CSIT-687: Directory structure reorganization

Change-Id: I772c9e214be2461adf58124998d272e7d795220f
Signed-off-by: Tibor Frank <tifrank@cisco.com>
Signed-off-by: Maciek Konstantynowicz <mkonstan@cisco.com>

1 files changed, 0 insertions, 110 deletions

diff --git a/tests/func/l2bd/eth2p-eth-l2bdbasemaclrn-eth-2vhost-1vm-func.robot b/tests/func/l2bd/eth2p-eth-l2bdbasemaclrn-eth-2vhost-1vm-func.robot
deleted file mode 100644
index b6a945865f..0000000000
--- a/tests/func/l2bd/eth2p-eth-l2bdbasemaclrn-eth-2vhost-1vm-func.robot
+++ /dev/null
@@ -1,110 +0,0 @@
-# Copyright (c) 2016 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Resource | resources/libraries/robot/default.robot
-| Resource | resources/libraries/robot/bridge_domain.robot
-| Resource | resources/libraries/robot/testing_path.robot
-| Resource | resources/libraries/robot/qemu.robot
-| Library  | resources.libraries.python.Trace
-| Force Tags | 3_NODE_DOUBLE_LINK_TOPO | HW_ENV | VM_ENV | VPP_VM_ENV
-| Test Setup | Set up functional test
-| Test Teardown | Tear down functional test
-| Documentation | *L2 bridge-domain test cases*
-| ...
-| ... | *[Top] Network Topologies:* TG=DUT=VM 3-node topology with VM
-| ... | and double parallel links.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-ICMPv4 for L2 switching of
-| ... | IPv4; Eth-IPv6-ICMPv6 for L2 switching of IPv6 use. Both apply
-| ... | to all links.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge-domains
-| ... | (L2BD) switching combined with MAC learning enabled.
-| ... | *[Ver] TG verification:* Test ICMPv4 (or ICMPv6) Echo Request packets
-| ... | are sent in both directions by TG on links to DUT1 via VM; on
-| ... | receive TG verifies packets for correctness and their IPv4 (IPv6)
-| ... | src-addr, dst-addr and MAC addresses.
-| ... | *[Ref] Applicable standard specifications:*
-
-*** Variables ***
-| ${bd_id1}= | 1
-| ${bd_id2}= | 2
-
-| ${sock1}= | /tmp/sock1
-| ${sock2}= | /tmp/sock2
-
-*** Test Cases ***
-| TC01: DUT with two L2BDs (MAC learn) switches ICMPv4 between TG and VM links
-| | [Documentation]
-| | ... | [Top] TG=DUT=VM. [Enc] Eth-IPv4-ICMPv4. [Cfg] On DUT1 configure \
-| | ... | two L2BDs with MAC learning, each with vhost-user i/f to local
-| | ... | VM and i/f to TG; configure VM to loop pkts back betwen its two
-| | ... | virtio i/fs. [Ver] Make TG verify ICMPv4 Echo Req pkts are
-| | ... | switched thru DUT1 and VM in both directions and are correct on
-| | ... | receive. [Ref]
-| | ...
-| | [Teardown] | Run Keywords | Stop and clear QEMU | ${dut_node} | ${vm_node}
-| | ... | AND | Tear down functional test
-| | ...
-| | Given Configure path in 2-node circular topology
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']}
-| | And Set interfaces in 2-node circular topology up
-| | When Configure vhost interfaces for L2BD forwarding | ${dut_node}
-| | ... | ${sock1}
-| | ... | ${sock2}
-| | And Create bridge domain | ${dut_node} | ${bd_id1}
-| | And Add interface to bridge domain | ${dut_node} | ${dut_to_tg_if1}
-| | ... | ${bd_id1}
-| | And Add interface to bridge domain | ${dut_node} | ${vhost_if1}
-| | ... | ${bd_id1}
-| | And Create bridge domain | ${dut_node} | ${bd_id2}
-| | And Add interface to bridge domain | ${dut_node} | ${dut_to_tg_if2}
-| | ... | ${bd_id2}
-| | And Add interface to bridge domain | ${dut_node} | ${vhost_if2}
-| | ... | ${bd_id2}
-| | And Configure VM for vhost L2BD forwarding | ${dut_node} | ${sock1}
-| | ... | ${sock2}
-| | Then Send ICMPv4 bidirectionally and verify received packets | ${tg_node}
-| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if2}
-
-| TC02: DUT with two L2BDs (MAC learn) switches ICMPv6 between TG and VM links
-| | [Documentation]
-| | ... | [Top] TG=DUT=VM. [Enc] Eth-IPv6-ICMPv6. [Cfg] On DUT1 configure \
-| | ... | two L2BDs with MAC learning, each with vhost-user i/f to local
-| | ... | VM and i/f to TG; configure VM to loop pkts back betwen its two
-| | ... | virtio i/fs. [Ver] Make TG verify ICMPv6 Echo Req pkts are
-| | ... | switched thru DUT1 and VM in both directions and are correct on
-| | ... | receive. [Ref]
-| | ...
-| | [Teardown] | Run Keywords | Stop and clear QEMU | ${dut_node} | ${vm_node}
-| | ... | AND | Tear down functional test
-| | ...
-| | Given Configure path in 2-node circular topology
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']}
-| | And Set interfaces in 2-node circular topology up
-| | When Configure vhost interfaces for L2BD forwarding | ${dut_node}
-| | ... | ${sock1}
-| | ... | ${sock2}
-| | And Create bridge domain | ${dut_node} | ${bd_id1}
-| | And Add interface to bridge domain | ${dut_node} | ${dut_to_tg_if1}
-| | ... | ${bd_id1}
-| | And Add interface to bridge domain | ${dut_node} | ${vhost_if1}
-| | ... | ${bd_id1}
-| | And Create bridge domain | ${dut_node} | ${bd_id2}
-| | And Add interface to bridge domain | ${dut_node} | ${dut_to_tg_if2}
-| | ... | ${bd_id2}
-| | And Add interface to bridge domain | ${dut_node} | ${vhost_if2}
-| | ... | ${bd_id2}
-| | And Configure VM for vhost L2BD forwarding | ${dut_node} | ${sock1}
-| | ... | ${sock2}
-| | Then Send ICMPv6 bidirectionally and verify received packets | ${tg_node}
-| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if2}