csit-func-tc-naming-change - phase 1

- change of ts directories
- change of ts file names
- splitting of former files to more files when suitable
- more details:
  https://wiki.fd.io/view/CSIT/csit-perf-tc-naming-change

Change-Id: Ifda1038f8323735f86c1be7ba7f93e3fda183618
Signed-off-by: Jan Gelety <jgelety@cisco.com>

1 files changed, 161 insertions, 0 deletions

diff --git a/tests/func/policer/eth2p-ethip6-ip6base-ipolicemarkbase-func.robot b/tests/func/policer/eth2p-ethip6-ip6base-ipolicemarkbase-func.robot
new file mode 100644
index 0000000000..6a7ae1a306
--- /dev/null
+++ b/tests/func/policer/eth2p-ethip6-ip6base-ipolicemarkbase-func.robot
@@ -0,0 +1,161 @@
+# Copyright (c) 2016 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Force Tags | 3_NODE_DOUBLE_LINK_TOPO | VM_ENV | HW_ENV
+| Resource | resources/libraries/robot/policer.robot
+| Library | resources.libraries.python.Trace
+| Test Setup | Run Keywords | Func Test Setup
+| ...        | AND          | Setup Topology for IPv6 policer testing
+| Test Teardown | Func Test Teardown
+| Documentation | *IPv6 policer test cases*
+| ...
+| ... | *[Top] Network topologies:* TG=DUT1 2-node topology with two links\
+| ... | between nodes.
+| ... | *[Cfg] DUT configuration:* On DUT1 configure interfaces IPv6 adresses,\
+| ... | and static neighbor record on the second interface.
+| ... | *[Ver] TG verification:* Test packet is sent from TG on the first link\
+| ... | to DUT1. Packet is received on TG on the second link from DUT1.
+| ... | *[Ref] Applicable standard specifications:* RFC2474, RFC2697, RFC2698.
+
+*** Variables ***
+| ${tg_to_dut_if1_ip6}= | 3ffe:5f::2
+| ${tg_to_dut_if2_ip6}= | 3ffe:60::2
+| ${dut_to_tg_if1_ip6}= | 3ffe:5f::1
+| ${dut_to_tg_if2_ip6}= | 3ffe:60::1
+| ${ip6_plen}= | ${64}
+
+| ${cir}= | ${100}
+| ${eir}= | ${150}
+| ${cb}= | ${200}
+| ${eb}= | ${300}
+
+*** Test Cases ***
+| TC01: VPP policer 2R3C Color-aware marks packet
+| | [Documentation]
+| | ... | [Top] TG=DUT1.
+| | ... | [Ref] RFC2474, RFC2698.
+| | ... | [Cfg] On DUT1 configure 2R3C color-aware policer on the first\
+| | ... | interface.
+| | ... | [Ver] TG sends IPv6 TCP packet on the first link to DUT1.\
+| | ... | On DUT1 packet is marked with DSCP tag. Verify if DUT1 sends\
+| | ... | correct IPv6 TCP packet with correct DSCP on the second link to TG.
+| | ${dscp}= | DSCP AF22
+| | Given Policer Set Name | policer1
+| | And Policer Set Node | ${dut_node}
+| | And Policer Set CIR | ${cir}
+| | And Policer Set EIR | ${eir}
+| | And Policer Set CB | ${cb}
+| | And Policer Set EB | ${eb}
+| | And Policer Set Rate Type pps
+| | And Policer Set Round Type Closest
+| | And Policer Set Type 2R3C 2698
+| | And Policer Set Conform Action Transmit
+| | And Policer Set Exceed Action Mark and Transmit | ${dscp}
+| | And Policer Set Violate Action Drop
+| | And Policer Enable Color Aware
+| | And Policer Classify Set Precolor Exceed
+| | And Policer Classify Set Interface | ${dut_to_tg_if1}
+| | And Policer Classify Set Match IP | ${tg_to_dut_if1_ip}
+| | When Policer Set Configuration
+| | Then Send Packet and Verify Marking | ${tg_node} | ${tg_to_dut_if1}
+| | ... | ${tg_to_dut_if2} | ${tg_to_dut_if1_mac} | ${dut_to_tg_if1_mac}
+| | ... | ${tg_to_dut_if1_ip} | ${tg_to_dut_if2_ip} | ${dscp}
+
+| TC02: VPP policer 2R3C Color-blind marks packet
+| | [Documentation]
+| | ... | [Top] TG=DUT1.
+| | ... | [Ref] RFC2474, RFC2698.
+| | ... | [Cfg] On DUT1 configure 2R3C color-blind policer on the first\
+| | ... | interface.
+| | ... | [Ver] TG sends IPv6 TCP packet on the first link to DUT1.\
+| | ... | On DUT1 packet is marked with DSCP tag. Verify if DUT1 sends\
+| | ... | correct IPv6 TCP packet with correct DSCP on the second link to TG.
+| | ${dscp}= | DSCP AF22
+| | Given Policer Set Name | policer1
+| | And Policer Set Node | ${dut_node}
+| | And Policer Set CIR | ${cir}
+| | And Policer Set EIR | ${eir}
+| | And Policer Set CB | ${cb}
+| | And Policer Set EB | ${eb}
+| | And Policer Set Rate Type pps
+| | And Policer Set Round Type Closest
+| | And Policer Set Type 2R3C 2698
+| | And Policer Set Conform Action Mark and Transmit | ${dscp}
+| | And Policer Set Exceed Action Transmit
+| | And Policer Set Violate Action Drop
+| | And Policer Classify Set Precolor Conform
+| | And Policer Classify Set Interface | ${dut_to_tg_if1}
+| | And Policer Classify Set Match IP | ${tg_to_dut_if1_ip}
+| | When Policer Set Configuration
+| | Then Send Packet and Verify Marking | ${tg_node} | ${tg_to_dut_if1}
+| | ... | ${tg_to_dut_if2} | ${tg_to_dut_if1_mac} | ${dut_to_tg_if1_mac}
+| | ... | ${tg_to_dut_if1_ip} | ${tg_to_dut_if2_ip} | ${dscp}
+
+| TC03: VPP policer 1R3C Color-aware marks packet
+| | [Documentation]
+| | ... | [Top] TG=DUT1.
+| | ... | [Ref] RFC2474, RFC2697.
+| | ... | [Cfg] On DUT1 configure 1R3C color-aware policer on the first\
+| | ... | interface.
+| | ... | [Ver] TG sends IPv6 TCP packet on the first link to DUT1.\
+| | ... | On DUT1 packet is marked with DSCP tag. Verify if DUT1 sends\
+| | ... | correct IPv6 TCP packet with correct DSCP on the second link to TG.
+| | ${dscp}= | DSCP AF22
+| | Given Policer Set Name | policer1
+| | And Policer Set Node | ${dut_node}
+| | And Policer Set CIR | ${1}
+| | And Policer Set CB | ${2}
+| | And Policer Set EB | ${eb}
+| | And Policer Set Rate Type pps
+| | And Policer Set Round Type Closest
+| | And Policer Set Type 1R3C
+| | And Policer Set Conform Action Transmit
+| | And Policer Set Exceed Action Mark and Transmit | ${dscp}
+| | And Policer Set Violate Action Drop
+| | And Policer Enable Color Aware
+| | And Policer Classify Set Precolor Exceed
+| | And Policer Classify Set Interface | ${dut_to_tg_if1}
+| | And Policer Classify Set Match IP | ${tg_to_dut_if1_ip}
+| | When Policer Set Configuration
+| | Then Send Packet and Verify Marking | ${tg_node} | ${tg_to_dut_if1}
+| | ... | ${tg_to_dut_if2} | ${tg_to_dut_if1_mac} | ${dut_to_tg_if1_mac}
+| | ... | ${tg_to_dut_if1_ip} | ${tg_to_dut_if2_ip} | ${dscp}
+
+| TC04: VPP policer 1R3C Color-blind marks packet
+| | [Documentation]
+| | ... | [Top] TG=DUT1.
+| | ... | [Ref] RFC2474, RFC2697.
+| | ... | [Cfg] On DUT1 configure 1R3C color-blind policer on the first\
+| | ... | interface.
+| | ... | [Ver] TG sends IPv6 TCP packet on the first link to DUT1.\
+| | ... | On DUT1 packet is marked with DSCP tag. Verify if DUT1 sends\
+| | ... | correct IPv6 TCP packet with correct DSCP on the second link to TG.
+| | ${dscp}= | DSCP AF22
+| | Given Policer Set Name | policer1
+| | And Policer Set Node | ${dut_node}
+| | And Policer Set CIR | ${cir}
+| | And Policer Set CB | ${cb}
+| | And Policer Set Rate Type pps
+| | And Policer Set Round Type Closest
+| | And Policer Set Type 1R3C
+| | And Policer Set Conform Action Mark and Transmit | ${dscp}
+| | And Policer Set Exceed Action Transmit
+| | And Policer Set Violate Action Drop
+| | And Policer Classify Set Precolor Conform
+| | And Policer Classify Set Interface | ${dut_to_tg_if1}
+| | And Policer Classify Set Match IP | ${tg_to_dut_if1_ip}
+| | When Policer Set Configuration
+| | Then Send Packet and Verify Marking | ${tg_node} | ${tg_to_dut_if1}
+| | ... | ${tg_to_dut_if2} | ${tg_to_dut_if1_mac} | ${dut_to_tg_if1_mac}
+| | ... | ${tg_to_dut_if1_ip} | ${tg_to_dut_if2_ip} | ${dscp}