CSIT-687: Directory structure reorganization

Change-Id: I772c9e214be2461adf58124998d272e7d795220f
Signed-off-by: Tibor Frank <tifrank@cisco.com>
Signed-off-by: Maciek Konstantynowicz <mkonstan@cisco.com>

1 files changed, 0 insertions, 96 deletions

diff --git a/tests/func/lisp/eth2p-ethip6lisp-l2bdbasemaclrn-func.robot b/tests/func/lisp/eth2p-ethip6lisp-l2bdbasemaclrn-func.robot
deleted file mode 100644
index 7db90b677a..0000000000
--- a/tests/func/lisp/eth2p-ethip6lisp-l2bdbasemaclrn-func.robot
+++ /dev/null
@@ -1,96 +0,0 @@
-# Copyright (c) 2016 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Library | resources.libraries.python.topology.Topology
-| Library | resources.libraries.python.NodePath
-| Library | resources.libraries.python.Trace
-| Library | resources.libraries.python.IPUtil
-| Library | resources.libraries.python.LispUtil
-| Library | resources.libraries.python.L2Util
-| Resource | resources/libraries/robot/traffic.robot
-| Resource | resources/libraries/robot/default.robot
-| Resource | resources/libraries/robot/interfaces.robot
-| Resource | resources/libraries/robot/testing_path.robot
-| Resource | resources/libraries/robot/ipv4.robot
-| Resource | resources/libraries/robot/lisp/l2lisp.robot
-# Import configuration and test data:
-| Variables | resources/test_data/lisp/l2/l2_ipv6.py
-| ...
-| Force Tags | 3_NODE_SINGLE_LINK_TOPO | VM_ENV | LISP
-| ...
-| Test Setup | Set up functional test
-| ...
-| Test Teardown | Tear down functional test
-| ...
-| Documentation | *l2-lispgpe-ip6 encapsulation test cases*
-| ...
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IP6-ICMPv6-LISPGpe-IP6
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 bridge\
-| ... | domains and neighbors. LISPoIPv6 tunnel is configured between\
-| ... | DUT1 and DUT2.
-| ... | *[Ver] TG verification:* Test ICMPv6 Echo Request packets are sent in\
-| ... | both directions by TG on links to DUT1 and DUT2; on receive\
-| ... | TG verifies packets for correctness and their IPv6 src-addr, dst-addr\
-| ... | and MAC addresses.
-| ... | *[Ref] Applicable standard specifications:* RFC6830.
-
-*** Test Cases ***
-| TC01: Route IPv6 packet through LISP with Bridge Domain setup.
-| | [Documentation]
-| | ... | [Top] TG-DUT1-DUT2-TG.
-| | ... | [Enc] Eth-IP6-ICMPv6-LISPGpe-IP6
-| | ... | [Cfg] Configure IPv6 LISP static adjacencies on DUT1 and DUT2. Also\
-| | ... | configure BD and assign it to LISP VNI.
-| | ... | [Ver] Make TG send ICMPv6 Echo Req between its interfaces across both\
-| | ... | DUTs and LISP tunnel between them; verify IPv6, Ether headers on\
-| | ... | received packets are correct.
-| | ... | [Ref] RFC6830.
-| | ...
-| | Given Configure path in 3-node circular topology
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
-| | And Set interfaces in 3-node circular topology up
-| | And Configure IP addresses on interfaces
-| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip6} | ${prefix6}
-| | ... | ${dut1_node} | ${dut1_to_tg} | ${dut1_to_tg_ip6} | ${prefix6}
-| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_dut1_ip6} | ${prefix6}
-| | ... | ${dut2_node} | ${dut2_to_tg} | ${dut2_to_tg_ip6} | ${prefix6}
-| | And Add Arp On Dut | ${dut2_node} | ${dut2_to_tg} | ${tg2_ip6}
-| | ... | ${tg_to_dut2_mac}
-| | And Add Arp On Dut | ${dut1_node} | ${dut1_to_tg} | ${tg1_ip6}
-| | ... | ${tg_to_dut1_mac}
-| | And Add Arp On Dut | ${dut1_node} | ${dut1_to_dut2} | ${dut2_to_dut1_ip6}
-| | ... | ${dut2_to_dut1_mac}
-| | And Add Arp On Dut | ${dut2_node} | ${dut2_to_dut1} | ${dut1_to_dut2_ip6}
-| | ... | ${dut1_to_dut2_mac}
-| | And Vpp All RA Suppress Link Layer | ${nodes}
-| | When Create L2 BD | ${dut1_node} | ${vpp_bd_id}
-| | And Add Interface To L2 BD | ${dut1_node} | ${dut1_to_tg} | ${vpp_bd_id}
-| | And Create L2 BD | ${dut2_node} | ${vpp_bd_id}
-| | And Add Interface To L2 BD | ${dut2_node} | ${dut2_to_tg} | ${vpp_bd_id}
-| | And Configure L2 LISP on DUT | ${dut1_node}
-| | ... | ${dut1_to_dut2_ip6_static_adjacency}
-| | ... | ${lisp_dut_settings}
-| | And Configure L2 LISP on DUT | ${dut2_node}
-| | ... | ${dut2_to_dut1_ip6_static_adjacency}
-| | ... | ${lisp_dut_settings}
-| | Then Send packet and verify headers
-| | ... | ${tg_node} | ${tg1_ip6} | ${tg2_ip6}
-| | ... | ${tg_to_dut1} | ${tg_if1_mac} | ${tg_if2_mac}
-| | ... | ${tg_to_dut2} | ${tg_if1_mac} | ${tg_if2_mac}
-| | And Send packet and verify headers
-| | ... | ${tg_node} | ${tg2_ip6} | ${tg1_ip6}
-| | ... | ${tg_to_dut2} | ${tg_if2_mac} | ${tg_if1_mac}
-| | ... | ${tg_to_dut1} | ${tg_if2_mac} | ${tg_if1_mac}