CSIT-687: Directory structure reorganization

Change-Id: I772c9e214be2461adf58124998d272e7d795220f
Signed-off-by: Tibor Frank <tifrank@cisco.com>
Signed-off-by: Maciek Konstantynowicz <mkonstan@cisco.com>

1 files changed, 0 insertions, 203 deletions

diff --git a/tests/func/vxlan/eth4p-ethip6vxlan-l2bdbasemaclrn-l2shg-func.robot b/tests/func/vxlan/eth4p-ethip6vxlan-l2bdbasemaclrn-l2shg-func.robot
deleted file mode 100644
index e4dec5bd1e..0000000000
--- a/tests/func/vxlan/eth4p-ethip6vxlan-l2bdbasemaclrn-l2shg-func.robot
+++ /dev/null
@@ -1,203 +0,0 @@
-# Copyright (c) 2016 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Resource | resources/libraries/robot/default.robot
-| Resource | resources/libraries/robot/testing_path.robot
-| Resource | resources/libraries/robot/vxlan.robot
-| Resource | resources/libraries/robot/l2_traffic.robot
-| Resource | resources/libraries/robot/qemu.robot
-| Resource | resources/libraries/robot/double_qemu_setup.robot
-| Library  | resources.libraries.python.Trace
-| Library | resources.libraries.python.IPv6Setup
-| Force Tags | 3_NODE_SINGLE_LINK_TOPO | VM_ENV | HW_ENV
-| Test Setup | Set up functional test
-| Test Teardown | Tear down functional test
-| Documentation | *L2BD with SHG combined with VXLAN test cases - IPv6*
-| ...
-| ... | *[Top] Network topologies:* TG=DUT1=DUT2=TG 3-node circular topology
-| ... | with double parallel links.
-| ... | *[Enc] Packet encapsulations:* th-IPv6-VXLAN-Eth-IPv6-ICMPv6 on
-| ... | DUT1-DUT2, Eth-IPv6-ICMPv6 on TG-DUTn for L2 switching of IPv6.
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2
-| ... | bridge-domain (L2BD) switching combined with MAC learning enabled
-| ... | and Split Horizon Groups (SHG); VXLAN tunnels are configured
-| ... | between L2BDs on DUT1 and DUT2.
-| ... | *[Ver] TG verification:* Test ICMPv4 Echo Request packets are sent
-| ... | in both directions by TG on links to DUT1 and DUT2; on receive TG
-| ... | verifies packets for correctness and their IPv6 src-addr, dst-addr
-| ... | and MAC addresses.
-| ... | *[Ref] Applicable standard specifications:* RFC7348.
-
-*** Variables ***
-| ${vni_1}= | 23
-| ${vni_2}= | 35
-
-| ${bd_id1}= | 10
-| ${bd_id2}= | 20
-| ${bd_id3}= | 30
-| ${shg1}= | 1
-| ${shg2}= | 2
-
-| ${ip6_addr1}= | 3ffe:64::1
-| ${ip6_addr2}= | 3ffe:64::2
-| ${ip6_prefix}= | 64
-
-*** Test Cases ***
-| TC01: DUT1 and DUT2 with L2BD and VXLANoIPv6 tunnels in SHG switch ICMPv6 between TG links
-| | [Documentation]
-| | ... | [Top] TG=DUT1=DUT2=TG. [Enc] Eth-IPv6-VXLAN-Eth-IPv6-ICMPv6 on \
-| | ... | DUT1-DUT2; Eth-IPv6-ICMPv6 on TG-DUTn. [Cfg] On DUT1 configure L2
-| | ... | bridge-domain (MAC learning enabled) with two untagged interfaces
-| | ... | to TG and two VXLAN interfaces towards the DUT2 and put both VXLAN
-| | ... | interfaces into the same Split-Horizon-Group (SHG). On DUT2 configure
-| | ... | two L2 bridge-domain (MAC learning enabled), each with one untagged
-| | ... | interface to TG and one VXLAN interface towards the DUT1. [Ver] Make
-| | ... | TG send ICMPv6 Echo Reqs between all four of its interfaces to be
-| | ... | switched by DUT1 and DUT2; verify packets are not switched between
-| | ... | TG interfaces connected to DUT2 that are isolated by SHG on DUT1.
-| | ... | [Ref] RFC7348.
-| | [Tags] | 3_NODE_DOUBLE_LINK_TOPO
-| | Given Configure path for 3-node BD-SHG test | ${nodes['TG']}
-| | ...                                         | ${nodes['DUT1']}
-| | ...                                         | ${nodes['DUT2']}
-| | And Set interfaces in 3-node BD-SHG test up
-| | And Set Interface Address | ${dut1_node} | ${dut1_to_dut2} | ${ip6_addr1}
-| | ...                       | ${ip6_prefix}
-| | And Set Interface Address | ${dut2_node} | ${dut2_to_dut1} | ${ip6_addr2}
-| | ...                       | ${ip6_prefix}
-| | And VPP IP Probe | ${dut1_node} | ${dut1_to_dut2} | ${ip6_addr2}
-| | And VPP IP Probe | ${dut2_node} | ${dut2_to_dut1} | ${ip6_addr1}
-| | And Vpp All RA Suppress Link Layer | ${nodes}
-| | ${dut1s_vxlan1}= | When Create VXLAN interface | ${dut1_node} | ${vni_1}
-| | | ...                                          | ${ip6_addr1} | ${ip6_addr2}
-| | ${dut1s_vxlan2}= | And Create VXLAN interface | ${dut1_node} | ${vni_2}
-| | | ...                                         | ${ip6_addr1} | ${ip6_addr2}
-| | ${dut2s_vxlan1}= | And Create VXLAN interface | ${dut2_node} | ${vni_1}
-| | | ...                                         | ${ip6_addr2} | ${ip6_addr1}
-| | ${dut2s_vxlan2}= | And Create VXLAN interface | ${dut2_node} | ${vni_2}
-| | | ...                                         | ${ip6_addr2} | ${ip6_addr1}
-| | And Set Interface State | ${dut1_node} | ${dut1s_vxlan1} | up
-| | And Set Interface State | ${dut1_node} | ${dut1s_vxlan2} | up
-| | And Set Interface State | ${dut2_node} | ${dut2s_vxlan1} | up
-| | And Set Interface State | ${dut2_node} | ${dut2s_vxlan2} | up
-| | And Vpp Node Interfaces Ready Wait | ${dut1_node}
-| | And Vpp Node Interfaces Ready Wait | ${dut2_node}
-| | And Create bridge domain | ${dut1_node} | ${bd_id1}
-| | And Add interface to bridge domain | ${dut1_node} | ${dut1_to_tg_if1}
-| | ...                                     | ${bd_id1}
-| | And Add interface to bridge domain | ${dut1_node} | ${dut1_to_tg_if2}
-| | ...                                     | ${bd_id1}
-| | And Add interface to bridge domain | ${dut1_node} | ${dut1s_vxlan1}
-| | ...                                     | ${bd_id1} | ${shg1}
-| | And Add interface to bridge domain | ${dut1_node} | ${dut1s_vxlan2}
-| | ...                                     | ${bd_id1} | ${shg1}
-| | And Create bridge domain | ${dut2_node} | ${bd_id2}
-| | And Add interface to bridge domain | ${dut2_node} | ${dut2_to_tg_if1}
-| | ...                                     | ${bd_id2}
-| | And Add interface to bridge domain | ${dut2_node} | ${dut2s_vxlan1}
-| | ...                                     | ${bd_id2}
-| | And Create bridge domain | ${dut2_node} | ${bd_id3}
-| | And Add interface to bridge domain | ${dut2_node} | ${dut2_to_tg_if2}
-| | ...                                     | ${bd_id3}
-| | And Add interface to bridge domain | ${dut2_node} | ${dut2s_vxlan2}
-| | ...                                     | ${bd_id3}
-| | Then Send ICMPv6 bidirectionally and verify received packets | ${tg_node}
-| | ...                                          | ${tg_to_dut1_if1}
-| | ...                                          | ${tg_to_dut2_if1}
-| | And Send ICMPv6 bidirectionally and verify received packets | ${tg_node}
-| | ...                                         | ${tg_to_dut1_if1}
-| | ...                                         | ${tg_to_dut2_if2}
-| | And Send ICMPv6 bidirectionally and verify received packets | ${tg_node}
-| | ...                                         | ${tg_to_dut1_if2}
-| | ...                                         | ${tg_to_dut2_if1}
-| | And Send ICMPv6 bidirectionally and verify received packets | ${tg_node}
-| | ...                                         | ${tg_to_dut1_if2}
-| | ...                                         | ${tg_to_dut2_if2}
-| | And Run Keyword And Expect Error | ICMP echo Rx timeout
-| | ...                              | Send ICMPv6 bidirectionally and verify received packets
-| | | ...                            | ${tg_node} | ${tg_to_dut2_if1}
-| | | ...                            | ${tg_to_dut2_if2}
-
-| TC02: DUT1 and DUT2 with L2BD and VXLANoIPv6 tunnels in different SHGs switch ICMPv6 between TG links
-| | [Documentation]
-| | ... | [Top] TG=DUT1=DUT2=TG.[Enc] Eth-IPv6-VXLAN-Eth-IPv6-ICMPv6 on \
-| | ... | DUT1-DUT2; Eth-IPv6-ICMPv6 on TG-DUTn. [Cfg] On DUT1 configure L2
-| | ... | bridge-domain (MAC learning enabled) with two untagged interfaces
-| | ... | to TG and two VXLAN interfaces towards the DUT2 and put both VXLAN
-| | ... | interfaces into the different Split-Horizon-Group (SHGs). On DUT2
-| | ... | configure two L2 bridge-domain (MAC learning enabled), each with one
-| | ... | untagged interface to TG and one VXLAN interface towards the DUT1.
-| | ... | [Ver] Make TG send ICMPv6 Echo Req between all four of its interfaces
-| | ... | to be switched by DUT1 and DUT2; verify packets are switched between
-| | ... | all TG interfaces. [Ref] RFC7348.
-| | [Tags] | 3_NODE_DOUBLE_LINK_TOPO
-| | Given Configure path for 3-node BD-SHG test | ${nodes['TG']}
-| | ...                                         | ${nodes['DUT1']}
-| | ...                                         | ${nodes['DUT2']}
-| | And Set interfaces in 3-node BD-SHG test up
-| | And Set Interface Address | ${dut1_node} | ${dut1_to_dut2} | ${ip6_addr1}
-| | ...                       | ${ip6_prefix}
-| | And Set Interface Address | ${dut2_node} | ${dut2_to_dut1} | ${ip6_addr2}
-| | ...                       | ${ip6_prefix}
-| | And VPP IP Probe | ${dut1_node} | ${dut1_to_dut2} | ${ip6_addr2}
-| | And VPP IP Probe | ${dut2_node} | ${dut2_to_dut1} | ${ip6_addr1}
-| | And Vpp All RA Suppress Link Layer | ${nodes}
-| | ${dut1s_vxlan1}= | When Create VXLAN interface | ${dut1_node} | ${vni_1}
-| | | ...                                          | ${ip6_addr1} | ${ip6_addr2}
-| | ${dut1s_vxlan2}= | And Create VXLAN interface | ${dut1_node} | ${vni_2}
-| | | ...                                         | ${ip6_addr1} | ${ip6_addr2}
-| | ${dut2s_vxlan1}= | And Create VXLAN interface | ${dut2_node} | ${vni_1}
-| | | ...                                         | ${ip6_addr2} | ${ip6_addr1}
-| | ${dut2s_vxlan2}= | And Create VXLAN interface | ${dut2_node} | ${vni_2}
-| | | ...                                         | ${ip6_addr2} | ${ip6_addr1}
-| | And Set Interface State | ${dut1_node} | ${dut1s_vxlan1} | up
-| | And Set Interface State | ${dut1_node} | ${dut1s_vxlan2} | up
-| | And Set Interface State | ${dut2_node} | ${dut2s_vxlan1} | up
-| | And Set Interface State | ${dut2_node} | ${dut2s_vxlan2} | up
-| | And Vpp Node Interfaces Ready Wait | ${dut1_node}
-| | And Vpp Node Interfaces Ready Wait | ${dut2_node}
-| | And Create bridge domain | ${dut1_node} | ${bd_id1}
-| | And Add interface to bridge domain | ${dut1_node} | ${dut1_to_tg_if1}
-| | ...                                     | ${bd_id1}
-| | And Add interface to bridge domain | ${dut1_node} | ${dut1_to_tg_if2}
-| | ...                                     | ${bd_id1}
-| | And Add interface to bridge domain | ${dut1_node} | ${dut1s_vxlan1}
-| | ...                                     | ${bd_id1} | ${shg1}
-| | And Add interface to bridge domain | ${dut1_node} | ${dut1s_vxlan2}
-| | ...                                     | ${bd_id1} | ${shg2}
-| | And Create bridge domain | ${dut2_node} | ${bd_id2}
-| | And Add interface to bridge domain | ${dut2_node} | ${dut2_to_tg_if1}
-| | ...                                     | ${bd_id2}
-| | And Add interface to bridge domain | ${dut2_node} | ${dut2s_vxlan1}
-| | ...                                     | ${bd_id2}
-| | And Create bridge domain | ${dut2_node} | ${bd_id3}
-| | And Add interface to bridge domain | ${dut2_node} | ${dut2_to_tg_if2}
-| | ...                                     | ${bd_id3}
-| | And Add interface to bridge domain | ${dut2_node} | ${dut2s_vxlan2}
-| | ...                                     | ${bd_id3}
-| | Then Send ICMPv6 bidirectionally and verify received packets | ${tg_node}
-| | ...                                          | ${tg_to_dut1_if1}
-| | ...                                          | ${tg_to_dut2_if1}
-| | And Send ICMPv6 bidirectionally and verify received packets | ${tg_node}
-| | ...                                         | ${tg_to_dut1_if1}
-| | ...                                         | ${tg_to_dut2_if2}
-| | And Send ICMPv6 bidirectionally and verify received packets | ${tg_node}
-| | ...                                         | ${tg_to_dut1_if2}
-| | ...                                         | ${tg_to_dut2_if1}
-| | And Send ICMPv6 bidirectionally and verify received packets | ${tg_node}
-| | ...                                         | ${tg_to_dut1_if2}
-| | ...                                         | ${tg_to_dut2_if2}
-| | And Send ICMPv6 bidirectionally and verify received packets | ${tg_node}
-| | ...                                         | ${tg_to_dut2_if1}
-| | ...                                         | ${tg_to_dut2_if2}