CSIT-450: Refactor LISP files

-change file names to appropriate
-move tests to appropriate files

Change-Id: Icadd7b8dcee503f4026d340bbfdba488145b8c9d
Signed-off-by: Zdeno Olsovsky <zolsovsk@cisco.com>

1 files changed, 123 insertions, 0 deletions

diff --git a/tests/func/lisp/dataplane_generic.robot b/tests/func/lisp/dataplane_generic.robot
new file mode 100644
index 0000000000..94079d162f
--- /dev/null
+++ b/tests/func/lisp/dataplane_generic.robot
@@ -0,0 +1,123 @@
+# Copyright (c) 2016 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/default.robot
+| Resource | resources/libraries/robot/testing_path.robot
+| Resource | resources/libraries/robot/ipv4.robot
+| Resource | resources/libraries/robot/traffic.robot
+| Resource | resources/libraries/robot/lisp/lisp_static_adjacency.robot
+| Resource | resources/libraries/robot/l2_traffic.robot
+| Library  | resources.libraries.python.IPUtil
+| Library  | resources.libraries.python.Trace
+# import additional Lisp settings from resource file
+| Variables | resources/test_data/lisp/static_adjacency/lisp_static_adjacency.py
+| Force Tags | 3_NODE_SINGLE_LINK_TOPO | 3_NODE_DOUBLE_LINK_TOPO
+| ... | VM_ENV | HW_ENV
+| Test Setup | Run Keywords | Setup all DUTs before test
+| ...        | AND          | Setup all TGs before traffic script
+| ...        | AND          | Update All Interface Data On All Nodes | ${nodes}
+| Test Teardown | Run Keywords | Show Packet Trace on All DUTs | ${nodes}
+| ...           | AND          | Show vpp trace dump on all DUTs
+| Documentation | *IP AFI independent functional tests.*
+| ...
+| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
+| ... | with single links between nodes.
+| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-LISP-IPv4-ICMPv4 on DUT1-DUT2,\
+| ... | Eth-IPv4-ICMPv4 on TG-DUTn for IPv4 routing over LISPoIPv4 tunnel.
+| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4\
+| ... | routing and static routes. LISPoIPv4 tunnel is\
+| ... | configured between DUT1 and DUT2.
+| ... | *[Ver] TG verification:* Test ICMPv4 Echo Request packets\
+| ... | are sent in both directions by TG on links to DUT1 and DUT2; on receive\
+| ... | TG verifies packets for correctness and their IPv4 src-addr,\
+| ... | dst-addr and MAC addresses.
+| ... | *[Ref] Applicable standard specifications:* RFC6830.
+
+*** Test Cases ***
+| TC01: DUT1 and DUT2 route IPv4 over LISPoIPv4 tunnel after disable-enable
+| | [Documentation]
+| | ... | [Top] TG-DUT1-DUT2-TG.
+| | ... | [Enc] Eth-IPv4-LISP-IPv4-ICMPv4 on DUT1-DUT2, Eth-IPv4-ICMPv4 on\
+| | ... | TG-DUTn.
+| | ... | [Cfg1] On DUT1 and DUT2 configure IPv4 LISP static adjacencies.
+| | ... | [Ver1] Make TG send ICMPv4 Echo Req between its interfaces across\
+| | ... | both DUTs and LISP tunnel between them; verify IPv4 headers on\
+| | ... | received packets are correct.
+| | ... | [Cfg2] Disable LISP.
+| | ... | [Ver2] Verify packets are not received via LISP tunnel.
+| | ... | [Cfg3] Re-enable LISP.
+| | ... | [Ver3] Verify packets are received again via LISP tunnel.
+| | ... | [Ref] RFC6830.
+| | Given Path for 3-node testing is set
+| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
+| | And   Interfaces in 3-node path are up
+| | And   IP addresses are set on interfaces
+| |       ... | ${dut1_node} | ${dut1_to_dut2}
+| |       ... | ${dut1_to_dut2_ip4} | ${prefix4}
+| |       ... | ${dut1_node} | ${dut1_to_tg}
+| |       ... | ${dut1_to_tg_ip4} | ${prefix4}
+| |       ... | ${dut2_node} | ${dut2_to_dut1}
+| |       ... | ${dut2_to_dut1_ip4} | ${prefix4}
+| |       ... | ${dut2_node} | ${dut2_to_tg}
+| |       ... | ${dut2_to_tg_ip4} | ${prefix4}
+| | And   VPP IP Probe | ${dut1_node} | ${dut1_to_dut2} | ${dut2_to_dut1_ip4}
+| | And   VPP IP Probe | ${dut2_node} | ${dut2_to_dut1} | ${dut1_to_dut2_ip4}
+| | And   Add Arp On Dut | ${dut2_node} | ${dut2_to_tg} | ${tg2_ip4}
+| |       ... | ${tg_to_dut2_mac}
+| | And   Add Arp On Dut | ${dut1_node} | ${dut1_to_tg} | ${tg1_ip4}
+| |       ... | ${tg_to_dut1_mac}
+| | When Set up Lisp topology
+| |      ... | ${dut1_node} | ${dut1_to_dut2} | ${NONE}
+| |      ... | ${dut2_node} | ${dut2_to_dut1} | ${NONE}
+| |      ... | ${duts_locator_set} | ${dut1_ip4_eid} | ${dut2_ip4_eid}
+| |      ... | ${dut1_to_dut2_ip4_static_adjacency}
+| |      ... | ${dut2_to_dut1_ip4_static_adjacency}
+| | Then Send Packet And Check Headers
+| |      ... | ${tg_node} | ${tg1_ip4} | ${tg2_ip4}
+| |      ... | ${tg_to_dut1} | ${tg_to_dut1_mac} | ${dut1_to_tg_mac}
+| |      ... | ${tg_to_dut2} | ${dut2_to_tg_mac} | ${tg_to_dut2_mac}
+| | And Send Packet And Check Headers
+| |      ... | ${tg_node} | ${tg2_ip4} | ${tg1_ip4}
+| |      ... | ${tg_to_dut2} | ${tg_to_dut2_mac} | ${dut2_to_tg_mac}
+| |      ... | ${tg_to_dut1} | ${dut1_to_tg_mac} | ${tg_to_dut1_mac}
+| | When Disable Lisp | ${dut1_node}
+| | Then Send packet from Port to Port should failed
+| |      ... | ${tg_node} | ${tg1_ip4} | ${tg2_ip4}
+| |      ... | ${tg_to_dut1} | ${tg_to_dut1_mac} | ${dut1_to_tg_mac}
+| |      ... | ${tg_to_dut2} | ${dut2_to_tg_mac} | ${tg_to_dut2_mac}
+| | And Send packet from Port to Port should failed
+| |      ... | ${tg_node} | ${tg2_ip4} | ${tg1_ip4}
+| |      ... | ${tg_to_dut2} | ${tg_to_dut2_mac} | ${dut2_to_tg_mac}
+| |      ... | ${tg_to_dut1} | ${dut1_to_tg_mac} | ${tg_to_dut1_mac}
+| | When Enable Lisp | ${dut1_node}
+| | And Vpp Add Lisp Adjacency | ${dut1_node}
+| |     ... | ${dut1_to_dut2_ip4_static_adjacency['vni']}
+| |     ... | ${dut1_to_dut2_ip4_static_adjacency['deid']}
+| |     ... | ${dut1_to_dut2_ip4_static_adjacency['prefix']}
+| |     ... | ${dut1_to_dut2_ip4_static_adjacency['seid']}
+| |     ... | ${dut1_to_dut2_ip4_static_adjacency['prefix']}
+| | And Vpp Add Lisp Adjacency | ${dut2_node}
+| |     ... | ${dut2_to_dut1_ip4_static_adjacency['vni']}
+| |     ... | ${dut2_to_dut1_ip4_static_adjacency['deid']}
+| |     ... | ${dut2_to_dut1_ip4_static_adjacency['prefix']}
+| |     ... | ${dut2_to_dut1_ip4_static_adjacency['seid']}
+| |     ... | ${dut2_to_dut1_ip4_static_adjacency['prefix']}
+| | Then Wait Until Keyword Succeeds | 2x | 5s | Send Packet And Check Headers
+| |      ... | ${tg_node} | ${tg1_ip4} | ${tg2_ip4}
+| |      ... | ${tg_to_dut1} | ${tg_to_dut1_mac} | ${dut1_to_tg_mac}
+| |      ... | ${tg_to_dut2} | ${dut2_to_tg_mac} | ${tg_to_dut2_mac}
+| | And Wait Until Keyword Succeeds | 2x | 5s | Send Packet And Check Headers
+| |      ... | ${tg_node} | ${tg2_ip4} | ${tg1_ip4}
+| |      ... | ${tg_to_dut2} | ${tg_to_dut2_mac} | ${dut2_to_tg_mac}
+| |      ... | ${tg_to_dut1} | ${dut1_to_tg_mac} | ${tg_to_dut1_mac}
\ No newline at end of file