CSIT-687: Directory structure reorganization

Change-Id: I772c9e214be2461adf58124998d272e7d795220f
Signed-off-by: Tibor Frank <tifrank@cisco.com>
Signed-off-by: Maciek Konstantynowicz <mkonstan@cisco.com>

1 files changed, 0 insertions, 116 deletions

diff --git a/tests/func/lisp/api-crud-lisp-func.robot b/tests/func/lisp/api-crud-lisp-func.robot
deleted file mode 100644
index da97272913..0000000000
--- a/tests/func/lisp/api-crud-lisp-func.robot
+++ /dev/null
@@ -1,116 +0,0 @@
-# Copyright (c) 2016 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Library | resources.libraries.python.topology.Topology
-| Library | resources.libraries.python.NodePath
-| Library | resources.libraries.python.Trace
-| Library | resources.libraries.python.LispUtil
-| Resource | resources/libraries/robot/default.robot
-| Resource | resources/libraries/robot/interfaces.robot
-| Resource | resources/libraries/robot/lisp/lisp_api.robot
-# import additional Lisp settings from resource file
-| Variables | resources/test_data/lisp/api/lisp_api_resources.py
-| ...
-| Force Tags | 3_NODE_SINGLE_LINK_TOPO | 3_NODE_DOUBLE_LINK_TOPO
-| ... | VM_ENV | HW_ENV
-| ...
-| Test Setup | Set up functional test
-| ...
-| Test Teardown | Tear down functional test
-| ...
-| Documentation | *API test cases*
-| ...
-| ... | *[Top] Network Topologies:* DUT1 1-node topology.
-| ... | *[Enc] Packet Encapsulations:* None.
-| ... | *[Cfg] DUT configuration:* DUT1 gets configured with all LISP
-| ... | parameters.
-| ... | *[Ver] Verification:* DUT1 operational data gets verified following
-| ... | configuration.
-| ... | *[Ref] Applicable standard specifications:* RFC6830.
-
-*** Variables ***
-| ${locator_set_num}= | 3
-
-*** Test Cases ***
-
-| TC01: DUT can enable and disable LISP
-| | [Documentation]
-| | ... | [Top] DUT1. [Enc] None. [Cfg1] Test LISP enable/disable API; On \
-| | ... | DUT1 enable LISP. [Ver1] Check DUT1 if LISP is enabled. [Cfg2]
-| | ... | Then disable LISP. [Ver2] Check DUT1 if LISP is disabled. [Ref]
-| | ... | RFC6830.
-| | When Enable LISP | ${nodes['DUT1']}
-| | Then LISP should be enabled | ${nodes['DUT1']} | ${lisp_status}
-| | When Disable LISP | ${nodes['DUT1']}
-| | Then LISP Should be disabled | ${nodes['DUT1']} | ${lisp_status}
-
-| TC02: DUT can add and delete locator_set
-| | [Documentation]
-| | ... | [Top] DUT1. [Enc] None. [Cfg1] Test LISP locator_set API; on \
-| | ... | DUT1 configure locator_set and locator. [Ver1] Check DUT1
-| | ... | configured locator_set and locator are correct. [Cfg2] Then
-| | ... | remove locator_set and locator. [Ver2] check DUT1 locator_set
-| | ... | and locator are removed. [Ref] RFC6830.
-| | Given Generate LISP locator_set data
-| | ... | ${nodes['DUT1']} | ${locator_set_num}
-| | And Enable LISP | ${nodes['DUT1']}
-| | When Configure LISP locator_set data | ${nodes['DUT1']}
-| | Then LISP locator_set shpuld be configured correctly | ${nodes['DUT1']}
-| | When Delete all LISP locator_set from VPP | ${nodes['DUT1']}
-| | Then LISP locator_set should be unset | ${nodes['DUT1']}
-
-| TC03: DUT can add, reset and delete locator_set
-| | [Documentation]
-| | ... | [Top] DUT1. [Enc] None. [Cfg1] Test LISP locator_set API; on \
-| | ... | DUT1 configure locator_set and locator. [Ver1] Check DUT1
-| | ... | locator_set and locator are correct. [Cfg2] Then reset
-| | ... | locator_set and set it again. [Ver2] Check DUT1 locator_set and
-| | ... | locator are correct. [Cfg3] Then remove locator_set and locator.
-| | ... | [Ver3] Check DUT1 all locator_set and locators are removed.
-| | ... | [Ref] RFC6830.
-| | Given Lisp locator_set data use for test reset locator_set are prepared
-| | ... | ${nodes['DUT1']} | ${locator_set_num}
-| | And Enable LISP | ${nodes['DUT1']}
-| | When Configure LISP locator_set data | ${nodes['DUT1']}
-| | Then LISP locator_set shpuld be configured correctly | ${nodes['DUT1']}
-| | When Delete all LISP locator_set from VPP | ${nodes['DUT1']}
-| | Then LISP locator_set should be unset | ${nodes['DUT1']}
-
-| TC04: DUT can add and delete eid address
-| | [Documentation]
-| | ... | [Top] DUT1. [Enc] None. [Cfg1] Test LISP eid API; on DUT1 \
-| | ... | configure LISP eid IP address. [Ver1] Check DUT1 configured data
-| | ... | is correct. [Cfg2] Remove configured data. [Ver2] Check DUT1 all
-| | ... | eid IP addresses are removed. [Ref] RFC6830.
-| | Given Enable LISP | ${nodes['DUT1']}
-| | When Configure LISP eid address | ${nodes['DUT1']} | ${eid_table}
-| | Then LISP eid address should be set correctly to eid table
-| | ... | ${nodes['DUT1']} | ${eid_table_vat}
-| | When Delete all LISP eid address from VPP | ${nodes['DUT1']} | ${eid_table}
-| | Then LISP eid table should be empty | ${nodes['DUT1']}
-
-| TC05: DUT can add and delete LISP map resolver address
-| | [Documentation]
-| | ... | [Top] DUT1. [Enc] None. [Cfg1] Test LISP map resolver address \
-| | ... | API; on DUT1 configure LISP map resolver address. [Ver1] Check
-| | ... | DUT1 configured data is correct. [Cfg2] Remove configured data.
-| | ... | [Ver2] Check DUT1 all map resolver addresses are removed. [Ref]
-| | ... | RFC6830.
-| | Given Enable LISP | ${nodes['DUT1']}
-| | When Configure LISP map resolver address | ${nodes['DUT1']} | ${map_resolver}
-| | Then LISP map resolver address should be configured correctly
-| | ... | ${nodes['DUT1']} | ${map_resolver}
-| | When Delete all LISP map resolver address from VPP
-| | ... | ${nodes['DUT1']} | ${map_resolver}
-| | Then LISP map resolver address should be empty | ${nodes['DUT1']}