CSIT-687: Directory structure reorganization

Change-Id: I772c9e214be2461adf58124998d272e7d795220f
Signed-off-by: Tibor Frank <tifrank@cisco.com>
Signed-off-by: Maciek Konstantynowicz <mkonstan@cisco.com>

6 files changed, 0 insertions, 780 deletions

diff --git a/tests/func/telemetry/ipfix/eth2p-ethip4-ip4base-ip4ipfixbase-func.robot b/tests/func/telemetry/ipfix/eth2p-ethip4-ip4base-ip4ipfixbase-func.robot
deleted file mode 100644
index e5ec8dce9a..0000000000
--- a/tests/func/telemetry/ipfix/eth2p-ethip4-ip4base-ip4ipfixbase-func.robot
+++ /dev/null
@@ -1,201 +0,0 @@
-# Copyright (c) 2016 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Resource | resources/libraries/robot/default.robot
-| Resource | resources/libraries/robot/interfaces.robot
-| Resource | resources/libraries/robot/testing_path.robot
-| Resource | resources/libraries/robot/ipv4.robot
-| Resource | resources/libraries/robot/telemetry/ipfix.robot
-| Library | resources.libraries.python.Classify.Classify
-| Library | resources.libraries.python.telemetry.IPFIXSetup
-| Library | resources.libraries.python.Trace
-
-| Force Tags | HW_ENV | VM_ENV | 3_NODE_SINGLE_LINK_TOPO | EXPECTED_FAILING
-| Test Setup | Set up functional test
-| Test Teardown | Tear down functional test
-| Documentation | *IPFIX ipv4 test cases*
-| ...
-| ... | IPFIX tests use 3-node topology TG - DUT1 - DUT2 - TG with
-| ... | one link between the nodes. DUT1 is configured with IPv4
-| ... | routing and static routes. IPFIX is configured on DUT1 with
-| ... | DUT1->TG interface as collector. Test packets are
-| ... | sent from TG to DUT1. TG listens for flow report packets
-| ... | and verifies that they contains flow record of test packets sent.
-
-*** Variables ***
-| ${dut1_to_tg_ip}= | 192.168.1.1
-| ${tg_to_dut1_ip}= | 192.168.1.2
-| ${dut2_to_dut1_ip}= | 192.168.2.1
-| ${prefix_length}= | 24
-| ${ip_version}= | ip4
-| ${port}= | 80
-
-*** Test Cases ***
-| TC01: DUT sends IPFIX template and data packets
-| | [Documentation]
-| | ... | [Top] TG-DUT1-DUT2-TG. [Cfg] On DUT1 configure IPFIX with TG interface
-| | ... | address as collector and a basic classify session.
-| | ... | [Ver] Make TG listen for IPFIX template and data packets, verify
-| | ... | that packet is received and correct. No packets are sent from TG.
-| | ... | [Ref] RFC 7011
-| | Given Configure path in 3-node circular topology
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
-| | And Set interfaces in 3-node circular topology up
-| | And Set Interface Address | ${dut1_node}
-| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length}
-| | And Add ARP on DUT | ${dut1_node} | ${dut1_to_tg} | ${tg_to_dut1_ip}
-| | ... | ${tg_to_dut1_mac}
-| | ${table_index} | ${skip_n} | ${match_n}=
-| | ... | And VPP creates classify table L3 | ${dut1_node} | ${ip_version} | src
-| | And VPP configures classify session L3 | ${dut1_node} | permit
-| | ... | ${table_index} | ${skip_n} | ${match_n} | ${ip_version} | src
-| | ... | ${tg_to_dut1_ip}
-| | When Assign interface to flow table | ${dut1_node} | ${dut1_to_tg}
-| | ... | ${table_index} | ip_version=${ip_version}
-| | And Setup IPFIX exporter | ${dut1_node} | ${tg_to_dut1_ip}
-| | ... | ${dut1_to_tg_ip} | interval=5
-| | And Set IPFIX stream | ${dut1_node} | ${1}
-| | And Assign classify table to exporter | ${dut1_node} | ${table_index}
-| | ... | ${ip_version}
-| | Then Send packets and verify IPFIX | ${tg_node} | ${dut1_node}
-| | ... | ${tg_to_dut1} | ${dut1_to_tg} | ${tg_to_dut1_ip} | ${dut1_to_tg_ip}
-| | ... | count=0
-
-| TC02: DUT reports packet flow for traffic by source address
-| | [Documentation]
-| | ... | [Top] TG-DUT1-DUT2-TG. [Cfg] On DUT1 configure IPFIX with TG interface
-| | ... | address as collector and add classify session with TG source address.
-| | ... | [Ver] Make TG send a packet to DUT1, then listen for IPFIX template
-| | ... | and data packets, verify that IPFIX reported the received packet.
-| | ... | [Ref] RFC 7011
-| | Given Configure path in 3-node circular topology
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
-| | And Set interfaces in 3-node circular topology up
-| | And Set Interface Address | ${dut1_node}
-| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length}
-| | And Add ARP on DUT | ${dut1_node} | ${dut1_to_tg} | ${tg_to_dut1_ip}
-| | ... | ${tg_to_dut1_mac}
-| | ${table_index} | ${skip_n} | ${match_n}=
-| | ... | And VPP creates classify table L3 | ${dut1_node} | ${ip_version} | src
-| | And VPP configures classify session L3 | ${dut1_node} | permit
-| | ... | ${table_index} | ${skip_n} | ${match_n} | ${ip_version} | src
-| | ... | ${tg_to_dut1_ip}
-| | When Assign interface to flow table | ${dut1_node} | ${dut1_to_tg}
-| | ... | ${table_index} | ip_version=${ip_version}
-| | And Setup IPFIX exporter | ${dut1_node} | ${tg_to_dut1_ip}
-| | ... | ${dut1_to_tg_ip} | interval=5
-| | And Set IPFIX stream | ${dut1_node} | ${1}
-| | And Assign classify table to exporter | ${dut1_node} | ${table_index}
-| | ... | ${ip_version}
-| | Then Send packets and verify IPFIX | ${tg_node} | ${dut1_node}
-| | ... | ${tg_to_dut1} | ${dut1_to_tg} | ${tg_to_dut1_ip} | ${dut1_to_tg_ip}
-
-| TC03: DUT reports packet flow for traffic with local destination address
-| | [Documentation]
-| | ... | [Top] TG-DUT1-DUT2-TG. [Cfg] On DUT1 configure IPFIX with TG interface
-| | ... | address as collector and add classify session with destination
-| | ... | address of DUT1.
-| | ... | [Ver] Make TG send a packet to DUT1, then listen for IPFIX template
-| | ... | and data packets, verify that IPFIX reported the received packet.
-| | ... | [Ref] RFC 7011
-| | Given Configure path in 3-node circular topology
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
-| | And Set interfaces in 3-node circular topology up
-| | And Set Interface Address | ${dut1_node}
-| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length}
-| | And Add ARP on DUT | ${dut1_node} | ${dut1_to_tg} | ${tg_to_dut1_ip}
-| | ... | ${tg_to_dut1_mac}
-| | ${table_index} | ${skip_n} | ${match_n}=
-| | ... | And VPP creates classify table L3 | ${dut1_node} | ${ip_version} | dst
-| | And VPP configures classify session L3 | ${dut1_node} | permit
-| | ... | ${table_index} | ${skip_n} | ${match_n} | ${ip_version} | dst
-| | ... | ${dut1_to_tg_ip}
-| | When Assign interface to flow table | ${dut1_node} | ${dut1_to_tg}
-| | ... | ${table_index} | ip_version=${ip_version}
-| | And Setup IPFIX exporter | ${dut1_node} | ${tg_to_dut1_ip}
-| | ... | ${dut1_to_tg_ip} | interval=5
-| | And Set IPFIX stream | ${dut1_node} | ${1}
-| | And Assign classify table to exporter | ${dut1_node} | ${table_index}
-| | ... | ${ip_version}
-| | Then Send packets and verify IPFIX | ${tg_node} | ${dut1_node}
-| | ... | ${tg_to_dut1} | ${dut1_to_tg} | ${tg_to_dut1_ip} | ${dut1_to_tg_ip}
-
-| TC04: DUT reports packet flow for traffic with remote destination address
-| | [Documentation]
-| | ... | [Top] TG-DUT1-DUT2-TG. [Cfg] On DUT1 configure IPFIX with TG interface
-| | ... | address as collector and add classify session with destination
-| | ... | address of DUT2.
-| | ... | [Ver] Make TG send a packet to DUT2 through DUT1, then listen
-| | ... | for IPFIX template and data packets, verify that IPFIX reported
-| | ... | the received packet.
-| | ... | [Ref] RFC 7011
-| | Given Configure path in 3-node circular topology
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
-| | And Set interfaces in 3-node circular topology up
-| | And Set Interface Address | ${dut1_node}
-| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length}
-| | And Add ARP on DUT | ${dut1_node} | ${dut1_to_tg} | ${tg_to_dut1_ip}
-| | ... | ${tg_to_dut1_mac}
-| | And Add ARP on DUT | ${dut1_node} | ${dut1_to_dut2} | ${dut2_to_dut1_ip}
-| | ... | ${dut2_to_dut1_mac}
-| | ${table_index} | ${skip_n} | ${match_n}=
-| | ... | And VPP creates classify table L3 | ${dut1_node} | ${ip_version} | dst
-| | And VPP configures classify session L3 | ${dut1_node} | permit
-| | ... | ${table_index} | ${skip_n} | ${match_n} | ${ip_version} | dst
-| | ... | ${dut2_to_dut1_ip}
-| | When Assign interface to flow table | ${dut1_node} | ${dut1_to_tg}
-| | ... | ${table_index} | ip_version=${ip_version}
-| | And Setup IPFIX exporter | ${dut1_node} | ${tg_to_dut1_ip}
-| | ... | ${dut1_to_tg_ip} | interval=5
-| | And Set IPFIX stream | ${dut1_node} | ${1}
-| | And Assign classify table to exporter | ${dut1_node} | ${table_index}
-| | ... | ${ip_version}
-| | Then Send packets and verify IPFIX | ${tg_node} | ${dut1_node}
-| | ... | ${tg_to_dut1} | ${dut1_to_tg} | ${tg_to_dut1_ip} | ${dut2_to_dut1_ip}
-
-| TC05: DUT reports packet flow for traffic by source and destination port
-| | [Tags] | SKIP_VPP_PATCH
-| | [Documentation]
-| | ... | [Top] TG-DUT1-DUT2-TG. [Cfg] On DUT1 configure IPFIX with TG interface
-| | ... | address as collector and add classify session with TG source address
-| | ... | and source and destination ports.
-| | ... | [Ver] Make TG send a packet to DUT1, then listen for IPFIX template
-| | ... | and data packets, verify that IPFIX reported the received packet.
-| | ... | [Ref] RFC 7011
-| | Given Configure path in 3-node circular topology
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
-| | And Set interfaces in 3-node circular topology up
-| | And Set Interface Address | ${dut1_node}
-| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length}
-| | And Add ARP on DUT | ${dut1_node} | ${dut1_to_tg} | ${tg_to_dut1_ip}
-| | ... | ${tg_to_dut1_mac}
-| | ${table_index} | ${skip_n} | ${match_n}=
-| | ... | And VPP creates classify table L3 | ${dut1_node} | ${ip_version}
-| | ... | src proto l4 src_port dst_port
-| | And VPP configures classify session generic | ${dut1_node}
-| | ... | acl-hit-next permit | ${table_index} | ${skip_n} | ${match_n}
-| | ... | l3 ${ip_version} src ${tg_to_dut1_ip}
-| | ... | proto 6 l4 src_port ${port} dst_port ${port}
-| | When Assign interface to flow table | ${dut1_node} | ${dut1_to_tg}
-| | ... | ${table_index} | ip_version=${ip_version}
-| | And Setup IPFIX exporter | ${dut1_node} | ${tg_to_dut1_ip}
-| | ... | ${dut1_to_tg_ip} | interval=5
-| | And Set IPFIX stream | ${dut1_node} | ${1}
-| | And Assign classify table to exporter | ${dut1_node} | ${table_index}
-| | ... | ${ip_version}
-| | Then Send packets and verify IPFIX | ${tg_node} | ${dut1_node}
-| | ... | ${tg_to_dut1} | ${dut1_to_tg} | ${tg_to_dut1_ip} | ${dut1_to_tg_ip}
-| | ... | port=${port}
-
-# TODO: DUT reports packet flow when ACL is configured with wildcards
diff --git a/tests/func/telemetry/ipfix/eth2p-ethip4-ip4base-ip4ipfixscale-func.robot b/tests/func/telemetry/ipfix/eth2p-ethip4-ip4base-ip4ipfixscale-func.robot
deleted file mode 100644
index cfa67ee53e..0000000000
--- a/tests/func/telemetry/ipfix/eth2p-ethip4-ip4base-ip4ipfixscale-func.robot
+++ /dev/null
@@ -1,111 +0,0 @@
-# Copyright (c) 2016 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Resource | resources/libraries/robot/default.robot
-| Resource | resources/libraries/robot/interfaces.robot
-| Resource | resources/libraries/robot/testing_path.robot
-| Resource | resources/libraries/robot/ipv4.robot
-| Resource | resources/libraries/robot/telemetry/ipfix.robot
-| Library | resources.libraries.python.Classify.Classify
-| Library | resources.libraries.python.telemetry.IPFIXSetup
-| Library | resources.libraries.python.Trace
-
-| Force Tags | HW_ENV | VM_ENV | 3_NODE_SINGLE_LINK_TOPO | EXPECTED_FAILING
-| ...        | SKIP_VPP_PATCH
-| Test Setup | Set up functional test
-| Test Teardown | Tear down functional test
-| Documentation | *IPFIX ipv4 test cases*
-| ...
-| ... | IPFIX tests use 3-node topology TG - DUT1 - DUT2 - TG with
-| ... | one link between the nodes. DUT1 is configured with IPv4
-| ... | routing and static routes. IPFIX is configured on DUT1 with
-| ... | DUT1->TG interface as collector. Test packets are
-| ... | sent from TG to DUT1. TG listens for flow report packets
-| ... | and verifies that they contains flow record of test packets sent.
-
-*** Variables ***
-| ${dut1_to_tg_ip}= | 192.168.1.1
-| ${tg_to_dut1_ip}= | 192.168.1.2
-| ${prefix_length}= | 24
-| ${ip_version}= | ip4
-| ${sessions}= | 80
-
-*** Test Cases ***
-| TC01: DUT reports packet flow with a large number of packets
-| | [Documentation]
-| | ... | [Top] TG-DUT1-DUT2-TG. [Cfg] On DUT1 configure IPFIX with TG interface
-| | ... | address as collector and add classify session with TG source address.
-| | ... | [Ver] Make TG send packets to DUT1, then listen for IPFIX template
-| | ... | and data packets, verify that IPFIX reported the received packets.
-| | ... | [Ref] RFC 7011
-| | Given Configure path in 3-node circular topology
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
-| | And Set interfaces in 3-node circular topology up
-| | And Set Interface Address | ${dut1_node}
-| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length}
-| | And Add ARP on DUT | ${dut1_node} | ${dut1_to_tg} | ${tg_to_dut1_ip}
-| | ... | ${tg_to_dut1_mac}
-| | ${table_index} | ${skip_n} | ${match_n}=
-| | ... | And VPP creates classify table L3 | ${dut1_node} | ${ip_version} | src
-| | And VPP configures classify session L3 | ${dut1_node} | permit
-| | ... | ${table_index} | ${skip_n} | ${match_n} | ${ip_version} | src
-| | ... | ${tg_to_dut1_ip}
-| | When Assign interface to flow table | ${dut1_node} | ${dut1_to_tg}
-| | ... | ${table_index} | ip_version=${ip_version}
-| | And setup IPFIX exporter | ${dut1_node} | ${tg_to_dut1_ip}
-| | ... | ${dut1_to_tg_ip} | interval=5
-| | And Set IPFIX stream | ${dut1_node} | ${1}
-| | And Assign classify table to exporter | ${dut1_node} | ${table_index}
-| | ... | ${ip_version}
-| | Then Send packets and verify IPFIX | ${tg_node} | ${dut1_node}
-| | ... | ${tg_to_dut1} | ${dut1_to_tg} | ${tg_to_dut1_ip} | ${dut1_to_tg_ip}
-| | ... | count=20000 | timeout=10
-
-| TC02: DUT reports packet flow when multiple sessions are configured
-| | [Documentation]
-| | ... | [Top] TG-DUT1-DUT2-TG. [Cfg] On DUT1 configure IPFIX with TG interface
-| | ... | address as collector and add several classify sessions with different
-| | ... | ports.
-| | ... | [Ver] Make TG send packets to DUT1 using a range of ports matching
-| | ... | configured sessions, then listen for IPFIX template and data packets,
-| | ... | verify that IPFIX reported the received packets for each session.
-| | ... | [Ref] RFC 7011
-| | Given Configure path in 3-node circular topology
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
-| | And Set interfaces in 3-node circular topology up
-| | And Set Interface Address | ${dut1_node}
-| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length}
-| | And Add ARP on DUT | ${dut1_node} | ${dut1_to_tg} | ${tg_to_dut1_ip}
-| | ... | ${tg_to_dut1_mac}
-| | ${table_index} | ${skip_n} | ${match_n}=
-| | ... | And VPP creates classify table L3 | ${dut1_node} | ${ip_version}
-| | ... | src proto l4 src_port dst_port
-| | :FOR | ${index} | IN RANGE | ${sessions}
-| | | VPP configures classify session generic | ${dut1_node}
-| | | ... | acl-hit-next permit | ${table_index} | ${skip_n} | ${match_n}
-| | | ... | l3 ${ip_version} src ${tg_to_dut1_ip}
-| | | ... | proto 6 l4 src_port ${index} dst_port ${index}
-| | When Assign interface to flow table | ${dut1_node} | ${dut1_to_tg}
-| | ... | ${table_index} | ip_version=${ip_version}
-| | And setup IPFIX exporter | ${dut1_node} | ${tg_to_dut1_ip}
-| | ... | ${dut1_to_tg_ip}
-| | ... | mtu=1450 | interval=5
-| | And Set IPFIX stream | ${dut1_node} | ${1}
-| | And Assign classify table to exporter | ${dut1_node} | ${table_index}
-| | ... | ${ip_version}
-| | Then Send session sweep and verify IPFIX | ${tg_node} | ${dut1_node}
-| | ... | ${tg_to_dut1} | ${dut1_to_tg} | ${tg_to_dut1_ip} | ${dut1_to_tg_ip}
-| | ... | ${sessions} | timeout=10 | count=3
-
-# TODO: DUT reports packet flow when ACL is configured with wildcards
diff --git a/tests/func/telemetry/ipfix/eth2p-ethip6-ip6base-ip6ipfixbase-func.robot b/tests/func/telemetry/ipfix/eth2p-ethip6-ip6base-ip6ipfixbase-func.robot
deleted file mode 100644
index 8557c234d5..0000000000
--- a/tests/func/telemetry/ipfix/eth2p-ethip6-ip6base-ip6ipfixbase-func.robot
+++ /dev/null
@@ -1,198 +0,0 @@
-# Copyright (c) 2016 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Resource | resources/libraries/robot/default.robot
-| Resource | resources/libraries/robot/interfaces.robot
-| Resource | resources/libraries/robot/testing_path.robot
-| Resource | resources/libraries/robot/ipv4.robot
-| Resource | resources/libraries/robot/telemetry/ipfix.robot
-| Library | resources.libraries.python.Classify.Classify
-| Library | resources.libraries.python.telemetry.IPFIXSetup
-| Library | resources.libraries.python.IPv6Setup
-| Library | resources.libraries.python.Trace
-
-| Force Tags | HW_ENV | VM_ENV | 3_NODE_SINGLE_LINK_TOPO | EXPECTED_FAILING
-# TODO: Remove EXPECTED_FAILING tag once functionality is implemented (VPP-204)
-| Test Setup | Set up functional test
-| Test Teardown | Tear down functional test
-| Documentation | *IPFIX ipv6 test cases*
-| ...
-| ... | IPFIX tests use 3-node topology TG - DUT1 - DUT2 - TG with
-| ... | one link between the nodes. DUT1 is configured with IPv4 and IPV6
-| ... | routing and static routes. IPFIX is configured on DUT1 with
-| ... | DUT1->TG interface as collector.Test packets are
-| ... | sent from TG to or through DUT1. TG listens for flow report packets
-| ... | and verifies that they contains flow records of test packets sent.
-
-*** Variables ***
-| ${dut1_to_tg_ip}= | 10::10
-| ${dut2_to_dut1_ip}= | 11::10
-| ${tg_to_dut1_ip}= | 12::10
-| ${prefix_length}= | 64
-| ${ip_version}= | ip6
-| ${port}= | 80
-
-# IPv4 addresses used for IPFIX exporter. Export over IPv6 not (yet?) supported.
-| ${dut1_to_tg_ip4}= | 192.168.1.1
-| ${tg_to_dut1_ip4}= | 192.168.1.2
-
-*** Test Cases ***
-| TC01: DUT reports packet flow for traffic by source address
-| | [Documentation]
-| | ... | [Top] TG-DUT1-DUT2-TG. [Cfg] On DUT1 configure IPFIX with TG interface
-| | ... | address as collector and add classify session with TG source address.
-| | ... | [Ver] Make TG send a packet to DUT1, then listen for IPFIX template
-| | ... | and data packets, verify that IPFIX reported the received packet.
-| | ... | [Ref] RFC 7011
-| | Given Configure path in 3-node circular topology
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
-| | And Set interfaces in 3-node circular topology up
-| | And Set Interface Address | ${dut1_node}
-| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length}
-| | And Set Interface Address | ${dut1_node}
-| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip4} | ${24}
-| | And Add ARP on DUT | ${dut1_node} | ${dut1_to_tg} | ${tg_to_dut1_ip4}
-| | ... | ${tg_to_dut1_mac}
-| | And Add ARP on DUT | ${dut1_node} | ${dut1_to_tg} | ${tg_to_dut1_ip}
-| | ... | ${tg_to_dut1_mac}
-| | And VPP RA suppress link layer | ${dut1_node} | ${dut1_to_tg}
-| | ${table_index} | ${skip_n} | ${match_n}=
-| | ... | And VPP creates classify table L3 | ${dut1_node} | ${ip_version} | src
-| | And VPP configures classify session L3 | ${dut1_node} | permit
-| | ... | ${table_index} | ${skip_n} | ${match_n} | ${ip_version} | src
-| | ... | ${tg_to_dut1_ip}
-| | When Assign interface to flow table | ${dut1_node} | ${dut1_to_tg}
-| | ... | ${table_index} | ip_version=${ip_version}
-| | And setup IPFIX exporter | ${dut1_node} | ${tg_to_dut1_ip4}
-| | ... | ${dut1_to_tg_ip4} | interval=5
-| | And Set IPFIX stream | ${dut1_node} | ${1}
-| | And Assign classify table to exporter | ${dut1_node} | ${table_index}
-| | ... | ${ip_version}
-| | Then Send packets and verify IPFIX | ${tg_node} | ${dut1_node}
-| | ... | ${tg_to_dut1} | ${dut1_to_tg} | ${tg_to_dut1_ip} | ${dut1_to_tg_ip}
-
-| TC02: DUT reports packet flow for traffic with local destination address
-| | [Documentation]
-| | ... | [Top] TG-DUT1-DUT2-TG. [Cfg] On DUT1 configure IPFIX with TG interface
-| | ... | address as collector and add classify session with destination
-| | ... | address of DUT1.
-| | ... | [Ver] Make TG send a packet to DUT1, then listen for IPFIX template
-| | ... | and data packets, verify that IPFIX reported the received packet.
-| | ... | [Ref] RFC 7011
-| | Given Configure path in 3-node circular topology
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
-| | And Set interfaces in 3-node circular topology up
-| | And Set Interface Address | ${dut1_node}
-| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length}
-| | And Set Interface Address | ${dut1_node}
-| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip4} | ${24}
-| | And Add ARP on DUT | ${dut1_node} | ${dut1_to_tg} | ${tg_to_dut1_ip4}
-| | ... | ${tg_to_dut1_mac}
-| | And Add ARP on DUT | ${dut1_node} | ${dut1_to_tg} | ${tg_to_dut1_ip}
-| | ... | ${tg_to_dut1_mac}
-| | And VPP RA suppress link layer | ${dut1_node} | ${dut1_to_tg}
-| | ${table_index} | ${skip_n} | ${match_n}=
-| | ... | And VPP creates classify table L3 | ${dut1_node} | ${ip_version} | dst
-| | And VPP configures classify session L3 | ${dut1_node} | permit
-| | ... | ${table_index} | ${skip_n} | ${match_n} | ${ip_version} | dst
-| | ... | ${dut1_to_tg_ip}
-| | When Assign interface to flow table | ${dut1_node} | ${dut1_to_tg}
-| | ... | ${table_index} | ip_version=${ip_version}
-| | And setup IPFIX exporter | ${dut1_node} | ${tg_to_dut1_ip4}
-| | ... | ${dut1_to_tg_ip4} | interval=5
-| | And Set IPFIX stream | ${dut1_node} | ${1}
-| | And Assign classify table to exporter | ${dut1_node} | ${table_index}
-| | ... | ${ip_version}
-| | Then Send packets and verify IPFIX | ${tg_node} | ${dut1_node}
-| | ... | ${tg_to_dut1} | ${dut1_to_tg} | ${tg_to_dut1_ip} | ${dut1_to_tg_ip}
-
-| TC03: DUT reports packet flow for traffic with remote destination address
-| | [Documentation]
-| | ... | [Top] TG-DUT1-DUT2-TG. [Cfg] On DUT1 configure IPFIX with TG interface
-| | ... | address as collector and add classify session with destination
-| | ... | address of DUT2.
-| | ... | [Ver] Make TG send a packet to DUT2 through DUT1, then listen
-| | ... | for IPFIX template and data packets, verify that IPFIX reported
-| | ... | the received packet.
-| | ... | [Ref] RFC 7011
-| | Given Configure path in 3-node circular topology
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
-| | And Set interfaces in 3-node circular topology up
-| | And Set Interface Address | ${dut1_node}
-| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length}
-| | And Set Interface Address | ${dut1_node}
-| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip4} | ${24}
-| | And Add ARP on DUT | ${dut1_node} | ${dut1_to_tg} | ${tg_to_dut1_ip4}
-| | ... | ${tg_to_dut1_mac}
-| | And Add ARP on DUT | ${dut1_node} | ${dut1_to_tg} | ${tg_to_dut1_ip}
-| | ... | ${tg_to_dut1_mac}
-| | And Add ARP on DUT | ${dut1_node} | ${dut1_to_dut2} | ${dut2_to_dut1_ip}
-| | ... | ${dut2_to_dut1_mac}
-| | And VPP RA suppress link layer | ${dut1_node} | ${dut1_to_tg}
-| | ${table_index} | ${skip_n} | ${match_n}=
-| | ... | And VPP creates classify table L3 | ${dut1_node} | ${ip_version} | dst
-| | And VPP configures classify session L3 | ${dut1_node} | permit
-| | ... | ${table_index} | ${skip_n} | ${match_n} | ${ip_version} | dst
-| | ... | ${dut2_to_dut1_ip}
-| | When Assign interface to flow table | ${dut1_node} | ${dut1_to_tg}
-| | ... | ${table_index} | ip_version=${ip_version}
-| | And setup IPFIX exporter | ${dut1_node} | ${tg_to_dut1_ip4}
-| | ... | ${dut1_to_tg_ip4} | interval=5
-| | And Set IPFIX stream | ${dut1_node} | ${1}
-| | And Assign classify table to exporter | ${dut1_node} | ${table_index}
-| | ... | ${ip_version}
-| | Then Send packets and verify IPFIX | ${tg_node} | ${dut1_node}
-| | ... | ${tg_to_dut1} | ${dut1_to_tg} | ${tg_to_dut1_ip}
-| | ... | ${dut2_to_dut1_ip}
-
-| TC04: DUT reports packet flow for traffic by source and destination port
-| | [Tags] | SKIP_VPP_PATCH
-| | [Documentation]
-| | ... | [Top] TG-DUT1-DUT2-TG. [Cfg] On DUT1 configure IPFIX with TG interface
-| | ... | address as collector and add classify session with TG source address
-| | ... | and source and destination ports.
-| | ... | [Ver] Make TG send a packet to DUT1, then listen for IPFIX template
-| | ... | and data packets, verify that IPFIX reported the received packet.
-| | ... | [Ref] RFC 7011
-| | Given Configure path in 3-node circular topology
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
-| | And Set interfaces in 3-node circular topology up
-| | And Set Interface Address | ${dut1_node}
-| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length}
-| | And Set Interface Address | ${dut1_node}
-| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip4} | ${24}
-| | And Add ARP on DUT | ${dut1_node} | ${dut1_to_tg} | ${tg_to_dut1_ip4}
-| | ... | ${tg_to_dut1_mac}
-| | And Add ARP on DUT | ${dut1_node} | ${dut1_to_tg} | ${tg_to_dut1_ip}
-| | ... | ${tg_to_dut1_mac}
-| | And VPP RA suppress link layer | ${dut1_node} | ${dut1_to_tg}
-| | ${table_index} | ${skip_n} | ${match_n}=
-| | ... | And VPP creates classify table L3 | ${dut1_node} | ${ip_version}
-| | ... | src proto l4 src_port dst_port
-| | And VPP configures classify session generic | ${dut1_node}
-| | ... | acl-hit-next permit | ${table_index} | ${skip_n} | ${match_n}
-| | ... | l3 ${ip_version} src ${tg_to_dut1_ip}
-| | ... | proto 6 l4 src_port ${port} dst_port ${port}
-| | When Assign interface to flow table | ${dut1_node} | ${dut1_to_tg}
-| | ... | ${table_index} | ip_version=${ip_version}
-| | And setup IPFIX exporter | ${dut1_node} | ${tg_to_dut1_ip4}
-| | ... | ${dut1_to_tg_ip4} | interval=5
-| | And Set IPFIX stream | ${dut1_node} | ${1}
-| | And Assign classify table to exporter | ${dut1_node} | ${table_index}
-| | ... | ${ip_version}
-| | Then Send packets and verify IPFIX | ${tg_node} | ${dut1_node}
-| | ... | ${tg_to_dut1} | ${dut1_to_tg} | ${tg_to_dut1_ip} | ${dut1_to_tg_ip}
-| | ... | port=${port}
-
-# TODO: DUT reports packet flow when ACL is configured with wildcards
diff --git a/tests/func/telemetry/ipfix/eth2p-ethip6-ip6base-ip6ipfixscale-func.robot b/tests/func/telemetry/ipfix/eth2p-ethip6-ip6base-ip6ipfixscale-func.robot
deleted file mode 100644
index ee5caef306..0000000000
--- a/tests/func/telemetry/ipfix/eth2p-ethip6-ip6base-ip6ipfixscale-func.robot
+++ /dev/null
@@ -1,127 +0,0 @@
-# Copyright (c) 2016 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Resource | resources/libraries/robot/default.robot
-| Resource | resources/libraries/robot/interfaces.robot
-| Resource | resources/libraries/robot/testing_path.robot
-| Resource | resources/libraries/robot/ipv4.robot
-| Resource | resources/libraries/robot/telemetry/ipfix.robot
-| Library | resources.libraries.python.Classify.Classify
-| Library | resources.libraries.python.telemetry.IPFIXSetup
-| Library | resources.libraries.python.IPv6Setup
-| Library | resources.libraries.python.Trace
-
-| Force Tags | HW_ENV | VM_ENV | 3_NODE_SINGLE_LINK_TOPO | EXPECTED_FAILING
-| ...        | SKIP_VPP_PATCH
-# TODO: Remove EXPECTED_FAILING tag once functionality is implemented (VPP-204)
-| Test Setup | Set up functional test
-| Test Teardown | Tear down functional test
-| Documentation | *IPFIX ipv6 test cases*
-| ...
-| ... | IPFIX tests use 3-node topology TG - DUT1 - DUT2 - TG with
-| ... | one link between the nodes. DUT1 is configured with IPv4 and IPV6
-| ... | routing and static routes. IPFIX is configured on DUT1 with
-| ... | DUT1->TG interface as collector.Test packets are
-| ... | sent from TG to or through DUT1. TG listens for flow report packets
-| ... | and verifies that they contains flow records of test packets sent.
-
-*** Variables ***
-| ${dut1_to_tg_ip}= | 10::10
-| ${tg_to_dut1_ip}= | 12::10
-| ${prefix_length}= | 64
-| ${ip_version}= | ip6
-| ${sessions}= | 45
-
-# IPv4 addresses used for IPFIX exporter. Export over IPv6 not (yet?) supported.
-| ${dut1_to_tg_ip4}= | 192.168.1.1
-| ${tg_to_dut1_ip4}= | 192.168.1.2
-
-*** Test Cases ***
-| TC01: DUT reports packet flow with a large number of packets
-| | [Documentation]
-| | ... | [Top] TG-DUT1-DUT2-TG. [Cfg] On DUT1 configure IPFIX with TG interface
-| | ... | address as collector and add classify session with TG source address.
-| | ... | [Ver] Make TG send packets to DUT1, then listen for IPFIX template
-| | ... | and data packets, verify that IPFIX reported the received packets.
-| | ... | [Ref] RFC 7011
-| | Given Configure path in 3-node circular topology
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
-| | And Set interfaces in 3-node circular topology up
-| | And Set Interface Address | ${dut1_node}
-| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length}
-| | And Set Interface Address | ${dut1_node}
-| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip4} | ${24}
-| | And Add ARP on DUT | ${dut1_node} | ${dut1_to_tg} | ${tg_to_dut1_ip4}
-| | ... | ${tg_to_dut1_mac}
-| | And Add ARP on DUT | ${dut1_node} | ${dut1_to_tg} | ${tg_to_dut1_ip}
-| | ... | ${tg_to_dut1_mac}
-| | And VPP RA suppress link layer | ${dut1_node} | ${dut1_to_tg}
-| | ${table_index} | ${skip_n} | ${match_n}=
-| | ... | And VPP creates classify table L3 | ${dut1_node} | ${ip_version} | src
-| | And VPP configures classify session L3 | ${dut1_node} | permit
-| | ... | ${table_index} | ${skip_n} | ${match_n} | ${ip_version} | src
-| | ... | ${tg_to_dut1_ip}
-| | When Assign interface to flow table | ${dut1_node} | ${dut1_to_tg}
-| | ... | ${table_index} | ip_version=${ip_version}
-| | And setup IPFIX exporter | ${dut1_node} | ${tg_to_dut1_ip4}
-| | ... | ${dut1_to_tg_ip4} | interval=5
-| | And Set IPFIX stream | ${dut1_node} | ${1}
-| | And Assign classify table to exporter | ${dut1_node} | ${table_index}
-| | ... | ${ip_version}
-| | Then Send packets and verify IPFIX | ${tg_node} | ${dut1_node}
-| | ... | ${tg_to_dut1} | ${dut1_to_tg} | ${tg_to_dut1_ip} | ${dut1_to_tg_ip}
-| | ... | count=20000 | timeout=10
-
-| TC02: DUT reports packet flow when multiple sessions are configured
-| | [Documentation]
-| | ... | [Top] TG-DUT1-DUT2-TG. [Cfg] On DUT1 configure IPFIX with TG interface
-| | ... | address as collector and add several classify sessions with different
-| | ... | ports.
-| | ... | [Ver] Make TG send packets to DUT1 using a range of ports matching
-| | ... | configured sessions, then listen for IPFIX template and data packets,
-| | ... | verify that IPFIX reported the received packets for each session.
-| | ... | [Ref] RFC 7011
-| | Given Configure path in 3-node circular topology
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
-| | And Set interfaces in 3-node circular topology up
-| | And Set Interface Address | ${dut1_node}
-| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length}
-| | And Set Interface Address | ${dut1_node}
-| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip4} | ${24}
-| | And Add ARP on DUT | ${dut1_node} | ${dut1_to_tg} | ${tg_to_dut1_ip4}
-| | ... | ${tg_to_dut1_mac}
-| | And Add ARP on DUT | ${dut1_node} | ${dut1_to_tg} | ${tg_to_dut1_ip}
-| | ... | ${tg_to_dut1_mac}
-| | And VPP RA suppress link layer | ${dut1_node} | ${dut1_to_tg}
-| | ${table_index} | ${skip_n} | ${match_n}=
-| | ... | And VPP creates classify table L3 | ${dut1_node} | ${ip_version}
-| | ... | src proto l4 src_port dst_port
-| | :FOR | ${index} | IN RANGE | ${sessions}
-| | | VPP configures classify session generic | ${dut1_node}
-| | | ... | acl-hit-next permit | ${table_index} | ${skip_n} | ${match_n}
-| | | ... | l3 ${ip_version} src ${tg_to_dut1_ip}
-| | | ... | proto 6 l4 src_port ${index} dst_port ${index}
-| | When Assign interface to flow table | ${dut1_node} | ${dut1_to_tg}
-| | ... | ${table_index} | ip_version=${ip_version}
-| | And setup IPFIX exporter | ${dut1_node} | ${tg_to_dut1_ip4}
-| | ... | ${dut1_to_tg_ip4} | interval=5
-| | ... | mtu=1450 | interval=5
-| | And Set IPFIX stream | ${dut1_node} | ${1}
-| | And Assign classify table to exporter | ${dut1_node} | ${table_index}
-| | ... | ${ip_version}
-| | Then Send session sweep and verify IPFIX | ${tg_node} | ${dut1_node}
-| | ... | ${tg_to_dut1} | ${dut1_to_tg} | ${tg_to_dut1_ip} | ${dut1_to_tg_ip}
-| | ... | ${sessions} | timeout=10 | count=3
-
-# TODO: DUT reports packet flow when ACL is configured with wildcards
diff --git a/tests/func/telemetry/span/eth2p-ethip4-ip4base-spanrx-func.robot b/tests/func/telemetry/span/eth2p-ethip4-ip4base-spanrx-func.robot
deleted file mode 100644
index b7929493a5..0000000000
--- a/tests/func/telemetry/span/eth2p-ethip4-ip4base-spanrx-func.robot
+++ /dev/null
@@ -1,79 +0,0 @@
-# Copyright (c) 2016 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Resource | resources/libraries/robot/default.robot
-| Resource | resources/libraries/robot/testing_path.robot
-| Resource | resources/libraries/robot/telemetry/span.robot
-| Library  | resources.libraries.python.Trace
-| Library  | resources.libraries.python.IPv4Util
-| Library  | resources.libraries.python.IPv4Setup
-| Library  | resources.libraries.python.telemetry.SPAN
-| Force Tags | HW_ENV | VM_ENV | 3_NODE_DOUBLE_LINK_TOPO
-| Test Setup | Set up functional test
-| Test Teardown | Tear down functional test
-| Documentation | *SPAN test suite*
-| ... | *[Top] Network Topologies:* TG=DUT1 2-node topology with two
-| ... | links between nodes.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with SPAN mirroring from
-| ... | the first DUT1-TG interface to the second one.
-| ... | *[Ver] TG verification:* Test ARP or ICMP packets are sent by TG
-| ... | on first link to DUT1; On receipt through second link TG verifies
-| ... | the copy of packet sent and the copy of DUT's reply packet.
-| ... | *[Ref] Applicable standard specifications: None?*
-
-*** Variables ***
-| ${tg_to_dut_if1_ip4}= | 192.168.1.1
-| ${dut_to_tg_if1_ip4}= | 192.168.1.2
-| ${prefix}= | 24
-
-*** Test Cases ***
-| TC01: DUT mirrors L2 packets from one interface to another
-| | [Documentation]
-| | ... | [Top] TG=DUT1
-| | ... | [Cfg] On DUT1 configure IPv4 address and set SPAN mirroring\
-| | ... | from one DUT interface to the other.
-| | ... | [Ver] Make TG send an ARP packet to DUT through one interface,\
-| | ... | then receive a copy of sent packet and of DUT's ARP reply\
-| | ... | on the second interface.
-| | Given Configure path in 2-node circular topology | ${nodes['TG']} | ${nodes['DUT1']}
-| | ... | ${nodes['TG']}
-| | And Set interfaces in 2-node circular topology up
-| | And Set interface Address | ${dut_node} | ${dut_to_tg_if1}
-| | ... | ${dut_to_tg_if1_ip4} | ${prefix}
-| | And Set SPAN Mirroring | ${dut_node} | ${dut_to_tg_if1} | ${dut_to_tg_if2}
-| | Then Send Packet And Check Received Copies | ${tg_node}
-| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac}
-| | ... | ${dut_to_tg__if1_mac} | ${tg_to_dut_if2}
-| | ... | ${tg_to_dut_if1_ip4} | ${dut_to_tg_if1_ip4} | ARP
-
-| TC02: DUT mirrors IPv4 packets from one interface to another
-| | [Documentation]
-| | ... | [Top] TG=DUT1
-| | ... | [Cfg] On DUT1 configure IPv4 address, add ARP entry for one TG \
-| | ... | interface and set SPAN mirroring from one DUT interface to the other.
-| | ... | [Ver] Make TG send an ICMP packet to DUT through one interface,\
-| | ... | then receive a copy of sent packet and of DUT's ICMP reply\
-| | ... | on the other interface.
-| | Given Configure path in 2-node circular topology | ${nodes['TG']} | ${nodes['DUT1']}
-| | ... | ${nodes['TG']}
-| | And Set interfaces in 2-node circular topology up
-| | And Set interface Address | ${dut_node} | ${dut_to_tg_if1}
-| | ... | ${dut_to_tg_if1_ip4} | ${prefix}
-| | And Add ARP on DUT | ${dut_node} | ${dut_to_tg_if1} | ${tg_to_dut_if1_ip4}
-| | ... | ${tg_to_dut_if1_mac}
-| | And Set SPAN Mirroring | ${dut_node} | ${dut_to_tg_if1} | ${dut_to_tg_if2}
-| | Then Send Packet And Check Received Copies | ${tg_node}
-| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac}
-| | ... | ${dut_to_tg__if1_mac} | ${tg_to_dut_if2}
-| | ... | ${tg_to_dut_if1_ip4} | ${dut_to_tg_if1_ip4} | ICMP
diff --git a/tests/func/telemetry/span/eth2p-ethip6-ip6base-spanrx-func.robot b/tests/func/telemetry/span/eth2p-ethip6-ip6base-spanrx-func.robot
deleted file mode 100644
index 1d98bdf722..0000000000
--- a/tests/func/telemetry/span/eth2p-ethip6-ip6base-spanrx-func.robot
+++ /dev/null
@@ -1,64 +0,0 @@
-# Copyright (c) 2016 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Resource | resources/libraries/robot/default.robot
-| Resource | resources/libraries/robot/testing_path.robot
-| Resource | resources/libraries/robot/telemetry/span.robot
-| Library  | resources.libraries.python.Trace
-| Library  | resources.libraries.python.IPv6Util
-| Library  | resources.libraries.python.IPv6Setup
-| Library  | resources.libraries.python.Routing
-| Library  | resources.libraries.python.telemetry.SPAN
-| Force Tags | HW_ENV | VM_ENV | 3_NODE_DOUBLE_LINK_TOPO
-| Test Setup | Set up functional test
-| Test Teardown | Tear down functional test
-| Documentation | *SPAN test suite*
-| ... | *[Top] Network Topologies:* TG=DUT1 2-node topology with two
-| ... | links between nodes.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with SPAN mirroring from
-| ... | the first DUT1-TG interface to the second one.
-| ... | *[Ver] TG verification:* Test ARP or ICMP packets are sent by TG
-| ... | on first link to DUT1; On receipt through second link TG verifies
-| ... | the copy of packet sent and the copy of DUT's reply packet.
-| ... | *[Ref] Applicable standard specifications: None?*
-
-*** Variables ***
-| ${tg_to_dut_if1_ip6}= | 11::1
-| ${dut_to_tg_if1_ip6}= | 10::1
-| ${prefix}= | 24
-
-*** Test Cases ***
-| TC01: DUT mirrors IPv6 packets from one interface to another
-| | [Documentation]
-| | ... | [Top] TG=DUT1
-| | ... | [Cfg] On DUT1 configure IPv6 address, add ARP entry for one TG \
-| | ... | interface and set SPAN mirroring from one DUT interface to the other.
-| | ... | [Ver] Make TG send an ICMP packet to DUT through one interface,\
-| | ... | then receive a copy of sent packet and of DUT's ICMP reply\
-| | ... | on the other interface.
-| | Given Configure path in 2-node circular topology | ${nodes['TG']} | ${nodes['DUT1']}
-| | ... | ${nodes['TG']}
-| | And Set interfaces in 2-node circular topology up
-| | And Vpp Ra Suppress Link Layer | ${dut_node} | ${dut_to_tg_if1}
-| | And Vpp Set If Ipv6 Addr | ${dut_node} | ${dut_to_tg_if1}
-| | ... | ${dut_to_tg_if1_ip6} | ${prefix}
-| | And Add Ip Neighbor | ${dut_node} | ${dut_to_tg_if1} | ${tg_to_dut_if1_ip6}
-| | ... | ${tg_to_dut_if1_mac}
-| | And Vpp Route Add | ${dut_node} | ${tg_to_dut_if1_ip6} | ${prefix}
-| | ... | ${dut_to_tg_if1_ip6} | ${dut_to_tg_if1}
-| | And Set SPAN Mirroring | ${dut_node} | ${dut_to_tg_if1} | ${dut_to_tg_if2}
-| | Then Send Packet And Check Received Copies | ${tg_node}
-| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac}
-| | ... | ${dut_to_tg__if1_mac} | ${tg_to_dut_if2}
-| | ... | ${tg_to_dut_if1_ip6} | ${dut_to_tg_if1_ip6} | ICMPv6