CSIT-450: Refactor LISP files

-change file names to appropriate
-move tests to appropriate files

Change-Id: Icadd7b8dcee503f4026d340bbfdba488145b8c9d
Signed-off-by: Zdeno Olsovsky <zolsovsk@cisco.com>

1 files changed, 0 insertions, 266 deletions

diff --git a/tests/func/lisp/lisp_ipv4_lispgpe_ipv4.robot b/tests/func/lisp/lisp_ipv4_lispgpe_ipv4.robot
deleted file mode 100644
index 13af66f862..0000000000
--- a/tests/func/lisp/lisp_ipv4_lispgpe_ipv4.robot
+++ /dev/null
@@ -1,266 +0,0 @@
-# Copyright (c) 2016 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Library | resources.libraries.python.topology.Topology
-| Library | resources.libraries.python.NodePath
-| Library | resources.libraries.python.Trace
-| Library | resources.libraries.python.IPUtil
-| Library | resources.libraries.python.InterfaceUtil
-| Library | resources.libraries.python.VhostUser
-| Resource | resources/libraries/robot/traffic.robot
-| Resource | resources/libraries/robot/default.robot
-| Resource | resources/libraries/robot/interfaces.robot
-| Resource | resources/libraries/robot/testing_path.robot
-| Resource | resources/libraries/robot/ipv4.robot
-| Resource | resources/libraries/robot/vrf.robot
-| Resource | resources/libraries/robot/qemu.robot
-| Resource | resources/libraries/robot/bridge_domain.robot
-| Resource | resources/libraries/robot/lisp/lispgpe.robot
-# Import configuration and test data:
-| Variables | resources/test_data/lisp/ipv4_lispgpe_ipv4/ipv4_lispgpe_ipv4.py
-| ...
-| Force Tags | 3_NODE_SINGLE_LINK_TOPO | VM_ENV | LISP
-| ...
-| Test Setup | Run Keywords | Setup all DUTs before test
-| ...        | AND          | Setup all TGs before traffic script
-| ...        | AND          | Update All Interface Data On All Nodes | ${nodes}
-| Test Teardown | Run Keywords | Show Packet Trace on All DUTs | ${nodes}
-| ...           | AND          | Show vpp trace dump on all DUTs
-| ...           | AND          | VPP Show Errors | ${nodes['DUT1']}
-| ...           | AND          | VPP Show Errors | ${nodes['DUT2']}
-| ...
-| Documentation | *ip4-lispgpe-ip4 encapsulation test cases*
-| ...
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-LISP-IPv4-ICMPv4 on DUT1-DUT2,\
-| ... | Eth-IPv4-ICMPv4 on TG-DUTn for IPv4 routing over LISPoIPv4 tunnel.
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4\
-| ... | routing and static routes. LISPoIPv4 tunnel is configured between\
-| ... | DUT1 and DUT2.
-| ... | *[Ver] TG verification:* Test ICMPv4 Echo Request packets are sent in\
-| ... | both directions by TG on links to DUT1 and DUT2; on receive\
-| ... | TG verifies packets for correctness and their IPv4 src-addr, dst-addr\
-| ... | and MAC addresses.
-| ... | *[Ref] Applicable standard specifications:* RFC6830.
-
-*** Test Cases ***
-| TC01: DUT1 and DUT2 route IPv4 bidirectionally over LISP GPE tunnel using physical interfaces
-| | [Documentation]
-| | ... | [Top] TG-DUT1-DUT2-TG.
-| | ... | [Enc] Eth-IPv4-LISPGPE-IPv4-ICMPv4 on DUT1-DUT2, Eth-IPv4-ICMPv4 on\
-| | ... | TG-DUTn.
-| | ... | [Cfg] Configure IPv4 LISP static adjacencies on DUT1 and DUT2.
-| | ... | [Ver] Case: ip4-lispgpe-ip4 - phy2lisp
-| | ... | Make TG send ICMPv4 Echo Req between its interfaces across both\
-| | ... | DUTs and LISP GPE tunnel between them; verify IPv4 headers on\
-| | ... | received packets are correct.
-| | ... | [Ref] RFC6830.
-| | ...
-| | Given Path for 3-node testing is set
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
-| | And Interfaces in 3-node path are up
-| | And IP addresses are set on interfaces
-| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip4} | ${prefix4}
-| | ... | ${dut1_node} | ${dut1_to_tg} | ${dut1_to_tg_ip4} | ${prefix4}
-| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_dut1_ip4} | ${prefix4}
-| | ... | ${dut2_node} | ${dut2_to_tg} | ${dut2_to_tg_ip4} | ${prefix4}
-| | And VPP IP Probe | ${dut1_node} | ${dut1_to_dut2} | ${dut2_to_dut1_ip4}
-| | And VPP IP Probe | ${dut2_node} | ${dut2_to_dut1} | ${dut1_to_dut2_ip4}
-| | And Add Arp On Dut | ${dut2_node} | ${dut2_to_tg} | ${tg2_ip4}
-| | ... | ${tg_to_dut2_mac}
-| | And Add Arp On Dut | ${dut1_node} | ${dut1_to_tg} | ${tg1_ip4}
-| | ... | ${tg_to_dut1_mac}
-| | When Set up LISP GPE topology
-| | ... | ${dut1_node} | ${dut1_to_dut2} | ${NONE}
-| | ... | ${dut2_node} | ${dut2_to_dut1} | ${NONE}
-| | ... | ${duts_locator_set} | ${dut1_ip4_eid} | ${dut2_ip4_eid}
-| | ... | ${dut1_to_dut2_ip4_static_adjacency}
-| | ... | ${dut2_to_dut1_ip4_static_adjacency}
-| | Then Send Packet And Check Headers
-| | ... | ${tg_node} | ${tg1_ip4} | ${tg2_ip4}
-| | ... | ${tg_to_dut1} | ${tg_to_dut1_mac} | ${dut1_to_tg_mac}
-| | ... | ${tg_to_dut2} | ${dut2_to_tg_mac} | ${tg_to_dut2_mac}
-| | And Send Packet And Check Headers
-| | ... | ${tg_node} | ${tg2_ip4} | ${tg1_ip4}
-| | ... | ${tg_to_dut2} | ${tg_to_dut2_mac} | ${dut2_to_tg_mac}
-| | ... | ${tg_to_dut1} | ${dut1_to_tg_mac} | ${tg_to_dut1_mac}
-
-| TC02: DUT1 and DUT2 route IPv4 bidirectionally over LISP GPE tunnel using physical interfaces and VRF is enabled
-| | [Documentation]
-| | ... | [Top] TG-DUT1-DUT2-TG.
-| | ... | [Enc] Eth-IPv4-LISPGPE-IPv4-ICMPv4 on DUT1-DUT2, Eth-IPv4-ICMPv4 on\
-| | ... | TG-DUTn.
-| | ... | [Cfg] Configure IPv4 LISP static adjacencies on DUT1 and DUT2.
-| | ... | [Ver] Case: ip4-lispgpe-ip4 - vrf, phy2lisp
-| | ... | Make TG send ICMPv4 Echo Req between its interfaces across both\
-| | ... | DUTs and LISP GPE tunnel between them; verify IPv4 headers on\
-| | ... | received packets are correct.
-| | ... | [Ref] RFC6830.
-| | ...
-| | [Teardown] | Run Keywords | Show Packet Trace on All DUTs | ${nodes}
-| | ... | AND | Show vpp trace dump on all DUTs
-| | ... | AND | VPP Show Errors | ${nodes['DUT1']}
-| | ... | AND | VPP Show Errors | ${nodes['DUT2']}
-| | ... | AND | Run keyword if test passed | Fail
-| | ...
-| | [Tags] | EXPECTED_FAILING
-| | ...
-| | Given Path for 3-node testing is set
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
-| | And Interfaces in 3-node path are up
-| | And Set up LISP GPE topology
-| | ... | ${dut1_node} | ${dut1_to_dut2} | ${NONE}
-| | ... | ${dut2_node} | ${dut2_to_dut1} | ${NONE}
-| | ... | ${duts_locator_set} | ${dut1_ip4_eid} | ${dut2_ip4_eid}
-| | ... | ${dut1_to_dut2_ip4_static_adjacency}
-| | ... | ${dut2_to_dut1_ip4_static_adjacency}
-| | And IP addresses are set on interfaces
-| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip4} | ${prefix4}
-| | ... | ${dut1_node} | ${dut1_to_tg} | ${dut1_to_tg_ip4} | ${prefix4}
-| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_dut1_ip4} | ${prefix4}
-| | ... | ${dut2_node} | ${dut2_to_tg} | ${dut2_to_tg_ip4} | ${prefix4}
-| | When Setup VRF on DUT | ${dut1_node} | ${dut1_fib_table} | ${dut1_to_dut2}
-| | ... | ${dut2_to_dut1_ip4} | ${dut2_to_dut1_mac} | ${tg2_ip4} | ${dut1_to_tg}
-| | ... | ${tg1_ip4} | ${tg_to_dut1_mac} | ${prefix4}
-| | And Setup VRF on DUT | ${dut2_node} | ${dut2_fib_table} | ${dut2_to_dut1}
-| | ... | ${dut1_to_dut2_ip4} | ${dut1_to_dut2_mac} | ${tg1_ip4} | ${dut2_to_tg}
-| | ... | ${tg2_ip4} | ${tg_to_dut2_mac} | ${prefix4}
-| | Then Send Packet And Check Headers
-| | ... | ${tg_node} | ${tg1_ip4} | ${tg2_ip4}
-| | ... | ${tg_to_dut1} | ${tg_to_dut1_mac} | ${dut1_to_tg_mac}
-| | ... | ${tg_to_dut2} | ${dut2_to_tg_mac} | ${tg_to_dut2_mac}
-| | And Send Packet And Check Headers
-| | ... | ${tg_node} | ${tg2_ip4} | ${tg1_ip4}
-| | ... | ${tg_to_dut2} | ${tg_to_dut2_mac} | ${dut2_to_tg_mac}
-| | ... | ${tg_to_dut1} | ${dut1_to_tg_mac} | ${tg_to_dut1_mac}
-
-| TC03: DUT1 and DUT2 route IPv4 bidirectionally over LISP GPE tunnel using vhost interfaces
-| | [Documentation]
-| | ... | [Top] TG-DUT1-DUT2-TG.
-| | ... | [Enc] Eth-IPv4-LISPGPE-IPv4-ICMPv4 on DUT1-DUT2, Eth-IPv4-ICMPv4 on\
-| | ... | TG-DUTn.
-| | ... | [Cfg] Configure IPv4 LISP static adjacencies on DUT1 and DUT2.
-| | ... | [Ver] Case: ip4-lispgpe-ip4 - main fib, virt2lisp
-| | ... | Make TG send ICMPv4 Echo Req between its interfaces across both\
-| | ... | DUTs and LISP GPE tunnel between them; verify IPv4 headers on\
-| | ... | received packets are correct.
-| | ...
-| | [Teardown] | Run Keywords | Show Packet Trace on All DUTs | ${nodes}
-| | ... | AND | Show vpp trace dump on all DUTs
-| | ... | AND | VPP Show Errors | ${nodes['DUT1']}
-| | ... | AND | VPP Show Errors | ${nodes['DUT2']}
-| | ... | AND | Stop and Clear QEMU | ${dut1_node} | ${vm_node}
-| | ...
-| | [Tags] | EXPECTED_FAILING
-| | ...
-| | Given Path for 3-node testing is set
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
-| | And Interfaces in 3-node path are up
-| | And IP addresses are set on interfaces
-| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip4} | ${prefix4}
-| | ... | ${dut1_node} | ${dut1_to_tg} | ${dut1_to_tg_ip4} | ${prefix4}
-| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_dut1_ip4} | ${prefix4}
-| | ... | ${dut2_node} | ${dut2_to_tg} | ${dut2_to_tg_ip4} | ${prefix4}
-| | And Add Arp On Dut | ${dut1_node} | ${dut1_to_tg} | ${tg1_ip4}
-| | ... | ${tg_to_dut1_mac}
-| | And Add Arp On Dut | ${dut2_node} | ${dut2_to_tg} | ${tg2_ip4}
-| | ... | ${tg_to_dut2_mac}
-| | And Add Arp On Dut | ${dut1_node} | ${dut1_to_dut2} | ${dut2_to_dut1_ip4}
-| | ... | ${dut2_to_dut1_mac}
-| | And Add Arp On Dut | ${dut2_node} | ${dut2_to_dut1} | ${dut1_to_dut2_ip4}
-| | ... | ${dut1_to_dut2_mac}
-| | When Set up LISP GPE topology
-| | ... | ${dut1_node} | ${dut1_to_dut2} | ${NONE}
-| | ... | ${dut2_node} | ${dut2_to_dut1} | ${NONE}
-| | ... | ${duts_locator_set} | ${dut1_ip4_eid} | ${dut2_ip4_eid}
-| | ... | ${dut1_to_dut2_ip4_static_adjacency}
-| | ... | ${dut2_to_dut1_ip4_static_adjacency}
-| | And Setup Qemu DUT1
-| | Then Send Packet And Check Headers
-| | ... | ${tg_node} | ${tg1_ip4} | ${tg2_ip4}
-| | ... | ${tg_to_dut1} | ${tg_to_dut1_mac} | ${dst_vhost_mac}
-| | ... | ${tg_to_dut2} | ${dut2_to_tg_mac} | ${tg_to_dut2_mac}
-| | And Send Packet And Check Headers
-| | ... | ${tg_node} | ${tg2_ip4} | ${tg1_ip4}
-| | ... | ${tg_to_dut2} | ${tg_to_dut2_mac} | ${dut2_to_tg_mac}
-| | ... | ${tg_to_dut1} | ${dut1_to_tg_mac} | ${tg_to_dut1_mac}
-
-| TC04: DUT1 and DUT2 route IPv4 bidirectionally over LISP GPE tunnel using vhost interfaces and VRF is enabled
-| | [Documentation]
-| | ... | [Top] TG-DUT1-DUT2-TG.
-| | ... | [Enc] Eth-IPv4-LISPGPE-IPv4-ICMPv4 on DUT1-DUT2, Eth-IPv4-ICMPv4 on\
-| | ... | TG-DUTn.
-| | ... | [Cfg] Configure IPv4 LISP static adjacencies on DUT1 and DUT2.
-| | ... | [Ver] Case: ip4-lispgpe-ip4 - vrf, virt2lisp
-| | ... | Make TG send ICMPv4 Echo Req between its interfaces across both\
-| | ... | DUTs and LISP GPE tunnel between them; verify IPv4 headers on\
-| | ... | received packets are correct.
-| | ... | [Ref] RFC6830.
-| | ...
-| | [Teardown] | Run Keywords | Show Packet Trace on All DUTs | ${nodes}
-| | ... | AND | Show vpp trace dump on all DUTs
-| | ... | AND | VPP Show Errors | ${nodes['DUT1']}
-| | ... | AND | VPP Show Errors | ${nodes['DUT2']}
-| | ... | AND | Stop and Clear QEMU | ${dut1_node} | ${vm_node}
-| | ...
-| | [Tags] | EXPECTED_FAILING
-| | ...
-| | Given Path for 3-node testing is set
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
-| | And Interfaces in 3-node path are up
-| | When Setup VRF on DUT | ${dut1_node} | ${dut1_fib_table} | ${dut1_to_dut2}
-| | ... | ${dut2_to_dut1_ip4} | ${dut2_to_dut1_mac} | ${tg2_ip4} | ${dut1_to_tg}
-| | ... | ${tg1_ip4} | ${tg_to_dut1_mac} | ${prefix4}
-| | And Setup VRF on DUT | ${dut2_node} | ${dut2_fib_table} | ${dut2_to_dut1}
-| | ... | ${dut1_to_dut2_ip4} | ${dut1_to_dut2_mac} | ${tg1_ip4} | ${dut2_to_tg}
-| | ... | ${tg2_ip4} | ${tg_to_dut2_mac} | ${prefix4}
-| | And IP addresses are set on interfaces
-| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip4} | ${prefix4}
-| | ... | ${dut1_node} | ${dut1_to_tg} | ${dut1_to_tg_ip4} | ${prefix4}
-| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_dut1_ip4} | ${prefix4}
-| | ... | ${dut2_node} | ${dut2_to_tg} | ${dut2_to_tg_ip4} | ${prefix4}
-| | And Set up LISP GPE topology
-| | ... | ${dut1_node} | ${dut1_to_dut2} | ${NONE}
-| | ... | ${dut2_node} | ${dut2_to_dut1} | ${NONE}
-| | ... | ${duts_locator_set} | ${dut1_ip4_eid} | ${dut2_ip4_eid}
-| | ... | ${dut1_to_dut2_ip4_static_adjacency}
-| | ... | ${dut2_to_dut1_ip4_static_adjacency}
-| | And Setup Qemu DUT1
-| | Then Send Packet And Check Headers
-| | ... | ${tg_node} | ${tg1_ip4} | ${tg2_ip4}
-| | ... | ${tg_to_dut1} | ${tg_to_dut1_mac} | ${dst_vhost_mac}
-| | ... | ${tg_to_dut2} | ${dut2_to_tg_mac} | ${tg_to_dut2_mac}
-| | And Send Packet And Check Headers
-| | ... | ${tg_node} | ${tg2_ip4} | ${tg1_ip4}
-| | ... | ${tg_to_dut2} | ${tg_to_dut2_mac} | ${dut2_to_tg_mac}
-| | ... | ${tg_to_dut1} | ${dut1_to_tg_mac} | ${tg_to_dut1_mac}
-
-*** Keywords ***
-| Setup Qemu DUT1
-| | [Documentation] | Setup Vhosts on DUT1 and setup IP on one of them. Setup\
-| | ... | Qemu and bridge the vhosts.
-| | ...
-| | ${vhost1}= | Vpp Create Vhost User Interface | ${dut1_node} | ${sock1}
-| | ${vhost2}= | Vpp Create Vhost User Interface | ${dut1_node} | ${sock2}
-| | Set Interface State | ${dut1_node} | ${vhost1} | up
-| | Set Interface State | ${dut1_node} | ${vhost2} | up
-| | Bridge domain on DUT node is created | ${dut1_node} | ${bid} | learn=${TRUE}
-| | Interface is added to bridge domain | ${dut1_node}
-| | ... | ${dut1_to_tg} | ${bid} | 0
-| | Interface is added to bridge domain | ${dut1_node}
-| | ... | ${vhost1} | ${bid} | 0
-| | ${vhost_mac}= | Get Vhost User Mac By SW Index | ${dut1_node} | ${vhost2}
-| | Set test variable | ${dst_vhost_mac} | ${vhost_mac}
-| | VM for Vhost L2BD forwarding is setup | ${dut1_node} | ${sock1} | ${sock2}