ${nodes_ipv6_addr}
+
+| TC07: DUT1 and DUT2 route between TG interfaces
+| | [Documentation]
+| | ... | Make TG send ICMPv6 Echo Req between its interfaces across DUT1\
+| | ... | and DUT2. Make TG verify ICMPv6 Echo Replies are correct.
+| | [Tags] | 3_NODE_SINGLE_LINK_TOPO | VM_ENV
+| | Ipv6 tg to tg routed | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']}
+| | ...                  | ${nodes_ipv6_addr}
+
+| TC08: DUT replies to IPv6 Neighbor Solicitation
+| | [Documentation]
+| | ... | On DUT configure interface IPv6 address in the main routing\
+| | ... | domain. Make TG send Neighbor Solicitation message on the link
+| | ... | to DUT and verify DUT Neighbor Advertisement reply is correct.
+| | [Tags] | 3_NODE_SINGLE_LINK_TOPO | VM_ENV
+| | Ipv6 neighbor solicitation | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes_ipv6_addr}