CSIT-687: Directory structure reorganization

Change-Id: I772c9e214be2461adf58124998d272e7d795220f
Signed-off-by: Tibor Frank <tifrank@cisco.com>
Signed-off-by: Maciek Konstantynowicz <mkonstan@cisco.com>

1 files changed, 0 insertions, 145 deletions

diff --git a/tests/func/vlan/eth2p-dot1q-l2bdbasemaclrn-eth-2vhost-1vm-func.robot b/tests/func/vlan/eth2p-dot1q-l2bdbasemaclrn-eth-2vhost-1vm-func.robot
deleted file mode 100644
index 28ab67b266..0000000000
--- a/tests/func/vlan/eth2p-dot1q-l2bdbasemaclrn-eth-2vhost-1vm-func.robot
+++ /dev/null
@@ -1,145 +0,0 @@
-# Copyright (c) 2016 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Resource | resources/libraries/robot/default.robot
-| Resource | resources/libraries/robot/bridge_domain.robot
-| Resource | resources/libraries/robot/testing_path.robot
-| Resource | resources/libraries/robot/tagging.robot
-| Resource | resources/libraries/robot/l2_traffic.robot
-| Resource | resources/libraries/robot/qemu.robot
-| Resource | resources/libraries/robot/double_qemu_setup.robot
-| Library  | resources.libraries.python.Trace
-| Force Tags | 3_NODE_DOUBLE_LINK_TOPO | HW_ENV | VM_ENV | VPP_VM_ENV
-| Test Setup | Set up functional test
-| Test Teardown | Run Keywords | Show Packet Trace on All DUTs | ${nodes}
-| ...           | AND | Show vpp trace dump on all DUTs
-| ...           | AND | Stop and clear QEMU | ${dut_node} | ${vm_node}
-| ...           | AND | Verify VPP PID in Teardown
-| Documentation | *L2 bridge domain with VLAN tag over VM test cases*
-| ...
-| ... | *[Top] Network Topologies:* TG=DUT 2-node circular topology
-| ... | with double links between nodes.
-| ... | *[Enc] Packet encapsulations:* Eth-dot1q-IPv4-ICMPv4 or
-| ... | Eth-dot1q-IPv6-ICMPv6 on TG=DUT and on DUT=VM.
-| ... | *[Cfg] DUT configuration:* DUT is configured with two bridge domains
-| ... | (L2BD) with MAC learning enabled; each one with added VLAN
-| ... | sub-interface towards TG and vhost-user interface to local VM. Configure
-| ... | linux bridge on VM to pass traffic between both vhost-user interfaces.
-| ... | *[Ver] TG verification:* Make TG send ICMPv4/ICMPv6 Echo Req between two
-| ... | of its interfaces to be switched by DUT via VM; verify packets are
-| ... | switched between these TG interfaces; on receive TG verifies packets for
-| ... | correctness and their IPv4 src-addr, dst-addr, MAC addresses and
-| ... | VLAN tag.
-| ... | *[Ref] Applicable standard specifications:* IEEE 802.1q.
-
-*** Variables ***
-| ${bd_id1}= | 1
-| ${bd_id2}= | 2
-
-| ${vlan_id1}= | 110
-| ${vlan_wrong}= | 150
-
-| ${sock1}= | /tmp/sock1
-| ${sock2}= | /tmp/sock2
-
-| ${ip4_1}= | 192.168.100.1
-| ${ip4_2}= | 192.168.100.2
-
-| ${ip6_1}= | 3ffe:63::1
-| ${ip6_2}= | 3ffe:63::2
-
-*** Test Cases ***
-| TC01: eth2p-dot1q-l2bdbasemaclrn-eth-2vhost-1vm - ipv4
-| | [Documentation]
-| | ... | [Top] TG=DUT.
-| | ... | [Enc] Eth-dot1q-IPv4-ICMPv4 on TG=DUT and on DUT=VM.
-| | ... | [Cfg] On DUT configure two L2BDs (MAC learning enabled); first L2BD
-| | ... | with Dot1Q tagged interface to TG-if1 and vhost-user interface to
-| | ... | local VM, second one with vhost-user interface to local VM and Dot1Q
-| | ... | tagged interface towards TG-if2. Configure linux bridge on VM to pass
-| | ... | traffic between both vhost-user interfaces.
-| | ... | [Ver] Make TG send ICMPv4 Echo Req tagged with one Dot1q tag
-| | ... | from one of its interfaces to another one via DUT and VM; verify
-| | ... | that packet is received.
-| | ... | [Ref] IEEE 802.1q
-| | ...
-| | Given Configure path in 2-node circular topology
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']}
-| | And Set interfaces in 2-node circular topology up
-| | ${vlan1_name} | ${vlan1_index}= | When Create vlan sub-interface
-| | ... | ${dut_node} | ${dut_to_tg_if1} | ${vlan_id1}
-| | ${vlan2_name} | ${vlan2_index}= | And Create vlan sub-interface
-| | ... | ${dut_node} | ${dut_to_tg_if2} | ${vlan_id1}
-| | And Configure vhost interfaces for L2BD forwarding
-| | ... | ${dut_node} | ${sock1} | ${sock2}
-| | And Configure VM for vhost L2BD forwarding
-| | ... | ${dut_node} | ${sock1} | ${sock2}
-| | And Add interface to bridge domain | ${dut_node} | ${vlan1_index}
-| | ...                                     | ${bd_id1}
-| | And Add interface to bridge domain | ${dut_node} | ${vhost_if1}
-| | ...                                     | ${bd_id1}
-| | And Add interface to bridge domain | ${dut_node} | ${vlan2_index}
-| | ...                                     | ${bd_id2}
-| | And Add interface to bridge domain | ${dut_node} | ${vhost_if2}
-| | ...                                     | ${bd_id2}
-| | Then Send ICMP packet and verify received packet
-| | ... | ${tg_node} | ${tg_to_dut_if1} | ${tg_to_dut_if2} | ${ip4_1} | ${ip4_2}
-| | ... | encaps=Dot1q | vlan1=${vlan_id1} | encaps_rx=Dot1q
-| | And Send ICMP packet and verify received packet
-| | ... | ${tg_node} | ${tg_to_dut_if2} | ${tg_to_dut_if1} | ${ip4_2} | ${ip4_1}
-| | ... | encaps=Dot1q | vlan1=${vlan_id1} | encaps_rx=Dot1q
-
-| TC01: eth2p-dot1q-l2bdbasemaclrn-eth-2vhost-1vm - ipv6
-| | [Documentation]
-| | ... | [Top] TG=DUT.
-| | ... | [Enc] Eth-dot1q-IPv6-ICMPv6 on TG=DUT and on DUT=VM.
-| | ... | [Cfg] On DUT configure two L2BDs (MAC learning enabled); first L2BD
-| | ... | with Dot1Q tagged interface to TG-if1 and vhost-user interface to
-| | ... | local VM, second one with vhost-user interface to local VM and Dot1Q
-| | ... | tagged interface towards TG-if2. Configure linux bridge on VM to pass
-| | ... | traffic between both vhost-user interfaces.
-| | ... | [Ver] Make TG send ICMPv6 Echo Req tagged with one Dot1q tag
-| | ... | from one of its interfaces to another one via DUT and VM; verify
-| | ... | that packet is received.
-| | ... | [Ref] IEEE 802.1q
-| | ...
-| | Given Configure path in 2-node circular topology
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']}
-| | And Set interfaces in 2-node circular topology up
-| | ${vlan1_name} | ${vlan1_index}= | When Create vlan sub-interface
-| | ... | ${dut_node} | ${dut_to_tg_if1} | ${vlan_id1}
-| | ${vlan2_name} | ${vlan2_index}= | And Create vlan sub-interface
-| | ... | ${dut_node} | ${dut_to_tg_if2} | ${vlan_id1}
-| | And Configure vhost interfaces for L2BD forwarding
-| | ... | ${dut_node} | ${sock1} | ${sock2}
-| | And Configure VM for vhost L2BD forwarding
-| | ... | ${dut_node} | ${sock1} | ${sock2}
-| | And Add interface to bridge domain | ${dut_node} | ${vlan1_index}
-| | ...                                     | ${bd_id1}
-| | And Add interface to bridge domain | ${dut_node} | ${vhost_if1}
-| | ...                                     | ${bd_id1}
-| | And Add interface to bridge domain | ${dut_node} | ${vlan2_index}
-| | ...                                     | ${bd_id2}
-| | And Add interface to bridge domain | ${dut_node} | ${vhost_if2}
-| | ...                                     | ${bd_id2}
-| | Then Send ICMP packet and verify received packet
-| | ... | ${tg_node} | ${tg_to_dut_if1} | ${tg_to_dut_if2} | ${ip6_1} | ${ip6_2}
-| | ... | encaps=Dot1q | vlan1=${vlan_id1} | encaps_rx=Dot1q
-| | And Send ICMP packet and verify received packet
-| | ... | ${tg_node} | ${tg_to_dut_if2} | ${tg_to_dut_if1} | ${ip6_2} | ${ip6_1}
-| | ... | encaps=Dot1q | vlan1=${vlan_id1} | encaps_rx=Dot1q
-
-
-
-