csit-func-tc-naming-change - phase 1

- change of ts directories
- change of ts file names
- splitting of former files to more files when suitable
- more details:
  https://wiki.fd.io/view/CSIT/csit-perf-tc-naming-change

Change-Id: Ifda1038f8323735f86c1be7ba7f93e3fda183618
Signed-off-by: Jan Gelety <jgelety@cisco.com>

1 files changed, 200 insertions, 0 deletions

diff --git a/tests/func/vxlan/eth4p-ethip6vxlan-l2bdbasemaclrn-l2shg-func.robot b/tests/func/vxlan/eth4p-ethip6vxlan-l2bdbasemaclrn-l2shg-func.robot
new file mode 100644
index 0000000000..2ed07462cf
--- /dev/null
+++ b/tests/func/vxlan/eth4p-ethip6vxlan-l2bdbasemaclrn-l2shg-func.robot
@@ -0,0 +1,200 @@
+# Copyright (c) 2016 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/default.robot
+| Resource | resources/libraries/robot/testing_path.robot
+| Resource | resources/libraries/robot/vxlan.robot
+| Resource | resources/libraries/robot/l2_traffic.robot
+| Resource | resources/libraries/robot/qemu.robot
+| Resource | resources/libraries/robot/double_qemu_setup.robot
+| Library  | resources.libraries.python.Trace
+| Force Tags | 3_NODE_SINGLE_LINK_TOPO | VM_ENV | HW_ENV
+| Test Setup | Func Test Setup
+| Test Teardown | Func Test Teardown
+| Documentation | *L2BD with SHG combined with VXLAN test cases - IPv6*
+| ...
+| ... | *[Top] Network topologies:* TG=DUT1=DUT2=TG 3-node circular topology
+| ... | with double parallel links.
+| ... | *[Enc] Packet encapsulations:* th-IPv6-VXLAN-Eth-IPv6-ICMPv6 on
+| ... | DUT1-DUT2, Eth-IPv6-ICMPv6 on TG-DUTn for L2 switching of IPv6.
+| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2
+| ... | bridge-domain (L2BD) switching combined with MAC learning enabled
+| ... | and Split Horizon Groups (SHG); VXLAN tunnels are configured
+| ... | between L2BDs on DUT1 and DUT2.
+| ... | *[Ver] TG verification:* Test ICMPv4 Echo Request packets are sent
+| ... | in both directions by TG on links to DUT1 and DUT2; on receive TG
+| ... | verifies packets for correctness and their IPv6 src-addr, dst-addr
+| ... | and MAC addresses.
+| ... | *[Ref] Applicable standard specifications:* RFC7348.
+
+*** Variables ***
+| ${vni_1}= | 23
+| ${vni_2}= | 35
+
+| ${bd_id1}= | 10
+| ${bd_id2}= | 20
+| ${bd_id3}= | 30
+| ${shg1}= | 1
+| ${shg2}= | 2
+
+| ${ip6_addr1}= | 3ffe:64::1
+| ${ip6_addr2}= | 3ffe:64::2
+| ${ip6_prefix}= | 64
+
+*** Test Cases ***
+| TC01: DUT1 and DUT2 with L2BD and VXLANoIPv6 tunnels in SHG switch ICMPv6 between TG links
+| | [Documentation]
+| | ... | [Top] TG=DUT1=DUT2=TG. [Enc] Eth-IPv6-VXLAN-Eth-IPv6-ICMPv6 on \
+| | ... | DUT1-DUT2; Eth-IPv6-ICMPv6 on TG-DUTn. [Cfg] On DUT1 configure L2
+| | ... | bridge-domain (MAC learning enabled) with two untagged interfaces
+| | ... | to TG and two VXLAN interfaces towards the DUT2 and put both VXLAN
+| | ... | interfaces into the same Split-Horizon-Group (SHG). On DUT2 configure
+| | ... | two L2 bridge-domain (MAC learning enabled), each with one untagged
+| | ... | interface to TG and one VXLAN interface towards the DUT1. [Ver] Make
+| | ... | TG send ICMPv6 Echo Reqs between all four of its interfaces to be
+| | ... | switched by DUT1 and DUT2; verify packets are not switched between
+| | ... | TG interfaces connected to DUT2 that are isolated by SHG on DUT1.
+| | ... | [Ref] RFC7348.
+| | [Tags] | 3_NODE_DOUBLE_LINK_TOPO
+| | Given Path for 3-node BD-SHG testing is set | ${nodes['TG']}
+| | ...                                         | ${nodes['DUT1']}
+| | ...                                         | ${nodes['DUT2']}
+| | And Interfaces in 3-node BD-SHG testing are up
+| | And Set Interface Address | ${dut1_node} | ${dut1_to_dut2} | ${ip6_addr1}
+| | ...                       | ${ip6_prefix}
+| | And Set Interface Address | ${dut2_node} | ${dut2_to_dut1} | ${ip6_addr2}
+| | ...                       | ${ip6_prefix}
+| | And VPP IP Probe | ${dut1_node} | ${dut1_to_dut2} | ${ip6_addr2}
+| | And VPP IP Probe | ${dut2_node} | ${dut2_to_dut1} | ${ip6_addr1}
+| | ${dut1s_vxlan1}= | When Create VXLAN interface | ${dut1_node} | ${vni_1}
+| | | ...                                          | ${ip6_addr1} | ${ip6_addr2}
+| | ${dut1s_vxlan2}= | And Create VXLAN interface | ${dut1_node} | ${vni_2}
+| | | ...                                         | ${ip6_addr1} | ${ip6_addr2}
+| | ${dut2s_vxlan1}= | And Create VXLAN interface | ${dut2_node} | ${vni_1}
+| | | ...                                         | ${ip6_addr2} | ${ip6_addr1}
+| | ${dut2s_vxlan2}= | And Create VXLAN interface | ${dut2_node} | ${vni_2}
+| | | ...                                         | ${ip6_addr2} | ${ip6_addr1}
+| | And Set Interface State | ${dut1_node} | ${dut1s_vxlan1} | up
+| | And Set Interface State | ${dut1_node} | ${dut1s_vxlan2} | up
+| | And Set Interface State | ${dut2_node} | ${dut2s_vxlan1} | up
+| | And Set Interface State | ${dut2_node} | ${dut2s_vxlan2} | up
+| | And Vpp Node Interfaces Ready Wait | ${dut1_node}
+| | And Vpp Node Interfaces Ready Wait | ${dut2_node}
+| | And Bridge domain on DUT node is created | ${dut1_node} | ${bd_id1}
+| | And Interface is added to bridge domain | ${dut1_node} | ${dut1_to_tg_if1}
+| | ...                                     | ${bd_id1}
+| | And Interface is added to bridge domain | ${dut1_node} | ${dut1_to_tg_if2}
+| | ...                                     | ${bd_id1}
+| | And Interface is added to bridge domain | ${dut1_node} | ${dut1s_vxlan1}
+| | ...                                     | ${bd_id1} | ${shg1}
+| | And Interface is added to bridge domain | ${dut1_node} | ${dut1s_vxlan2}
+| | ...                                     | ${bd_id1} | ${shg1}
+| | And Bridge domain on DUT node is created | ${dut2_node} | ${bd_id2}
+| | And Interface is added to bridge domain | ${dut2_node} | ${dut2_to_tg_if1}
+| | ...                                     | ${bd_id2}
+| | And Interface is added to bridge domain | ${dut2_node} | ${dut2s_vxlan1}
+| | ...                                     | ${bd_id2}
+| | And Bridge domain on DUT node is created | ${dut2_node} | ${bd_id3}
+| | And Interface is added to bridge domain | ${dut2_node} | ${dut2_to_tg_if2}
+| | ...                                     | ${bd_id3}
+| | And Interface is added to bridge domain | ${dut2_node} | ${dut2s_vxlan2}
+| | ...                                     | ${bd_id3}
+| | Then Send and receive ICMPv6 bidirectionally | ${tg_node}
+| | ...                                          | ${tg_to_dut1_if1}
+| | ...                                          | ${tg_to_dut2_if1}
+| | And Send and receive ICMPv6 bidirectionally | ${tg_node}
+| | ...                                         | ${tg_to_dut1_if1}
+| | ...                                         | ${tg_to_dut2_if2}
+| | And Send and receive ICMPv6 bidirectionally | ${tg_node}
+| | ...                                         | ${tg_to_dut1_if2}
+| | ...                                         | ${tg_to_dut2_if1}
+| | And Send and receive ICMPv6 bidirectionally | ${tg_node}
+| | ...                                         | ${tg_to_dut1_if2}
+| | ...                                         | ${tg_to_dut2_if2}
+| | And Run Keyword And Expect Error | ICMP echo Rx timeout
+| | ...                              | Send and receive ICMPv6 bidirectionally
+| | | ...                            | ${tg_node} | ${tg_to_dut2_if1}
+| | | ...                            | ${tg_to_dut2_if2}
+
+| TC02: DUT1 and DUT2 with L2BD and VXLANoIPv6 tunnels in different SHGs switch ICMPv6 between TG links
+| | [Documentation]
+| | ... | [Top] TG=DUT1=DUT2=TG.[Enc] Eth-IPv6-VXLAN-Eth-IPv6-ICMPv6 on \
+| | ... | DUT1-DUT2; Eth-IPv6-ICMPv6 on TG-DUTn. [Cfg] On DUT1 configure L2
+| | ... | bridge-domain (MAC learning enabled) with two untagged interfaces
+| | ... | to TG and two VXLAN interfaces towards the DUT2 and put both VXLAN
+| | ... | interfaces into the different Split-Horizon-Group (SHGs). On DUT2
+| | ... | configure two L2 bridge-domain (MAC learning enabled), each with one
+| | ... | untagged interface to TG and one VXLAN interface towards the DUT1.
+| | ... | [Ver] Make TG send ICMPv6 Echo Req between all four of its interfaces
+| | ... | to be switched by DUT1 and DUT2; verify packets are switched between
+| | ... | all TG interfaces. [Ref] RFC7348.
+| | [Tags] | 3_NODE_DOUBLE_LINK_TOPO
+| | Given Path for 3-node BD-SHG testing is set | ${nodes['TG']}
+| | ...                                         | ${nodes['DUT1']}
+| | ...                                         | ${nodes['DUT2']}
+| | And Interfaces in 3-node BD-SHG testing are up
+| | And Set Interface Address | ${dut1_node} | ${dut1_to_dut2} | ${ip6_addr1}
+| | ...                       | ${ip6_prefix}
+| | And Set Interface Address | ${dut2_node} | ${dut2_to_dut1} | ${ip6_addr2}
+| | ...                       | ${ip6_prefix}
+| | And VPP IP Probe | ${dut1_node} | ${dut1_to_dut2} | ${ip6_addr2}
+| | And VPP IP Probe | ${dut2_node} | ${dut2_to_dut1} | ${ip6_addr1}
+| | ${dut1s_vxlan1}= | When Create VXLAN interface | ${dut1_node} | ${vni_1}
+| | | ...                                          | ${ip6_addr1} | ${ip6_addr2}
+| | ${dut1s_vxlan2}= | And Create VXLAN interface | ${dut1_node} | ${vni_2}
+| | | ...                                         | ${ip6_addr1} | ${ip6_addr2}
+| | ${dut2s_vxlan1}= | And Create VXLAN interface | ${dut2_node} | ${vni_1}
+| | | ...                                         | ${ip6_addr2} | ${ip6_addr1}
+| | ${dut2s_vxlan2}= | And Create VXLAN interface | ${dut2_node} | ${vni_2}
+| | | ...                                         | ${ip6_addr2} | ${ip6_addr1}
+| | And Set Interface State | ${dut1_node} | ${dut1s_vxlan1} | up
+| | And Set Interface State | ${dut1_node} | ${dut1s_vxlan2} | up
+| | And Set Interface State | ${dut2_node} | ${dut2s_vxlan1} | up
+| | And Set Interface State | ${dut2_node} | ${dut2s_vxlan2} | up
+| | And Vpp Node Interfaces Ready Wait | ${dut1_node}
+| | And Vpp Node Interfaces Ready Wait | ${dut2_node}
+| | And Bridge domain on DUT node is created | ${dut1_node} | ${bd_id1}
+| | And Interface is added to bridge domain | ${dut1_node} | ${dut1_to_tg_if1}
+| | ...                                     | ${bd_id1}
+| | And Interface is added to bridge domain | ${dut1_node} | ${dut1_to_tg_if2}
+| | ...                                     | ${bd_id1}
+| | And Interface is added to bridge domain | ${dut1_node} | ${dut1s_vxlan1}
+| | ...                                     | ${bd_id1} | ${shg1}
+| | And Interface is added to bridge domain | ${dut1_node} | ${dut1s_vxlan2}
+| | ...                                     | ${bd_id1} | ${shg2}
+| | And Bridge domain on DUT node is created | ${dut2_node} | ${bd_id2}
+| | And Interface is added to bridge domain | ${dut2_node} | ${dut2_to_tg_if1}
+| | ...                                     | ${bd_id2}
+| | And Interface is added to bridge domain | ${dut2_node} | ${dut2s_vxlan1}
+| | ...                                     | ${bd_id2}
+| | And Bridge domain on DUT node is created | ${dut2_node} | ${bd_id3}
+| | And Interface is added to bridge domain | ${dut2_node} | ${dut2_to_tg_if2}
+| | ...                                     | ${bd_id3}
+| | And Interface is added to bridge domain | ${dut2_node} | ${dut2s_vxlan2}
+| | ...                                     | ${bd_id3}
+| | Then Send and receive ICMPv6 bidirectionally | ${tg_node}
+| | ...                                          | ${tg_to_dut1_if1}
+| | ...                                          | ${tg_to_dut2_if1}
+| | And Send and receive ICMPv6 bidirectionally | ${tg_node}
+| | ...                                         | ${tg_to_dut1_if1}
+| | ...                                         | ${tg_to_dut2_if2}
+| | And Send and receive ICMPv6 bidirectionally | ${tg_node}
+| | ...                                         | ${tg_to_dut1_if2}
+| | ...                                         | ${tg_to_dut2_if1}
+| | And Send and receive ICMPv6 bidirectionally | ${tg_node}
+| | ...                                         | ${tg_to_dut1_if2}
+| | ...                                         | ${tg_to_dut2_if2}
+| | And Send and receive ICMPv6 bidirectionally | ${tg_node}
+| | ...                                         | ${tg_to_dut2_if1}
+| | ...                                         | ${tg_to_dut2_if2}