diff options
author | Jan Gelety <jgelety@cisco.com> | 2017-01-25 13:32:01 +0100 |
---|---|---|
committer | Jan Gelety <jgelety@cisco.com> | 2017-01-25 13:32:01 +0100 |
commit | 5814118adfec1cf88603d5b8c0015a0a1d032942 (patch) | |
tree | 55279cdc3cb15174c0bceb1d55fdb97685691a86 /tests/func/ipv6/eth2p-ethip6-ip6base-ip6ra-func.robot | |
parent | e507c9603efd1a9377ff835d108e51ddb9a0b5c3 (diff) |
Remove _base from test suite dir names
Change-Id: I2e495f99a88dedc47f64efcc14722bb629a25f02
Signed-off-by: Jan Gelety <jgelety@cisco.com>
Diffstat (limited to 'tests/func/ipv6/eth2p-ethip6-ip6base-ip6ra-func.robot')
-rw-r--r-- | tests/func/ipv6/eth2p-ethip6-ip6base-ip6ra-func.robot | 107 |
1 files changed, 107 insertions, 0 deletions
diff --git a/tests/func/ipv6/eth2p-ethip6-ip6base-ip6ra-func.robot b/tests/func/ipv6/eth2p-ethip6-ip6base-ip6ra-func.robot new file mode 100644 index 0000000000..e45ce730c9 --- /dev/null +++ b/tests/func/ipv6/eth2p-ethip6-ip6base-ip6ra-func.robot @@ -0,0 +1,107 @@ +# Copyright (c) 2016 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/default.robot +| Resource | resources/libraries/robot/counters.robot +| Resource | resources/libraries/robot/interfaces.robot +| Resource | resources/libraries/robot/testing_path.robot +| Resource | resources/libraries/robot/ipv6.robot +| Resource | resources/libraries/robot/traffic.robot +| Library | resources.libraries.python.Trace +| Force Tags | HW_ENV | VM_ENV | 3_NODE_SINGLE_LINK_TOPO +| Test Setup | Func Test Setup +| Test Teardown | Func Test Teardown +| Documentation | *IPv6 Router Advertisement test cases* +| ... +| ... | RFC4861 Neighbor Discovery. Encapsulations: Eth-IPv6-RA on links +| ... | TG-DUT1. IPv6 Router Advertisement tests use 3-node topology TG - DUT1 - +| ... | DUT2 - TG with one link between the nodes. DUT1 and DUT2 are configured +| ... | with IPv6 routing and static routes. TG verifies received RA packets. + + +*** Variables *** +| ${dut1_to_tg_ip}= | 3ffe:62::1 +| ${tg_to_dut1_ip}= | 3ffe:62::2 +| ${prefix_length}= | 64 +| ${interval}= | 2 + +*** Test Cases *** +| TC01: DUT transmits RA on IPv6 enabled interface +| | [Documentation] +| | ... | [Top] TG-DUT1-DUT2-TG. +| | ... | [Cfg] On DUT1 configure IPv6 interface on the link to TG. +| | ... | [Ver] Make TG wait for IPv6 Router Advertisement packet to be sent\ +| | ... | by DUT1 and verify the received RA packet is correct. +| | [Tags] | EXPECTED_FAILING +| | Given Path For 3-node Testing Is Set +| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} +| | And Interfaces In 3-node Path Are Up +| | And Vpp Set If Ipv6 Addr | ${dut1_node} +| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length} +| | When Vpp RA Send After Interval | ${dut1_node} | ${dut1_to_tg} +| | Then Receive And Check Router Advertisement Packet +| | ... | ${tg_node} | ${tg_to_dut1} | ${dut1_to_tg_mac} + +| TC02: DUT retransmits RA on IPv6 enabled interface after a set interval +| | [Documentation] +| | ... | [Top] TG-DUT1-DUT2-TG. +| | ... | [Cfg] On DUT1 configure IPv6 interface on the link to TG. +| | ... | [Ver] Make TG wait for two IPv6 Router Advertisement packets\ +| | ... | to be sent by DUT1 and verify the received RA packets are correct. +| | [Tags] | EXPECTED_FAILING +| | Given Path For 3-node Testing Is Set +| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} +| | And Interfaces In 3-node Path Are Up +| | And Vpp Set If Ipv6 Addr | ${dut1_node} +| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length} +| | When Vpp RA Send After Interval | ${dut1_node} | ${dut1_to_tg} +| | ... | interval=${interval} +| | :FOR | ${n} | IN RANGE | ${2} +| | | Then Receive And Check Router Advertisement Packet +| | | ... | ${tg_node} | ${tg_to_dut1} | ${dut1_to_tg_mac} | ${interval} + +| TC03: DUT responds to Router Solicitation request +| | [Documentation] +| | ... | [Top] TG-DUT1-DUT2-TG. +| | ... | [Cfg] On DUT1 configure IPv6 interface on the link to TG and suppress\ +| | ... | sending of Router Advertisement packets periodically. +| | ... | [Ver] Make TG send IPv6 Router Solicitation request to DUT1, listen\ +| | ... | for response from DUT1 and verify the received RA packet is correct. +| | [Tags] | EXPECTED_FAILING +| | Given Path For 3-node Testing Is Set +| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} +| | And Interfaces In 3-node Path Are Up +| | And Vpp Set If Ipv6 Addr | ${dut1_node} +| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length} +| | When VPP RA Suppress Link Layer | ${dut1_node} | ${dut1_to_tg} +| | Then Send Router Solicitation And Check Response +| | ... | ${tg_node} | ${dut1_node} | ${tg_to_dut1} | ${dut1_to_tg} +| | ... | ${tg_to_dut1_ip} + +| TC04: DUT responds to Router Solicitation request sent from link local address +| | [Documentation] +| | ... | [Top] TG-DUT1-DUT2-TG. +| | ... | [Cfg] On DUT1 configure IPv6 interface on the link to TG and suppress\ +| | ... | sending of Router Advertisement packets periodically. +| | ... | [Ver] Make TG send IPv6 Router Solicitation request to DUT1, listen\ +| | ... | for response from DUT1 and verify the received RA packet is correct. +| | [Tags] | EXPECTED_FAILING +| | Given Path For 3-node Testing Is Set +| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} +| | And Interfaces In 3-node Path Are Up +| | And Vpp Set If Ipv6 Addr | ${dut1_node} +| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length} +| | When VPP RA Suppress Link Layer | ${dut1_node} | ${dut1_to_tg} +| | Then Send Router Solicitation And Check Response +| | ... | ${tg_node} | ${dut1_node} | ${tg_to_dut1} | ${dut1_to_tg} |