HC Tests: move honeycomb tests out of vpp directory

https://gerrit.fd.io/r/#/c/9257/ moved VPP instalation
to vpp/func/__init__.robot,
which is run before Honeycomb suite.

Instalation process starts with removing all vpp packages,
which fails because of honeycomb dependency installed by bootstrap script.

This patch fixes HC func jobs by moving them to separate dir.
The honeycomb/func/__init__.robot was updated
to include previous content of vpp/func/__init__.robot.

HC perf jobs were also moved,
but they may require additional care (CSIT-1006).

Change-Id: I99d94272c80a4c57c85ec5cf99cddfbeab7de663
Signed-off-by: Marek Gradzki <mgradzki@cisco.com>

1 files changed, 137 insertions, 0 deletions

diff --git a/tests/honeycomb/func/mgmt-cfg-vxlan-apihc-apivat-func.robot b/tests/honeycomb/func/mgmt-cfg-vxlan-apihc-apivat-func.robot
new file mode 100644
index 0000000000..76615264c5
--- /dev/null
+++ b/tests/honeycomb/func/mgmt-cfg-vxlan-apihc-apivat-func.robot
@@ -0,0 +1,137 @@
+# Copyright (c) 2016 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Variables ***
+# Interfaces to run tests on.
+| ${interface}= | ${node['interfaces']['port1']['name']}
+| ${vx_interface}= | vx_tunnel_test
+# Configuration which will be set and verified during tests.
+| &{vxlan_settings}= | src=192.168.0.2 | dst=192.168.0.3 | vni=${88}
+| ... | encap-vrf-id=${0}
+| &{vxlan_settings2}= | src=192.168.0.4 | dst=192.168.0.5 | vni=${47}
+| ... | encap-vrf-id=${0}
+| &{vxlan_settings_ipv6}= | src=10::10 | dst=10::11 | vni=${88}
+| ... | encap-vrf-id=${0}
+
+*** Settings ***
+| Resource | resources/libraries/robot/shared/default.robot
+| Resource | resources/libraries/robot/honeycomb/honeycomb.robot
+| Resource | resources/libraries/robot/honeycomb/interfaces.robot
+| Resource | resources/libraries/robot/honeycomb/vxlan.robot
+# import additional VxLAN settings from resource file
+| Variables | resources/test_data/honeycomb/vxlan.py
+| ...
+| Force Tags | HC_FUNC
+| ...
+| Suite Setup | Set Up Honeycomb Functional Test Suite | ${node}
+| ...
+| Suite Teardown | Tear Down Honeycomb Functional Test Suite | ${node}
+| ...
+| Documentation | *Honeycomb VxLAN management test suite.*
+
+*** Test Cases ***
+| TC01: Honeycomb configures VxLAN tunnel
+| | [Documentation] | Check if Honeycomb API can configure VxLAN settings.
+| | ...
+| | Given VxLAN Operational Data From Honeycomb Should Be empty
+| | ... | ${node} | ${vx_interface}
+| | And VxLAN Operational Data From VAT Should Be empty | ${node}
+| | When Honeycomb sets interface VxLAN configuration
+| | ... | ${node} | ${vx_interface} | ${vxlan_settings}
+| | Then VxLAN Operational Data From Honeycomb Should Be
+| | ... | ${node} | ${vx_interface} | ${vxlan_settings}
+| | And VxLAN Operational Data From VAT Should Be
+| | ... | ${node} | ${vxlan_settings}
+| | ${vxlan_index}= | Get interface index from oper data
+| | ... | ${node} | ${vx_interface}
+| | Set Suite Variable | ${vxlan_index}
+
+| TC02: Honeycomb disables VxLAN tunnel
+| | [Documentation] | Check if Honeycomb API can reset VxLAN configuration.
+| | ...
+| | Given VxLAN Operational Data From Honeycomb Should Be
+| | ... | ${node} | ${vx_interface} | ${vxlan_settings}
+| | And Honeycomb should not show disabled interface in oper data
+| | ... | ${node} | ${vxlan_index}
+| | And VxLAN Operational Data From VAT Should Be
+| | ... | ${node} | ${vxlan_settings}
+| | When Honeycomb removes VxLAN tunnel settings | ${node} | ${vx_interface}
+| | Then VxLAN Operational Data From Honeycomb Should Be empty
+| | ... | ${node} | ${vx_interface}
+| | And Honeycomb should show disabled interface in oper data
+| | ... | ${node} | ${vxlan_index}
+| | And VxLAN Operational Data From VAT Should Be empty | ${node}
+
+| TC03: Honeycomb can configure VXLAN tunnel after one has been disabled
+| | [Documentation] | Check if Honeycomb API can configure VxLAN settings again\
+| | ... | after previous settings have been removed.
+| | ...
+| | [Teardown] | Honeycomb removes VxLAN tunnel settings
+| | ... | ${node} | ${vx_interface}
+| | ...
+| | Given VxLAN Operational Data From Honeycomb Should Be empty
+| | ... | ${node} | ${vx_interface}
+| | And Honeycomb should show disabled interface in oper data
+| | ... | ${node} | ${vxlan_index}
+| | And VxLAN Operational Data From VAT Should Be empty | ${node}
+| | When Honeycomb sets interface VxLAN configuration
+| | ... | ${node} | ${vx_interface} | ${vxlan_settings2}
+| | Then VxLAN Operational Data From Honeycomb Should Be
+| | ... | ${node} | ${vx_interface} | ${vxlan_settings2}
+| | And Honeycomb should not show disabled interface in oper data
+| | ... | ${node} | ${vxlan_index}
+| | And VxLAN Operational Data From VAT Should Be
+| | ... | ${node} | ${vxlan_settings2}
+
+| TC04: Honeycomb does not set VxLAN configuration on another interface type
+| | [Documentation] | Check if Honeycomb API prevents setting VxLAN\
+| | ... | on incorrect interface.
+| | ...
+| | Given VxLAN Operational Data From Honeycomb Should Be empty
+| | ... | ${node} | ${interface}
+| | And VxLAN Operational Data From VAT Should Be empty | ${node}
+| | When Honeycomb fails setting VxLan on different interface type
+| | ... | ${node} | ${interface} | ${vxlan_settings2}
+| | Then VxLAN Operational Data From Honeycomb Should Be empty
+| | ... | ${node} | ${interface}
+| | And VxLAN Operational Data From VAT Should Be empty
+| | ... | ${node}
+
+| TC05: Honeycomb does not set invalid VxLAN configuration
+| | [Documentation] | Check if Honeycomb API prevents setting incorrect VxLAN\
+| | ... | settings.
+| | ...
+| | Given VxLAN Operational Data From Honeycomb Should Be empty
+| | ... | ${node} | ${vx_interface}
+| | And VxLAN Operational Data From VAT Should Be empty | ${node}
+| | When Honeycomb fails setting invalid VxLAN configuration
+| | ... | ${node} | ${vx_interface} | ${vxlan_invalid}
+| | Then VxLAN Operational Data From Honeycomb Should Be empty
+| | ... | ${node} | ${vx_interface}
+
+| TC06: Honeycomb configures VxLAN tunnel with ipv6
+| | [Documentation] | Check if Honeycomb API can configure VxLAN with\
+| | ... | ipv6 settings.
+| | ...
+| | [Teardown] | Honeycomb removes VxLAN tunnel settings
+| | ... | ${node} | ${vx_interface}
+| | ...
+| | Given VxLAN Operational Data From Honeycomb Should Be empty
+| | ... | ${node} | ${vx_interface}
+| | And VxLAN Operational Data From VAT Should Be empty | ${node}
+| | When Honeycomb sets interface VxLAN configuration
+| | ... | ${node} | ${vx_interface} | ${vxlan_settings_ipv6}
+| | Then VxLAN Operational Data From Honeycomb Should Be
+| | ... | ${node} | ${vx_interface} | ${vxlan_settings_ipv6}
+| | And VxLAN Operational Data From VAT Should Be
+| | ... | ${node} | ${vxlan_settings_ipv6}