csit-func-tc-naming-change - phase 1

- change of ts directories
- change of ts file names
- splitting of former files to more files when suitable
- more details:
  https://wiki.fd.io/view/CSIT/csit-perf-tc-naming-change

Change-Id: Ifda1038f8323735f86c1be7ba7f93e3fda183618
Signed-off-by: Jan Gelety <jgelety@cisco.com>

1 files changed, 120 insertions, 0 deletions

diff --git a/tests/func/vxlan/eth2p-ethip6vxlan-l2bdbasemaclrn-eth-2vhost-1vm-func.robot b/tests/func/vxlan/eth2p-ethip6vxlan-l2bdbasemaclrn-eth-2vhost-1vm-func.robot
new file mode 100644
index 0000000000..19846294a3
--- /dev/null
+++ b/tests/func/vxlan/eth2p-ethip6vxlan-l2bdbasemaclrn-eth-2vhost-1vm-func.robot
@@ -0,0 +1,120 @@
+# Copyright (c) 2016 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/default.robot
+| Resource | resources/libraries/robot/testing_path.robot
+| Resource | resources/libraries/robot/vxlan.robot
+| Resource | resources/libraries/robot/l2_traffic.robot
+| Resource | resources/libraries/robot/qemu.robot
+| Resource | resources/libraries/robot/double_qemu_setup.robot
+| Library  | resources.libraries.python.Trace
+| Force Tags | 3_NODE_SINGLE_LINK_TOPO | VM_ENV | HW_ENV
+| Test Setup | Func Test Setup
+| Test Teardown | Func Test Teardown
+| Documentation | *L2BD with VM combined with VXLAN test cases - IPv6*
+| ...
+| ... | *[Top] Network topologies:* TG-DUT1-DUT2-TG 3-node circular topology
+| ... | with single links between nodes.
+| ... | *[Enc] Packet encapsulations:* Eth-IPv6-VXLAN-Eth-IPv6-ICMPv6 on
+| ... | DUT1-DUT2, Eth-IPv6-ICMPv6 on TG-DUTn for L2 switching of IPv6.
+| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2
+| ... | bridge-domain (L2BD) switching combined with MAC learning enabled;
+| ... | VXLAN tunnels are configured between L2BDs on DUT1 and DUT2.
+| ... | *[Ver] TG verification:* Test ICMPv6 Echo Request packets are sent
+| ... | in both directions by TG on links to DUT1 and DUT2; on receive TG
+| ... | verifies packets for correctness and their IPv6 src-addr, dst-addr
+| ... | and MAC addresses.
+| ... | *[Ref] Applicable standard specifications:* RFC7348.
+
+*** Variables ***
+| ${vni_1}= | 23
+
+| ${bd_id1}= | 10
+| ${bd_id2}= | 20
+
+| ${ip6_addr1}= | 3ffe:64::1
+| ${ip6_addr2}= | 3ffe:64::2
+| ${ip6_prefix}= | 64
+
+| ${sock1}= | /tmp/sock1
+| ${sock2}= | /tmp/sock2
+
+| ${qemu1}= | qemu_instance_1
+| ${qemu2}= | qemu_instance_2
+
+| ${dut1_vhost1}= | dut1_vhost_if1
+| ${dut1_vhost2}= | dut1_vhost_if2
+| ${dut2_vhost1}= | dut2_vhost_if1
+| ${dut2_vhost2}= | dut2_vhost_if2
+
+*** Test Cases ***
+| TC01:DUT1 and DUT2 with two L2BDs and VXLANoIPv6 tunnel switch ICMPv6 between TG links and VM links
+| | [Documentation]
+| | ... | [Top] TG-DUT1-VM-DUT1-DUT2-VM-DUT2-TG.
+| | ... | [Enc] Eth-IPv6-VXLAN-Eth-IPv6-ICMPv6 on DUT1-DUT2; Eth-IPv4-ICMPv4
+| | ... | on TG-DUTn and DUTn=VM.
+| | ... | [Cfg] On both DUTs configure two L2BDs (MAC learning enabled); first
+| | ... | L2BD with untagged interface to TG and vhost-user interface to local
+| | ... | VM, second one with vhost-user interface to local VM and VXLAN
+| | ... | interface towards the other DUT. Configure linux bridge on both VMs
+| | ... | to pass traffic between both vhost-user interfaces.
+| | ... | [Ver] Make TG send ICMPv6 Echo Req between two of its interfaces to
+| | ... | be switched by DUT1 and DUT2; verify packets are switched between
+| | ... | these TG interfaces.
+| | ... | [Ref] RFC7348.
+| | [Tags] | VPP_VM_ENV
+| | Given Path for 3-node testing is set
+| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
+| | And Interfaces in 3-node path are up
+| | When VPP Vhost interfaces for L2BD forwarding are setup | ${dut1_node}
+| | ...                                                     | ${sock1}
+| | ...                                                     | ${sock2}
+| | ...                                                     | ${dut1_vhost1}
+| | ...                                                     | ${dut1_vhost2}
+| | And VPP Vhost interfaces for L2BD forwarding are setup | ${dut2_node}
+| | ...                                                    | ${sock1}
+| | ...                                                    | ${sock2}
+| | ...                                                    | ${dut2_vhost1}
+| | ...                                                    | ${dut2_vhost2}
+| | And VM for Vhost L2BD forwarding is setup | ${dut1_node} | ${sock1}
+| | ...                                       | ${sock2} | ${qemu1}
+| | And VM for Vhost L2BD forwarding is setup | ${dut2_node} | ${sock1}
+| | ...                                       | ${sock2} | ${qemu2}
+| | And Set Interface Address | ${dut1_node} | ${dut1_to_dut2} | ${ip6_addr1}
+| | ...                       | ${ip6_prefix}
+| | And Set Interface Address | ${dut2_node} | ${dut2_to_dut1} | ${ip6_addr2}
+| | ...                       | ${ip6_prefix}
+| | And VPP IP Probe | ${dut1_node} | ${dut1_to_dut2} | ${ip6_addr2}
+| | And VPP IP Probe | ${dut2_node} | ${dut2_to_dut1} | ${ip6_addr1}
+| | ${dut1s_vxlan}= | And Create VXLAN interface | ${dut1_node} | ${vni_1}
+| |                 | ...                        | ${ip6_addr1} | ${ip6_addr2}
+| | ${dut2s_vxlan}= | And Create VXLAN interface | ${dut2_node} | ${vni_1}
+| |                 | ...                        | ${ip6_addr2} | ${ip6_addr1}
+| | And Interfaces are added to BD | ${dut1_node} | ${bd_id1}
+| | ...                            | ${dut1_to_tg} | ${${dut1_vhost1}}
+| | And Interfaces are added to BD | ${dut1_node} | ${bd_id2}
+| | ...                            | ${dut1s_vxlan} | ${${dut1_vhost2}}
+| | And Interfaces are added to BD | ${dut2_node} | ${bd_id1}
+| | ...                            | ${dut2_to_tg} | ${${dut2_vhost1}}
+| | And Interfaces are added to BD | ${dut2_node} | ${bd_id2}
+| | ...                            | ${dut2s_vxlan} | ${${dut2_vhost2}}
+| | Then Send and receive ICMPv6 bidirectionally
+| | ... | ${tg_node} | ${tg_to_dut1} | ${tg_to_dut2}
+| | [Teardown] | Run Keywords | Show Packet Trace on All DUTs | ${nodes}
+| | ... | AND | Show vpp trace dump on all DUTs
+| | ... | AND | Run keyword | Qemu Teardown | ${dut1_node}
+| | ...                                     | ${${qemu1}} | ${qemu1}
+| | ... | AND | Run keyword | Qemu Teardown | ${dut2_node}
+| | ...                                     | ${${qemu2}} | ${qemu2}
+| | ... | AND | Check VPP PID in Teardown