aboutsummaryrefslogtreecommitdiffstats
path: root/tests/honeycomb/func/mgmt-cfg-lisp-apihc-apivat-func.robot
diff options
context:
space:
mode:
authorPeter Mikus <pmikus@cisco.com>2019-11-11 16:14:32 +0000
committerPeter Mikus <pmikus@cisco.com>2019-11-19 06:43:59 +0000
commite7ad66f3147662973039caaac33015de7e0c6f8c (patch)
tree809a056325425bad672a8a9274c3c2d696a35030 /tests/honeycomb/func/mgmt-cfg-lisp-apihc-apivat-func.robot
parent20cc67d5f23a7f4e05b08012bf3d3a63be4bcf63 (diff)
HONEYCOMB: Remove
Signed-off-by: Peter Mikus <pmikus@cisco.com> Change-Id: I60d80564050cb786c7b1e0a08f31f8292f82197e
Diffstat (limited to 'tests/honeycomb/func/mgmt-cfg-lisp-apihc-apivat-func.robot')
-rw-r--r--tests/honeycomb/func/mgmt-cfg-lisp-apihc-apivat-func.robot310
1 files changed, 0 insertions, 310 deletions
diff --git a/tests/honeycomb/func/mgmt-cfg-lisp-apihc-apivat-func.robot b/tests/honeycomb/func/mgmt-cfg-lisp-apihc-apivat-func.robot
deleted file mode 100644
index 0198e8205c..0000000000
--- a/tests/honeycomb/func/mgmt-cfg-lisp-apihc-apivat-func.robot
+++ /dev/null
@@ -1,310 +0,0 @@
-# Copyright (c) 2016 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Variables***
-| ${ip_address}= | 192.168.0.4
-| @{ip_addresses}= | 192.168.0.5 | 192.168.0.6 | 192.168.0.7 | 192.168.0.8
-| ${state}= | enabled
-| ${interface}= | ${node['interfaces']['port1']['name']}
-| ${bd_name}= | bd_lisp
-| ${bd2_name}= | bd2_lisp
-| &{bd_settings}= | flood=${True} | forward=${True} | learn=${True}
-| ... | unknown-unicast-flood=${True} | arp-termination=${True}
-
-*** Settings ***
-| Library | resources.libraries.python.Trace
-| Resource | resources/libraries/robot/shared/default.robot
-| Resource | resources/libraries/robot/shared/testing_path.robot
-| Resource | resources/libraries/robot/shared/traffic.robot
-| Resource | resources/libraries/robot/honeycomb/honeycomb.robot
-| Resource | resources/libraries/robot/honeycomb/interfaces.robot
-| Resource | resources/libraries/robot/honeycomb/lisp.robot
-| Resource | resources/libraries/robot/honeycomb/bridge_domain.robot
-| Variables | resources/test_data/honeycomb/lisp/lisp.py
-| ...
-| Documentation | *Honeycomb Lisp test suite.*
-| ...
-| Suite Setup | Set Up Honeycomb Functional Test Suite | ${node}
-| ...
-| Suite Teardown | Tear Down Honeycomb Functional Test Suite | ${node}
-| ...
-| Force Tags | HC_FUNC
-
-*** Test Cases ***
-| TC01: Honeycomb enables LISP feature
-| | [Documentation] | Check if Honeycomb can enable the LISP feature.
-| | ...
-| | Given LISP Should Not Be Configured | ${node}
-| | When Honeycomb enables LISP | ${node}
-| | Then LISP state from Honeycomb should be | ${node} | ${state}
-| | And LISP state from VAT should be | ${node} | ${state}
-
-| TC02: Honeycomb adds locator set and locator
-| | [Documentation] | Check if Honeycomb can configure a locator set.
-| | ...
-| | Given LISP state from Honeycomb should be | ${node} | ${state}
-| | When Honeycomb adds locator set | ${node} | ${interface} | ${locator_set}
-| | Then Locator Set From Honeycomb Should Be
-| | ... | ${node} | ${interface} | ${locator_set}
-
-| TC15: Honeycomb can remove configuration of LISP features
-| | [Documentation] | Check if Honeycomb can disable all LISP features.
-| | ...
-| | Given Locator Set From Honeycomb Should Be
-| | ... | ${node} | ${interface} | ${locator_set}
-| | When Honeycomb disables all LISP features | ${node}
-| | Then LISP Should Not Be Configured | ${node}
-
-| TC03: Honeycomb configures LISP - remote mapping - Bridge Domain
-| | [Documentation] | Check if Honeycomb can configure a remote LISP mapping\
-| | ... | with a bridge domain.
-| | ...
-| | Given Honeycomb enables LISP | ${node}
-| | And Honeycomb adds locator set | ${node} | ${interface} | ${locator_set}
-| | And Honeycomb creates first l2 bridge domain
-| | ... | ${node} | ${bd_name} | ${bd_settings}
-| | When Honeycomb adds LISP mapping | ${node} | ${lisp_settings_remote_bd}
-| | Then LISP mapping from Honeycomb should be
-| | ... | ${node} | ${remote_bd_subtable}
-| | And LISP mapping from VAT should be
-| | ... | ${node} | ${vat_remote_bd}
-
-| TC04: Honeycomb can remove LISP mapping
-| | [Documentation] | Check if Honeycomb can remove a configured LISP mapping.
-| | ...
-| | Given LISP mapping from Honeycomb should be
-| | ... | ${node} | ${remote_bd_subtable}
-| | And LISP mapping from VAT should be
-| | ... | ${node} | ${vat_remote_bd}
-| | When Honeycomb removes all LISP mappings | ${node}
-| | Then LISP mappings from Honeycomb should not exist
-| | ... | ${node}
-| | And LISP mappings from VAT should not exist
-| | ... | ${node}
-
-| TC05: Honeycomb configures LISP - remote mapping - VRF
-| | [Documentation] | Check if Honeycomb can configure a remote LISP mapping\
-| | ... | with VRF.
-| | ...
-| | [Teardown] | Honeycomb removes all LISP mappings | ${node}
-| | ...
-| | Given LISP mappings from Honeycomb should not exist
-| | ... | ${node}
-| | And LISP mappings from VAT should not exist
-| | ... | ${node}
-| | When Honeycomb adds LISP mapping | ${node} | ${lisp_settings_remote_vrf}
-| | Then LISP mapping from Honeycomb should be
-| | ... | ${node} | ${remote_vrf_subtable}
-| | And LISP mapping from VAT should be | ${node} | ${vat_remote_vrf}
-
-| TC06: Honeycomb configures LISP - local mapping - Bridge Domain
-| | [Documentation] | Check if Honeycomb can configure a local LISP mapping\
-| | ... | with a bridge domain.
-| | ...
-| | [Teardown] | Honeycomb removes all LISP mappings | ${node}
-| | ...
-| | Given Locator Set From Honeycomb Should Be
-| | ... | ${node} | ${interface} | ${locator_set}
-| | And LISP mappings from Honeycomb should not exist
-| | ... | ${node}
-| | And LISP mappings from VAT should not exist
-| | ... | ${node}
-| | And Honeycomb creates first l2 bridge domain
-| | ... | ${node} | ${bd2_name} | ${bd_settings}
-| | When Honeycomb adds LISP mapping | ${node} | ${lisp_settings_local_bd}
-| | Then LISP mapping from Honeycomb should be | ${node} | ${local_bd_subtable}
-| | And LISP mapping from VAT should be | ${node} | ${vat_local_bd}
-
-| TC07: Honeycomb configures LISP - local mapping - VRF
-| | [Documentation] | Check if Honeycomb can configure a local LISP mapping\
-| | ... | with VRF.
-| | ...
-| | [Teardown] | Honeycomb removes all LISP mappings | ${node}
-| | ...
-| | Given Locator Set From Honeycomb Should Be
-| | ... | ${node} | ${interface} | ${locator_set}
-| | And LISP mappings from Honeycomb should not exist
-| | ... | ${node}
-| | And LISP mappings from VAT should not exist
-| | ... | ${node}
-| | When Honeycomb adds LISP mapping | ${node} | ${lisp_settings_local_vrf}
-| | Then LISP mapping from Honeycomb should be | ${node} | ${local_vrf_subtable}
-| | And LISP mapping from VAT should be | ${node} | ${vat_local_vrf}
-
-| TC08: Honeycomb configures LISP mapping with adjacency
-| | [Documentation] | Check if Honeycomb can configure local and remote LISP\
-| | ... | mappings with VRF, and configure adjacency.
-| | ...
-| | [Teardown] | Honeycomb disables all LISP features | ${node}
-| | ...
-| | Given Locator Set From Honeycomb Should Be
-| | ... | ${node} | ${interface} | ${locator_set}
-| | And LISP mappings from Honeycomb should not exist
-| | ... | ${node}
-| | And LISP mappings from VAT should not exist
-| | ... | ${node}
-| | And Honeycomb adds LISP mapping | ${node} | ${lisp_settings_both_vrf}
-| | When Honeycomb adds LISP adjacency | ${node} | ${7} | remote_map_vrf
-| | ... | adj01 | ${vrf_adjacency}
-| | Then LISP mapping from Honeycomb should be
-| | ... | ${node} | ${adj_subtable}
-
-| TC09: Honeycomb configures LISP Map Resolver
-| | [Documentation] | Check if Honeycomb can configure a LISP Map Resolver.
-| | ...
-| | [Teardown] | Honeycomb disables all LISP features | ${node}
-| | Given Honeycomb enables LISP | ${node}
-| | And Honeycomb adds locator set | ${node} | ${interface} | ${locator_set}
-| | And LISP state from VAT should be | ${node} | ${state}
-| | When Honeycomb adds LISP Map Resolver | ${node} | ${ip_address}
-| | Then Map Resolver from Honeycomb should be | ${node} | ${ip_address}
-| | And Map Resolver from VAT should be | ${node} | ${ip_address}
-
-| TC10: Honeycomb configures LISP Map Server
-| | [Documentation] | Check if Honeycomb can configure a LISP Map Server.
-| | ...
-| | [Teardown] | Honeycomb disables all LISP features | ${node}
-| | Given Honeycomb enables LISP | ${node}
-| | And Honeycomb adds locator set | ${node} | ${interface} | ${locator_set}
-| | Given LISP state from Honeycomb should be | ${node} | ${state}
-| | And LISP state from VAT should be | ${node} | ${state}
-| | When Honeycomb adds LISP Map Server | ${node} | @{ip_addresses}
-| | Then Map Server from Honeycomb should be | ${node} | @{ip_addresses}
-| | And Map Server from VAT should be | ${node} | @{ip_addresses}
-
-| TC11: Honeycomb configures LISP PETR configuration
-| | [Documentation] | Check if Honeycomb can configure LISP
-| | ... | PETR configuration.
-| | ...
-| | [Teardown] | Honeycomb disables all LISP features | ${node}
-| | Given Honeycomb enables LISP | ${node}
-| | And Honeycomb adds locator set | ${node} | ${interface} | ${locator_set}
-| | Given LISP state from Honeycomb should be | ${node} | ${state}
-| | And LISP state from VAT should be | ${node} | ${state}
-| | When Honeycomb enables LISP PETR feature | ${node} | ${ip_address}
-| | Then PETR configuration from Honeycomb should be | ${node} | ${ip_address}
-| | And PETR configuration from VAT should be | ${node} | enabled
-
-| TC12: Honeycomb configures LISP RLOC Probing
-| | [Documentation] | Check if Honeycomb can configure LISP RLOC Probing.
-| | ...
-| | [Teardown] | Honeycomb disables all LISP features | ${node}
-| | Given Honeycomb enables LISP | ${node}
-| | And Honeycomb adds locator set | ${node} | ${interface} | ${locator_set}
-| | Given LISP state from Honeycomb should be | ${node} | ${state}
-| | And LISP state from VAT should be | ${node} | ${state}
-| | When Honeycomb enables LISP RLOC feature | ${node}
-| | Then RLOC Probing from Honeycomb should be | ${node} | ${True}
-| | And RLOC Probing from VAT should be | ${node} | enabled
-
-| TC13: Honeycomb configures LISP Map Register
-| | [Documentation] | Check if Honeycomb can configure a LISP Map Register.
-| | ...
-| | [Teardown] | Honeycomb disables all LISP features | ${node}
-| | Given Honeycomb enables LISP | ${node}
-| | And Honeycomb adds locator set | ${node} | ${interface} | ${locator_set}
-| | Given LISP state from Honeycomb should be | ${node} | ${state}
-| | And LISP state from VAT should be | ${node} | ${state}
-| | When Honeycomb adds LISP Map Register | ${node} | ${True}
-| | Then Map Register from Honeycomb should be | ${node} | ${True}
-| | And Map Register from VAT should be | ${node} | enabled
-
-| TC14: Honeycomb enabled LISP PITR feature
-| | [Documentation] | Check if Honeycomb can configure the LISP PITR feature.
-| | ...
-# HC2VPP-263 Locator set reference in operational data is incorrect
-| | [Tags] | EXPECTED_FAILING
-| | [Teardown] | Honeycomb disables all LISP features | ${node}
-| | Given Honeycomb enables LISP | ${node}
-| | And Honeycomb adds locator set | ${node} | ${interface} | ${locator_set}
-| | When Honeycomb enables LISP PITR feature | ${node} | ${locator_set}
-| | Then PITR config from Honeycomb should be | ${node} | ${locator_set}
-| | And PITR config from VAT should be | ${node} | ${locator_set}
-
-| TC16: Honeycomb can configure LISP for traffic test - IPv4
-| | [Documentation]
-| | ... | [Top] TG-DUT1-TG.
-| | ... | [Enc] Eth-IPv4-LISP.
-| | ... | [Cfg] On DUT1 configure IPv4 LISP static adjacencies with TG.
-| | ... | [Ver] Make TG send ICMPv4 Echo Req between its interfaces through\
-| | ... | DUT1 and verify LISP encapsulation of received packet.
-| | ... | [Ref] RFC6830.
-| | ...
-| | [Teardown] | LISP Functional Traffic Test Teardown
-| | Given Configure path in 2-node circular topology
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']}
-| | And Honeycomb configures interface state
-| | ... | ${dut_node} | ${dut_to_tg_if1} | up
-| | And Honeycomb configures interface state
-| | ... | ${dut_node} | ${dut_to_tg_if2} | up
-| | And Honeycomb sets interface IPv4 address with prefix | ${dut_node}
-| | ... | ${dut_to_tg_if1} | ${dut_to_tg_if1_ip4} | ${prefix_len4}
-| | And Honeycomb sets interface IPv4 address with prefix | ${dut_node}
-| | ... | ${dut_to_tg_if2} | ${dut_to_tg_if2_ip4} | ${prefix_len4}
-| | And Honeycomb adds interface IPv4 neighbor | ${dut_node} | ${dut_to_tg_if1}
-| | ... | ${src_ip4} | ${tg_to_dut_if1_mac}
-| | And Honeycomb adds interface IPv4 neighbor | ${dut_node} | ${dut_to_tg_if2}
-| | ... | ${tg_to_dut_if2_ip4} | ${tg_to_dut_if2_mac}
-| | When Honeycomb enables LISP | ${node}
-| | And Honeycomb adds locator set | ${node} | ${dut_to_tg_if2} | ${locator_set}
-| | And Honeycomb adds LISP mapping | ${node} | ${lisp_traffic_ip4}
-| | Then send packet and verify LISP encap
-| | ... | ${tg_node} | ${src_ip4} | ${dst_ip4}
-| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} | ${dut_to_tg_if1_mac}
-| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if2_mac} | ${tg_to_dut_if2_mac}
-| | ... | ${src_rloc4} | ${dst_rloc4}
-
-| TC17: Honeycomb can configure LISP for traffic test - IPv6
-| | [Documentation]
-| | ... | [Top] TG-DUT1-TG.
-| | ... | [Enc] Eth-IPv6-LISP.
-| | ... | [Cfg] On DUT1 configure IPv6 LISP static adjacencies with TG.
-| | ... | [Ver] Make TG send ICMPv6 Echo Req between its interfaces through\
-| | ... | DUT1 and verify LISP encapsulation of received packet.
-| | ... | [Ref] RFC6830.
-| | ...
-| | [Teardown] | LISP Functional Traffic Test Teardown
-| | Given Configure path in 2-node circular topology
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']}
-| | And Honeycomb configures interface state
-| | ... | ${dut_node} | ${dut_to_tg_if1} | up
-| | And Honeycomb configures interface state
-| | ... | ${dut_node} | ${dut_to_tg_if2} | up
-| | And Honeycomb sets interface IPv6 address | ${dut_node}
-| | ... | ${dut_to_tg_if1} | ${dut_to_tg_if1_ip6} | ${prefix_len6}
-| | And Honeycomb sets interface IPv6 address | ${dut_node}
-| | ... | ${dut_to_tg_if2} | ${dut_to_tg_if2_ip6} | ${prefix_len6}
-| | And Honeycomb adds interface IPv6 neighbor | ${dut_node} | ${dut_to_tg_if1}
-| | ... | ${src_ip6} | ${tg_to_dut_if1_mac}
-| | And Honeycomb adds interface IPv6 neighbor | ${dut_node} | ${dut_to_tg_if2}
-| | ... | ${tg_to_dut_if2_ip6} | ${tg_to_dut_if2_mac}
-| | When Honeycomb enables LISP | ${node}
-| | And Honeycomb adds locator set | ${node} | ${dut_to_tg_if2} | ${locator_set}
-| | And Honeycomb adds LISP mapping | ${node} | ${lisp_traffic_ip6}
-| | Then send packet and verify LISP encap
-| | ... | ${tg_node} | ${src_ip6} | ${dst_ip6}
-| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} | ${dut_to_tg_if1_mac}
-| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if2_mac} | ${tg_to_dut_if2_mac}
-| | ... | ${src_rloc6} | ${dst_rloc6}
-
-| TC18: Honeycomb configures LISP Map Request Mode
-| | [Documentation] | Check if Honeycomb can configure LISP Map Request mode.
-| | ... | Note: Map Request Mode cannot be removed once configured.
-| | ...
-| | [Teardown] | Honeycomb disables LISP | ${node}
-| | ...
-| | Given Honeycomb Enables LISP | ${node}
-| | When Honeycomb sets LISP Map Request Mode | ${node} | ${True}
-| | Then Map Request Mode from Honeycomb should be
-| | ... | ${node} | source-destination
-| | And Map Request Mode from VAT should be | ${node} | src-dst