CSIT-450: Refactor LISP files

-change file names to appropriate
-move tests to appropriate files

Change-Id: Icadd7b8dcee503f4026d340bbfdba488145b8c9d
Signed-off-by: Zdeno Olsovsky <zolsovsk@cisco.com>

1 files changed, 115 insertions, 0 deletions

diff --git a/tests/func/lisp/api.robot b/tests/func/lisp/api.robot
new file mode 100644
index 0000000000..e464ba221b
--- /dev/null
+++ b/tests/func/lisp/api.robot
@@ -0,0 +1,115 @@
+# Copyright (c) 2016 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Library | resources.libraries.python.topology.Topology
+| Library | resources.libraries.python.NodePath
+| Library | resources.libraries.python.Trace
+| Library | resources.libraries.python.LispUtil
+| Resource | resources/libraries/robot/default.robot
+| Resource | resources/libraries/robot/interfaces.robot
+| Resource | resources/libraries/robot/lisp/lisp_api.robot
+# import additional Lisp settings from resource file
+| Variables | resources/test_data/lisp/api/lisp_api_resources.py
+| Force Tags | 3_NODE_SINGLE_LINK_TOPO | 3_NODE_DOUBLE_LINK_TOPO
+| ... | VM_ENV | HW_ENV
+| Test Setup | Run Keywords | Setup all DUTs before test
+| ...        | AND          | Setup all TGs before traffic script
+| ...        | AND          | Update All Interface Data On All Nodes | ${nodes}
+| Test Teardown | Run Keywords | Show Packet Trace on All DUTs | ${nodes}
+| ...           | AND          | Show vpp trace dump on all DUTs
+| Documentation | *API test cases*
+| ...
+| ... | *[Top] Network Topologies:* DUT1 1-node topology.
+| ... | *[Enc] Packet Encapsulations:* None.
+| ... | *[Cfg] DUT configuration:* DUT1 gets configured with all LISP
+| ... | parameters.
+| ... | *[Ver] Verification:* DUT1 operational data gets verified following
+| ... | configuration.
+| ... | *[Ref] Applicable standard specifications:* RFC6830.
+
+*** Variables ***
+| ${locator_set_num}= | 3
+
+*** Test Cases ***
+
+| TC01: DUT can enable and disable LISP
+| | [Documentation]
+| | ... | [Top] DUT1. [Enc] None. [Cfg1] Test LISP enable/disable API; On \
+| | ... | DUT1 enable LISP. [Ver1] Check DUT1 if LISP is enabled. [Cfg2]
+| | ... | Then disable LISP. [Ver2] Check DUT1 if LISP is disabled. [Ref]
+| | ... | RFC6830.
+| | When Enable lisp | ${nodes['DUT1']}
+| | Then Check if lisp is enabled | ${nodes['DUT1']} | ${lisp_status}
+| | When Disable lisp | ${nodes['DUT1']}
+| | Then Check if lisp is disabled | ${nodes['DUT1']} | ${lisp_status}
+
+| TC02: DUT can add and delete locator_set
+| | [Documentation]
+| | ... | [Top] DUT1. [Enc] None. [Cfg1] Test LISP locator_set API; on \
+| | ... | DUT1 configure locator_set and locator. [Ver1] Check DUT1
+| | ... | configured locator_set and locator are correct. [Cfg2] Then
+| | ... | remove locator_set and locator. [Ver2] check DUT1 locator_set
+| | ... | and locator are removed. [Ref] RFC6830.
+| | Given Lisp locator_set data is prepared
+| | ... | ${nodes['DUT1']} | ${locator_set_num}
+| | And Enable lisp | ${nodes['DUT1']}
+| | When Lisp locator_set data is set | ${nodes['DUT1']}
+| | Then Lisp locator_set is set correctly | ${nodes['DUT1']}
+| | When Delete all lisp locator_set from VPP | ${nodes['DUT1']}
+| | Then Lisp locator_set should be unset | ${nodes['DUT1']}
+
+| TC03: DUT can add, reset and delete locator_set
+| | [Documentation]
+| | ... | [Top] DUT1. [Enc] None. [Cfg1] Test LISP locator_set API; on \
+| | ... | DUT1 configure locator_set and locator. [Ver1] Check DUT1
+| | ... | locator_set and locator are correct. [Cfg2] Then reset
+| | ... | locator_set and set it again. [Ver2] Check DUT1 locator_set and
+| | ... | locator are correct. [Cfg3] Then remove locator_set and locator.
+| | ... | [Ver3] Check DUT1 all locator_set and locators are removed.
+| | ... | [Ref] RFC6830.
+| | Given Lisp locator_set data use for test reset locator_set are prepared
+| | ... | ${nodes['DUT1']} | ${locator_set_num}
+| | And Enable lisp | ${nodes['DUT1']}
+| | When Lisp locator_set data is set | ${nodes['DUT1']}
+| | Then Lisp locator_set is set correctly | ${nodes['DUT1']}
+| | When Delete all lisp locator_set from VPP | ${nodes['DUT1']}
+| | Then Lisp locator_set should be unset | ${nodes['DUT1']}
+
+| TC04: DUT can add and delete eid address
+| | [Documentation]
+| | ... | [Top] DUT1. [Enc] None. [Cfg1] Test LISP eid API; on DUT1 \
+| | ... | configure LISP eid IP address. [Ver1] Check DUT1 configured data
+| | ... | is correct. [Cfg2] Remove configured data. [Ver2] Check DUT1 all
+| | ... | eid IP addresses are removed. [Ref] RFC6830.
+| | Given Enable lisp | ${nodes['DUT1']}
+| | When Lisp eid address is set | ${nodes['DUT1']} | ${eid_table}
+| | Then Lisp eid address is set correctly to eid table
+| | ... | ${nodes['DUT1']} | ${eid_table_vat}
+| | When Delete all lisp eid address from VPP | ${nodes['DUT1']} | ${eid_table}
+| | Then Lisp eid table should be empty | ${nodes['DUT1']}
+
+| TC05: DUT can add and delete LISP map resolver address
+| | [Documentation]
+| | ... | [Top] DUT1. [Enc] None. [Cfg1] Test LISP map resolver address \
+| | ... | API; on DUT1 configure LISP map resolver address. [Ver1] Check
+| | ... | DUT1 configured data is correct. [Cfg2] Remove configured data.
+| | ... | [Ver2] Check DUT1 all map resolver addresses are removed. [Ref]
+| | ... | RFC6830.
+| | Given Enable lisp | ${nodes['DUT1']}
+| | When Lisp map resolver address is set | ${nodes['DUT1']} | ${map_resolver}
+| | Then Lisp map resolver address is set correctly
+| | ... | ${nodes['DUT1']} | ${map_resolver}
+| | When Delete all lisp map resolver address from VPP
+| | ... | ${nodes['DUT1']} | ${map_resolver}
+| | Then Lip map resolver address should be empty | ${nodes['DUT1']}