HC Tests: move honeycomb tests out of vpp directory

https://gerrit.fd.io/r/#/c/9257/ moved VPP instalation
to vpp/func/__init__.robot,
which is run before Honeycomb suite.

Instalation process starts with removing all vpp packages,
which fails because of honeycomb dependency installed by bootstrap script.

This patch fixes HC func jobs by moving them to separate dir.
The honeycomb/func/__init__.robot was updated
to include previous content of vpp/func/__init__.robot.

HC perf jobs were also moved,
but they may require additional care (CSIT-1006).

Change-Id: I99d94272c80a4c57c85ec5cf99cddfbeab7de663
Signed-off-by: Marek Gradzki <mgradzki@cisco.com>

1 files changed, 131 insertions, 0 deletions

diff --git a/tests/honeycomb/func/mgmt-cfg-dhcp-apihc-apivat-func.robot b/tests/honeycomb/func/mgmt-cfg-dhcp-apihc-apivat-func.robot
new file mode 100644
index 0000000000..958b27fd32
--- /dev/null
+++ b/tests/honeycomb/func/mgmt-cfg-dhcp-apihc-apivat-func.robot
@@ -0,0 +1,131 @@
+# Copyright (c) 2017 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/shared/default.robot
+| Resource | resources/libraries/robot/shared/testing_path.robot
+| Resource | resources/libraries/robot/features/dhcp_proxy.robot
+| Resource | resources/libraries/robot/honeycomb/honeycomb.robot
+| Resource | resources/libraries/robot/honeycomb/interfaces.robot
+| Resource | resources/libraries/robot/honeycomb/dhcp.robot
+| Library | resources.libraries.python.Trace
+| Library | resources.libraries.python.IPv4Setup
+| Library | resources.libraries.python.IPv6Setup
+| Library | resources.libraries.python.IPv6Util
+| Library | resources.libraries.python.Routing
+| Variables | resources/test_data/honeycomb/dhcp_relay.py
+| ...
+| ...
+| Documentation | *Honeycomb DHCP relay test suite.*
+| ...
+| Suite Setup | Set Up Honeycomb Functional Test Suite | ${node}
+| ...
+| Suite Teardown | Tear Down Honeycomb Functional Test Suite | ${node}
+| ...
+| Force Tags | HC_FUNC
+
+*** Test Cases ***
+| TC01: Honeycomb can configure DHCP relay entry
+| | [Documentation]
+| | ... | [Top] TG=DUT1=TG.
+| | ... | [Enc] Eth-IPv4-DHCP.
+| | ... | [Cfg] (Using Honeycomb API) On DUT1 configure IP addresses\
+| | ... | neighbors and configure DHCP relay.
+| | ... | [Ver] Send DHCP packets from TG interface to DUT. Receive all packets\
+| | ... | on the second TG interface and verify required fields.
+| | ...
+| | [Teardown] | Run Keywords | Show Packet Trace on All DUTs | ${nodes}
+| | ... | AND | Log DHCP relay configuration from VAT | ${node} | ipv4
+| | ...
+| | Given DHCP relay Operational Data From Honeycomb Should Be empty | ${node}
+| | When Honeycomb configures DHCP relay | ${node} | ${relay1} | ipv4 | ${0}
+| | Then DHCP relay configuration from Honeycomb should contain
+| | ... | ${node} | ${relay1_oper}
+| | When DHCP relay test setup
+| | Then Send DHCP messages and check answer | ${tg_node} | ${tg_to_dut_if1}
+| | ... | ${tg_to_dut_if2} | ${dhcp_server1_ip} | ${tg_to_dut_if2_mac}
+| | ... | ${client_ip} | ${tg_to_dut_if1_mac} | ${dut_to_tg_if1_ip}
+
+| TC02: Honeycomb can remove DHCP relay entry
+| | [Documentation] | Remove DHCP relay configuration, and verify that\
+| | ... | it was removed.
+| | ...
+| | Given DHCP relay configuration from Honeycomb should contain
+| | ... | ${node} | ${relay1_oper}
+| | When Honeycomb clears DHCP relay configuration | ${node}
+| | Then DHCP relay Operational Data From Honeycomb Should Be empty | ${node}
+
+| TC03: Honeycomb can configure multiple DHCP relay servers.
+| | [Documentation] | Configure multiple DHCP relay servers and verify\
+| | ... | their configuration using operational data.
+| | ...
+| | [Teardown] | Honeycomb clears DHCP relay configuration | ${node}
+| | ...
+| | Given DHCP relay Operational Data From Honeycomb Should Be empty | ${node}
+| | And Honeycomb configures DHCP relay | ${node} | ${relay2} | ipv4 | ${0}
+| | Then DHCP relay configuration from Honeycomb should contain
+| | ... | ${node} | ${relay2_oper}
+
+| TC04: Honeycomb can configure DHCP relay entry with ipv6
+| | [Documentation]
+| | ... | [Top] TG=DUT1=TG.
+| | ... | [Enc] Eth-IPv6-DHCPv6.
+| | ... | [Cfg] (Using Honeycomb API) On DUT1 configure IP addresses\
+| | ... | neighbors and configure DHCP relay.
+| | ... | [Ver] Send DHCPv6 packets from TG interface to DUT. Receive all\
+| | ... | packets on the second TG interface and verify required fields.
+| | ...
+| | [Teardown] | Run Keywords | Show Packet Trace on All DUTs | ${nodes}
+| | ... | AND | Log DHCP relay configuration from VAT | ${node} | ipv6
+| | ... | AND | Honeycomb clears DHCP relay configuration | ${node}
+| | ...
+| | Given DHCP relay Operational Data From Honeycomb Should Be empty | ${node}
+| | When Honeycomb configures DHCP relay | ${node} | ${relay_v6} | ipv6 | ${0}
+| | Then DHCP relay configuration from Honeycomb should contain
+| | ... | ${node} | ${relay_v6_oper}
+| | When DHCP relay test setup IPv6
+| | Then Send DHCPv6 Messages | ${tg_node} | ${tg_to_dut_if1} | ${tg_to_dut_if2}
+| | ... | ${dut_to_tg_if1_ip6} | ${dut_to_tg_if1_mac} | ${dhcp_server_ip6}
+| | ... | ${tg_to_dut_if2_mac} | ${tg_to_dut_if1_mac} |  ${dut_to_tg_if2_mac}
+
+*** Keywords ***
+| DHCP relay test setup
+| | Configure path in 2-node circular topology
+| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']}
+| | Honeycomb configures interface state | ${dut_node} | ${dut_to_tg_if1} | up
+| | Honeycomb configures interface state | ${dut_node} | ${dut_to_tg_if2} | up
+| | Honeycomb sets interface IPv4 address with prefix | ${dut_node}
+| | ... | ${dut_to_tg_if1} | ${dut_to_tg_if1_ip} | ${prefix_length}
+| | Honeycomb sets interface IPv4 address with prefix | ${dut_node}
+| | ... | ${dut_to_tg_if2} | ${dut_to_tg_if2_ip} | ${prefix_length}
+| | Add ARP on DUT | ${dut_node} | ${dut_to_tg_if2} | ${dhcp_server1_ip}
+| | ... | ${tg_to_dut_if2_mac}
+| | Add ARP on DUT | ${dut_node} | ${dut_to_tg_if2} | ${dhcp_server2_ip}
+| | ... | ${tg_to_dut_if2_mac}
+| | And VPP Route Add | ${dut_node} | 255.255.255.255 | 32 | ${NONE} | local
+| | ... | ${FALSE} | ${NONE}
+
+| DHCP relay test setup IPv6
+| | Configure path in 2-node circular topology
+| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']}
+| | Honeycomb configures interface state | ${dut_node} | ${dut_to_tg_if1} | up
+| | Honeycomb configures interface state | ${dut_node} | ${dut_to_tg_if2} | up
+| | And Vpp All Ra Suppress Link Layer | ${nodes}
+| | Honeycomb sets interface IPv6 address | ${dut_node}
+| | ... | ${dut_to_tg_if1} | ${dut_to_tg_if1_ip6} | ${prefix_length_v6}
+| | Honeycomb sets interface IPv6 address | ${dut_node}
+| | ... | ${dut_to_tg_if2} | ${dut_to_tg_if2_ip6} | ${prefix_length_v6}
+| | And Add IP Neighbor | ${dut_node} | ${dut_to_tg_if2} | ${dhcp_server_ip6}
+| | ... | ${tg_to_dut_if2_mac}
+| | And VPP Route Add | ${dut_node} | ff02::1:2 | 128 | ${NONE} | local
+| | ... | ${FALSE} | ${NONE}