diff options
author | 2017-06-20 13:57:08 +0200 | |
---|---|---|
committer | 2017-06-29 12:17:28 +0000 | |
commit | 6721e7f09aa95bff6622068332a3f56afad9c87b (patch) | |
tree | 37ef7f40e53f740a62830ab46142aa87342dc56b /tests/func/vlan/eth2p-dot1q--dot1ad-l2bdbasemaclrn-vlantrans12-func.robot | |
parent | 859157b5db45927c7b4bb0b2d575e68805777a86 (diff) |
CSIT-687: Directory structure reorganization
Change-Id: I772c9e214be2461adf58124998d272e7d795220f
Signed-off-by: Tibor Frank <tifrank@cisco.com>
Signed-off-by: Maciek Konstantynowicz <mkonstan@cisco.com>
Diffstat (limited to 'tests/func/vlan/eth2p-dot1q--dot1ad-l2bdbasemaclrn-vlantrans12-func.robot')
-rw-r--r-- | tests/func/vlan/eth2p-dot1q--dot1ad-l2bdbasemaclrn-vlantrans12-func.robot | 394 |
1 files changed, 0 insertions, 394 deletions
diff --git a/tests/func/vlan/eth2p-dot1q--dot1ad-l2bdbasemaclrn-vlantrans12-func.robot b/tests/func/vlan/eth2p-dot1q--dot1ad-l2bdbasemaclrn-vlantrans12-func.robot deleted file mode 100644 index b5fbb41138..0000000000 --- a/tests/func/vlan/eth2p-dot1q--dot1ad-l2bdbasemaclrn-vlantrans12-func.robot +++ /dev/null @@ -1,394 +0,0 @@ -# Copyright (c) 2016 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/default.robot -| Resource | resources/libraries/robot/bridge_domain.robot -| Resource | resources/libraries/robot/testing_path.robot -| Resource | resources/libraries/robot/tagging.robot -| Resource | resources/libraries/robot/l2_traffic.robot -| Library | resources.libraries.python.Trace -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | HW_ENV | VM_ENV | SKIP_VPP_PATCH -| Test Setup | Set up functional test -| Test Teardown | Tear down functional test -| Documentation | *L2BD with VLAN tag rewrite test cases - translate-1-2* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet encapsulations:* Eth-dot1q-IPv4-ICMPv4 or -| ... | Eth-dot1q-IPv6-ICMPv6 on TG-DUT1, Eth-dot1ad-IPv4-ICMPv4 or -| ... | Eth-dot1ad-IPv6-ICMPv6 on DUT1-DUT2, Eth-IPv4-ICMPv4 or Eth-IPv6-ICMPv6 -| ... | on TG-DUT2 for L2 switching of IPv4/IPv6. -| ... | *[Cfg] DUT configuration:* DUT1 is configured with bridge domain (L2BD) -| ... | switching combined with MAC learning enabled and added VLAN -| ... | sub-interface with VLAN tag rewrite translate-1-2 method of interface -| ... | towards TG and interface towards DUT2. DUT2 is configured with L2 -| ... | bridge domain (L2BD) switching between VLAN sub-interface with VLAN tag -| ... | rewrite pop-2 method of interface towards DUT1 and interface towards TG. -| ... | *[Ver] TG verification:* Test ICMPv4 Echo Request packets are -| ... | sent from TG on link to DUT1 and received in TG on link form DUT2; -| ... | on receive TG verifies packets for correctness and their IPv4 src-addr, -| ... | dst-addr and MAC addresses. -| ... | *[Ref] Applicable standard specifications:* IEEE 802.1q, IEEE 802.1ad. - -*** Variables *** -| ${bd_id1}= | 1 - -| ${subid}= | 10 - -| ${outer_vlan_id1}= | 110 -| ${outer_vlan_id2}= | 120 -| ${outer_vlan_wrong}= | 150 - -| ${inner_vlan_id1}= | 210 -| ${inner_vlan_id2}= | 220 -| ${inner_vlan_wrong}= | 250 - -| ${src_ip6}= | 3ffe:63::1 -| ${dst_ip6}= | 3ffe:63::2 - -*** Test Cases *** -| TC01: DUT1 and DUT2 with L2BD and VLAN translate-1-2 (DUT1) switch ICMPv4 between two TG links -| | [Documentation] -| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1q-IPv4-ICMPv4 on TG-DUT1, \ -| | ... | Eth-dot1ad-IPv4-ICMPv4 on DUT1-DUT2, Eth-IPv4-ICMPv4 on TG-DUT2. -| | ... | [Cfg] On DUT1 configure L2 bridge domain (L2BD) with one interface to -| | ... | DUT2 and one VLAN sub-interface towards TG with VLAN tag rewrite -| | ... | translate-1-2 method; on DUT2 configure L2 bridge domain (L2BD) with -| | ... | one interface to TG and one Dot1ad sub-interface towards DUT1 with -| | ... | VLAN tag rewrite pop-2 method. [Ver] Make TG send ICMPv4 Echo Req -| | ... | tagged with one Dot1q tag from one of its interfaces to another one -| | ... | via DUT1 and DUT2; verify that packet is received. -| | ... | [Ref] IEEE 802.1q, IEEE 802.1ad -| | Given Configure path in 3-node circular topology -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} -| | And Set interfaces in 3-node circular topology up -| | ${vlan1_name} | ${vlan1_index}= | When Create vlan sub-interface -| | ... | ${dut1_node} | ${dut1_to_tg} | ${outer_vlan_id1} -| | ${vlan2_name} | ${vlan2_index}= | And Create tagged sub-interface -| | ... | ${dut2_node} | ${dut2_to_dut1} | ${subid} -| | ... | outer_vlan_id=${outer_vlan_id2} | inner_vlan_id=${inner_vlan_id1} -| | ... | type_subif=two_tags dot1ad -| | And Configure L2 tag rewrite method on interface | ${dut1_node} -| | ... | ${vlan1_index} | translate-1-2 | push_dot1q=${False} -| | ... | tag1_id=${outer_vlan_id2} | tag2_id=${inner_vlan_id1} -| | And Configure L2 tag rewrite method on interface | ${dut2_node} -| | ... | ${vlan2_index} | pop-2 -| | And Create bridge domain | ${dut1_node} | ${bd_id1} -| | And Add interface to bridge domain | ${dut1_node} | ${dut1_to_dut2} -| | ... | ${bd_id1} -| | And Add interface to bridge domain | ${dut1_node} | ${vlan1_index} -| | ... | ${bd_id1} -| | And Create bridge domain | ${dut2_node} | ${bd_id1} -| | And Add interface to bridge domain | ${dut2_node} | ${dut2_to_tg} -| | ... | ${bd_id1} -| | And Add interface to bridge domain | ${dut2_node} | ${vlan2_index} -| | ... | ${bd_id1} -| | Then Send ICMP packet and verify received packet -| | ... | ${tg_node} | ${tg_to_dut1} | ${tg_to_dut2} | encaps=Dot1q -| | ... | vlan1=${outer_vlan_id1} - -| TC02: DUT1 and DUT2 with L2BD and VLAN translate-1-2 with wrong inner tag used (DUT1) switch ICMPv4 between two TG links -| | [Documentation] -| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1q-IPv4-ICMPv4 on TG-DUT1, \ -| | ... | Eth-dot1ad-IPv4-ICMPv4 on DUT1-DUT2, Eth-IPv4-ICMPv4 on TG-DUT2. -| | ... | [Cfg] On DUT1 configure L2 bridge domain (L2BD) with one interface to -| | ... | DUT2 and one VLAN sub-interface towards TG with VLAN tag rewrite -| | ... | translate-1-2 method to set inner tag different from inner tag set on -| | ... | Dot1ad sub-interface of DUT2; on DUT2 configure L2 bridge domain with -| | ... | one interface to TG and one Dot1ad sub-interface towards DUT1 with -| | ... | VLAN tag rewrite pop-2 method. [Ver] Make TG send ICMPv4 Echo Req -| | ... | tagged with one Dot1q tag from one of its interfaces to another one -| | ... | via DUT1 and DUT2; verify that packet is not received. -| | ... | [Ref] IEEE 802.1q, IEEE 802.1ad -| | [Tags] | SKIP_PATCH -| | Given Configure path in 3-node circular topology -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} -| | And Set interfaces in 3-node circular topology up -| | ${vlan1_name} | ${vlan1_index}= | When Create vlan sub-interface -| | ... | ${dut1_node} | ${dut1_to_tg} | ${outer_vlan_id1} -| | ${vlan2_name} | ${vlan2_index}= | And Create tagged sub-interface -| | ... | ${dut2_node} | ${dut2_to_dut1} | ${subid} -| | ... | outer_vlan_id=${outer_vlan_id2} | inner_vlan_id=${inner_vlan_id1} -| | ... | type_subif=two_tags dot1ad -| | And Configure L2 tag rewrite method on interface | ${dut1_node} -| | ... | ${vlan1_index} | translate-1-2 | push_dot1q=${False} -| | ... | tag1_id=${outer_vlan_id2} | tag2_id=${inner_vlan_wrong} -| | And Configure L2 tag rewrite method on interface | ${dut2_node} -| | ... | ${vlan2_index} | pop-2 -| | And Create bridge domain | ${dut1_node} | ${bd_id1} -| | And Add interface to bridge domain | ${dut1_node} | ${dut1_to_dut2} -| | ... | ${bd_id1} -| | And Add interface to bridge domain | ${dut1_node} | ${vlan1_index} -| | ... | ${bd_id1} -| | And Create bridge domain | ${dut2_node} | ${bd_id1} -| | And Add interface to bridge domain | ${dut2_node} | ${dut2_to_tg} -| | ... | ${bd_id1} -| | And Add interface to bridge domain | ${dut2_node} | ${vlan2_index} -| | ... | ${bd_id1} -| | Then Run Keyword And Expect Error | ICMP echo Rx timeout -| | ... | Send ICMP packet and verify received packet | ${tg_node} | ${tg_to_dut1} -| | ... | ${tg_to_dut2} | encaps=Dot1q | vlan1=${outer_vlan_id1} - -| TC03: DUT1 and DUT2 with L2BD and VLAN translate-1-2 with wrong outer tag used (DUT1) switch ICMPv4 between two TG links -| | [Documentation] -| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1q-IPv4-ICMPv4 on TG-DUT1, \ -| | ... | Eth-dot1ad-IPv4-ICMPv4 on DUT1-DUT2, Eth-IPv4-ICMPv4 on TG-DUT2. -| | ... | [Cfg] On DUT1 configure L2 bridge domain (L2BD) with one interface to -| | ... | DUT2 and one VLAN sub-interface towards TG with VLAN tag rewrite -| | ... | translate-1-2 method to set outer tag different from outer tag set on -| | ... | Dot1ad sub-interface of DUT2; on DUT2 configure L2 bridge domain with -| | ... | one interface to TG and one Dot1ad sub-interface towards DUT1 with -| | ... | VLAN tag rewrite pop-2 method. [Ver] Make TG send ICMPv4 Echo Req -| | ... | tagged with one Dot1q tag from one of its interfaces to another one -| | ... | via DUT1 and DUT2; verify that packet is not received. -| | ... | [Ref] IEEE 802.1q, IEEE 802.1ad -| | [Tags] | SKIP_PATCH -| | Given Configure path in 3-node circular topology -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} -| | And Set interfaces in 3-node circular topology up -| | ${vlan1_name} | ${vlan1_index}= | When Create vlan sub-interface -| | ... | ${dut1_node} | ${dut1_to_tg} | ${outer_vlan_id1} -| | ${vlan2_name} | ${vlan2_index}= | And Create tagged sub-interface -| | ... | ${dut2_node} | ${dut2_to_dut1} | ${subid} -| | ... | outer_vlan_id=${outer_vlan_id2} | inner_vlan_id=${inner_vlan_id1} -| | ... | type_subif=two_tags dot1ad -| | And Configure L2 tag rewrite method on interface | ${dut1_node} -| | ... | ${vlan1_index} | translate-1-2 | push_dot1q=${False} -| | ... | tag1_id=${outer_vlan_wrong} | tag2_id=${inner_vlan_id1} -| | And Configure L2 tag rewrite method on interface | ${dut2_node} -| | ... | ${vlan2_index} | pop-2 -| | And Create bridge domain | ${dut1_node} | ${bd_id1} -| | And Add interface to bridge domain | ${dut1_node} | ${dut1_to_dut2} -| | ... | ${bd_id1} -| | And Add interface to bridge domain | ${dut1_node} | ${vlan1_index} -| | ... | ${bd_id1} -| | And Create bridge domain | ${dut2_node} | ${bd_id1} -| | And Add interface to bridge domain | ${dut2_node} | ${dut2_to_tg} -| | ... | ${bd_id1} -| | And Add interface to bridge domain | ${dut2_node} | ${vlan2_index} -| | ... | ${bd_id1} -| | Then Run Keyword And Expect Error | ICMP echo Rx timeout -| | ... | Send ICMP packet and verify received packet | ${tg_node} | ${tg_to_dut1} -| | ... | ${tg_to_dut2} | encaps=Dot1q | vlan1=${outer_vlan_id1} - -| TC04: DUT1 and DUT2 with L2BD and VLAN translate-1-2 with wrong outer and inner tag used (DUT1) switch ICMPv4 between two TG links -| | [Documentation] -| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1q-IPv4-ICMPv4 on TG-DUT1, \ -| | ... | Eth-dot1ad-IPv4-ICMPv4 on DUT1-DUT2, Eth-IPv4-ICMPv4 on TG-DUT2. -| | ... | [Cfg] On DUT1 configure L2 bridge domain (L2BD) with one interface to -| | ... | DUT2 and one VLAN sub-interface towards TG with VLAN tag rewrite -| | ... | translate-1-2 method to set outer and inner tags different from tags -| | ... | set on Dot1ad sub-interface of DUT2; on DUT2 configure L2 -| | ... | bridge domain with one interface to TG and one Dot1ad sub-interface -| | ... | towards DUT1 with VLAN tag rewrite pop-2 method. [Ver] Make TG send -| | ... | ICMPv4 Echo Req tagged with one Dot1q tag from one of its interfaces -| | ... | to another one via DUT1 and DUT2; verify that packet is not received. -| | ... | [Ref] IEEE 802.1q, IEEE 802.1ad -| | [Tags] | SKIP_PATCH -| | Given Configure path in 3-node circular topology -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} -| | And Set interfaces in 3-node circular topology up -| | ${vlan1_name} | ${vlan1_index}= | When Create vlan sub-interface -| | ... | ${dut1_node} | ${dut1_to_tg} | ${outer_vlan_id1} -| | ${vlan2_name} | ${vlan2_index}= | And Create tagged sub-interface -| | ... | ${dut2_node} | ${dut2_to_dut1} | ${subid} -| | ... | outer_vlan_id=${outer_vlan_id2} | inner_vlan_id=${inner_vlan_id1} -| | ... | type_subif=two_tags dot1ad -| | And Configure L2 tag rewrite method on interface | ${dut1_node} -| | ... | ${vlan1_index} | translate-1-2 | push_dot1q=${False} -| | ... | tag1_id=${outer_vlan_wrong} | tag2_id=${inner_vlan_wrong} -| | And Configure L2 tag rewrite method on interface | ${dut2_node} -| | ... | ${vlan2_index} | pop-2 -| | And Create bridge domain | ${dut1_node} | ${bd_id1} -| | And Add interface to bridge domain | ${dut1_node} | ${dut1_to_dut2} -| | ... | ${bd_id1} -| | And Add interface to bridge domain | ${dut1_node} | ${vlan1_index} -| | ... | ${bd_id1} -| | And Create bridge domain | ${dut2_node} | ${bd_id1} -| | And Add interface to bridge domain | ${dut2_node} | ${dut2_to_tg} -| | ... | ${bd_id1} -| | And Add interface to bridge domain | ${dut2_node} | ${vlan2_index} -| | ... | ${bd_id1} -| | Then Run Keyword And Expect Error | ICMP echo Rx timeout -| | ... | Send ICMP packet and verify received packet | ${tg_node} | ${tg_to_dut1} -| | ... | ${tg_to_dut2} | encaps=Dot1q | vlan1=${outer_vlan_id1} - -| TC05: DUT1 and DUT2 with L2BD and VLAN translate-1-2 (DUT1) switch ICMPv6 between two TG links -| | [Documentation] -| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1q-IPv6-ICMPv6 on TG-DUT1, \ -| | ... | Eth-dot1ad-IPv6-ICMPv6 on DUT1-DUT2, Eth-IPv6-ICMPv6 on TG-DUT2. -| | ... | [Cfg] On DUT1 configure L2 bridge domain (L2BD) with one interface to -| | ... | DUT2 and one VLAN sub-interface towards TG with VLAN tag rewrite -| | ... | translate-1-2 method; on DUT2 configure L2 bridge domain (L2BD) with -| | ... | one interface to TG and one Dot1ad sub-interface towards DUT1 with -| | ... | VLAN tag rewrite pop-2 method. [Ver] Make TG send ICMPv6 Echo Req -| | ... | tagged with one Dot1q tag from one of its interfaces to another one -| | ... | via DUT1 and DUT2; verify that packet is received. -| | ... | [Ref] IEEE 802.1q, IEEE 802.1ad -| | Given Configure path in 3-node circular topology -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} -| | And Set interfaces in 3-node circular topology up -| | ${vlan1_name} | ${vlan1_index}= | When Create vlan sub-interface -| | ... | ${dut1_node} | ${dut1_to_tg} | ${outer_vlan_id1} -| | ${vlan2_name} | ${vlan2_index}= | And Create tagged sub-interface -| | ... | ${dut2_node} | ${dut2_to_dut1} | ${subid} -| | ... | outer_vlan_id=${outer_vlan_id2} | inner_vlan_id=${inner_vlan_id2} -| | ... | type_subif=two_tags dot1ad -| | And Configure L2 tag rewrite method on interface | ${dut1_node} -| | ... | ${vlan1_index} | translate-1-2 | push_dot1q=${False} -| | ... | tag1_id=${outer_vlan_id2} | tag2_id=${inner_vlan_id2} -| | And Configure L2 tag rewrite method on interface | ${dut2_node} -| | ... | ${vlan2_index} | pop-2 -| | And Create bridge domain | ${dut1_node} | ${bd_id1} -| | And Add interface to bridge domain | ${dut1_node} | ${dut1_to_dut2} -| | ... | ${bd_id1} -| | And Add interface to bridge domain | ${dut1_node} | ${vlan1_index} -| | ... | ${bd_id1} -| | And Create bridge domain | ${dut2_node} | ${bd_id1} -| | And Add interface to bridge domain | ${dut2_node} | ${dut2_to_tg} -| | ... | ${bd_id1} -| | And Add interface to bridge domain | ${dut2_node} | ${vlan2_index} -| | ... | ${bd_id1} -| | Then Send ICMP packet and verify received packet -| | ... | ${tg_node} | ${tg_to_dut1} | ${tg_to_dut2} | src_ip=${src_ip6} -| | ... | dst_ip=${dst_ip6} | encaps=Dot1q | vlan1=${outer_vlan_id1} - -| TC06: DUT1 and DUT2 with L2BD and VLAN translate-1-2 with wrong inner tag used (DUT1) switch ICMPv6 between two TG links -| | [Documentation] -| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1q-IPv6-ICMPv6 on TG-DUT1, \ -| | ... | Eth-dot1ad-IPv6-ICMPv6 on DUT1-DUT2, Eth-IPv6-ICMPv6 on TG-DUT2. -| | ... | [Cfg] On DUT1 configure L2 bridge domain (L2BD) with one interface to -| | ... | DUT2 and one VLAN sub-interface towards TG with VLAN tag rewrite -| | ... | translate-1-2 method to set inner tag different from inner tag set on -| | ... | Dot1ad sub-interface of DUT2; on DUT2 configure L2 bridge domain with -| | ... | one interface to TG and one Dot1ad sub-interface towards DUT1 with -| | ... | VLAN tag rewrite pop-2 method. [Ver] Make TG send ICMPv6 Echo Req -| | ... | tagged with one Dot1q tag from one of its interfaces to another one -| | ... | via DUT1 and DUT2; verify that packet is not received. -| | ... | [Ref] IEEE 802.1q, IEEE 802.1ad -| | [Tags] | SKIP_PATCH -| | Given Configure path in 3-node circular topology -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} -| | And Set interfaces in 3-node circular topology up -| | ${vlan1_name} | ${vlan1_index}= | When Create vlan sub-interface -| | ... | ${dut1_node} | ${dut1_to_tg} | ${outer_vlan_id1} -| | ${vlan2_name} | ${vlan2_index}= | And Create tagged sub-interface -| | ... | ${dut2_node} | ${dut2_to_dut1} | ${subid} -| | ... | outer_vlan_id=${outer_vlan_id2} | inner_vlan_id=${inner_vlan_id2} -| | ... | type_subif=two_tags dot1ad -| | And Configure L2 tag rewrite method on interface | ${dut1_node} -| | ... | ${vlan1_index} | translate-1-2 | push_dot1q=${False} -| | ... | tag1_id=${outer_vlan_id2} | tag2_id=${inner_vlan_wrong} -| | And Configure L2 tag rewrite method on interface | ${dut2_node} -| | ... | ${vlan2_index} | pop-2 -| | And Create bridge domain | ${dut1_node} | ${bd_id1} -| | And Add interface to bridge domain | ${dut1_node} | ${dut1_to_dut2} -| | ... | ${bd_id1} -| | And Add interface to bridge domain | ${dut1_node} | ${vlan1_index} -| | ... | ${bd_id1} -| | And Create bridge domain | ${dut2_node} | ${bd_id1} -| | And Add interface to bridge domain | ${dut2_node} | ${dut2_to_tg} -| | ... | ${bd_id1} -| | And Add interface to bridge domain | ${dut2_node} | ${vlan2_index} -| | ... | ${bd_id1} -| | Then Run Keyword And Expect Error | ICMP echo Rx timeout -| | ... | Send ICMP packet and verify received packet | ${tg_node} | ${tg_to_dut1} -| | ... | ${tg_to_dut2} | src_ip=${src_ip6} | dst_ip=${dst_ip6} | encaps=Dot1q -| | ... | vlan1=${outer_vlan_id1} - -| TC07: DUT1 and DUT2 with L2BD and VLAN translate-1-2 with wrong outer tag used (DUT1) switch ICMPv6 between two TG links -| | [Documentation] -| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1q-IPv6-ICMPv6 on TG-DUT1, \ -| | ... | Eth-dot1ad-IPv6-ICMPv6 on DUT1-DUT2, Eth-IPv6-ICMPv6 on TG-DUT2. -| | ... | [Cfg] On DUT1 configure L2 bridge domain (L2BD) with one interface to -| | ... | DUT2 and one VLAN sub-interface towards TG with VLAN tag rewrite -| | ... | translate-1-2 method to set outer tag different from outer tag set on -| | ... | Dot1ad sub-interface of DUT2; on DUT2 configure L2 bridge domain with -| | ... | one interface to TG and one Dot1ad sub-interface towards DUT1 with -| | ... | VLAN tag rewrite pop-2 method. [Ver] Make TG send ICMPv6 Echo Req -| | ... | tagged with one Dot1q tag from one of its interfaces to another one -| | ... | via DUT1 and DUT2; verify that packet is not received. -| | ... | [Ref] IEEE 802.1q, IEEE 802.1ad -| | [Tags] | SKIP_PATCH -| | Given Configure path in 3-node circular topology -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} -| | And Set interfaces in 3-node circular topology up -| | ${vlan1_name} | ${vlan1_index}= | When Create vlan sub-interface -| | ... | ${dut1_node} | ${dut1_to_tg} | ${outer_vlan_id1} -| | ${vlan2_name} | ${vlan2_index}= | And Create tagged sub-interface -| | ... | ${dut2_node} | ${dut2_to_dut1} | ${subid} -| | ... | outer_vlan_id=${outer_vlan_id2} | inner_vlan_id=${inner_vlan_id2} -| | ... | type_subif=two_tags dot1ad -| | And Configure L2 tag rewrite method on interface | ${dut1_node} -| | ... | ${vlan1_index} | translate-1-2 | push_dot1q=${False} -| | ... | tag1_id=${outer_vlan_wrong} | tag2_id=${inner_vlan_id2} -| | And Configure L2 tag rewrite method on interface | ${dut2_node} -| | ... | ${vlan2_index} | pop-2 -| | And Create bridge domain | ${dut1_node} | ${bd_id1} -| | And Add interface to bridge domain | ${dut1_node} | ${dut1_to_dut2} -| | ... | ${bd_id1} -| | And Add interface to bridge domain | ${dut1_node} | ${vlan1_index} -| | ... | ${bd_id1} -| | And Create bridge domain | ${dut2_node} | ${bd_id1} -| | And Add interface to bridge domain | ${dut2_node} | ${dut2_to_tg} -| | ... | ${bd_id1} -| | And Add interface to bridge domain | ${dut2_node} | ${vlan2_index} -| | ... | ${bd_id1} -| | Then Run Keyword And Expect Error | ICMP echo Rx timeout -| | ... | Send ICMP packet and verify received packet | ${tg_node} | ${tg_to_dut1} -| | ... | ${tg_to_dut2} | src_ip=${src_ip6} | dst_ip=${dst_ip6} | encaps=Dot1q -| | ... | vlan1=${outer_vlan_id1} - -| TC08: DUT1 and DUT2 with L2BD and VLAN translate-1-2 with wrong outer and inner tag used (DUT1) switch ICMPv6 between two TG links -| | [Documentation] -| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-dot1q-IPv6-ICMPv6 on TG-DUT1, \ -| | ... | Eth-dot1ad-IPv6-ICMPv6 on DUT1-DUT2, Eth-IPv6-ICMPv6 on TG-DUT2. -| | ... | [Cfg] On DUT1 configure L2 bridge domain (L2BD) with one interface to -| | ... | DUT2 and one VLAN sub-interface towards TG with VLAN tag rewrite -| | ... | translate-1-2 method to set outer and inner tags different from tags -| | ... | set on Dot1ad sub-interface of DUT2; on DUT2 configure L2 -| | ... | bridge domain with one interface to TG and one Dot1ad sub-interface -| | ... | towards DUT1 with VLAN tag rewrite pop-2 method. [Ver] Make TG send -| | ... | ICMPv6 Echo Req tagged with one Dot1q tag from one of its interfaces -| | ... | to another one via DUT1 and DUT2; verify that packet is not received. -| | ... | [Ref] IEEE 802.1q, IEEE 802.1ad -| | [Tags] | SKIP_PATCH -| | Given Configure path in 3-node circular topology -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} -| | And Set interfaces in 3-node circular topology up -| | ${vlan1_name} | ${vlan1_index}= | When Create vlan sub-interface -| | ... | ${dut1_node} | ${dut1_to_tg} | ${outer_vlan_id1} -| | ${vlan2_name} | ${vlan2_index}= | And Create tagged sub-interface -| | ... | ${dut2_node} | ${dut2_to_dut1} | ${subid} -| | ... | outer_vlan_id=${outer_vlan_id2} | inner_vlan_id=${inner_vlan_id2} -| | ... | type_subif=two_tags dot1ad -| | And Configure L2 tag rewrite method on interface | ${dut1_node} -| | ... | ${vlan1_index} | translate-1-2 | push_dot1q=${False} -| | ... | tag1_id=${outer_vlan_wrong} | tag2_id=${inner_vlan_wrong} -| | And Configure L2 tag rewrite method on interface | ${dut2_node} -| | ... | ${vlan2_index} | pop-2 -| | And Create bridge domain | ${dut1_node} | ${bd_id1} -| | And Add interface to bridge domain | ${dut1_node} | ${dut1_to_dut2} -| | ... | ${bd_id1} -| | And Add interface to bridge domain | ${dut1_node} | ${vlan1_index} -| | ... | ${bd_id1} -| | And Create bridge domain | ${dut2_node} | ${bd_id1} -| | And Add interface to bridge domain | ${dut2_node} | ${dut2_to_tg} -| | ... | ${bd_id1} -| | And Add interface to bridge domain | ${dut2_node} | ${vlan2_index} -| | ... | ${bd_id1} -| | Then Run Keyword And Expect Error | ICMP echo Rx timeout -| | ... | Send ICMP packet and verify received packet | ${tg_node} | ${tg_to_dut1} -| | ... | ${tg_to_dut2} | src_ip=${src_ip6} | dst_ip=${dst_ip6} | encaps=Dot1q -| | ... | vlan1=${outer_vlan_id1} |