HONEYCOMB: Remove

Signed-off-by: Peter Mikus <pmikus@cisco.com>
Change-Id: I60d80564050cb786c7b1e0a08f31f8292f82197e

1 files changed, 0 insertions, 226 deletions

diff --git a/tests/honeycomb/func/mgmt-cfg-lispgpe-apihc-apivat-func.robot b/tests/honeycomb/func/mgmt-cfg-lispgpe-apihc-apivat-func.robot
deleted file mode 100644
index a4d66b5581..0000000000
--- a/tests/honeycomb/func/mgmt-cfg-lispgpe-apihc-apivat-func.robot
+++ /dev/null
@@ -1,226 +0,0 @@
-# Copyright (c) 2017 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Variables***
-| ${interface}= | ${node['interfaces']['port1']['name']}
-
-*** Settings ***
-| Library | resources.libraries.python.Trace
-| Resource | resources/libraries/robot/shared/default.robot
-| Resource | resources/libraries/robot/shared/testing_path.robot
-| Resource | resources/libraries/robot/shared/traffic.robot
-| Resource | resources/libraries/robot/honeycomb/honeycomb.robot
-| Resource | resources/libraries/robot/honeycomb/interfaces.robot
-| Resource | resources/libraries/robot/honeycomb/lisp_gpe.robot
-| Variables | resources/test_data/honeycomb/lisp/lisp_gpe.py
-| ...
-| Documentation | *Honeycomb LISP GPE test suite.*
-| ...
-| Suite Setup | Set Up Honeycomb Functional Test Suite | ${node}
-| ...
-| Suite Teardown | Tear Down Honeycomb Functional Test Suite | ${node}
-| ...
-| Force Tags | HC_FUNC
-
-*** Test Cases ***
-| TC01: Honeycomb enables LISP GPE feature
-| | [Documentation] | Check if Honeycomb can enable the LISP GPE feature.
-| | ...
-| | Given LISP GPE Should Not Be Configured | ${node}
-| | When Honeycomb enables LISP GPE | ${node}
-| | Then LISP GPE state from Honeycomb should be | ${node} | enabled
-| | And LISP GPE state from VAT should be | ${node} | enabled
-
-| TC02: Honeycomb disable LISP GPE feature
-| | [Documentation] | Check if Honeycomb can enable the LISP GPE feature.
-| | ...
-| | [Teardown] | Honeycomb enables LISP GPE | ${node}
-| | Given LISP GPE state from Honeycomb should be | ${node} | enabled
-| | And LISP GPE state from VAT should be | ${node} | enabled
-| | When Honeycomb disables LISP GPE | ${node}
-| | Then LISP GPE state from Honeycomb should be | ${node} | disabled
-| | And LISP GPE state from VAT should be | ${node} | disabled
-
-| TC03: Honeycomb configures LISP GPE mapping - negative, IPv4
-| | [Documentation] | Check if Honeycomb can configure a LISP mapping\
-| | ... | with VRF.
-| | ...
-| | Given LISP GPE mappings from Honeycomb should not exist
-| | ... | ${node}
-| | When Honeycomb adds first LISP GPE mapping
-| | ... | ${node} | ${negative_mapping_ip4}
-| | Then LISP GPE mapping from Honeycomb should be
-| | ... | ${node} | ${negative_mapping_ip4}
-
-| TC04: Honeycomb can remove LISP GPE mapping
-| | [Documentation] | Check if Honeycomb can remove a configured LISP GPE\
-| | ... | mapping.
-| | ...
-| | Given LISP GPE mapping from Honeycomb should be
-| | ... | ${node} | ${negative_mapping_ip4}
-| | When Honeycomb removes LISP GPE mapping
-| | ... | ${node} | ${negative_mapping_ip4['id']}
-| | Then LISP GPE mappings from Honeycomb should not exist
-| | ... | ${node}
-
-| TC05: Honeycomb configures LISP GPE mapping - positive, IPv4
-| | [Documentation] | Check if Honeycomb can configure a LISP mapping\
-| | ... | with VRF.
-| | ...
-| | [Teardown] | Honeycomb removes LISP GPE mapping
-| | ... | ${node} | ${positive_mapping_ip4['id']}
-| | Given LISP GPE mappings from Honeycomb should not exist
-| | ... | ${node}
-| | When Honeycomb adds first LISP GPE mapping
-| | ... | ${node} | ${positive_mapping_ip4}
-| | Then LISP GPE mapping from Honeycomb should be
-| | ... | ${node} | ${positive_mapping_ip4}
-
-| TC06: Honeycomb configures LISP GPE mapping - negative, IPv6
-| | [Documentation] | Check if Honeycomb can configure a LISP mapping\
-| | ... | with VRF.
-| | ...
-| | [Teardown] | Honeycomb removes LISP GPE mapping
-| | ... | ${node} | ${negative_mapping_ip6['id']}
-| | Given LISP GPE mappings from Honeycomb should not exist
-| | ... | ${node}
-| | When Honeycomb adds first LISP GPE mapping
-| | ... | ${node} | ${negative_mapping_ip6}
-| | Then LISP GPE mapping from Honeycomb should be
-| | ... | ${node} | ${negative_mapping_ip6}
-
-| TC07: Honeycomb configures LISP GPE mapping - positive, IPv6
-| | [Documentation] | Check if Honeycomb can configure a LISP mapping\
-| | ... | with VRF.
-| | ...
-| | [Teardown] | Honeycomb removes LISP GPE mapping
-| | ... | ${node} | ${positive_mapping_ip6['id']}
-| | Given LISP GPE mappings from Honeycomb should not exist
-| | ... | ${node}
-| | When Honeycomb adds first LISP GPE mapping
-| | ... | ${node} | ${positive_mapping_ip6}
-| | Then LISP GPE mapping from Honeycomb should be
-| | ... | ${node} | ${positive_mapping_ip6}
-
-| TC08: Honeycomb can modify existing LISP GPE mappping
-| | [Documentation] | Check if Honeycomb can modify and existing LISP GPE\
-| | ... | mapping.
-| | ...
-| | [Teardown] | Honeycomb removes LISP GPE mapping
-| | ... | ${node} | ${negative_mapping_ip4_edit['id']}
-| | Given LISP GPE mappings from Honeycomb should not exist
-| | ... | ${node}
-| | When Honeycomb adds first LISP GPE mapping
-| | ... | ${node} | ${negative_mapping_ip4}
-| | Then LISP GPE mapping from Honeycomb should be
-| | ... | ${node} | ${negative_mapping_ip4}
-| | When Honeycomb adds first LISP GPE mapping | ${node}
-| | ... | ${negative_mapping_ip4_edit}
-| | Then LISP GPE mapping from Honeycomb should be
-| | ... | ${node} | ${negative_mapping_ip4_edit}
-
-| TC09: Honeycomb can configure multiple LISP GPE mapppings
-| | [Documentation] | Check if Honeycomb can configure multiple LISP GPE\
-| | ... | mappings at the same time.
-| | ...
-| | [Teardown] | Run Keywords
-| | ... | Honeycomb removes LISP GPE mapping
-| | ... | ${node} | ${negative_mapping_ip4['id']}
-| | ... | AND | Honeycomb removes LISP GPE mapping
-| | ... | ${node} | ${negative_mapping_ip4_2['id']}
-| | Given LISP GPE mappings from Honeycomb should not exist
-| | ... | ${node}
-| | When Honeycomb adds first LISP GPE mapping
-| | ... | ${node} | ${negative_mapping_ip4}
-| | And Honeycomb adds LISP GPE mapping | ${node} | ${negative_mapping_ip4_2}
-| | Then LISP GPE mapping from Honeycomb should be
-| | ... | ${node} | ${negative_mapping_ip4}
-| | And LISP GPE mapping from Honeycomb should be
-| | ... | ${node} | ${negative_mapping_ip4_2}
-
-| TC10: Honeycomb can disable all LISP GPE features
-| | [Documentation] | Check if Honeycomb can disable all LISP GPE features.
-| | ...
-| | Given Honeycomb adds first LISP GPE mapping
-| | ... | ${node} | ${negative_mapping_ip4}
-| | When Honeycomb disables all LISP GPE features | ${node}
-| | Then LISP GPE mappings from Honeycomb should not exist
-| | ... | ${node}
-| | And LISP GPE state from Honeycomb should be | ${node} | disabled
-| | And LISP GPE state from VAT should be | ${node} | disabled
-
-| TC11: Honeycomb can configure LISP GPE for traffic test - IPv4
-| | [Documentation]
-| | ... | [Top] TG-DUT1-TG.
-| | ... | [Enc] Eth-IPv4-LISPGPE-IPv4-ICMPv4
-| | ... | [Cfg] Configure IPv4 LISP static adjacencies on DUT1.
-| | ... | [Ver] Case: ip4-lispgpe-ip4 - phy2lisp
-| | ... | Make TG send ICMPv4 Echo Req between its interfaces through DUT1\
-| | ... | LISP GPE tunnel verify LISP encapsulation of received packet.
-| | ... | [Ref] RFC6830.
-| | ...
-| | [Teardown] | LISPGPE functional traffic test teardown
-| | Given Configure path in 2-node circular topology
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']}
-| | And Honeycomb configures interface state
-| | ... | ${dut_node} | ${dut_to_tg_if1} | up
-| | And Honeycomb configures interface state
-| | ... | ${dut_node} | ${dut_to_tg_if2} | up
-| | And Honeycomb sets interface IPv4 address with prefix | ${dut_node}
-| | ... | ${dut_to_tg_if1} | ${dut_to_tg_if1_ip4} | ${prefix_len4}
-| | And Honeycomb sets interface IPv4 address with prefix | ${dut_node}
-| | ... | ${dut_to_tg_if2} | ${dut_to_tg_if2_ip4} | ${prefix_len4}
-| | And Honeycomb adds interface IPv4 neighbor | ${dut_node} | ${dut_to_tg_if1}
-| | ... | ${src_ip4} | ${tg_to_dut_if1_mac}
-| | And Honeycomb adds interface IPv4 neighbor | ${dut_node} | ${dut_to_tg_if2}
-| | ... | ${tg_to_dut_if2_ip4} | ${tg_to_dut_if2_mac}
-| | When Honeycomb enables LISP GPE | ${node}
-| | And Honeycomb adds LISP GPE mapping | ${node} | ${lisp_traffic_ip4}
-| | Then send packet and verify LISP GPE encap
-| | ... | ${tg_node} | ${src_ip4} | ${dst_ip4}
-| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} | ${dut_to_tg_if1_mac}
-| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if2_mac} | ${tg_to_dut_if2_mac}
-| | ... | ${src_rloc4} | ${dst_rloc4}
-
-| TC12: Honeycomb can configure LISP GPE for traffic test - IPv6
-| | [Documentation]
-| | ... | [Top] TG-DUT1-TG.
-| | ... | [Enc] Eth-IPv6-LISPGPE-IPv6-ICMPv6
-| | ... | [Cfg] Configure IPv6 LISP static adjacencies on DUT1.
-| | ... | [Ver] Case: ip6-lispgpe-ip6 - phy2lisp
-| | ... | Make TG send ICMPv6 Echo Req between its interfaces through DUT1\
-| | ... | LISP GPE tunnel verify LISP encapsulation of received packet.
-| | ... | [Ref] RFC6830.
-| | ...
-| | [Teardown] | LISPGPE functional traffic test teardown
-| | Given Configure path in 2-node circular topology
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']}
-| | And Honeycomb configures interface state
-| | ... | ${dut_node} | ${dut_to_tg_if1} | up
-| | And Honeycomb configures interface state
-| | ... | ${dut_node} | ${dut_to_tg_if2} | up
-| | And Honeycomb sets interface IPv6 address | ${dut_node}
-| | ... | ${dut_to_tg_if1} | ${dut_to_tg_if1_ip6} | ${prefix_len6}
-| | And Honeycomb sets interface IPv6 address | ${dut_node}
-| | ... | ${dut_to_tg_if2} | ${dut_to_tg_if2_ip6} | ${prefix_len6}
-| | And Honeycomb adds interface IPv6 neighbor | ${dut_node} | ${dut_to_tg_if1}
-| | ... | ${src_ip6} | ${tg_to_dut_if1_mac}
-| | And Honeycomb adds interface IPv6 neighbor | ${dut_node} | ${dut_to_tg_if2}
-| | ... | ${tg_to_dut_if2_ip6} | ${tg_to_dut_if2_mac}
-| | When Honeycomb enables LISP GPE | ${node}
-| | And Honeycomb adds LISP GPE mapping | ${node} | ${lisp_traffic_ip6}
-| | Then send packet and verify LISP GPE encap
-| | ... | ${tg_node} | ${src_ip6} | ${dst_ip6}
-| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} | ${dut_to_tg_if1_mac}
-| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if2_mac} | ${tg_to_dut_if2_mac}
-| | ... | ${src_rloc6} | ${dst_rloc6}