csit-func-tc-naming-change - phase 1

- change of ts directories
- change of ts file names
- splitting of former files to more files when suitable
- more details:
  https://wiki.fd.io/view/CSIT/csit-perf-tc-naming-change

Change-Id: Ifda1038f8323735f86c1be7ba7f93e3fda183618
Signed-off-by: Jan Gelety <jgelety@cisco.com>

6 files changed, 298 insertions, 168 deletions

diff --git a/tests/func/telemetry/ipfix_ipv4.robot b/tests/func/telemetry/ipfix/eth2p-ethip4-ip4base-ip4ipfixbase-func.robot
index 1c85d1f8a4..f3b02722cc 100644
--- a/tests/func/telemetry/ipfix_ipv4.robot
+++ b/tests/func/telemetry/ipfix/eth2p-ethip4-ip4base-ip4ipfixbase-func.robot
@@ -21,8 +21,7 @@
 | Library | resources.libraries.python.telemetry.IPFIXSetup
 | Library | resources.libraries.python.Trace
 
-| Force Tags | HW_ENV | VM_ENV | 3_NODE_SINGLE_LINK_TOPO | EXPECTED_FAILING
-# TODO: Remove EXPECTED_FAILING tag once functionality is implemented (VPP-204)
+| Force Tags | HW_ENV | VM_ENV | 3_NODE_SINGLE_LINK_TOPO
 | Test Setup | Func Test Setup
 | Test Teardown | Func Test Teardown
 | Documentation | *IPFIX ipv4 test cases*
@@ -41,7 +40,6 @@
 | ${prefix_length}= | 24
 | ${ip_version}= | ip4
 | ${port}= | 80
-| ${sessions}= | 80
 
 *** Test Cases ***
 | TC01: DUT sends IPFIX template and data packets
@@ -199,69 +197,4 @@
 | | ... | ${tg_to_dut1} | ${dut1_to_tg} | ${tg_to_dut1_ip} | ${dut1_to_tg_ip}
 | | ... | port=${port}
 
-| TC06: DUT reports packet flow with a large number of packets
-| | [Documentation]
-| | ... | [Top] TG-DUT1-DUT2-TG. [Cfg] On DUT1 configure IPFIX with TG interface
-| | ... | address as collector and add classify session with TG source address.
-| | ... | [Ver] Make TG send packets to DUT1, then listen for IPFIX template
-| | ... | and data packets, verify that IPFIX reported the received packets.
-| | ... | [Ref] RFC 7011
-| | Given Path for 3-node testing is set
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
-| | And Interfaces in 3-node path are up
-| | And Set Interface Address | ${dut1_node}
-| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length}
-| | And Add ARP on DUT | ${dut1_node} | ${dut1_to_tg} | ${tg_to_dut1_ip}
-| | ... | ${tg_to_dut1_mac}
-| | ${table_index} | ${skip_n} | ${match_n}=
-| | ... | And VPP creates classify table L3 | ${dut1_node} | ${ip_version} | src
-| | And VPP configures classify session L3 | ${dut1_node} | permit
-| | ... | ${table_index} | ${skip_n} | ${match_n} | ${ip_version} | src
-| | ... | ${tg_to_dut1_ip}
-| | When Assign interface to flow table | ${dut1_node} | ${dut1_to_tg}
-| | ... | ${table_index} | ip_version=${ip_version}
-| | And setup IPFIX exporter | ${dut1_node} | ${tg_to_dut1_ip}
-| | ... | ${dut1_to_tg_ip} | interval=5
-| | And Set IPFIX stream | ${dut1_node} | ${1}
-| | And Assign classify table to exporter | ${dut1_node} | ${table_index}
-| | ... | ${ip_version}
-| | Then Send packets and verify IPFIX | ${tg_node} | ${dut1_node}
-| | ... | ${tg_to_dut1} | ${dut1_to_tg} | ${tg_to_dut1_ip} | ${dut1_to_tg_ip}
-| | ... | count=20000 | timeout=10
-
-| TC07: DUT reports packet flow when multiple sessions are configured
-| | [Documentation]
-| | ... | [Top] TG-DUT1-DUT2-TG. [Cfg] On DUT1 configure IPFIX with TG interface
-| | ... | address as collector and add several classify sessions with different
-| | ... | ports.
-| | ... | [Ver] Make TG send packets to DUT1 using a range of ports matching
-| | ... | configured sessions, then listen for IPFIX template and data packets,
-| | ... | verify that IPFIX reported the received packets for each session.
-| | ... | [Ref] RFC 7011
-| | Given Path for 3-node testing is set
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
-| | And Interfaces in 3-node path are up
-| | And Set Interface Address | ${dut1_node}
-| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length}
-| | And Add ARP on DUT | ${dut1_node} | ${dut1_to_tg} | ${tg_to_dut1_ip}
-| | ... | ${tg_to_dut1_mac}
-| | ${table_index} | ${skip_n} | ${match_n}=
-| | ... | And VPP creates classify table L3 | ${dut1_node} | ${ip_version}
-| | ... | src proto l4 src_port dst_port
-| | :FOR | ${index} | IN RANGE | ${sessions}
-| | | VPP configures classify session generic | ${dut1_node}
-| | | ... | acl-hit-next permit | ${table_index} | ${skip_n} | ${match_n}
-| | | ... | l3 ${ip_version} src ${tg_to_dut1_ip}
-| | | ... | proto 6 l4 src_port ${index} dst_port ${index}
-| | When Assign interface to flow table | ${dut1_node} | ${dut1_to_tg}
-| | ... | ${table_index} | ip_version=${ip_version}
-| | And setup IPFIX exporter | ${dut1_node} | ${tg_to_dut1_ip}
-| | ... | ${dut1_to_tg_ip}
-| | ... | mtu=1450 | interval=5
-| | And Set IPFIX stream | ${dut1_node} | ${1}
-| | And Assign classify table to exporter | ${dut1_node} | ${table_index}
-| | ... | ${ip_version}
-| | Then Send session sweep and verify IPFIX | ${tg_node} | ${dut1_node}
-| | ... | ${tg_to_dut1} | ${dut1_to_tg} | ${tg_to_dut1_ip} | ${dut1_to_tg_ip}
-| | ... | ${sessions} | timeout=10 | count=3
 # TODO: DUT reports packet flow when ACL is configured with wildcards
diff --git a/tests/func/telemetry/ipfix/eth2p-ethip4-ip4base-ip4ipfixscale-func.robot b/tests/func/telemetry/ipfix/eth2p-ethip4-ip4base-ip4ipfixscale-func.robot
new file mode 100644
index 0000000000..1331f1c883
--- /dev/null
+++ b/tests/func/telemetry/ipfix/eth2p-ethip4-ip4base-ip4ipfixscale-func.robot
@@ -0,0 +1,110 @@
+# Copyright (c) 2016 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/default.robot
+| Resource | resources/libraries/robot/interfaces.robot
+| Resource | resources/libraries/robot/testing_path.robot
+| Resource | resources/libraries/robot/ipv4.robot
+| Resource | resources/libraries/robot/telemetry/ipfix.robot
+| Library | resources.libraries.python.Classify.Classify
+| Library | resources.libraries.python.telemetry.IPFIXSetup
+| Library | resources.libraries.python.Trace
+
+| Force Tags | HW_ENV | VM_ENV | 3_NODE_SINGLE_LINK_TOPO
+| Test Setup | Func Test Setup
+| Test Teardown | Func Test Teardown
+| Documentation | *IPFIX ipv4 test cases*
+| ...
+| ... | IPFIX tests use 3-node topology TG - DUT1 - DUT2 - TG with
+| ... | one link between the nodes. DUT1 is configured with IPv4
+| ... | routing and static routes. IPFIX is configured on DUT1 with
+| ... | DUT1->TG interface as collector. Test packets are
+| ... | sent from TG to DUT1. TG listens for flow report packets
+| ... | and verifies that they contains flow record of test packets sent.
+
+*** Variables ***
+| ${dut1_to_tg_ip}= | 192.168.1.1
+| ${tg_to_dut1_ip}= | 192.168.1.2
+| ${prefix_length}= | 24
+| ${ip_version}= | ip4
+| ${sessions}= | 80
+
+*** Test Cases ***
+| TC01: DUT reports packet flow with a large number of packets
+| | [Documentation]
+| | ... | [Top] TG-DUT1-DUT2-TG. [Cfg] On DUT1 configure IPFIX with TG interface
+| | ... | address as collector and add classify session with TG source address.
+| | ... | [Ver] Make TG send packets to DUT1, then listen for IPFIX template
+| | ... | and data packets, verify that IPFIX reported the received packets.
+| | ... | [Ref] RFC 7011
+| | Given Path for 3-node testing is set
+| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
+| | And Interfaces in 3-node path are up
+| | And Set Interface Address | ${dut1_node}
+| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length}
+| | And Add ARP on DUT | ${dut1_node} | ${dut1_to_tg} | ${tg_to_dut1_ip}
+| | ... | ${tg_to_dut1_mac}
+| | ${table_index} | ${skip_n} | ${match_n}=
+| | ... | And VPP creates classify table L3 | ${dut1_node} | ${ip_version} | src
+| | And VPP configures classify session L3 | ${dut1_node} | permit
+| | ... | ${table_index} | ${skip_n} | ${match_n} | ${ip_version} | src
+| | ... | ${tg_to_dut1_ip}
+| | When Assign interface to flow table | ${dut1_node} | ${dut1_to_tg}
+| | ... | ${table_index} | ip_version=${ip_version}
+| | And setup IPFIX exporter | ${dut1_node} | ${tg_to_dut1_ip}
+| | ... | ${dut1_to_tg_ip} | interval=5
+| | And Set IPFIX stream | ${dut1_node} | ${1}
+| | And Assign classify table to exporter | ${dut1_node} | ${table_index}
+| | ... | ${ip_version}
+| | Then Send packets and verify IPFIX | ${tg_node} | ${dut1_node}
+| | ... | ${tg_to_dut1} | ${dut1_to_tg} | ${tg_to_dut1_ip} | ${dut1_to_tg_ip}
+| | ... | count=20000 | timeout=10
+
+| TC02: DUT reports packet flow when multiple sessions are configured
+| | [Documentation]
+| | ... | [Top] TG-DUT1-DUT2-TG. [Cfg] On DUT1 configure IPFIX with TG interface
+| | ... | address as collector and add several classify sessions with different
+| | ... | ports.
+| | ... | [Ver] Make TG send packets to DUT1 using a range of ports matching
+| | ... | configured sessions, then listen for IPFIX template and data packets,
+| | ... | verify that IPFIX reported the received packets for each session.
+| | ... | [Ref] RFC 7011
+| | Given Path for 3-node testing is set
+| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
+| | And Interfaces in 3-node path are up
+| | And Set Interface Address | ${dut1_node}
+| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length}
+| | And Add ARP on DUT | ${dut1_node} | ${dut1_to_tg} | ${tg_to_dut1_ip}
+| | ... | ${tg_to_dut1_mac}
+| | ${table_index} | ${skip_n} | ${match_n}=
+| | ... | And VPP creates classify table L3 | ${dut1_node} | ${ip_version}
+| | ... | src proto l4 src_port dst_port
+| | :FOR | ${index} | IN RANGE | ${sessions}
+| | | VPP configures classify session generic | ${dut1_node}
+| | | ... | acl-hit-next permit | ${table_index} | ${skip_n} | ${match_n}
+| | | ... | l3 ${ip_version} src ${tg_to_dut1_ip}
+| | | ... | proto 6 l4 src_port ${index} dst_port ${index}
+| | When Assign interface to flow table | ${dut1_node} | ${dut1_to_tg}
+| | ... | ${table_index} | ip_version=${ip_version}
+| | And setup IPFIX exporter | ${dut1_node} | ${tg_to_dut1_ip}
+| | ... | ${dut1_to_tg_ip}
+| | ... | mtu=1450 | interval=5
+| | And Set IPFIX stream | ${dut1_node} | ${1}
+| | And Assign classify table to exporter | ${dut1_node} | ${table_index}
+| | ... | ${ip_version}
+| | Then Send session sweep and verify IPFIX | ${tg_node} | ${dut1_node}
+| | ... | ${tg_to_dut1} | ${dut1_to_tg} | ${tg_to_dut1_ip} | ${dut1_to_tg_ip}
+| | ... | ${sessions} | timeout=10 | count=3
+
+# TODO: DUT reports packet flow when ACL is configured with wildcards
diff --git a/tests/func/telemetry/ipfix_ipv6.robot b/tests/func/telemetry/ipfix/eth2p-ethip6-ip6base-ip6ipfixbase-func.robot
index b8310b2a13..8451eb6940 100644
--- a/tests/func/telemetry/ipfix_ipv6.robot
+++ b/tests/func/telemetry/ipfix/eth2p-ethip6-ip6base-ip6ipfixbase-func.robot
@@ -42,7 +42,6 @@
 | ${prefix_length}= | 64
 | ${ip_version}= | ip6
 | ${port}= | 80
-| ${sessions}= | 45
 
 # IPv4 addresses used for IPFIX exporter. Export over IPv6 not (yet?) supported.
 | ${dut1_to_tg_ip4}= | 192.168.1.1
@@ -195,80 +194,4 @@
 | | ... | ${tg_to_dut1} | ${dut1_to_tg} | ${tg_to_dut1_ip} | ${dut1_to_tg_ip}
 | | ... | port=${port}
 
-| TC05: DUT reports packet flow with a large number of packets
-| | [Documentation]
-| | ... | [Top] TG-DUT1-DUT2-TG. [Cfg] On DUT1 configure IPFIX with TG interface
-| | ... | address as collector and add classify session with TG source address.
-| | ... | [Ver] Make TG send packets to DUT1, then listen for IPFIX template
-| | ... | and data packets, verify that IPFIX reported the received packets.
-| | ... | [Ref] RFC 7011
-| | Given Path for 3-node testing is set
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
-| | And Interfaces in 3-node path are up
-| | And Set Interface Address | ${dut1_node}
-| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length}
-| | And Set Interface Address | ${dut1_node}
-| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip4} | ${24}
-| | And Add ARP on DUT | ${dut1_node} | ${dut1_to_tg} | ${tg_to_dut1_ip4}
-| | ... | ${tg_to_dut1_mac}
-| | And Add ARP on DUT | ${dut1_node} | ${dut1_to_tg} | ${tg_to_dut1_ip}
-| | ... | ${tg_to_dut1_mac}
-| | And VPP RA suppress link layer | ${dut1_node} | ${dut1_to_tg}
-| | ${table_index} | ${skip_n} | ${match_n}=
-| | ... | And VPP creates classify table L3 | ${dut1_node} | ${ip_version} | src
-| | And VPP configures classify session L3 | ${dut1_node} | permit
-| | ... | ${table_index} | ${skip_n} | ${match_n} | ${ip_version} | src
-| | ... | ${tg_to_dut1_ip}
-| | When Assign interface to flow table | ${dut1_node} | ${dut1_to_tg}
-| | ... | ${table_index} | ip_version=${ip_version}
-| | And setup IPFIX exporter | ${dut1_node} | ${tg_to_dut1_ip4}
-| | ... | ${dut1_to_tg_ip4} | interval=5
-| | And Set IPFIX stream | ${dut1_node} | ${1}
-| | And Assign classify table to exporter | ${dut1_node} | ${table_index}
-| | ... | ${ip_version}
-| | Then Send packets and verify IPFIX | ${tg_node} | ${dut1_node}
-| | ... | ${tg_to_dut1} | ${dut1_to_tg} | ${tg_to_dut1_ip} | ${dut1_to_tg_ip}
-| | ... | count=20000 | timeout=10
-
-| TC06: DUT reports packet flow when multiple sessions are configured
-| | [Documentation]
-| | ... | [Top] TG-DUT1-DUT2-TG. [Cfg] On DUT1 configure IPFIX with TG interface
-| | ... | address as collector and add several classify sessions with different
-| | ... | ports.
-| | ... | [Ver] Make TG send packets to DUT1 using a range of ports matching
-| | ... | configured sessions, then listen for IPFIX template and data packets,
-| | ... | verify that IPFIX reported the received packets for each session.
-| | ... | [Ref] RFC 7011
-| | Given Path for 3-node testing is set
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
-| | And Interfaces in 3-node path are up
-| | And Set Interface Address | ${dut1_node}
-| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length}
-| | And Set Interface Address | ${dut1_node}
-| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip4} | ${24}
-| | And Add ARP on DUT | ${dut1_node} | ${dut1_to_tg} | ${tg_to_dut1_ip4}
-| | ... | ${tg_to_dut1_mac}
-| | And Add ARP on DUT | ${dut1_node} | ${dut1_to_tg} | ${tg_to_dut1_ip}
-| | ... | ${tg_to_dut1_mac}
-| | And VPP RA suppress link layer | ${dut1_node} | ${dut1_to_tg}
-| | ${table_index} | ${skip_n} | ${match_n}=
-| | ... | And VPP creates classify table L3 | ${dut1_node} | ${ip_version}
-| | ... | src proto l4 src_port dst_port
-| | :FOR | ${index} | IN RANGE | ${sessions}
-| | | VPP configures classify session generic | ${dut1_node}
-| | | ... | acl-hit-next permit | ${table_index} | ${skip_n} | ${match_n}
-| | | ... | l3 ${ip_version} src ${tg_to_dut1_ip}
-| | | ... | proto 6 l4 src_port ${index} dst_port ${index}
-| | When Assign interface to flow table | ${dut1_node} | ${dut1_to_tg}
-| | ... | ${table_index} | ip_version=${ip_version}
-| | And setup IPFIX exporter | ${dut1_node} | ${tg_to_dut1_ip4}
-| | ... | ${dut1_to_tg_ip4} | interval=5
-| | ... | mtu=1450 | interval=5
-| | And Set IPFIX stream | ${dut1_node} | ${1}
-| | And Assign classify table to exporter | ${dut1_node} | ${table_index}
-| | ... | ${ip_version}
-| | Then Send session sweep and verify IPFIX | ${tg_node} | ${dut1_node}
-| | ... | ${tg_to_dut1} | ${dut1_to_tg} | ${tg_to_dut1_ip} | ${dut1_to_tg_ip}
-| | ... | ${sessions} | timeout=10 | count=3
-
 # TODO: DUT reports packet flow when ACL is configured with wildcards
diff --git a/tests/func/telemetry/ipfix/eth2p-ethip6-ip6base-ip6ipfixscale-func.robot b/tests/func/telemetry/ipfix/eth2p-ethip6-ip6base-ip6ipfixscale-func.robot
new file mode 100644
index 0000000000..125e8b92af
--- /dev/null
+++ b/tests/func/telemetry/ipfix/eth2p-ethip6-ip6base-ip6ipfixscale-func.robot
@@ -0,0 +1,126 @@
+# Copyright (c) 2016 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/default.robot
+| Resource | resources/libraries/robot/interfaces.robot
+| Resource | resources/libraries/robot/testing_path.robot
+| Resource | resources/libraries/robot/ipv4.robot
+| Resource | resources/libraries/robot/telemetry/ipfix.robot
+| Library | resources.libraries.python.Classify.Classify
+| Library | resources.libraries.python.telemetry.IPFIXSetup
+| Library | resources.libraries.python.IPv6Setup
+| Library | resources.libraries.python.Trace
+
+| Force Tags | HW_ENV | VM_ENV | 3_NODE_SINGLE_LINK_TOPO | EXPECTED_FAILING
+# TODO: Remove EXPECTED_FAILING tag once functionality is implemented (VPP-204)
+| Test Setup | Func Test Setup
+| Test Teardown | Func Test Teardown
+| Documentation | *IPFIX ipv6 test cases*
+| ...
+| ... | IPFIX tests use 3-node topology TG - DUT1 - DUT2 - TG with
+| ... | one link between the nodes. DUT1 is configured with IPv4 and IPV6
+| ... | routing and static routes. IPFIX is configured on DUT1 with
+| ... | DUT1->TG interface as collector.Test packets are
+| ... | sent from TG to or through DUT1. TG listens for flow report packets
+| ... | and verifies that they contains flow records of test packets sent.
+
+*** Variables ***
+| ${dut1_to_tg_ip}= | 10::10
+| ${tg_to_dut1_ip}= | 12::10
+| ${prefix_length}= | 64
+| ${ip_version}= | ip6
+| ${sessions}= | 45
+
+# IPv4 addresses used for IPFIX exporter. Export over IPv6 not (yet?) supported.
+| ${dut1_to_tg_ip4}= | 192.168.1.1
+| ${tg_to_dut1_ip4}= | 192.168.1.2
+
+*** Test Cases ***
+| TC01: DUT reports packet flow with a large number of packets
+| | [Documentation]
+| | ... | [Top] TG-DUT1-DUT2-TG. [Cfg] On DUT1 configure IPFIX with TG interface
+| | ... | address as collector and add classify session with TG source address.
+| | ... | [Ver] Make TG send packets to DUT1, then listen for IPFIX template
+| | ... | and data packets, verify that IPFIX reported the received packets.
+| | ... | [Ref] RFC 7011
+| | Given Path for 3-node testing is set
+| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
+| | And Interfaces in 3-node path are up
+| | And Set Interface Address | ${dut1_node}
+| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length}
+| | And Set Interface Address | ${dut1_node}
+| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip4} | ${24}
+| | And Add ARP on DUT | ${dut1_node} | ${dut1_to_tg} | ${tg_to_dut1_ip4}
+| | ... | ${tg_to_dut1_mac}
+| | And Add ARP on DUT | ${dut1_node} | ${dut1_to_tg} | ${tg_to_dut1_ip}
+| | ... | ${tg_to_dut1_mac}
+| | And VPP RA suppress link layer | ${dut1_node} | ${dut1_to_tg}
+| | ${table_index} | ${skip_n} | ${match_n}=
+| | ... | And VPP creates classify table L3 | ${dut1_node} | ${ip_version} | src
+| | And VPP configures classify session L3 | ${dut1_node} | permit
+| | ... | ${table_index} | ${skip_n} | ${match_n} | ${ip_version} | src
+| | ... | ${tg_to_dut1_ip}
+| | When Assign interface to flow table | ${dut1_node} | ${dut1_to_tg}
+| | ... | ${table_index} | ip_version=${ip_version}
+| | And setup IPFIX exporter | ${dut1_node} | ${tg_to_dut1_ip4}
+| | ... | ${dut1_to_tg_ip4} | interval=5
+| | And Set IPFIX stream | ${dut1_node} | ${1}
+| | And Assign classify table to exporter | ${dut1_node} | ${table_index}
+| | ... | ${ip_version}
+| | Then Send packets and verify IPFIX | ${tg_node} | ${dut1_node}
+| | ... | ${tg_to_dut1} | ${dut1_to_tg} | ${tg_to_dut1_ip} | ${dut1_to_tg_ip}
+| | ... | count=20000 | timeout=10
+
+| TC02: DUT reports packet flow when multiple sessions are configured
+| | [Documentation]
+| | ... | [Top] TG-DUT1-DUT2-TG. [Cfg] On DUT1 configure IPFIX with TG interface
+| | ... | address as collector and add several classify sessions with different
+| | ... | ports.
+| | ... | [Ver] Make TG send packets to DUT1 using a range of ports matching
+| | ... | configured sessions, then listen for IPFIX template and data packets,
+| | ... | verify that IPFIX reported the received packets for each session.
+| | ... | [Ref] RFC 7011
+| | Given Path for 3-node testing is set
+| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
+| | And Interfaces in 3-node path are up
+| | And Set Interface Address | ${dut1_node}
+| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length}
+| | And Set Interface Address | ${dut1_node}
+| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip4} | ${24}
+| | And Add ARP on DUT | ${dut1_node} | ${dut1_to_tg} | ${tg_to_dut1_ip4}
+| | ... | ${tg_to_dut1_mac}
+| | And Add ARP on DUT | ${dut1_node} | ${dut1_to_tg} | ${tg_to_dut1_ip}
+| | ... | ${tg_to_dut1_mac}
+| | And VPP RA suppress link layer | ${dut1_node} | ${dut1_to_tg}
+| | ${table_index} | ${skip_n} | ${match_n}=
+| | ... | And VPP creates classify table L3 | ${dut1_node} | ${ip_version}
+| | ... | src proto l4 src_port dst_port
+| | :FOR | ${index} | IN RANGE | ${sessions}
+| | | VPP configures classify session generic | ${dut1_node}
+| | | ... | acl-hit-next permit | ${table_index} | ${skip_n} | ${match_n}
+| | | ... | l3 ${ip_version} src ${tg_to_dut1_ip}
+| | | ... | proto 6 l4 src_port ${index} dst_port ${index}
+| | When Assign interface to flow table | ${dut1_node} | ${dut1_to_tg}
+| | ... | ${table_index} | ip_version=${ip_version}
+| | And setup IPFIX exporter | ${dut1_node} | ${tg_to_dut1_ip4}
+| | ... | ${dut1_to_tg_ip4} | interval=5
+| | ... | mtu=1450 | interval=5
+| | And Set IPFIX stream | ${dut1_node} | ${1}
+| | And Assign classify table to exporter | ${dut1_node} | ${table_index}
+| | ... | ${ip_version}
+| | Then Send session sweep and verify IPFIX | ${tg_node} | ${dut1_node}
+| | ... | ${tg_to_dut1} | ${dut1_to_tg} | ${tg_to_dut1_ip} | ${dut1_to_tg_ip}
+| | ... | ${sessions} | timeout=10 | count=3
+
+# TODO: DUT reports packet flow when ACL is configured with wildcards
diff --git a/tests/func/telemetry/span.robot b/tests/func/telemetry/span/eth2p-ethip4-ip4base-spanrx-func.robot
index 8a7af5f0d1..62f76d847d 100644
--- a/tests/func/telemetry/span.robot
+++ b/tests/func/telemetry/span/eth2p-ethip4-ip4base-spanrx-func.robot
@@ -36,8 +36,6 @@
 *** Variables ***
 | ${tg_to_dut_if1_ip4}= | 192.168.1.1
 | ${dut_to_tg_if1_ip4}= | 192.168.1.2
-| ${tg_to_dut_if1_ip6}= | 11::1
-| ${dut_to_tg_if1_ip6}= | 10::1
 | ${prefix}= | 24
 
 *** Test Cases ***
@@ -80,24 +78,3 @@
 | | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac}
 | | ... | ${dut_to_tg__if1_mac} | ${tg_to_dut_if2}
 | | ... | ${tg_to_dut_if1_ip4} | ${dut_to_tg_if1_ip4} | ICMP
-
-| TC03: DUT mirrors IPv6 packets from one interface to another
-| | [Documentation]
-| | ... | [Top] TG=DUT1
-| | ... | [Cfg] On DUT1 configure IPv6 address, add ARP entry for one TG \
-| | ... | interface and set SPAN mirroring from one DUT interface to the other.
-| | ... | [Ver] Make TG send an ICMP packet to DUT through one interface,\
-| | ... | then receive a copy of sent packet and of DUT's ICMP reply\
-| | ... | on the other interface.
-| | Given Path For 2-node Testing Is Set | ${nodes['TG']} | ${nodes['DUT1']}
-| | ... | ${nodes['TG']}
-| | And Interfaces In 2-node Path Are Up
-| | And Set interface Address | ${dut_node} | ${dut_to_tg_if1}
-| | ... | ${dut_to_tg_if1_ip6} | ${prefix}
-| | And Add ARP on DUT | ${dut_node} | ${dut_to_tg_if1} | ${tg_to_dut_if1_ip6}
-| | ... | ${tg_to_dut_if1_mac}
-| | And Set SPAN Mirroring | ${dut_node} | ${dut_to_tg_if1} | ${dut_to_tg_if2}
-| | Then Send Packet And Check Received Copies | ${tg_node}
-| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac}
-| | ... | ${dut_to_tg__if1_mac} | ${tg_to_dut_if2}
-| | ... | ${tg_to_dut_if1_ip6} | ${dut_to_tg_if1_ip6} | ICMP
diff --git a/tests/func/telemetry/span/eth2p-ethip6-ip6base-spanrx-func.robot b/tests/func/telemetry/span/eth2p-ethip6-ip6base-spanrx-func.robot
new file mode 100644
index 0000000000..5fa7d0c5e4
--- /dev/null
+++ b/tests/func/telemetry/span/eth2p-ethip6-ip6base-spanrx-func.robot
@@ -0,0 +1,61 @@
+# Copyright (c) 2016 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/default.robot
+| Resource | resources/libraries/robot/testing_path.robot
+| Resource | resources/libraries/robot/telemetry/span.robot
+| Library  | resources.libraries.python.Trace
+| Library  | resources.libraries.python.IPv4Util
+| Library  | resources.libraries.python.IPv4Setup
+| Library  | resources.libraries.python.telemetry.SPAN
+| Force Tags | HW_ENV | VM_ENV | 3_NODE_DOUBLE_LINK_TOPO | EXPECTED_FAILING
+# TODO: Remove EXPECTED_FAILING tag once functionality is implemented (VPP-185)
+| Test Setup | Func Test Setup
+| Test Teardown | Func Test Teardown
+| Documentation | *SPAN test suite*
+| ... | *[Top] Network Topologies:* TG=DUT1 2-node topology with two
+| ... | links between nodes.
+| ... | *[Cfg] DUT configuration:* DUT1 is configured with SPAN mirroring from
+| ... | the first DUT1-TG interface to the second one.
+| ... | *[Ver] TG verification:* Test ARP or ICMP packets are sent by TG
+| ... | on first link to DUT1; On receipt through second link TG verifies
+| ... | the copy of packet sent and the copy of DUT's reply packet.
+| ... | *[Ref] Applicable standard specifications: None?*
+
+*** Variables ***
+| ${tg_to_dut_if1_ip6}= | 11::1
+| ${dut_to_tg_if1_ip6}= | 10::1
+| ${prefix}= | 24
+
+*** Test Cases ***
+| TC01: DUT mirrors IPv6 packets from one interface to another
+| | [Documentation]
+| | ... | [Top] TG=DUT1
+| | ... | [Cfg] On DUT1 configure IPv6 address, add ARP entry for one TG \
+| | ... | interface and set SPAN mirroring from one DUT interface to the other.
+| | ... | [Ver] Make TG send an ICMP packet to DUT through one interface,\
+| | ... | then receive a copy of sent packet and of DUT's ICMP reply\
+| | ... | on the other interface.
+| | Given Path For 2-node Testing Is Set | ${nodes['TG']} | ${nodes['DUT1']}
+| | ... | ${nodes['TG']}
+| | And Interfaces In 2-node Path Are Up
+| | And Set interface Address | ${dut_node} | ${dut_to_tg_if1}
+| | ... | ${dut_to_tg_if1_ip6} | ${prefix}
+| | And Add ARP on DUT | ${dut_node} | ${dut_to_tg_if1} | ${tg_to_dut_if1_ip6}
+| | ... | ${tg_to_dut_if1_mac}
+| | And Set SPAN Mirroring | ${dut_node} | ${dut_to_tg_if1} | ${dut_to_tg_if2}
+| | Then Send Packet And Check Received Copies | ${tg_node}
+| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac}
+| | ... | ${dut_to_tg__if1_mac} | ${tg_to_dut_if2}
+| | ... | ${tg_to_dut_if1_ip6} | ${dut_to_tg_if1_ip6} | ICMP