CSIT-870 Kubernetes/Ligato integration

- Update overall Kubernetes/Ligato integration - CSIT-871 Update infrastructure / images - CSIT-872 Update of KubernetesUtils.py Change-Id: I7833f56abd351c694d3d3e1c9c45e649aec892e1 Signed-off-by: Peter Mikus <pmikus@cisco.com>
author: Peter Mikus <pmikus@cisco.com> 2017-12-05 14:44:32 +0100
committer: Peter Mikus <pmikus@cisco.com> 2018-01-02 19:35:55 +0000
commit: 0437095f4bf958154f25a3f163f432b22fcdc743 (patch)
tree: 871a2170379e66dcb34b087dade9afcb9a74dd93 /tests/kubernetes/perf/container_memif
parent: d7cf0a829cc9cc63799330b673c8c42393de2655 (diff)
10 files changed, 2051 insertions, 126 deletions
diff --git a/tests/kubernetes/perf/container_memif/10ge2p1x520-eth-1drcl2bdbasemaclrn-eth-4memif-2drcl2xc-k8s-ndrpdrdisc.robot b/tests/kubernetes/perf/container_memif/10ge2p1x520-ch-eth-1drcl2bdbasemaclrn-eth-4memif-2drcl2xc-k8s-ndrpdrdisc.robot
index ace97fe2cc..2f5ee13f8d 100644
--- a/tests/kubernetes/perf/container_memif/10ge2p1x520-eth-1drcl2bdbasemaclrn-eth-4memif-2drcl2xc-k8s-ndrpdrdisc.robot
+++ b/tests/kubernetes/perf/container_memif/10ge2p1x520-ch-eth-1drcl2bdbasemaclrn-eth-4memif-2drcl2xc-k8s-ndrpdrdisc.robot
@@ -16,21 +16,16 @@
 | ...
 | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDRDISC
 | ... | NIC_Intel-X520-DA2 | ETH | L2BDMACLRN | L2BDBASE | SCALE | MEMIF
-| ... | K8S | 1VSWITCH | 2VNF | VPP_AGENT | SFC_CONTROLLER
+| ... | K8S | 1VSWITCH | 2VNF | VPP_AGENT | SFC_CONTROLLER | CHAIN
 | ...
 | Suite Setup | Set up 3-node performance topology with DUT's NIC model
 | ... | L2 | Intel-X520-DA2
 | ...
-| Test Setup | Run Keywords
-| ... | Apply Kubernetes resource on all duts | ${nodes} | kafka.yaml
-| ... | AND | Apply Kubernetes resource on all duts | ${nodes} | etcd.yaml
+| Test Setup | Set up performance test with Ligato Kubernetes
 | ...
 | Suite Teardown | Tear down 3-node performance topology
 | ...
-| Test Teardown | Run Keywords
-| ... | Get Kubernetes logs on all DUTs | ${nodes} | AND
-| ... | Describe Kubernetes resource on all DUTs | ${nodes} | AND
-| ... | Delete Kubernetes resource on all duts | ${nodes}
+| Test Teardown | Tear down performance test with Ligato Kubernetes
 | ...
 | Documentation | *RFC2544: Pkt throughput L2BD test cases*
 | ...
@@ -61,14 +56,14 @@
 | ${avg_imix_framesize}= | ${357.833}
 # X520-DA2 bandwidth limit
 | ${s_limit} | ${10000000000}
-# Kubernetes profile
-| ${kubernetes_profile} | eth-1drcl2bdbasemaclrn-eth-4memif-2drcl2xc
+# SFC profile
+| ${sfc_profile} | configmaps/ch-eth-1drcl2bdbasemaclrn-eth-4memif-2drcl2xc
 # Traffic profile:
 | ${traffic_profile} | trex-sl-3n-ethip4-ip4src254
 # CPU settings
 | ${system_cpus}= | ${1}
 | ${vswitch_cpus}= | ${5}
-| ${vnf_cpus}= | ${3}
+| ${vnf_cpus}= | ${2}
 
 *** Keywords ***
 | Create Kubernetes VSWITCH startup config on all DUTs
@@ -143,21 +138,30 @@
 | | ... | ${wt} | ${rxq}
 | | Create Kubernetes VNF'1' startup config on all DUTs
 | | Create Kubernetes VNF'2' startup config on all DUTs
-| | Create Kubernetes CM from file on all DUTs | ${nodes} | name=vswitch-vpp-cfg
-| | ... | key=vpp.conf | src_file=/tmp/vswitch.conf
-| | Create Kubernetes CM from file on all DUTs | ${nodes} | name=vnf1-vpp-cfg
-| | ... | key=vpp.conf | src_file=/tmp/vnf1.conf
-| | Create Kubernetes CM from file on all DUTs | ${nodes} | name=vnf2-vpp-cfg
-| | ... | key=vpp.conf | src_file=/tmp/vnf2.conf
+| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit
+| | ... | name=vswitch-vpp-cfg | vpp.conf=/tmp/vswitch.conf
+| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit
+| | ... | name=vnf1-vpp-cfg | vpp.conf=/tmp/vnf1.conf
+| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit
+| | ... | name=vnf2-vpp-cfg | vpp.conf=/tmp/vnf2.conf
 | | Apply Kubernetes resource on node | ${dut1}
-| | ... | ${kubernetes_profile}.yaml | $$TEST_NAME$$=${TEST NAME}
+| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf1
+| | Apply Kubernetes resource on node | ${dut2}
+| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf1
+| | Apply Kubernetes resource on node | ${dut1}
+| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf2
+| | Apply Kubernetes resource on node | ${dut2}
+| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf2
+| | Apply Kubernetes resource on node | ${dut1}
+| | ... | ${sfc_profile}.yaml | $$TEST_NAME$$=${TEST NAME}
 | | ... | $$VSWITCH_IF1$$=${dut1_if1_name}
 | | ... | $$VSWITCH_IF2$$=${dut1_if2_name}
 | | Apply Kubernetes resource on node | ${dut2}
-| | ... | ${kubernetes_profile}.yaml | $$TEST_NAME$$=${TEST NAME}
+| | ... | ${sfc_profile}.yaml | $$TEST_NAME$$=${TEST NAME}
 | | ... | $$VSWITCH_IF1$$=${dut2_if1_name}
 | | ... | $$VSWITCH_IF2$$=${dut2_if2_name}
-| | Wait for Kubernetes PODs on all DUTs | ${nodes}
+| | Wait for Kubernetes PODs on all DUTs | ${nodes} | csit
+| | Set Kubernetes PODs affinity on all DUTs | ${nodes}
 | | Run Keyword If | '${search_type}' == 'NDR'
 | | ... | Find NDR using binary search and pps
 | | ... | ${framesize} | ${binary_min} | ${binary_max} | ${traffic_profile}
@@ -169,7 +173,7 @@
 | | ... | ${perf_pdr_loss_acceptance} | ${perf_pdr_loss_acceptance_type}
 
 *** Test Cases ***
-| tc01-64B-1t1c-eth-1drcl2bdbasemaclrn-eth-4memif-2drcl2xc-k8s-ndrdisc
+| tc01-64B-1t1c-ch-eth-1drcl2bdbasemaclrn-eth-4memif-2drcl2xc-k8s-ndrdisc
 | | [Documentation]
 | | ... | [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core,\
 | | ... | 1 receive queue per NIC port.
@@ -180,7 +184,7 @@
 | | [Template] | L2 Bridge Domain Binary Search
 | | framesize=${64} | min_rate=${100000} | wt=1 | rxq=1 | search_type=NDR
 
-| tc02-64B-1t1c-eth-1drcl2bdbasemaclrn-eth-4memif-2drcl2xc-k8s-pdrdisc
+| tc02-64B-1t1c-ch-eth-1drcl2bdbasemaclrn-eth-4memif-2drcl2xc-k8s-pdrdisc
 | | [Documentation]
 | | ... | [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core,\
 | | ... | 1 receive queue per NIC port.
@@ -191,7 +195,7 @@
 | | [Template] | L2 Bridge Domain Binary Search
 | | framesize=${64} | min_rate=${100000} | wt=1 | rxq=1 | search_type=PDR
 
-| tc03-IMIX-1t1c-eth-1drcl2bdbasemaclrn-eth-4memif-2drcl2xc-k8s-ndrdisc
+| tc03-IMIX-1t1c-ch-eth-1drcl2bdbasemaclrn-eth-4memif-2drcl2xc-k8s-ndrdisc
 | | [Documentation]
 | | ... | [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core,\
 | | ... | 1 receive queue per NIC port.
@@ -203,7 +207,7 @@
 | | [Template] | L2 Bridge Domain Binary Search
 | | framesize=IMIX_v4_1 | min_rate=${10000} | wt=1 | rxq=1 | search_type=NDR
 
-| tc04-IMIX-1t1c-eth-1drcl2bdbasemaclrn-eth-4memif-2drcl2xc-k8s-pdrdisc
+| tc04-IMIX-1t1c-ch-eth-1drcl2bdbasemaclrn-eth-4memif-2drcl2xc-k8s-pdrdisc
 | | [Documentation]
 | | ... | [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core,\
 | | ... | 1 receive queue per NIC port.
@@ -215,7 +219,7 @@
 | | [Template] | L2 Bridge Domain Binary Search
 | | framesize=IMIX_v4_1 | min_rate=${10000} | wt=1 | rxq=1 | search_type=PDR
 
-| tc05-1518B-1t1c-eth-1drcl2bdbasemaclrn-eth-4memif-2drcl2xc-k8s-ndrdisc
+| tc05-1518B-1t1c-ch-eth-1drcl2bdbasemaclrn-eth-4memif-2drcl2xc-k8s-ndrdisc
 | | [Documentation]
 | | ... | [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core,\
 | | ... | 1 receive queue per NIC port.
@@ -226,7 +230,7 @@
 | | [Template] | L2 Bridge Domain Binary Search
 | | framesize=${1518} | min_rate=${10000} | wt=1 | rxq=1 | search_type=NDR
 
-| tc06-1518B-1t1c-eth-1drcl2bdbasemaclrn-eth-4memif-2drcl2xc-k8s-pdrdisc
+| tc06-1518B-1t1c-ch-eth-1drcl2bdbasemaclrn-eth-4memif-2drcl2xc-k8s-pdrdisc
 | | [Documentation]
 | | ... | [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core,\
 | | ... | 1 receive queue per NIC port.
@@ -237,7 +241,7 @@
 | | [Template] | L2 Bridge Domain Binary Search
 | | framesize=${1518} | min_rate=${10000} | wt=1 | rxq=1 | search_type=PDR
 
-| tc07-64B-2t2c-eth-1drcl2bdbasemaclrn-eth-4memif-2drcl2xc-k8s-ndrdisc
+| tc07-64B-2t2c-ch-eth-1drcl2bdbasemaclrn-eth-4memif-2drcl2xc-k8s-ndrdisc
 | | [Documentation]
 | | ... | [Cfg] DUT runs L2BD switching config with 2 thread, 2 phy core,\
 | | ... | 1 receive queue per NIC port.
@@ -248,7 +252,7 @@
 | | [Template] | L2 Bridge Domain Binary Search
 | | framesize=${64} | min_rate=${100000} | wt=2 | rxq=1 | search_type=NDR
 
-| tc08-64B-2t2c-eth-1drcl2bdbasemaclrn-eth-4memif-2drcl2xc-k8s-pdrdisc
+| tc08-64B-2t2c-ch-eth-1drcl2bdbasemaclrn-eth-4memif-2drcl2xc-k8s-pdrdisc
 | | [Documentation]
 | | ... | [Cfg] DUT runs L2BD switching config with 2 thread, 2 phy core,\
 | | ... | 1 receive queue per NIC port.
@@ -259,7 +263,7 @@
 | | [Template] | L2 Bridge Domain Binary Search
 | | framesize=${64} | min_rate=${100000} | wt=2 | rxq=1 | search_type=PDR
 
-| tc09-IMIX-2t2c-eth-1drcl2bdbasemaclrn-eth-4memif-2drcl2xc-k8s-ndrdisc
+| tc09-IMIX-2t2c-ch-eth-1drcl2bdbasemaclrn-eth-4memif-2drcl2xc-k8s-ndrdisc
 | | [Documentation]
 | | ... | [Cfg] DUT runs L2BD switching config with 2 thread, 2 phy core,\
 | | ... | 1 receive queue per NIC port.
@@ -271,7 +275,7 @@
 | | [Template] | L2 Bridge Domain Binary Search
 | | framesize=IMIX_v4_1 | min_rate=${10000} | wt=2 | rxq=1 | search_type=NDR
 
-| tc10-IMIX-2t2c-eth-1drcl2bdbasemaclrn-eth-4memif-2drcl2xc-k8s-pdrdisc
+| tc10-IMIX-2t2c-ch-eth-1drcl2bdbasemaclrn-eth-4memif-2drcl2xc-k8s-pdrdisc
 | | [Documentation]
 | | ... | [Cfg] DUT runs L2BD switching config with 2 thread, 1 phy core,\
 | | ... | 1 receive queue per NIC port.
@@ -283,7 +287,7 @@
 | | [Template] | L2 Bridge Domain Binary Search
 | | framesize=IMIX_v4_1 | min_rate=${10000} | wt=2 | rxq=1 | search_type=PDR
 
-| tc11-1518B-2t2c-eth-1drcl2bdbasemaclrn-eth-4memif-2drcl2xc-k8s-ndrdisc
+| tc11-1518B-2t2c-ch-eth-1drcl2bdbasemaclrn-eth-4memif-2drcl2xc-k8s-ndrdisc
 | | [Documentation]
 | | ... | [Cfg] DUT runs L2BD switching config with 2 thread, 1 phy core,\
 | | ... | 1 receive queue per NIC port.
@@ -294,7 +298,7 @@
 | | [Template] | L2 Bridge Domain Binary Search
 | | framesize=${1518} | min_rate=${10000} | wt=2 | rxq=1 | search_type=NDR
 
-| tc12-1518B-2t2c-eth-1drcl2bdbasemaclrn-eth-4memif-2drcl2xc-k8s-pdrdisc
+| tc12-1518B-2t2c-ch-eth-1drcl2bdbasemaclrn-eth-4memif-2drcl2xc-k8s-pdrdisc
 | | [Documentation]
 | | ... | [Cfg] DUT runs L2BD switching config with 2 thread, 1 phy core,\
 | | ... | 1 receive queue per NIC port.
diff --git a/tests/kubernetes/perf/container_memif/10ge2p1x520-ch-eth-1drcl2bdbasemaclrn-eth-8memif-4drcl2xc-k8s-ndrpdrdisc.robot b/tests/kubernetes/perf/container_memif/10ge2p1x520-ch-eth-1drcl2bdbasemaclrn-eth-8memif-4drcl2xc-k8s-ndrpdrdisc.robot
new file mode 100644
index 0000000000..f8cfac7260
--- /dev/null
+++ b/tests/kubernetes/perf/container_memif/10ge2p1x520-ch-eth-1drcl2bdbasemaclrn-eth-8memif-4drcl2xc-k8s-ndrpdrdisc.robot
@@ -0,0 +1,324 @@
+# Copyright (c) 2017 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/performance/performance_setup.robot
+| ...
+| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDRDISC
+| ... | NIC_Intel-X520-DA2 | ETH | L2BDMACLRN | L2BDBASE | SCALE | MEMIF
+| ... | K8S | 1VSWITCH | 4VNF | VPP_AGENT | SFC_CONTROLLER | CHAIN
+| ...
+| Suite Setup | Set up 3-node performance topology with DUT's NIC model
+| ... | L2 | Intel-X520-DA2
+| ...
+| Test Setup | Set up performance test with Ligato Kubernetes
+| ...
+| Suite Teardown | Tear down 3-node performance topology
+| ...
+| Test Teardown | Tear down performance test with Ligato Kubernetes
+| ...
+| Documentation | *RFC2544: Pkt throughput L2BD test cases*
+| ...
+| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
+| ... | with single links between nodes.
+| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
+| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with two L2
+| ... | bridge domains and MAC learning enabled. DUT1 and DUT2 tested with
+| ... | 2p10GE NIC X520 Niantic by Intel.
+| ... | VNF Containers are connected to VSWITCH container via Memif interface.
+| ... | All containers are running same VPP version. Containers are deployed
+| ... | with Kubernetes. Configuration is applied by vnf-agent.
+| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop
+| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop
+| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage
+| ... | of packets transmitted. NDR and PDR are discovered for different
+| ... | Ethernet L2 frame sizes using either binary search or linear search
+| ... | algorithms with configured starting rate and final step that determines
+| ... | throughput measurement resolution. Test packets are generated by TG on
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups
+| ... | (flow-group per direction, 253 flows per flow-group) with all packets
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static
+| ... | payload. MAC addresses are matching MAC addresses of the TG node
+| ... | interfaces.
+| ... | *[Ref] Applicable standard specifications:* RFC2544.
+
+*** Variables ***
+| ${avg_imix_framesize}= | ${357.833}
+# X520-DA2 bandwidth limit
+| ${s_limit} | ${10000000000}
+# SFC profile
+| ${sfc_profile} | configmaps/ch-eth-1drcl2bdbasemaclrn-eth-8memif-4drcl2xc
+# Traffic profile:
+| ${traffic_profile} | trex-sl-3n-ethip4-ip4src254
+# CPU settings
+| ${system_cpus}= | ${1}
+| ${vswitch_cpus}= | ${5}
+| ${vnf_cpus}= | ${2}
+
+*** Keywords ***
+| Create Kubernetes VSWITCH startup config on all DUTs
+| | [Documentation] | Create base startup configuration of VSWITCH in Kubernetes
+| | ... | deploy to all DUTs.
+| | ...
+| | ... | *Arguments:*
+| | ... | - ${framesize} - L2 framesize. Type: integer
+| | ... | - ${wt} - Worker threads. Type: integer
+| | ... | - ${rxq} - RX queues. Type: integer
+| | ...
+| | ... | *Example:*
+| | ...
+| | ... | \| Create Kubernetes VSWITCH startup config on all DUTs \| ${64} \
+| | ... | \| ${1} \| ${1}
+| | ...
+| | [Arguments] | ${framesize} | ${wt} | ${rxq}
+| | ${dut1_numa}= | Get interfaces numa node | ${dut1}
+| | ... | ${dut1_if1} | ${dut1_if2}
+| | ${dut2_numa}= | Get interfaces numa node | ${dut2}
+| | ... | ${dut2_if1} | ${dut2_if2}
+| | ${dut1_if1_pci}= | Get Interface PCI Addr | ${dut1} | ${dut1_if1}
+| | ${dut1_if2_pci}= | Get Interface PCI Addr | ${dut1} | ${dut1_if2}
+| | ${dut2_if1_pci}= | Get Interface PCI Addr | ${dut2} | ${dut2_if1}
+| | ${dut2_if2_pci}= | Get Interface PCI Addr | ${dut2} | ${dut2_if2}
+| | ${cpu_cnt}= | Evaluate | ${wt}+1
+| | ${config}= | Run keyword | Create Kubernetes VSWITCH startup config
+| | ... | node=${dut1} | cpu_cnt=${cpu_cnt} | cpu_node=${dut1_numa}
+| | ... | cpu_skip=${system_cpus} | smt_used=${False}
+| | ... | filename=/tmp/vswitch.conf | framesize=${framesize} | rxq=${rxq}
+| | ... | if1=${dut1_if1_pci} | if2=${dut1_if2_pci}
+| | ${config}= | Run keyword | Create Kubernetes VSWITCH startup config
+| | ... | node=${dut2} | cpu_cnt=${cpu_cnt} | cpu_node=${dut2_numa}
+| | ... | cpu_skip=${system_cpus} | smt_used=${False}
+| | ... | filename=/tmp/vswitch.conf | framesize=${framesize} | rxq=${rxq}
+| | ... | if1=${dut2_if1_pci} | if2=${dut2_if2_pci}
+
+| Create Kubernetes VNF'${i}' startup config on all DUTs
+| | [Documentation] | Create base startup configuration of VNF in Kubernetes
+| | ... | deploy to all DUTs.
+| | ...
+| | ${i_int}= | Convert To Integer | ${i}
+| | ${cpu_skip}= | Evaluate | ${vswitch_cpus}+${system_cpus}
+| | ${dut1_numa}= | Get interfaces numa node | ${dut1}
+| | ... | ${dut1_if1} | ${dut1_if2}
+| | ${dut2_numa}= | Get interfaces numa node | ${dut2}
+| | ... | ${dut2_if1} | ${dut2_if2}
+| | ${config}= | Run keyword | Create Kubernetes VNF startup config
+| | ... | node=${dut1} | cpu_cnt=${vnf_cpus} | cpu_node=${dut1_numa}
+| | ... | cpu_skip=${cpu_skip} | smt_used=${False} | filename=/tmp/vnf${i}.conf
+| | ... | i=${i_int}
+| | ${config}= | Run keyword | Create Kubernetes VNF startup config
+| | ... | node=${dut2} | cpu_cnt=${vnf_cpus} | cpu_node=${dut2_numa}
+| | ... | cpu_skip=${cpu_skip} | smt_used=${False} | filename=/tmp/vnf${i}.conf
+| | ... | i=${i_int}
+
+| L2 Bridge Domain Binary Search
+| | [Arguments] | ${framesize} | ${min_rate} | ${wt} | ${rxq} | ${search_type}
+| | Set Test Variable | ${framesize}
+| | Set Test Variable | ${min_rate}
+| | ${get_framesize}= | Set Variable If
+| | ... | "${framesize}" == "IMIX_v4_1" | ${avg_imix_framesize} | ${framesize}
+| | ${max_rate}= | Calculate pps | ${s_limit} | ${get_framesize}
+| | ${binary_min}= | Set Variable | ${min_rate}
+| | ${binary_max}= | Set Variable | ${max_rate}
+| | ${threshold}= | Set Variable | ${min_rate}
+| | ${dut1_if1_name}= | Get interface name | ${dut1} | ${dut1_if1}
+| | ${dut1_if2_name}= | Get interface name | ${dut1} | ${dut1_if2}
+| | ${dut2_if1_name}= | Get interface name | ${dut2} | ${dut2_if1}
+| | ${dut2_if2_name}= | Get interface name | ${dut2} | ${dut2_if2}
+| | Create Kubernetes VSWITCH startup config on all DUTs | ${get_framesize}
+| | ... | ${wt} | ${rxq}
+| | Create Kubernetes VNF'1' startup config on all DUTs
+| | Create Kubernetes VNF'2' startup config on all DUTs
+| | Create Kubernetes VNF'3' startup config on all DUTs
+| | Create Kubernetes VNF'4' startup config on all DUTs
+| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit
+| | ... | name=vswitch-vpp-cfg | vpp.conf=/tmp/vswitch.conf
+| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit
+| | ... | name=vnf1-vpp-cfg | vpp.conf=/tmp/vnf1.conf
+| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit
+| | ... | name=vnf2-vpp-cfg | vpp.conf=/tmp/vnf2.conf
+| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit
+| | ... | name=vnf3-vpp-cfg | vpp.conf=/tmp/vnf3.conf
+| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit
+| | ... | name=vnf4-vpp-cfg | vpp.conf=/tmp/vnf4.conf
+| | Apply Kubernetes resource on node | ${dut1}
+| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf1
+| | Apply Kubernetes resource on node | ${dut2}
+| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf1
+| | Apply Kubernetes resource on node | ${dut1}
+| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf2
+| | Apply Kubernetes resource on node | ${dut2}
+| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf2
+| | Apply Kubernetes resource on node | ${dut1}
+| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf3
+| | Apply Kubernetes resource on node | ${dut2}
+| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf3
+| | Apply Kubernetes resource on node | ${dut1}
+| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf4
+| | Apply Kubernetes resource on node | ${dut2}
+| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf4
+| | Apply Kubernetes resource on node | ${dut1}
+| | ... | ${sfc_profile}.yaml | $$TEST_NAME$$=${TEST NAME}
+| | ... | $$VSWITCH_IF1$$=${dut1_if1_name}
+| | ... | $$VSWITCH_IF2$$=${dut1_if2_name}
+| | Apply Kubernetes resource on node | ${dut2}
+| | ... | ${sfc_profile}.yaml | $$TEST_NAME$$=${TEST NAME}
+| | ... | $$VSWITCH_IF1$$=${dut2_if1_name}
+| | ... | $$VSWITCH_IF2$$=${dut2_if2_name}
+| | Wait for Kubernetes PODs on all DUTs | ${nodes} | csit
+| | Set Kubernetes PODs affinity on all DUTs | ${nodes}
+| | Run Keyword If | '${search_type}' == 'NDR'
+| | ... | Find NDR using binary search and pps
+| | ... | ${framesize} | ${binary_min} | ${binary_max} | ${traffic_profile}
+| | ... | ${min_rate} | ${max_rate} | ${threshold}
+| | ... | ELSE IF | '${search_type}' == 'PDR'
+| | ... | Find PDR using binary search and pps
+| | ... | ${framesize} | ${binary_min} | ${binary_max} | ${traffic_profile}
+| | ... | ${min_rate} | ${max_rate} | ${threshold}
+| | ... | ${perf_pdr_loss_acceptance} | ${perf_pdr_loss_acceptance_type}
+
+*** Test Cases ***
+| tc01-64B-1t1c-ch-eth-1drcl2bdbasemaclrn-eth-8memif-4drcl2xc-k8s-ndrdisc
+| | [Documentation]
+| | ... | [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core,\
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\
+| | ... | linerate, step 100kpps.
+| | ...
+| | [Tags] | 64B | 1T1C | STHREAD | NDRDISC
+| | [Template] | L2 Bridge Domain Binary Search
+| | framesize=${64} | min_rate=${100000} | wt=1 | rxq=1 | search_type=NDR
+
+| tc02-64B-1t1c-ch-eth-1drcl2bdbasemaclrn-eth-8memif-4drcl2xc-k8s-pdrdisc
+| | [Documentation]
+| | ... | [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core,\
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\
+| | ... | linerate, step 100kpps, LT=0.5%.
+| | ...
+| | [Tags] | 64B | 1T1C | STHREAD | PDRDISC | SKIP_PATCH
+| | [Template] | L2 Bridge Domain Binary Search
+| | framesize=${64} | min_rate=${100000} | wt=1 | rxq=1 | search_type=PDR
+
+| tc03-IMIX-1t1c-ch-eth-1drcl2bdbasemaclrn-eth-8memif-4drcl2xc-k8s-ndrdisc
+| | [Documentation]
+| | ... | [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core,\
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Find NDR for IMIX_v4_1 frames using binary search start at 10GE\
+| | ... | linerate, step 10kpps.
+| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B)
+| | ...
+| | [Tags] | IMIX | 1T1C | STHREAD | NDRDISC
+| | [Template] | L2 Bridge Domain Binary Search
+| | framesize=IMIX_v4_1 | min_rate=${10000} | wt=1 | rxq=1 | search_type=NDR
+
+| tc04-IMIX-1t1c-ch-eth-1drcl2bdbasemaclrn-eth-8memif-4drcl2xc-k8s-pdrdisc
+| | [Documentation]
+| | ... | [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core,\
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Find PDR for IMIX_v4_1 frames using binary search start at 10GE\
+| | ... | linerate, step 10kpps, LT=0.5%.
+| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B)
+| | ...
+| | [Tags] | IMIX | 1T1C | STHREAD | PDRDISC | SKIP_PATCH
+| | [Template] | L2 Bridge Domain Binary Search
+| | framesize=IMIX_v4_1 | min_rate=${10000} | wt=1 | rxq=1 | search_type=PDR
+
+| tc05-1518B-1t1c-ch-eth-1drcl2bdbasemaclrn-eth-8memif-4drcl2xc-k8s-ndrdisc
+| | [Documentation]
+| | ... | [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core,\
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\
+| | ... | linerate, step 10kpps.
+| | ...
+| | [Tags] | 1518B | 1T1C | STHREAD | NDRDISC
+| | [Template] | L2 Bridge Domain Binary Search
+| | framesize=${1518} | min_rate=${10000} | wt=1 | rxq=1 | search_type=NDR
+
+| tc06-1518B-1t1c-ch-eth-1drcl2bdbasemaclrn-eth-8memif-4drcl2xc-k8s-pdrdisc
+| | [Documentation]
+| | ... | [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core,\
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\
+| | ... | linerate, step 10kpps, LT=0.5%.
+| | ...
+| | [Tags] | 1518B | 1T1C | STHREAD | PDRDISC | SKIP_PATCH
+| | [Template] | L2 Bridge Domain Binary Search
+| | framesize=${1518} | min_rate=${10000} | wt=1 | rxq=1 | search_type=PDR
+
+| tc07-64B-2t2c-ch-eth-1drcl2bdbasemaclrn-eth-8memif-4drcl2xc-k8s-ndrdisc
+| | [Documentation]
+| | ... | [Cfg] DUT runs L2BD switching config with 2 thread, 2 phy core,\
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\
+| | ... | linerate, step 100kpps.
+| | ...
+| | [Tags] | 64B | 2T2C | MTHREAD | NDRDISC
+| | [Template] | L2 Bridge Domain Binary Search
+| | framesize=${64} | min_rate=${100000} | wt=2 | rxq=1 | search_type=NDR
+
+| tc08-64B-2t2c-ch-eth-1drcl2bdbasemaclrn-eth-8memif-4drcl2xc-k8s-pdrdisc
+| | [Documentation]
+| | ... | [Cfg] DUT runs L2BD switching config with 2 thread, 2 phy core,\
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\
+| | ... | linerate, step 100kpps, LT=0.5%.
+| | ...
+| | [Tags] | 64B | 2T2C | MTHREAD | PDRDISC | SKIP_PATCH
+| | [Template] | L2 Bridge Domain Binary Search
+| | framesize=${64} | min_rate=${100000} | wt=2 | rxq=1 | search_type=PDR
+
+| tc09-IMIX-2t2c-ch-eth-1drcl2bdbasemaclrn-eth-8memif-4drcl2xc-k8s-ndrdisc
+| | [Documentation]
+| | ... | [Cfg] DUT runs L2BD switching config with 2 thread, 2 phy core,\
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Find NDR for IMIX_v4_1 frames using binary search start at 10GE\
+| | ... | linerate, step 10kpps.
+| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B)
+| | ...
+| | [Tags] | IMIX | 2T2C | MTHREAD | NDRDISC | SKIP_PATCH
+| | [Template] | L2 Bridge Domain Binary Search
+| | framesize=IMIX_v4_1 | min_rate=${10000} | wt=2 | rxq=1 | search_type=NDR
+
+| tc10-IMIX-2t2c-ch-eth-1drcl2bdbasemaclrn-eth-8memif-4drcl2xc-k8s-pdrdisc
+| | [Documentation]
+| | ... | [Cfg] DUT runs L2BD switching config with 2 thread, 1 phy core,\
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Find PDR for IMIX_v4_1 frames using binary search start at 10GE\
+| | ... | linerate, step 10kpps, LT=0.5%.
+| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B)
+| | ...
+| | [Tags] | IMIX | 2T2C | MTHREAD | PDRDISC | SKIP_PATCH
+| | [Template] | L2 Bridge Domain Binary Search
+| | framesize=IMIX_v4_1 | min_rate=${10000} | wt=2 | rxq=1 | search_type=PDR
+
+| tc11-1518B-2t2c-ch-eth-1drcl2bdbasemaclrn-eth-8memif-4drcl2xc-k8s-ndrdisc
+| | [Documentation]
+| | ... | [Cfg] DUT runs L2BD switching config with 2 thread, 1 phy core,\
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\
+| | ... | linerate, step 10kpps.
+| | ...
+| | [Tags] | 1518B | 2T2C | MTHREAD | NDRDISC | SKIP_PATCH
+| | [Template] | L2 Bridge Domain Binary Search
+| | framesize=${1518} | min_rate=${10000} | wt=2 | rxq=1 | search_type=NDR
+
+| tc12-1518B-2t2c-ch-eth-1drcl2bdbasemaclrn-eth-8memif-4drcl2xc-k8s-pdrdisc
+| | [Documentation]
+| | ... | [Cfg] DUT runs L2BD switching config with 2 thread, 1 phy core,\
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\
+| | ... | linerate, step 10kpps, LT=0.5%.
+| | ...
+| | [Tags] | 1518B | 2T2C | MTHREAD | PDRDISC | SKIP_PATCH
+| | [Template] | L2 Bridge Domain Binary Search
+| | framesize=${1518} | min_rate=${10000} | wt=2 | rxq=1 | search_type=PDR
diff --git a/tests/kubernetes/perf/container_memif/10ge2p1x520-eth-1drcl2xcbase-eth-4memif-2drcl2xc-k8s-ndrpdrdisc.robot b/tests/kubernetes/perf/container_memif/10ge2p1x520-ch-eth-1drcl2xcbase-eth-4memif-2drcl2xc-k8s-ndrpdrdisc.robot
index e10d21ca3a..62b42a4ea2 100644
--- a/tests/kubernetes/perf/container_memif/10ge2p1x520-eth-1drcl2xcbase-eth-4memif-2drcl2xc-k8s-ndrpdrdisc.robot
+++ b/tests/kubernetes/perf/container_memif/10ge2p1x520-ch-eth-1drcl2xcbase-eth-4memif-2drcl2xc-k8s-ndrpdrdisc.robot
@@ -16,21 +16,16 @@
 | ...
 | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDRDISC
 | ... | NIC_Intel-X520-DA2 | ETH | L2XCFWD | SCALE | L2XCBASE | MEMIF
-| ... | K8S | 1VSWITCH | 2VNF | VPP_AGENT | SFC_CONTROLLER
+| ... | K8S | 1VSWITCH | 2VNF | VPP_AGENT | SFC_CONTROLLER | CHAIN
 | ...
 | Suite Setup | Set up 3-node performance topology with DUT's NIC model
 | ... | L2 | Intel-X520-DA2
 | ...
-| Test Setup | Run Keywords
-| ... | Apply Kubernetes resource on all duts | ${nodes} | kafka.yaml
-| ... | AND | Apply Kubernetes resource on all duts | ${nodes} | etcd.yaml
+| Test Setup | Set up performance test with Ligato Kubernetes
 | ...
 | Suite Teardown | Tear down 3-node performance topology
 | ...
-| Test Teardown | Run Keywords
-| ... | Get Kubernetes logs on all DUTs | ${nodes} | AND
-| ... | Describe Kubernetes resource on all DUTs | ${nodes} | AND
-| ... | Delete Kubernetes resource on all duts | ${nodes}
+| Test Teardown | Tear down performance test with Ligato Kubernetes
 | ...
 | Documentation | *RFC2544: Pkt throughput L2XC test cases*
 | ...
@@ -60,14 +55,14 @@
 | ${avg_imix_framesize}= | ${357.833}
 # X520-DA2 bandwidth limit
 | ${s_limit} | ${10000000000}
-# Kubernetes profile
-| ${kubernetes_profile} | eth-1drcl2xcbase-eth-4memif-2drcl2xc
+# SFC profile
+| ${sfc_profile} | configmaps/ch-eth-1drcl2xcbase-eth-4memif-2drcl2xc
 # Traffic profile:
 | ${traffic_profile} | trex-sl-3n-ethip4-ip4src254
 # CPU settings
 | ${system_cpus}= | ${1}
 | ${vswitch_cpus}= | ${5}
-| ${vnf_cpus}= | ${3}
+| ${vnf_cpus}= | ${2}
 
 *** Keywords ***
 | Create Kubernetes VSWITCH startup config on all DUTs
@@ -142,22 +137,30 @@
 | | ... | ${wt} | ${rxq}
 | | Create Kubernetes VNF'1' startup config on all DUTs
 | | Create Kubernetes VNF'2' startup config on all DUTs
-| | Create Kubernetes CM from file on all DUTs | ${nodes} | name=vswitch-vpp-cfg
-| | ... | key=vpp.conf | src_file=/tmp/vswitch.conf
-| | Create Kubernetes CM from file on all DUTs | ${nodes} | name=vnf1-vpp-cfg
-| | ... | key=vpp.conf | src_file=/tmp/vnf1.conf
-| | Create Kubernetes CM from file on all DUTs | ${nodes} | name=vnf2-vpp-cfg
-| | ... | key=vpp.conf | src_file=/tmp/vnf2.conf
+| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit
+| | ... | name=vswitch-vpp-cfg | vpp.conf=/tmp/vswitch.conf
+| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit
+| | ... | name=vnf1-vpp-cfg | vpp.conf=/tmp/vnf1.conf
+| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit
+| | ... | name=vnf2-vpp-cfg | vpp.conf=/tmp/vnf2.conf
 | | Apply Kubernetes resource on node | ${dut1}
-| | ... | ${kubernetes_profile}.yaml | $$TEST_NAME$$=${TEST NAME}
+| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf1
+| | Apply Kubernetes resource on node | ${dut2}
+| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf1
+| | Apply Kubernetes resource on node | ${dut1}
+| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf2
+| | Apply Kubernetes resource on node | ${dut2}
+| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf2
+| | Apply Kubernetes resource on node | ${dut1}
+| | ... | ${sfc_profile}.yaml | $$TEST_NAME$$=${TEST NAME}
 | | ... | $$VSWITCH_IF1$$=${dut1_if1_name}
 | | ... | $$VSWITCH_IF2$$=${dut1_if2_name}
 | | Apply Kubernetes resource on node | ${dut2}
-| | ... | ${kubernetes_profile}.yaml | $$TEST_NAME$$=${TEST NAME}
+| | ... | ${sfc_profile}.yaml | $$TEST_NAME$$=${TEST NAME}
 | | ... | $$VSWITCH_IF1$$=${dut2_if1_name}
 | | ... | $$VSWITCH_IF2$$=${dut2_if2_name}
-| | Wait for Kubernetes PODs on all DUTs | ${nodes}
-| | Describe Kubernetes resource on all DUTs | ${nodes}
+| | Wait for Kubernetes PODs on all DUTs | ${nodes} | csit
+| | Set Kubernetes PODs affinity on all DUTs | ${nodes}
 | | Run Keyword If | '${search_type}' == 'NDR'
 | | ... | Find NDR using binary search and pps
 | | ... | ${framesize} | ${binary_min} | ${binary_max} | ${traffic_profile}
@@ -169,7 +172,7 @@
 | | ... | ${perf_pdr_loss_acceptance} | ${perf_pdr_loss_acceptance_type}
 
 *** Test Cases ***
-| tc01-64B-1t1c-eth-1drcl2xcbase-eth-4memif-2drcl2xc-k8s-ndrdisc
+| tc01-64B-1t1c-ch-eth-1drcl2xcbase-eth-4memif-2drcl2xc-k8s-ndrdisc
 | | [Documentation]
 | | ... | [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core,\
 | | ... | 1 receive queue per NIC port.
@@ -180,7 +183,7 @@
 | | [Template] | L2 Cross Connect Binary Search
 | | framesize=${64} | min_rate=${100000} | wt=1 | rxq=1 | search_type=NDR
 
-| tc02-64B-1t1c-eth-1drcl2xcbase-eth-4memif-2drcl2xc-k8s-pdrdisc
+| tc02-64B-1t1c-ch-eth-1drcl2xcbase-eth-4memif-2drcl2xc-k8s-pdrdisc
 | | [Documentation]
 | | ... | [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core,\
 | | ... | 1 receive queue per NIC port.
@@ -191,7 +194,7 @@
 | | [Template] | L2 Cross Connect Binary Search
 | | framesize=${64} | min_rate=${100000} | wt=1 | rxq=1 | search_type=PDR
 
-| tc03-IMIX-1t1c-eth-1drcl2xcbase-eth-4memif-2drcl2xc-k8s-ndrdisc
+| tc03-IMIX-1t1c-ch-eth-1drcl2xcbase-eth-4memif-2drcl2xc-k8s-ndrdisc
 | | [Documentation]
 | | ... | [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core,\
 | | ... | 1 receive queue per NIC port.
@@ -203,7 +206,7 @@
 | | [Template] | L2 Cross Connect Binary Search
 | | framesize=IMIX_v4_1 | min_rate=${10000} | wt=1 | rxq=1 | search_type=NDR
 
-| tc04-IMIX-1t1c-eth-1drcl2xcbase-eth-4memif-2drcl2xc-k8s-pdrdisc
+| tc04-IMIX-1t1c-ch-eth-1drcl2xcbase-eth-4memif-2drcl2xc-k8s-pdrdisc
 | | [Documentation]
 | | ... | [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core,\
 | | ... | 1 receive queue per NIC port.
@@ -215,7 +218,7 @@
 | | [Template] | L2 Cross Connect Binary Search
 | | framesize=IMIX_v4_1 | min_rate=${10000} | wt=1 | rxq=1 | search_type=PDR
 
-| tc05-1518B-1t1c-eth-1drcl2xcbase-eth-4memif-2drcl2xc-k8s-ndrdisc
+| tc05-1518B-1t1c-ch-eth-1drcl2xcbase-eth-4memif-2drcl2xc-k8s-ndrdisc
 | | [Documentation]
 | | ... | [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core,\
 | | ... | 1 receive queue per NIC port.
@@ -226,7 +229,7 @@
 | | [Template] | L2 Cross Connect Binary Search
 | | framesize=${1518} | min_rate=${10000} | wt=1 | rxq=1 | search_type=NDR
 
-| tc06-1518B-1t1c-eth-1drcl2xcbase-eth-4memif-2drcl2xc-k8s-pdrdisc
+| tc06-1518B-1t1c-ch-eth-1drcl2xcbase-eth-4memif-2drcl2xc-k8s-pdrdisc
 | | [Documentation]
 | | ... | [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core,\
 | | ... | 1 receive queue per NIC port.
@@ -237,7 +240,7 @@
 | | [Template] | L2 Cross Connect Binary Search
 | | framesize=${1518} | min_rate=${10000} | wt=1 | rxq=1 | search_type=PDR
 
-| tc07-64B-2t2c-eth-1drcl2xcbase-eth-4memif-2drcl2xc-k8s-ndrdisc
+| tc07-64B-2t2c-ch-eth-1drcl2xcbase-eth-4memif-2drcl2xc-k8s-ndrdisc
 | | [Documentation]
 | | ... | [Cfg] DUT runs L2XC switching config with 2 thread, 2 phy core,\
 | | ... | 1 receive queue per NIC port.
@@ -248,7 +251,7 @@
 | | [Template] | L2 Cross Connect Binary Search
 | | framesize=${64} | min_rate=${100000} | wt=2 | rxq=1 | search_type=NDR
 
-| tc08-64B-2t2c-eth-1drcl2xcbase-eth-4memif-2drcl2xc-k8s-pdrdisc
+| tc08-64B-2t2c-ch-eth-1drcl2xcbase-eth-4memif-2drcl2xc-k8s-pdrdisc
 | | [Documentation]
 | | ... | [Cfg] DUT runs L2XC switching config with 2 thread, 2 phy core,\
 | | ... | 1 receive queue per NIC port.
@@ -259,7 +262,7 @@
 | | [Template] | L2 Cross Connect Binary Search
 | | framesize=${64} | min_rate=${100000} | wt=2 | rxq=1 | search_type=PDR
 
-| tc09-IMIX-2t2c-eth-1drcl2xcbase-eth-4memif-2drcl2xc-k8s-ndrdisc
+| tc09-IMIX-2t2c-ch-eth-1drcl2xcbase-eth-4memif-2drcl2xc-k8s-ndrdisc
 | | [Documentation]
 | | ... | [Cfg] DUT runs L2XC switching config with 2 thread, 2 phy core,\
 | | ... | 1 receive queue per NIC port.
@@ -271,7 +274,7 @@
 | | [Template] | L2 Cross Connect Binary Search
 | | framesize=IMIX_v4_1 | min_rate=${10000} | wt=2 | rxq=1 | search_type=NDR
 
-| tc10-IMIX-2t2c-eth-1drcl2xcbase-eth-4memif-2drcl2xc-k8s-pdrdisc
+| tc10-IMIX-2t2c-ch-eth-1drcl2xcbase-eth-4memif-2drcl2xc-k8s-pdrdisc
 | | [Documentation]
 | | ... | [Cfg] DUT runs L2XC switching config with 2 thread, 1 phy core,\
 | | ... | 1 receive queue per NIC port.
@@ -283,7 +286,7 @@
 | | [Template] | L2 Cross Connect Binary Search
 | | framesize=IMIX_v4_1 | min_rate=${10000} | wt=2 | rxq=1 | search_type=PDR
 
-| tc11-1518B-2t2c-eth-1drcl2xcbase-eth-4memif-2drcl2xc-k8s-ndrdisc
+| tc11-1518B-2t2c-ch-eth-1drcl2xcbase-eth-4memif-2drcl2xc-k8s-ndrdisc
 | | [Documentation]
 | | ... | [Cfg] DUT runs L2XC switching config with 2 thread, 1 phy core,\
 | | ... | 1 receive queue per NIC port.
@@ -294,7 +297,7 @@
 | | [Template] | L2 Cross Connect Binary Search
 | | framesize=${1518} | min_rate=${10000} | wt=2 | rxq=1 | search_type=NDR
 
-| tc12-1518B-2t2c-eth-1drcl2xcbase-eth-4memif-2drcl2xc-k8s-pdrdisc
+| tc12-1518B-2t2c-ch-eth-1drcl2xcbase-eth-4memif-2drcl2xc-k8s-pdrdisc
 | | [Documentation]
 | | ... | [Cfg] DUT runs L2XC switching config with 2 thread, 1 phy core,\
 | | ... | 1 receive queue per NIC port.
diff --git a/tests/kubernetes/perf/container_memif/10ge2p1x520-ch-eth-1drcl2xcbase-eth-8memif-4drcl2xc-k8s-ndrpdrdisc.robot b/tests/kubernetes/perf/container_memif/10ge2p1x520-ch-eth-1drcl2xcbase-eth-8memif-4drcl2xc-k8s-ndrpdrdisc.robot
new file mode 100644
index 0000000000..bac6ab753b
--- /dev/null
+++ b/tests/kubernetes/perf/container_memif/10ge2p1x520-ch-eth-1drcl2xcbase-eth-8memif-4drcl2xc-k8s-ndrpdrdisc.robot
@@ -0,0 +1,323 @@
+# Copyright (c) 2017 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/performance/performance_setup.robot
+| ...
+| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDRDISC
+| ... | NIC_Intel-X520-DA2 | ETH | L2XCFWD | SCALE | L2XCBASE | MEMIF
+| ... | K8S | 1VSWITCH | 4VNF | VPP_AGENT | SFC_CONTROLLER | CHAIN
+| ...
+| Suite Setup | Set up 3-node performance topology with DUT's NIC model
+| ... | L2 | Intel-X520-DA2
+| ...
+| Test Setup | Set up performance test with Ligato Kubernetes
+| ...
+| Suite Teardown | Tear down 3-node performance topology
+| ...
+| Test Teardown | Tear down performance test with Ligato Kubernetes
+| ...
+| Documentation | *RFC2544: Pkt throughput L2XC test cases*
+| ...
+| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
+| ... | with single links between nodes.
+| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 cross connect.
+| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 cross-
+| ... | connect. DUT1 and DUT2 tested with 2p10GE NIC X520 Niantic by Intel.
+| ... | VNF Containers are connected to VSWITCH container via Memif interface.
+| ... | All containers are running same VPP version. Containers are deployed
+| ... | with Kubernetes. Configuration is applied by vnf-agent.
+| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop
+| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop
+| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage
+| ... | of packets transmitted. NDR and PDR are discovered for different
+| ... | Ethernet L2 frame sizes using either binary search or linear search
+| ... | algorithms with configured starting rate and final step that determines
+| ... | throughput measurement resolution. Test packets are generated by TG on
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups
+| ... | (flow-group per direction, 253 flows per flow-group) with all packets
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static
+| ... | payload. MAC addresses are matching MAC addresses of the TG node
+| ... | interfaces.
+| ... | *[Ref] Applicable standard specifications:* RFC2544.
+
+*** Variables ***
+| ${avg_imix_framesize}= | ${357.833}
+# X520-DA2 bandwidth limit
+| ${s_limit} | ${10000000000}
+# SFC profile
+| ${sfc_profile} | configmaps/ch-eth-1drcl2xcbase-eth-8memif-4drcl2xc
+# Traffic profile:
+| ${traffic_profile} | trex-sl-3n-ethip4-ip4src254
+# CPU settings
+| ${system_cpus}= | ${1}
+| ${vswitch_cpus}= | ${5}
+| ${vnf_cpus}= | ${2}
+
+*** Keywords ***
+| Create Kubernetes VSWITCH startup config on all DUTs
+| | [Documentation] | Create base startup configuration of VSWITCH in Kubernetes
+| | ... | deploy to all DUTs.
+| | ...
+| | ... | *Arguments:*
+| | ... | - ${framesize} - L2 framesize. Type: integer
+| | ... | - ${wt} - Worker threads. Type: integer
+| | ... | - ${rxq} - RX queues. Type: integer
+| | ...
+| | ... | *Example:*
+| | ...
+| | ... | \| Create Kubernetes VSWITCH startup config on all DUTs \| ${64} \
+| | ... | \| ${1} \| ${1}
+| | ...
+| | [Arguments] | ${framesize} | ${wt} | ${rxq}
+| | ${dut1_numa}= | Get interfaces numa node | ${dut1}
+| | ... | ${dut1_if1} | ${dut1_if2}
+| | ${dut2_numa}= | Get interfaces numa node | ${dut2}
+| | ... | ${dut2_if1} | ${dut2_if2}
+| | ${dut1_if1_pci}= | Get Interface PCI Addr | ${dut1} | ${dut1_if1}
+| | ${dut1_if2_pci}= | Get Interface PCI Addr | ${dut1} | ${dut1_if2}
+| | ${dut2_if1_pci}= | Get Interface PCI Addr | ${dut2} | ${dut2_if1}
+| | ${dut2_if2_pci}= | Get Interface PCI Addr | ${dut2} | ${dut2_if2}
+| | ${cpu_cnt}= | Evaluate | ${wt}+1
+| | ${config}= | Run keyword | Create Kubernetes VSWITCH startup config
+| | ... | node=${dut1} | cpu_cnt=${cpu_cnt} | cpu_node=${dut1_numa}
+| | ... | cpu_skip=${system_cpus} | smt_used=${False}
+| | ... | filename=/tmp/vswitch.conf | framesize=${framesize} | rxq=${rxq}
+| | ... | if1=${dut1_if1_pci} | if2=${dut1_if2_pci}
+| | ${config}= | Run keyword | Create Kubernetes VSWITCH startup config
+| | ... | node=${dut2} | cpu_cnt=${cpu_cnt} | cpu_node=${dut2_numa}
+| | ... | cpu_skip=${system_cpus} | smt_used=${False}
+| | ... | filename=/tmp/vswitch.conf | framesize=${framesize} | rxq=${rxq}
+| | ... | if1=${dut2_if1_pci} | if2=${dut2_if2_pci}
+
+| Create Kubernetes VNF'${i}' startup config on all DUTs
+| | [Documentation] | Create base startup configuration of VNF in Kubernetes
+| | ... | deploy to all DUTs.
+| | ...
+| | ${i_int}= | Convert To Integer | ${i}
+| | ${cpu_skip}= | Evaluate | ${vswitch_cpus}+${system_cpus}
+| | ${dut1_numa}= | Get interfaces numa node | ${dut1}
+| | ... | ${dut1_if1} | ${dut1_if2}
+| | ${dut2_numa}= | Get interfaces numa node | ${dut2}
+| | ... | ${dut2_if1} | ${dut2_if2}
+| | ${config}= | Run keyword | Create Kubernetes VNF startup config
+| | ... | node=${dut1} | cpu_cnt=${vnf_cpus} | cpu_node=${dut1_numa}
+| | ... | cpu_skip=${cpu_skip} | smt_used=${False} | filename=/tmp/vnf${i}.conf
+| | ... | i=${i_int}
+| | ${config}= | Run keyword | Create Kubernetes VNF startup config
+| | ... | node=${dut2} | cpu_cnt=${vnf_cpus} | cpu_node=${dut2_numa}
+| | ... | cpu_skip=${cpu_skip} | smt_used=${False} | filename=/tmp/vnf${i}.conf
+| | ... | i=${i_int}
+
+| L2 Cross Connect Binary Search
+| | [Arguments] | ${framesize} | ${min_rate} | ${wt} | ${rxq} | ${search_type}
+| | Set Test Variable | ${framesize}
+| | Set Test Variable | ${min_rate}
+| | ${get_framesize}= | Set Variable If
+| | ... | "${framesize}" == "IMIX_v4_1" | ${avg_imix_framesize} | ${framesize}
+| | ${max_rate}= | Calculate pps | ${s_limit} | ${get_framesize}
+| | ${binary_min}= | Set Variable | ${min_rate}
+| | ${binary_max}= | Set Variable | ${max_rate}
+| | ${threshold}= | Set Variable | ${min_rate}
+| | ${dut1_if1_name}= | Get interface name | ${dut1} | ${dut1_if1}
+| | ${dut1_if2_name}= | Get interface name | ${dut1} | ${dut1_if2}
+| | ${dut2_if1_name}= | Get interface name | ${dut2} | ${dut2_if1}
+| | ${dut2_if2_name}= | Get interface name | ${dut2} | ${dut2_if2}
+| | Create Kubernetes VSWITCH startup config on all DUTs | ${get_framesize}
+| | ... | ${wt} | ${rxq}
+| | Create Kubernetes VNF'1' startup config on all DUTs
+| | Create Kubernetes VNF'2' startup config on all DUTs
+| | Create Kubernetes VNF'3' startup config on all DUTs
+| | Create Kubernetes VNF'4' startup config on all DUTs
+| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit
+| | ... | name=vswitch-vpp-cfg | vpp.conf=/tmp/vswitch.conf
+| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit
+| | ... | name=vnf1-vpp-cfg | vpp.conf=/tmp/vnf1.conf
+| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit
+| | ... | name=vnf2-vpp-cfg | vpp.conf=/tmp/vnf2.conf
+| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit
+| | ... | name=vnf3-vpp-cfg | vpp.conf=/tmp/vnf3.conf
+| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit
+| | ... | name=vnf4-vpp-cfg | vpp.conf=/tmp/vnf4.conf
+| | Apply Kubernetes resource on node | ${dut1}
+| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf1
+| | Apply Kubernetes resource on node | ${dut2}
+| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf1
+| | Apply Kubernetes resource on node | ${dut1}
+| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf2
+| | Apply Kubernetes resource on node | ${dut2}
+| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf2
+| | Apply Kubernetes resource on node | ${dut1}
+| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf3
+| | Apply Kubernetes resource on node | ${dut2}
+| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf3
+| | Apply Kubernetes resource on node | ${dut1}
+| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf4
+| | Apply Kubernetes resource on node | ${dut2}
+| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf4
+| | Apply Kubernetes resource on node | ${dut1}
+| | ... | ${sfc_profile}.yaml | $$TEST_NAME$$=${TEST NAME}
+| | ... | $$VSWITCH_IF1$$=${dut1_if1_name}
+| | ... | $$VSWITCH_IF2$$=${dut1_if2_name}
+| | Apply Kubernetes resource on node | ${dut2}
+| | ... | ${sfc_profile}.yaml | $$TEST_NAME$$=${TEST NAME}
+| | ... | $$VSWITCH_IF1$$=${dut2_if1_name}
+| | ... | $$VSWITCH_IF2$$=${dut2_if2_name}
+| | Wait for Kubernetes PODs on all DUTs | ${nodes} | csit
+| | Set Kubernetes PODs affinity on all DUTs | ${nodes}
+| | Run Keyword If | '${search_type}' == 'NDR'
+| | ... | Find NDR using binary search and pps
+| | ... | ${framesize} | ${binary_min} | ${binary_max} | ${traffic_profile}
+| | ... | ${min_rate} | ${max_rate} | ${threshold}
+| | ... | ELSE IF | '${search_type}' == 'PDR'
+| | ... | Find PDR using binary search and pps
+| | ... | ${framesize} | ${binary_min} | ${binary_max} | ${traffic_profile}
+| | ... | ${min_rate} | ${max_rate} | ${threshold}
+| | ... | ${perf_pdr_loss_acceptance} | ${perf_pdr_loss_acceptance_type}
+
+*** Test Cases ***
+| tc01-64B-1t1c-ch-eth-1drcl2xcbase-eth-4memif-2drcl2xc-k8s-ndrdisc
+| | [Documentation]
+| | ... | [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core,\
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\
+| | ... | linerate, step 100kpps.
+| | ...
+| | [Tags] | 64B | 1T1C | STHREAD | NDRDISC
+| | [Template] | L2 Cross Connect Binary Search
+| | framesize=${64} | min_rate=${100000} | wt=1 | rxq=1 | search_type=NDR
+
+| tc02-64B-1t1c-ch-eth-1drcl2xcbase-eth-4memif-2drcl2xc-k8s-pdrdisc
+| | [Documentation]
+| | ... | [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core,\
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\
+| | ... | linerate, step 100kpps, LT=0.5%.
+| | ...
+| | [Tags] | 64B | 1T1C | STHREAD | PDRDISC | SKIP_PATCH
+| | [Template] | L2 Cross Connect Binary Search
+| | framesize=${64} | min_rate=${100000} | wt=1 | rxq=1 | search_type=PDR
+
+| tc03-IMIX-1t1c-ch-eth-1drcl2xcbase-eth-4memif-2drcl2xc-k8s-ndrdisc
+| | [Documentation]
+| | ... | [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core,\
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Find NDR for IMIX_v4_1 frames using binary search start at 10GE\
+| | ... | linerate, step 10kpps.
+| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B)
+| | ...
+| | [Tags] | IMIX | 1T1C | STHREAD | NDRDISC
+| | [Template] | L2 Cross Connect Binary Search
+| | framesize=IMIX_v4_1 | min_rate=${10000} | wt=1 | rxq=1 | search_type=NDR
+
+| tc04-IMIX-1t1c-ch-eth-1drcl2xcbase-eth-4memif-2drcl2xc-k8s-pdrdisc
+| | [Documentation]
+| | ... | [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core,\
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Find PDR for IMIX_v4_1 frames using binary search start at 10GE\
+| | ... | linerate, step 10kpps, LT=0.5%.
+| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B)
+| | ...
+| | [Tags] | IMIX | 1T1C | STHREAD | PDRDISC | SKIP_PATCH
+| | [Template] | L2 Cross Connect Binary Search
+| | framesize=IMIX_v4_1 | min_rate=${10000} | wt=1 | rxq=1 | search_type=PDR
+
+| tc05-1518B-1t1c-ch-eth-1drcl2xcbase-eth-4memif-2drcl2xc-k8s-ndrdisc
+| | [Documentation]
+| | ... | [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core,\
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\
+| | ... | linerate, step 10kpps.
+| | ...
+| | [Tags] | 1518B | 1T1C | STHREAD | NDRDISC
+| | [Template] | L2 Cross Connect Binary Search
+| | framesize=${1518} | min_rate=${10000} | wt=1 | rxq=1 | search_type=NDR
+
+| tc06-1518B-1t1c-ch-eth-1drcl2xcbase-eth-4memif-2drcl2xc-k8s-pdrdisc
+| | [Documentation]
+| | ... | [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core,\
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\
+| | ... | linerate, step 10kpps, LT=0.5%.
+| | ...
+| | [Tags] | 1518B | 1T1C | STHREAD | PDRDISC | SKIP_PATCH
+| | [Template] | L2 Cross Connect Binary Search
+| | framesize=${1518} | min_rate=${10000} | wt=1 | rxq=1 | search_type=PDR
+
+| tc07-64B-2t2c-ch-eth-1drcl2xcbase-eth-4memif-2drcl2xc-k8s-ndrdisc
+| | [Documentation]
+| | ... | [Cfg] DUT runs L2XC switching config with 2 thread, 2 phy core,\
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\
+| | ... | linerate, step 100kpps.
+| | ...
+| | [Tags] | 64B | 2T2C | MTHREAD | NDRDISC
+| | [Template] | L2 Cross Connect Binary Search
+| | framesize=${64} | min_rate=${100000} | wt=2 | rxq=1 | search_type=NDR
+
+| tc08-64B-2t2c-ch-eth-1drcl2xcbase-eth-4memif-2drcl2xc-k8s-pdrdisc
+| | [Documentation]
+| | ... | [Cfg] DUT runs L2XC switching config with 2 thread, 2 phy core,\
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\
+| | ... | linerate, step 100kpps, LT=0.5%.
+| | ...
+| | [Tags] | 64B | 2T2C | MTHREAD | PDRDISC | SKIP_PATCH
+| | [Template] | L2 Cross Connect Binary Search
+| | framesize=${64} | min_rate=${100000} | wt=2 | rxq=1 | search_type=PDR
+
+| tc09-IMIX-2t2c-ch-eth-1drcl2xcbase-eth-4memif-2drcl2xc-k8s-ndrdisc
+| | [Documentation]
+| | ... | [Cfg] DUT runs L2XC switching config with 2 thread, 2 phy core,\
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Find NDR for IMIX_v4_1 frames using binary search start at 10GE\
+| | ... | linerate, step 10kpps.
+| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B)
+| | ...
+| | [Tags] | IMIX | 2T2C | MTHREAD | NDRDISC | SKIP_PATCH
+| | [Template] | L2 Cross Connect Binary Search
+| | framesize=IMIX_v4_1 | min_rate=${10000} | wt=2 | rxq=1 | search_type=NDR
+
+| tc10-IMIX-2t2c-ch-eth-1drcl2xcbase-eth-4memif-2drcl2xc-k8s-pdrdisc
+| | [Documentation]
+| | ... | [Cfg] DUT runs L2XC switching config with 2 thread, 1 phy core,\
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Find PDR for IMIX_v4_1 frames using binary search start at 10GE\
+| | ... | linerate, step 10kpps, LT=0.5%.
+| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B)
+| | ...
+| | [Tags] | IMIX | 2T2C | MTHREAD | PDRDISC | SKIP_PATCH
+| | [Template] | L2 Cross Connect Binary Search
+| | framesize=IMIX_v4_1 | min_rate=${10000} | wt=2 | rxq=1 | search_type=PDR
+
+| tc11-1518B-2t2c-ch-eth-1drcl2xcbase-eth-4memif-2drcl2xc-k8s-ndrdisc
+| | [Documentation]
+| | ... | [Cfg] DUT runs L2XC switching config with 2 thread, 1 phy core,\
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\
+| | ... | linerate, step 10kpps.
+| | ...
+| | [Tags] | 1518B | 2T2C | MTHREAD | NDRDISC | SKIP_PATCH
+| | [Template] | L2 Cross Connect Binary Search
+| | framesize=${1518} | min_rate=${10000} | wt=2 | rxq=1 | search_type=NDR
+
+| tc12-1518B-2t2c-ch-eth-1drcl2xcbase-eth-4memif-2drcl2xc-k8s-pdrdisc
+| | [Documentation]
+| | ... | [Cfg] DUT runs L2XC switching config with 2 thread, 1 phy core,\
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\
+| | ... | linerate, step 10kpps, LT=0.5%.
+| | ...
+| | [Tags] | 1518B | 2T2C | MTHREAD | PDRDISC | SKIP_PATCH
+| | [Template] | L2 Cross Connect Binary Search
+| | framesize=${1518} | min_rate=${10000} | wt=2 | rxq=1 | search_type=PDR
diff --git a/tests/kubernetes/perf/container_memif/10ge2p1x520-ho-eth-1drcl2bdbasemaclrn-eth-2memif-2drcl2xc-k8s-ndrpdrdisc.robot b/tests/kubernetes/perf/container_memif/10ge2p1x520-ho-eth-1drcl2bdbasemaclrn-eth-2memif-2drcl2xc-k8s-ndrpdrdisc.robot
new file mode 100644
index 0000000000..17e85f5abd
--- /dev/null
+++ b/tests/kubernetes/perf/container_memif/10ge2p1x520-ho-eth-1drcl2bdbasemaclrn-eth-2memif-2drcl2xc-k8s-ndrpdrdisc.robot
@@ -0,0 +1,310 @@
+# Copyright (c) 2017 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/performance/performance_setup.robot
+| ...
+| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDRDISC
+| ... | NIC_Intel-X520-DA2 | ETH | L2BDMACLRN | L2BDBASE | SCALE | MEMIF
+| ... | K8S | 1VSWITCH | 2VNF | VPP_AGENT | SFC_CONTROLLER | HORIZONTAL
+| ...
+| Suite Setup | Set up 3-node performance topology with DUT's NIC model
+| ... | L2 | Intel-X520-DA2
+| ...
+| Test Setup | Set up performance test with Ligato Kubernetes
+| ...
+| Suite Teardown | Tear down 3-node performance topology
+| ...
+| Test Teardown | Tear down performance test with Ligato Kubernetes
+| ...
+| Documentation | *RFC2544: Pkt throughput L2BD test cases*
+| ...
+| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
+| ... | with single links between nodes.
+| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
+| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with two L2
+| ... | bridge domains and MAC learning enabled. DUT1 and DUT2 tested with
+| ... | 2p10GE NIC X520 Niantic by Intel.
+| ... | VNF Containers are connected to VSWITCH container via Memif interface.
+| ... | All containers are running same VPP version. Containers are deployed
+| ... | with Kubernetes. Configuration is applied by vnf-agent.
+| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop
+| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop
+| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage
+| ... | of packets transmitted. NDR and PDR are discovered for different
+| ... | Ethernet L2 frame sizes using either binary search or linear search
+| ... | algorithms with configured starting rate and final step that determines
+| ... | throughput measurement resolution. Test packets are generated by TG on
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups
+| ... | (flow-group per direction, 253 flows per flow-group) with all packets
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static
+| ... | payload. MAC addresses are matching MAC addresses of the TG node
+| ... | interfaces.
+| ... | *[Ref] Applicable standard specifications:* RFC2544.
+
+*** Variables ***
+| ${avg_imix_framesize}= | ${357.833}
+# X520-DA2 bandwidth limit
+| ${s_limit} | ${10000000000}
+# SFC profile
+| ${sfc_profile} | configmaps/ho-eth-1drcl2bdbasemaclrn-eth-2memif-2drcl2xc
+# Traffic profile:
+| ${traffic_profile} | trex-sl-3n-ethip4-ip4src254
+# CPU settings
+| ${system_cpus}= | ${1}
+| ${vswitch_cpus}= | ${5}
+| ${vnf_cpus}= | ${2}
+
+*** Keywords ***
+| Create Kubernetes VSWITCH startup config on all DUTs
+| | [Documentation] | Create base startup configuration of VSWITCH in Kubernetes
+| | ... | deploy to all DUTs.
+| | ...
+| | ... | *Arguments:*
+| | ... | - ${framesize} - L2 framesize. Type: integer
+| | ... | - ${wt} - Worker threads. Type: integer
+| | ... | - ${rxq} - RX queues. Type: integer
+| | ...
+| | ... | *Example:*
+| | ...
+| | ... | \| Create Kubernetes VSWITCH startup config on all DUTs \| ${64} \
+| | ... | \| ${1} \| ${1}
+| | ...
+| | [Arguments] | ${framesize} | ${wt} | ${rxq}
+| | ${dut1_numa}= | Get interfaces numa node | ${dut1}
+| | ... | ${dut1_if1} | ${dut1_if2}
+| | ${dut2_numa}= | Get interfaces numa node | ${dut2}
+| | ... | ${dut2_if1} | ${dut2_if2}
+| | ${dut1_if1_pci}= | Get Interface PCI Addr | ${dut1} | ${dut1_if1}
+| | ${dut1_if2_pci}= | Get Interface PCI Addr | ${dut1} | ${dut1_if2}
+| | ${dut2_if1_pci}= | Get Interface PCI Addr | ${dut2} | ${dut2_if1}
+| | ${dut2_if2_pci}= | Get Interface PCI Addr | ${dut2} | ${dut2_if2}
+| | ${cpu_cnt}= | Evaluate | ${wt}+1
+| | ${config}= | Run keyword | Create Kubernetes VSWITCH startup config
+| | ... | node=${dut1} | cpu_cnt=${cpu_cnt} | cpu_node=${dut1_numa}
+| | ... | cpu_skip=${system_cpus} | smt_used=${False}
+| | ... | filename=/tmp/vswitch.conf | framesize=${framesize} | rxq=${rxq}
+| | ... | if1=${dut1_if1_pci} | if2=${dut1_if2_pci}
+| | ${config}= | Run keyword | Create Kubernetes VSWITCH startup config
+| | ... | node=${dut2} | cpu_cnt=${cpu_cnt} | cpu_node=${dut2_numa}
+| | ... | cpu_skip=${system_cpus} | smt_used=${False}
+| | ... | filename=/tmp/vswitch.conf | framesize=${framesize} | rxq=${rxq}
+| | ... | if1=${dut2_if1_pci} | if2=${dut2_if2_pci}
+
+| Create Kubernetes VNF'${i}' startup config on all DUTs
+| | [Documentation] | Create base startup configuration of VNF in Kubernetes
+| | ... | deploy to all DUTs.
+| | ...
+| | ${i_int}= | Convert To Integer | ${i}
+| | ${cpu_skip}= | Evaluate | ${vswitch_cpus}+${system_cpus}
+| | ${dut1_numa}= | Get interfaces numa node | ${dut1}
+| | ... | ${dut1_if1} | ${dut1_if2}
+| | ${dut2_numa}= | Get interfaces numa node | ${dut2}
+| | ... | ${dut2_if1} | ${dut2_if2}
+| | ${config}= | Run keyword | Create Kubernetes VNF startup config
+| | ... | node=${dut1} | cpu_cnt=${vnf_cpus} | cpu_node=${dut1_numa}
+| | ... | cpu_skip=${cpu_skip} | smt_used=${False} | filename=/tmp/vnf${i}.conf
+| | ... | i=${i_int}
+| | ${config}= | Run keyword | Create Kubernetes VNF startup config
+| | ... | node=${dut2} | cpu_cnt=${vnf_cpus} | cpu_node=${dut2_numa}
+| | ... | cpu_skip=${cpu_skip} | smt_used=${False} | filename=/tmp/vnf${i}.conf
+| | ... | i=${i_int}
+
+| L2 Bridge Domain Binary Search
+| | [Arguments] | ${framesize} | ${min_rate} | ${wt} | ${rxq} | ${search_type}
+| | Set Test Variable | ${framesize}
+| | Set Test Variable | ${min_rate}
+| | ${get_framesize}= | Set Variable If
+| | ... | "${framesize}" == "IMIX_v4_1" | ${avg_imix_framesize} | ${framesize}
+| | ${max_rate}= | Calculate pps | ${s_limit} | ${get_framesize}
+| | ${binary_min}= | Set Variable | ${min_rate}
+| | ${binary_max}= | Set Variable | ${max_rate}
+| | ${threshold}= | Set Variable | ${min_rate}
+| | ${dut1_if1_name}= | Get interface name | ${dut1} | ${dut1_if1}
+| | ${dut1_if2_name}= | Get interface name | ${dut1} | ${dut1_if2}
+| | ${dut2_if1_name}= | Get interface name | ${dut2} | ${dut2_if1}
+| | ${dut2_if2_name}= | Get interface name | ${dut2} | ${dut2_if2}
+| | Create Kubernetes VSWITCH startup config on all DUTs | ${get_framesize}
+| | ... | ${wt} | ${rxq}
+| | Create Kubernetes VNF'1' startup config on all DUTs
+| | Create Kubernetes VNF'2' startup config on all DUTs
+| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit
+| | ... | name=vswitch-vpp-cfg | vpp.conf=/tmp/vswitch.conf
+| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit
+| | ... | name=vnf1-vpp-cfg | vpp.conf=/tmp/vnf1.conf
+| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit
+| | ... | name=vnf2-vpp-cfg | vpp.conf=/tmp/vnf2.conf
+| | Apply Kubernetes resource on node | ${dut1}
+| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf1
+| | Apply Kubernetes resource on node | ${dut2}
+| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf1
+| | Apply Kubernetes resource on node | ${dut1}
+| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf2
+| | Apply Kubernetes resource on node | ${dut2}
+| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf2
+| | Apply Kubernetes resource on node | ${dut1}
+| | ... | ${sfc_profile}.yaml | $$TEST_NAME$$=${TEST NAME}
+| | ... | $$VSWITCH_IF1$$=${dut1_if1_name}
+| | ... | $$VSWITCH_IF2$$=${dut1_if2_name}
+| | Apply Kubernetes resource on node | ${dut2}
+| | ... | ${sfc_profile}.yaml | $$TEST_NAME$$=${TEST NAME}
+| | ... | $$VSWITCH_IF1$$=${dut2_if1_name}
+| | ... | $$VSWITCH_IF2$$=${dut2_if2_name}
+| | Wait for Kubernetes PODs on all DUTs | ${nodes} | csit
+| | Set Kubernetes PODs affinity on all DUTs | ${nodes}
+| | Run Keyword If | '${search_type}' == 'NDR'
+| | ... | Find NDR using binary search and pps
+| | ... | ${framesize} | ${binary_min} | ${binary_max} | ${traffic_profile}
+| | ... | ${min_rate} | ${max_rate} | ${threshold}
+| | ... | ELSE IF | '${search_type}' == 'PDR'
+| | ... | Find PDR using binary search and pps
+| | ... | ${framesize} | ${binary_min} | ${binary_max} | ${traffic_profile}
+| | ... | ${min_rate} | ${max_rate} | ${threshold}
+| | ... | ${perf_pdr_loss_acceptance} | ${perf_pdr_loss_acceptance_type}
+
+*** Test Cases ***
+| tc01-64B-1t1c-ho-eth-1drcl2bdbasemaclrn-eth-2memif-2drcl2xc-k8s-ndrdisc
+| | [Documentation]
+| | ... | [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core,\
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\
+| | ... | linerate, step 100kpps.
+| | ...
+| | [Tags] | 64B | 1T1C | STHREAD | NDRDISC
+| | [Template] | L2 Bridge Domain Binary Search
+| | framesize=${64} | min_rate=${100000} | wt=1 | rxq=1 | search_type=NDR
+
+| tc02-64B-1t1c-ho-eth-1drcl2bdbasemaclrn-eth-2memif-2drcl2xc-k8s-pdrdisc
+| | [Documentation]
+| | ... | [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core,\
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\
+| | ... | linerate, step 100kpps, LT=0.5%.
+| | ...
+| | [Tags] | 64B | 1T1C | STHREAD | PDRDISC | SKIP_PATCH
+| | [Template] | L2 Bridge Domain Binary Search
+| | framesize=${64} | min_rate=${100000} | wt=1 | rxq=1 | search_type=PDR
+
+| tc03-IMIX-1t1c-ho-eth-1drcl2bdbasemaclrn-eth-2memif-2drcl2xc-k8s-ndrdisc
+| | [Documentation]
+| | ... | [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core,\
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Find NDR for IMIX_v4_1 frames using binary search start at 10GE\
+| | ... | linerate, step 10kpps.
+| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B)
+| | ...
+| | [Tags] | IMIX | 1T1C | STHREAD | NDRDISC
+| | [Template] | L2 Bridge Domain Binary Search
+| | framesize=IMIX_v4_1 | min_rate=${10000} | wt=1 | rxq=1 | search_type=NDR
+
+| tc04-IMIX-1t1c-ho-eth-1drcl2bdbasemaclrn-eth-2memif-2drcl2xc-k8s-pdrdisc
+| | [Documentation]
+| | ... | [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core,\
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Find PDR for IMIX_v4_1 frames using binary search start at 10GE\
+| | ... | linerate, step 10kpps, LT=0.5%.
+| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B)
+| | ...
+| | [Tags] | IMIX | 1T1C | STHREAD | PDRDISC | SKIP_PATCH
+| | [Template] | L2 Bridge Domain Binary Search
+| | framesize=IMIX_v4_1 | min_rate=${10000} | wt=1 | rxq=1 | search_type=PDR
+
+| tc05-1518B-1t1c-ho-eth-1drcl2bdbasemaclrn-eth-2memif-2drcl2xc-k8s-ndrdisc
+| | [Documentation]
+| | ... | [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core,\
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\
+| | ... | linerate, step 10kpps.
+| | ...
+| | [Tags] | 1518B | 1T1C | STHREAD | NDRDISC
+| | [Template] | L2 Bridge Domain Binary Search
+| | framesize=${1518} | min_rate=${10000} | wt=1 | rxq=1 | search_type=NDR
+
+| tc06-1518B-1t1c-ho-eth-1drcl2bdbasemaclrn-eth-2memif-2drcl2xc-k8s-pdrdisc
+| | [Documentation]
+| | ... | [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core,\
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\
+| | ... | linerate, step 10kpps, LT=0.5%.
+| | ...
+| | [Tags] | 1518B | 1T1C | STHREAD | PDRDISC | SKIP_PATCH
+| | [Template] | L2 Bridge Domain Binary Search
+| | framesize=${1518} | min_rate=${10000} | wt=1 | rxq=1 | search_type=PDR
+
+| tc07-64B-2t2c-ho-eth-1drcl2bdbasemaclrn-eth-2memif-2drcl2xc-k8s-ndrdisc
+| | [Documentation]
+| | ... | [Cfg] DUT runs L2BD switching config with 2 thread, 2 phy core,\
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\
+| | ... | linerate, step 100kpps.
+| | ...
+| | [Tags] | 64B | 2T2C | MTHREAD | NDRDISC
+| | [Template] | L2 Bridge Domain Binary Search
+| | framesize=${64} | min_rate=${100000} | wt=2 | rxq=1 | search_type=NDR
+
+| tc08-64B-2t2c-ho-eth-1drcl2bdbasemaclrn-eth-2memif-2drcl2xc-k8s-pdrdisc
+| | [Documentation]
+| | ... | [Cfg] DUT runs L2BD switching config with 2 thread, 2 phy core,\
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\
+| | ... | linerate, step 100kpps, LT=0.5%.
+| | ...
+| | [Tags] | 64B | 2T2C | MTHREAD | PDRDISC | SKIP_PATCH
+| | [Template] | L2 Bridge Domain Binary Search
+| | framesize=${64} | min_rate=${100000} | wt=2 | rxq=1 | search_type=PDR
+
+| tc09-IMIX-2t2c-ho-eth-1drcl2bdbasemaclrn-eth-2memif-2drcl2xc-k8s-ndrdisc
+| | [Documentation]
+| | ... | [Cfg] DUT runs L2BD switching config with 2 thread, 2 phy core,\
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Find NDR for IMIX_v4_1 frames using binary search start at 10GE\
+| | ... | linerate, step 10kpps.
+| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B)
+| | ...
+| | [Tags] | IMIX | 2T2C | MTHREAD | NDRDISC | SKIP_PATCH
+| | [Template] | L2 Bridge Domain Binary Search
+| | framesize=IMIX_v4_1 | min_rate=${10000} | wt=2 | rxq=1 | search_type=NDR
+
+| tc10-IMIX-2t2c-ho-eth-1drcl2bdbasemaclrn-eth-2memif-2drcl2xc-k8s-pdrdisc
+| | [Documentation]
+| | ... | [Cfg] DUT runs L2BD switching config with 2 thread, 1 phy core,\
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Find PDR for IMIX_v4_1 frames using binary search start at 10GE\
+| | ... | linerate, step 10kpps, LT=0.5%.
+| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B)
+| | ...
+| | [Tags] | IMIX | 2T2C | MTHREAD | PDRDISC | SKIP_PATCH
+| | [Template] | L2 Bridge Domain Binary Search
+| | framesize=IMIX_v4_1 | min_rate=${10000} | wt=2 | rxq=1 | search_type=PDR
+
+| tc11-1518B-2t2c-ho-eth-1drcl2bdbasemaclrn-eth-2memif-2drcl2xc-k8s-ndrdisc
+| | [Documentation]
+| | ... | [Cfg] DUT runs L2BD switching config with 2 thread, 1 phy core,\
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\
+| | ... | linerate, step 10kpps.
+| | ...
+| | [Tags] | 1518B | 2T2C | MTHREAD | NDRDISC | SKIP_PATCH
+| | [Template] | L2 Bridge Domain Binary Search
+| | framesize=${1518} | min_rate=${10000} | wt=2 | rxq=1 | search_type=NDR
+
+| tc12-1518B-2t2c-ho-eth-1drcl2bdbasemaclrn-eth-2memif-2drcl2xc-k8s-pdrdisc
+| | [Documentation]
+| | ... | [Cfg] DUT runs L2BD switching config with 2 thread, 1 phy core,\
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\
+| | ... | linerate, step 10kpps, LT=0.5%.
+| | ...
+| | [Tags] | 1518B | 2T2C | MTHREAD | PDRDISC | SKIP_PATCH
+| | [Template] | L2 Bridge Domain Binary Search
+| | framesize=${1518} | min_rate=${10000} | wt=2 | rxq=1 | search_type=PDR
diff --git a/tests/kubernetes/perf/container_memif/10ge2p1x520-ho-eth-1drcl2bdbasemaclrn-eth-2memif-4drcl2xc-k8s-ndrpdrdisc.robot b/tests/kubernetes/perf/container_memif/10ge2p1x520-ho-eth-1drcl2bdbasemaclrn-eth-2memif-4drcl2xc-k8s-ndrpdrdisc.robot
new file mode 100644
index 0000000000..5695688008
--- /dev/null
+++ b/tests/kubernetes/perf/container_memif/10ge2p1x520-ho-eth-1drcl2bdbasemaclrn-eth-2memif-4drcl2xc-k8s-ndrpdrdisc.robot
@@ -0,0 +1,324 @@
+# Copyright (c) 2017 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/performance/performance_setup.robot
+| ...
+| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDRDISC
+| ... | NIC_Intel-X520-DA2 | ETH | L2BDMACLRN | L2BDBASE | SCALE | MEMIF
+| ... | K8S | 1VSWITCH | 4VNF | VPP_AGENT | SFC_CONTROLLER | HORIZONTAL
+| ...
+| Suite Setup | Set up 3-node performance topology with DUT's NIC model
+| ... | L2 | Intel-X520-DA2
+| ...
+| Test Setup | Set up performance test with Ligato Kubernetes
+| ...
+| Suite Teardown | Tear down 3-node performance topology
+| ...
+| Test Teardown | Tear down performance test with Ligato Kubernetes
+| ...
+| Documentation | *RFC2544: Pkt throughput L2BD test cases*
+| ...
+| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
+| ... | with single links between nodes.
+| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
+| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with two L2
+| ... | bridge domains and MAC learning enabled. DUT1 and DUT2 tested with
+| ... | 2p10GE NIC X520 Niantic by Intel.
+| ... | VNF Containers are connected to VSWITCH container via Memif interface.
+| ... | All containers are running same VPP version. Containers are deployed
+| ... | with Kubernetes. Configuration is applied by vnf-agent.
+| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop
+| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop
+| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage
+| ... | of packets transmitted. NDR and PDR are discovered for different
+| ... | Ethernet L2 frame sizes using either binary search or linear search
+| ... | algorithms with configured starting rate and final step that determines
+| ... | throughput measurement resolution. Test packets are generated by TG on
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups
+| ... | (flow-group per direction, 253 flows per flow-group) with all packets
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static
+| ... | payload. MAC addresses are matching MAC addresses of the TG node
+| ... | interfaces.
+| ... | *[Ref] Applicable standard specifications:* RFC2544.
+
+*** Variables ***
+| ${avg_imix_framesize}= | ${357.833}
+# X520-DA2 bandwidth limit
+| ${s_limit} | ${10000000000}
+# SFC profile
+| ${sfc_profile} | configmaps/ho-eth-1drcl2bdbasemaclrn-eth-2memif-4drcl2xc
+# Traffic profile:
+| ${traffic_profile} | trex-sl-3n-ethip4-ip4src254
+# CPU settings
+| ${system_cpus}= | ${1}
+| ${vswitch_cpus}= | ${5}
+| ${vnf_cpus}= | ${2}
+
+*** Keywords ***
+| Create Kubernetes VSWITCH startup config on all DUTs
+| | [Documentation] | Create base startup configuration of VSWITCH in Kubernetes
+| | ... | deploy to all DUTs.
+| | ...
+| | ... | *Arguments:*
+| | ... | - ${framesize} - L2 framesize. Type: integer
+| | ... | - ${wt} - Worker threads. Type: integer
+| | ... | - ${rxq} - RX queues. Type: integer
+| | ...
+| | ... | *Example:*
+| | ...
+| | ... | \| Create Kubernetes VSWITCH startup config on all DUTs \| ${64} \
+| | ... | \| ${1} \| ${1}
+| | ...
+| | [Arguments] | ${framesize} | ${wt} | ${rxq}
+| | ${dut1_numa}= | Get interfaces numa node | ${dut1}
+| | ... | ${dut1_if1} | ${dut1_if2}
+| | ${dut2_numa}= | Get interfaces numa node | ${dut2}
+| | ... | ${dut2_if1} | ${dut2_if2}
+| | ${dut1_if1_pci}= | Get Interface PCI Addr | ${dut1} | ${dut1_if1}
+| | ${dut1_if2_pci}= | Get Interface PCI Addr | ${dut1} | ${dut1_if2}
+| | ${dut2_if1_pci}= | Get Interface PCI Addr | ${dut2} | ${dut2_if1}
+| | ${dut2_if2_pci}= | Get Interface PCI Addr | ${dut2} | ${dut2_if2}
+| | ${cpu_cnt}= | Evaluate | ${wt}+1
+| | ${config}= | Run keyword | Create Kubernetes VSWITCH startup config
+| | ... | node=${dut1} | cpu_cnt=${cpu_cnt} | cpu_node=${dut1_numa}
+| | ... | cpu_skip=${system_cpus} | smt_used=${False}
+| | ... | filename=/tmp/vswitch.conf | framesize=${framesize} | rxq=${rxq}
+| | ... | if1=${dut1_if1_pci} | if2=${dut1_if2_pci}
+| | ${config}= | Run keyword | Create Kubernetes VSWITCH startup config
+| | ... | node=${dut2} | cpu_cnt=${cpu_cnt} | cpu_node=${dut2_numa}
+| | ... | cpu_skip=${system_cpus} | smt_used=${False}
+| | ... | filename=/tmp/vswitch.conf | framesize=${framesize} | rxq=${rxq}
+| | ... | if1=${dut2_if1_pci} | if2=${dut2_if2_pci}
+
+| Create Kubernetes VNF'${i}' startup config on all DUTs
+| | [Documentation] | Create base startup configuration of VNF in Kubernetes
+| | ... | deploy to all DUTs.
+| | ...
+| | ${i_int}= | Convert To Integer | ${i}
+| | ${cpu_skip}= | Evaluate | ${vswitch_cpus}+${system_cpus}
+| | ${dut1_numa}= | Get interfaces numa node | ${dut1}
+| | ... | ${dut1_if1} | ${dut1_if2}
+| | ${dut2_numa}= | Get interfaces numa node | ${dut2}
+| | ... | ${dut2_if1} | ${dut2_if2}
+| | ${config}= | Run keyword | Create Kubernetes VNF startup config
+| | ... | node=${dut1} | cpu_cnt=${vnf_cpus} | cpu_node=${dut1_numa}
+| | ... | cpu_skip=${cpu_skip} | smt_used=${False} | filename=/tmp/vnf${i}.conf
+| | ... | i=${i_int}
+| | ${config}= | Run keyword | Create Kubernetes VNF startup config
+| | ... | node=${dut2} | cpu_cnt=${vnf_cpus} | cpu_node=${dut2_numa}
+| | ... | cpu_skip=${cpu_skip} | smt_used=${False} | filename=/tmp/vnf${i}.conf
+| | ... | i=${i_int}
+
+| L2 Bridge Domain Binary Search
+| | [Arguments] | ${framesize} | ${min_rate} | ${wt} | ${rxq} | ${search_type}
+| | Set Test Variable | ${framesize}
+| | Set Test Variable | ${min_rate}
+| | ${get_framesize}= | Set Variable If
+| | ... | "${framesize}" == "IMIX_v4_1" | ${avg_imix_framesize} | ${framesize}
+| | ${max_rate}= | Calculate pps | ${s_limit} | ${get_framesize}
+| | ${binary_min}= | Set Variable | ${min_rate}
+| | ${binary_max}= | Set Variable | ${max_rate}
+| | ${threshold}= | Set Variable | ${min_rate}
+| | ${dut1_if1_name}= | Get interface name | ${dut1} | ${dut1_if1}
+| | ${dut1_if2_name}= | Get interface name | ${dut1} | ${dut1_if2}
+| | ${dut2_if1_name}= | Get interface name | ${dut2} | ${dut2_if1}
+| | ${dut2_if2_name}= | Get interface name | ${dut2} | ${dut2_if2}
+| | Create Kubernetes VSWITCH startup config on all DUTs | ${get_framesize}
+| | ... | ${wt} | ${rxq}
+| | Create Kubernetes VNF'1' startup config on all DUTs
+| | Create Kubernetes VNF'2' startup config on all DUTs
+| | Create Kubernetes VNF'3' startup config on all DUTs
+| | Create Kubernetes VNF'4' startup config on all DUTs
+| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit
+| | ... | name=vswitch-vpp-cfg | vpp.conf=/tmp/vswitch.conf
+| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit
+| | ... | name=vnf1-vpp-cfg | vpp.conf=/tmp/vnf1.conf
+| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit
+| | ... | name=vnf2-vpp-cfg | vpp.conf=/tmp/vnf2.conf
+| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit
+| | ... | name=vnf3-vpp-cfg | vpp.conf=/tmp/vnf3.conf
+| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit
+| | ... | name=vnf4-vpp-cfg | vpp.conf=/tmp/vnf4.conf
+| | Apply Kubernetes resource on node | ${dut1}
+| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf1
+| | Apply Kubernetes resource on node | ${dut2}
+| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf1
+| | Apply Kubernetes resource on node | ${dut1}
+| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf2
+| | Apply Kubernetes resource on node | ${dut2}
+| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf2
+| | Apply Kubernetes resource on node | ${dut1}
+| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf3
+| | Apply Kubernetes resource on node | ${dut2}
+| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf3
+| | Apply Kubernetes resource on node | ${dut1}
+| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf4
+| | Apply Kubernetes resource on node | ${dut2}
+| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf4
+| | Apply Kubernetes resource on node | ${dut1}
+| | ... | ${sfc_profile}.yaml | $$TEST_NAME$$=${TEST NAME}
+| | ... | $$VSWITCH_IF1$$=${dut1_if1_name}
+| | ... | $$VSWITCH_IF2$$=${dut1_if2_name}
+| | Apply Kubernetes resource on node | ${dut2}
+| | ... | ${sfc_profile}.yaml | $$TEST_NAME$$=${TEST NAME}
+| | ... | $$VSWITCH_IF1$$=${dut2_if1_name}
+| | ... | $$VSWITCH_IF2$$=${dut2_if2_name}
+| | Wait for Kubernetes PODs on all DUTs | ${nodes} | csit
+| | Set Kubernetes PODs affinity on all DUTs | ${nodes}
+| | Run Keyword If | '${search_type}' == 'NDR'
+| | ... | Find NDR using binary search and pps
+| | ... | ${framesize} | ${binary_min} | ${binary_max} | ${traffic_profile}
+| | ... | ${min_rate} | ${max_rate} | ${threshold}
+| | ... | ELSE IF | '${search_type}' == 'PDR'
+| | ... | Find PDR using binary search and pps
+| | ... | ${framesize} | ${binary_min} | ${binary_max} | ${traffic_profile}
+| | ... | ${min_rate} | ${max_rate} | ${threshold}
+| | ... | ${perf_pdr_loss_acceptance} | ${perf_pdr_loss_acceptance_type}
+
+*** Test Cases ***
+| tc01-64B-1t1c-ho-eth-1drcl2bdbasemaclrn-eth-2memif-4drcl2xc-k8s-ndrdisc
+| | [Documentation]
+| | ... | [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core,\
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\
+| | ... | linerate, step 100kpps.
+| | ...
+| | [Tags] | 64B | 1T1C | STHREAD | NDRDISC
+| | [Template] | L2 Bridge Domain Binary Search
+| | framesize=${64} | min_rate=${100000} | wt=1 | rxq=1 | search_type=NDR
+
+| tc02-64B-1t1c-ho-eth-1drcl2bdbasemaclrn-eth-2memif-4drcl2xc-k8s-pdrdisc
+| | [Documentation]
+| | ... | [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core,\
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\
+| | ... | linerate, step 100kpps, LT=0.5%.
+| | ...
+| | [Tags] | 64B | 1T1C | STHREAD | PDRDISC | SKIP_PATCH
+| | [Template] | L2 Bridge Domain Binary Search
+| | framesize=${64} | min_rate=${100000} | wt=1 | rxq=1 | search_type=PDR
+
+| tc03-IMIX-1t1c-ho-eth-1drcl2bdbasemaclrn-eth-2memif-4drcl2xc-k8s-ndrdisc
+| | [Documentation]
+| | ... | [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core,\
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Find NDR for IMIX_v4_1 frames using binary search start at 10GE\
+| | ... | linerate, step 10kpps.
+| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B)
+| | ...
+| | [Tags] | IMIX | 1T1C | STHREAD | NDRDISC
+| | [Template] | L2 Bridge Domain Binary Search
+| | framesize=IMIX_v4_1 | min_rate=${10000} | wt=1 | rxq=1 | search_type=NDR
+
+| tc04-IMIX-1t1c-ho-eth-1drcl2bdbasemaclrn-eth-2memif-4drcl2xc-k8s-pdrdisc
+| | [Documentation]
+| | ... | [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core,\
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Find PDR for IMIX_v4_1 frames using binary search start at 10GE\
+| | ... | linerate, step 10kpps, LT=0.5%.
+| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B)
+| | ...
+| | [Tags] | IMIX | 1T1C | STHREAD | PDRDISC | SKIP_PATCH
+| | [Template] | L2 Bridge Domain Binary Search
+| | framesize=IMIX_v4_1 | min_rate=${10000} | wt=1 | rxq=1 | search_type=PDR
+
+| tc05-1518B-1t1c-ho-eth-1drcl2bdbasemaclrn-eth-2memif-4drcl2xc-k8s-ndrdisc
+| | [Documentation]
+| | ... | [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core,\
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\
+| | ... | linerate, step 10kpps.
+| | ...
+| | [Tags] | 1518B | 1T1C | STHREAD | NDRDISC
+| | [Template] | L2 Bridge Domain Binary Search
+| | framesize=${1518} | min_rate=${10000} | wt=1 | rxq=1 | search_type=NDR
+
+| tc06-1518B-1t1c-ho-eth-1drcl2bdbasemaclrn-eth-2memif-4drcl2xc-k8s-pdrdisc
+| | [Documentation]
+| | ... | [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core,\
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\
+| | ... | linerate, step 10kpps, LT=0.5%.
+| | ...
+| | [Tags] | 1518B | 1T1C | STHREAD | PDRDISC | SKIP_PATCH
+| | [Template] | L2 Bridge Domain Binary Search
+| | framesize=${1518} | min_rate=${10000} | wt=1 | rxq=1 | search_type=PDR
+
+| tc07-64B-2t2c-ho-eth-1drcl2bdbasemaclrn-eth-2memif-4drcl2xc-k8s-ndrdisc
+| | [Documentation]
+| | ... | [Cfg] DUT runs L2BD switching config with 2 thread, 2 phy core,\
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\
+| | ... | linerate, step 100kpps.
+| | ...
+| | [Tags] | 64B | 2T2C | MTHREAD | NDRDISC
+| | [Template] | L2 Bridge Domain Binary Search
+| | framesize=${64} | min_rate=${100000} | wt=2 | rxq=1 | search_type=NDR
+
+| tc08-64B-2t2c-ho-eth-1drcl2bdbasemaclrn-eth-2memif-4drcl2xc-k8s-pdrdisc
+| | [Documentation]
+| | ... | [Cfg] DUT runs L2BD switching config with 2 thread, 2 phy core,\
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\
+| | ... | linerate, step 100kpps, LT=0.5%.
+| | ...
+| | [Tags] | 64B | 2T2C | MTHREAD | PDRDISC | SKIP_PATCH
+| | [Template] | L2 Bridge Domain Binary Search
+| | framesize=${64} | min_rate=${100000} | wt=2 | rxq=1 | search_type=PDR
+
+| tc09-IMIX-2t2c-ho-eth-1drcl2bdbasemaclrn-eth-2memif-4drcl2xc-k8s-ndrdisc
+| | [Documentation]
+| | ... | [Cfg] DUT runs L2BD switching config with 2 thread, 2 phy core,\
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Find NDR for IMIX_v4_1 frames using binary search start at 10GE\
+| | ... | linerate, step 10kpps.
+| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B)
+| | ...
+| | [Tags] | IMIX | 2T2C | MTHREAD | NDRDISC | SKIP_PATCH
+| | [Template] | L2 Bridge Domain Binary Search
+| | framesize=IMIX_v4_1 | min_rate=${10000} | wt=2 | rxq=1 | search_type=NDR
+
+| tc10-IMIX-2t2c-ho-eth-1drcl2bdbasemaclrn-eth-2memif-4drcl2xc-k8s-pdrdisc
+| | [Documentation]
+| | ... | [Cfg] DUT runs L2BD switching config with 2 thread, 1 phy core,\
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Find PDR for IMIX_v4_1 frames using binary search start at 10GE\
+| | ... | linerate, step 10kpps, LT=0.5%.
+| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B)
+| | ...
+| | [Tags] | IMIX | 2T2C | MTHREAD | PDRDISC | SKIP_PATCH
+| | [Template] | L2 Bridge Domain Binary Search
+| | framesize=IMIX_v4_1 | min_rate=${10000} | wt=2 | rxq=1 | search_type=PDR
+
+| tc11-1518B-2t2c-ho-eth-1drcl2bdbasemaclrn-eth-2memif-4drcl2xc-k8s-ndrdisc
+| | [Documentation]
+| | ... | [Cfg] DUT runs L2BD switching config with 2 thread, 1 phy core,\
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\
+| | ... | linerate, step 10kpps.
+| | ...
+| | [Tags] | 1518B | 2T2C | MTHREAD | NDRDISC | SKIP_PATCH
+| | [Template] | L2 Bridge Domain Binary Search
+| | framesize=${1518} | min_rate=${10000} | wt=2 | rxq=1 | search_type=NDR
+
+| tc12-1518B-2t2c-ho-eth-1drcl2bdbasemaclrn-eth-2memif-4drcl2xc-k8s-pdrdisc
+| | [Documentation]
+| | ... | [Cfg] DUT runs L2BD switching config with 2 thread, 1 phy core,\
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\
+| | ... | linerate, step 10kpps, LT=0.5%.
+| | ...
+| | [Tags] | 1518B | 2T2C | MTHREAD | PDRDISC | SKIP_PATCH
+| | [Template] | L2 Bridge Domain Binary Search
+| | framesize=${1518} | min_rate=${10000} | wt=2 | rxq=1 | search_type=PDR
diff --git a/tests/kubernetes/perf/container_memif/10ge2p1x520-ho-eth-1drcl2xcbase-eth-2memif-2drcl2xc-k8s-ndrpdrdisc.robot b/tests/kubernetes/perf/container_memif/10ge2p1x520-ho-eth-1drcl2xcbase-eth-2memif-2drcl2xc-k8s-ndrpdrdisc.robot
new file mode 100644
index 0000000000..c614b265b7
--- /dev/null
+++ b/tests/kubernetes/perf/container_memif/10ge2p1x520-ho-eth-1drcl2xcbase-eth-2memif-2drcl2xc-k8s-ndrpdrdisc.robot
@@ -0,0 +1,309 @@
+# Copyright (c) 2017 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/performance/performance_setup.robot
+| ...
+| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDRDISC
+| ... | NIC_Intel-X520-DA2 | ETH | L2XCFWD | SCALE | L2XCBASE | MEMIF
+| ... | K8S | 1VSWITCH | 2VNF | VPP_AGENT | SFC_CONTROLLER | HORIZONTAL
+| ...
+| Suite Setup | Set up 3-node performance topology with DUT's NIC model
+| ... | L2 | Intel-X520-DA2
+| ...
+| Test Setup | Set up performance test with Ligato Kubernetes
+| ...
+| Suite Teardown | Tear down 3-node performance topology
+| ...
+| Test Teardown | Tear down performance test with Ligato Kubernetes
+| ...
+| Documentation | *RFC2544: Pkt throughput L2XC test cases*
+| ...
+| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
+| ... | with single links between nodes.
+| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 cross connect.
+| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 cross-
+| ... | connect. DUT1 and DUT2 tested with 2p10GE NIC X520 Niantic by Intel.
+| ... | VNF Containers are connected to VSWITCH container via Memif interface.
+| ... | All containers are running same VPP version. Containers are deployed
+| ... | with Kubernetes. Configuration is applied by vnf-agent.
+| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop
+| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop
+| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage
+| ... | of packets transmitted. NDR and PDR are discovered for different
+| ... | Ethernet L2 frame sizes using either binary search or linear search
+| ... | algorithms with configured starting rate and final step that determines
+| ... | throughput measurement resolution. Test packets are generated by TG on
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups
+| ... | (flow-group per direction, 253 flows per flow-group) with all packets
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static
+| ... | payload. MAC addresses are matching MAC addresses of the TG node
+| ... | interfaces.
+| ... | *[Ref] Applicable standard specifications:* RFC2544.
+
+*** Variables ***
+| ${avg_imix_framesize}= | ${357.833}
+# X520-DA2 bandwidth limit
+| ${s_limit} | ${10000000000}
+# SFC profile
+| ${sfc_profile} | configmaps/ho-eth-1drcl2xcbase-eth-2memif-2drcl2xc
+# Traffic profile:
+| ${traffic_profile} | trex-sl-3n-ethip4-ip4src254
+# CPU settings
+| ${system_cpus}= | ${1}
+| ${vswitch_cpus}= | ${5}
+| ${vnf_cpus}= | ${2}
+
+*** Keywords ***
+| Create Kubernetes VSWITCH startup config on all DUTs
+| | [Documentation] | Create base startup configuration of VSWITCH in Kubernetes
+| | ... | deploy to all DUTs.
+| | ...
+| | ... | *Arguments:*
+| | ... | - ${framesize} - L2 framesize. Type: integer
+| | ... | - ${wt} - Worker threads. Type: integer
+| | ... | - ${rxq} - RX queues. Type: integer
+| | ...
+| | ... | *Example:*
+| | ...
+| | ... | \| Create Kubernetes VSWITCH startup config on all DUTs \| ${64} \
+| | ... | \| ${1} \| ${1}
+| | ...
+| | [Arguments] | ${framesize} | ${wt} | ${rxq}
+| | ${dut1_numa}= | Get interfaces numa node | ${dut1}
+| | ... | ${dut1_if1} | ${dut1_if2}
+| | ${dut2_numa}= | Get interfaces numa node | ${dut2}
+| | ... | ${dut2_if1} | ${dut2_if2}
+| | ${dut1_if1_pci}= | Get Interface PCI Addr | ${dut1} | ${dut1_if1}
+| | ${dut1_if2_pci}= | Get Interface PCI Addr | ${dut1} | ${dut1_if2}
+| | ${dut2_if1_pci}= | Get Interface PCI Addr | ${dut2} | ${dut2_if1}
+| | ${dut2_if2_pci}= | Get Interface PCI Addr | ${dut2} | ${dut2_if2}
+| | ${cpu_cnt}= | Evaluate | ${wt}+1
+| | ${config}= | Run keyword | Create Kubernetes VSWITCH startup config
+| | ... | node=${dut1} | cpu_cnt=${cpu_cnt} | cpu_node=${dut1_numa}
+| | ... | cpu_skip=${system_cpus} | smt_used=${False}
+| | ... | filename=/tmp/vswitch.conf | framesize=${framesize} | rxq=${rxq}
+| | ... | if1=${dut1_if1_pci} | if2=${dut1_if2_pci}
+| | ${config}= | Run keyword | Create Kubernetes VSWITCH startup config
+| | ... | node=${dut2} | cpu_cnt=${cpu_cnt} | cpu_node=${dut2_numa}
+| | ... | cpu_skip=${system_cpus} | smt_used=${False}
+| | ... | filename=/tmp/vswitch.conf | framesize=${framesize} | rxq=${rxq}
+| | ... | if1=${dut2_if1_pci} | if2=${dut2_if2_pci}
+
+| Create Kubernetes VNF'${i}' startup config on all DUTs
+| | [Documentation] | Create base startup configuration of VNF in Kubernetes
+| | ... | deploy to all DUTs.
+| | ...
+| | ${i_int}= | Convert To Integer | ${i}
+| | ${cpu_skip}= | Evaluate | ${vswitch_cpus}+${system_cpus}
+| | ${dut1_numa}= | Get interfaces numa node | ${dut1}
+| | ... | ${dut1_if1} | ${dut1_if2}
+| | ${dut2_numa}= | Get interfaces numa node | ${dut2}
+| | ... | ${dut2_if1} | ${dut2_if2}
+| | ${config}= | Run keyword | Create Kubernetes VNF startup config
+| | ... | node=${dut1} | cpu_cnt=${vnf_cpus} | cpu_node=${dut1_numa}
+| | ... | cpu_skip=${cpu_skip} | smt_used=${False} | filename=/tmp/vnf${i}.conf
+| | ... | i=${i_int}
+| | ${config}= | Run keyword | Create Kubernetes VNF startup config
+| | ... | node=${dut2} | cpu_cnt=${vnf_cpus} | cpu_node=${dut2_numa}
+| | ... | cpu_skip=${cpu_skip} | smt_used=${False} | filename=/tmp/vnf${i}.conf
+| | ... | i=${i_int}
+
+| L2 Cross Connect Binary Search
+| | [Arguments] | ${framesize} | ${min_rate} | ${wt} | ${rxq} | ${search_type}
+| | Set Test Variable | ${framesize}
+| | Set Test Variable | ${min_rate}
+| | ${get_framesize}= | Set Variable If
+| | ... | "${framesize}" == "IMIX_v4_1" | ${avg_imix_framesize} | ${framesize}
+| | ${max_rate}= | Calculate pps | ${s_limit} | ${get_framesize}
+| | ${binary_min}= | Set Variable | ${min_rate}
+| | ${binary_max}= | Set Variable | ${max_rate}
+| | ${threshold}= | Set Variable | ${min_rate}
+| | ${dut1_if1_name}= | Get interface name | ${dut1} | ${dut1_if1}
+| | ${dut1_if2_name}= | Get interface name | ${dut1} | ${dut1_if2}
+| | ${dut2_if1_name}= | Get interface name | ${dut2} | ${dut2_if1}
+| | ${dut2_if2_name}= | Get interface name | ${dut2} | ${dut2_if2}
+| | Create Kubernetes VSWITCH startup config on all DUTs | ${get_framesize}
+| | ... | ${wt} | ${rxq}
+| | Create Kubernetes VNF'1' startup config on all DUTs
+| | Create Kubernetes VNF'2' startup config on all DUTs
+| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit
+| | ... | name=vswitch-vpp-cfg | vpp.conf=/tmp/vswitch.conf
+| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit
+| | ... | name=vnf1-vpp-cfg | vpp.conf=/tmp/vnf1.conf
+| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit
+| | ... | name=vnf2-vpp-cfg | vpp.conf=/tmp/vnf2.conf
+| | Apply Kubernetes resource on node | ${dut1}
+| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf1
+| | Apply Kubernetes resource on node | ${dut2}
+| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf1
+| | Apply Kubernetes resource on node | ${dut1}
+| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf2
+| | Apply Kubernetes resource on node | ${dut2}
+| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf2
+| | Apply Kubernetes resource on node | ${dut1}
+| | ... | ${sfc_profile}.yaml | $$TEST_NAME$$=${TEST NAME}
+| | ... | $$VSWITCH_IF1$$=${dut1_if1_name}
+| | ... | $$VSWITCH_IF2$$=${dut1_if2_name}
+| | Apply Kubernetes resource on node | ${dut2}
+| | ... | ${sfc_profile}.yaml | $$TEST_NAME$$=${TEST NAME}
+| | ... | $$VSWITCH_IF1$$=${dut2_if1_name}
+| | ... | $$VSWITCH_IF2$$=${dut2_if2_name}
+| | Wait for Kubernetes PODs on all DUTs | ${nodes} | csit
+| | Set Kubernetes PODs affinity on all DUTs | ${nodes}
+| | Run Keyword If | '${search_type}' == 'NDR'
+| | ... | Find NDR using binary search and pps
+| | ... | ${framesize} | ${binary_min} | ${binary_max} | ${traffic_profile}
+| | ... | ${min_rate} | ${max_rate} | ${threshold}
+| | ... | ELSE IF | '${search_type}' == 'PDR'
+| | ... | Find PDR using binary search and pps
+| | ... | ${framesize} | ${binary_min} | ${binary_max} | ${traffic_profile}
+| | ... | ${min_rate} | ${max_rate} | ${threshold}
+| | ... | ${perf_pdr_loss_acceptance} | ${perf_pdr_loss_acceptance_type}
+
+*** Test Cases ***
+| tc01-64B-1t1c-ho-eth-1drcl2xcbase-eth-2memif-2drcl2xc-k8s-ndrdisc
+| | [Documentation]
+| | ... | [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core,\
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\
+| | ... | linerate, step 100kpps.
+| | ...
+| | [Tags] | 64B | 1T1C | STHREAD | NDRDISC
+| | [Template] | L2 Cross Connect Binary Search
+| | framesize=${64} | min_rate=${100000} | wt=1 | rxq=1 | search_type=NDR
+
+| tc02-64B-1t1c-ho-eth-1drcl2xcbase-eth-2memif-2drcl2xc-k8s-pdrdisc
+| | [Documentation]
+| | ... | [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core,\
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\
+| | ... | linerate, step 100kpps, LT=0.5%.
+| | ...
+| | [Tags] | 64B | 1T1C | STHREAD | PDRDISC | SKIP_PATCH
+| | [Template] | L2 Cross Connect Binary Search
+| | framesize=${64} | min_rate=${100000} | wt=1 | rxq=1 | search_type=PDR
+
+| tc03-IMIX-1t1c-ho-eth-1drcl2xcbase-eth-2memif-2drcl2xc-k8s-ndrdisc
+| | [Documentation]
+| | ... | [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core,\
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Find NDR for IMIX_v4_1 frames using binary search start at 10GE\
+| | ... | linerate, step 10kpps.
+| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B)
+| | ...
+| | [Tags] | IMIX | 1T1C | STHREAD | NDRDISC
+| | [Template] | L2 Cross Connect Binary Search
+| | framesize=IMIX_v4_1 | min_rate=${10000} | wt=1 | rxq=1 | search_type=NDR
+
+| tc04-IMIX-1t1c-ho-eth-1drcl2xcbase-eth-2memif-2drcl2xc-k8s-pdrdisc
+| | [Documentation]
+| | ... | [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core,\
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Find PDR for IMIX_v4_1 frames using binary search start at 10GE\
+| | ... | linerate, step 10kpps, LT=0.5%.
+| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B)
+| | ...
+| | [Tags] | IMIX | 1T1C | STHREAD | PDRDISC | SKIP_PATCH
+| | [Template] | L2 Cross Connect Binary Search
+| | framesize=IMIX_v4_1 | min_rate=${10000} | wt=1 | rxq=1 | search_type=PDR
+
+| tc05-1518B-1t1c-ho-eth-1drcl2xcbase-eth-2memif-2drcl2xc-k8s-ndrdisc
+| | [Documentation]
+| | ... | [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core,\
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\
+| | ... | linerate, step 10kpps.
+| | ...
+| | [Tags] | 1518B | 1T1C | STHREAD | NDRDISC
+| | [Template] | L2 Cross Connect Binary Search
+| | framesize=${1518} | min_rate=${10000} | wt=1 | rxq=1 | search_type=NDR
+
+| tc06-1518B-1t1c-ho-eth-1drcl2xcbase-eth-2memif-2drcl2xc-k8s-pdrdisc
+| | [Documentation]
+| | ... | [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core,\
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\
+| | ... | linerate, step 10kpps, LT=0.5%.
+| | ...
+| | [Tags] | 1518B | 1T1C | STHREAD | PDRDISC | SKIP_PATCH
+| | [Template] | L2 Cross Connect Binary Search
+| | framesize=${1518} | min_rate=${10000} | wt=1 | rxq=1 | search_type=PDR
+
+| tc07-64B-2t2c-ho-eth-1drcl2xcbase-eth-2memif-2drcl2xc-k8s-ndrdisc
+| | [Documentation]
+| | ... | [Cfg] DUT runs L2XC switching config with 2 thread, 2 phy core,\
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\
+| | ... | linerate, step 100kpps.
+| | ...
+| | [Tags] | 64B | 2T2C | MTHREAD | NDRDISC
+| | [Template] | L2 Cross Connect Binary Search
+| | framesize=${64} | min_rate=${100000} | wt=2 | rxq=1 | search_type=NDR
+
+| tc08-64B-2t2c-ho-eth-1drcl2xcbase-eth-2memif-2drcl2xc-k8s-pdrdisc
+| | [Documentation]
+| | ... | [Cfg] DUT runs L2XC switching config with 2 thread, 2 phy core,\
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\
+| | ... | linerate, step 100kpps, LT=0.5%.
+| | ...
+| | [Tags] | 64B | 2T2C | MTHREAD | PDRDISC | SKIP_PATCH
+| | [Template] | L2 Cross Connect Binary Search
+| | framesize=${64} | min_rate=${100000} | wt=2 | rxq=1 | search_type=PDR
+
+| tc09-IMIX-2t2c-ho-eth-1drcl2xcbase-eth-2memif-2drcl2xc-k8s-ndrdisc
+| | [Documentation]
+| | ... | [Cfg] DUT runs L2XC switching config with 2 thread, 2 phy core,\
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Find NDR for IMIX_v4_1 frames using binary search start at 10GE\
+| | ... | linerate, step 10kpps.
+| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B)
+| | ...
+| | [Tags] | IMIX | 2T2C | MTHREAD | NDRDISC | SKIP_PATCH
+| | [Template] | L2 Cross Connect Binary Search
+| | framesize=IMIX_v4_1 | min_rate=${10000} | wt=2 | rxq=1 | search_type=NDR
+
+| tc10-IMIX-2t2c-ho-eth-1drcl2xcbase-eth-2memif-2drcl2xc-k8s-pdrdisc
+| | [Documentation]
+| | ... | [Cfg] DUT runs L2XC switching config with 2 thread, 1 phy core,\
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Find PDR for IMIX_v4_1 frames using binary search start at 10GE\
+| | ... | linerate, step 10kpps, LT=0.5%.
+| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B)
+| | ...
+| | [Tags] | IMIX | 2T2C | MTHREAD | PDRDISC | SKIP_PATCH
+| | [Template] | L2 Cross Connect Binary Search
+| | framesize=IMIX_v4_1 | min_rate=${10000} | wt=2 | rxq=1 | search_type=PDR
+
+| tc11-1518B-2t2c-ho-eth-1drcl2xcbase-eth-2memif-2drcl2xc-k8s-ndrdisc
+| | [Documentation]
+| | ... | [Cfg] DUT runs L2XC switching config with 2 thread, 1 phy core,\
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\
+| | ... | linerate, step 10kpps.
+| | ...
+| | [Tags] | 1518B | 2T2C | MTHREAD | NDRDISC | SKIP_PATCH
+| | [Template] | L2 Cross Connect Binary Search
+| | framesize=${1518} | min_rate=${10000} | wt=2 | rxq=1 | search_type=NDR
+
+| tc12-1518B-2t2c-ho-eth-1drcl2xcbase-eth-2memif-2drcl2xc-k8s-pdrdisc
+| | [Documentation]
+| | ... | [Cfg] DUT runs L2XC switching config with 2 thread, 1 phy core,\
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\
+| | ... | linerate, step 10kpps, LT=0.5%.
+| | ...
+| | [Tags] | 1518B | 2T2C | MTHREAD | PDRDISC | SKIP_PATCH
+| | [Template] | L2 Cross Connect Binary Search
+| | framesize=${1518} | min_rate=${10000} | wt=2 | rxq=1 | search_type=PDR
diff --git a/tests/kubernetes/perf/container_memif/10ge2p1x520-ho-eth-1drcl2xcbase-eth-2memif-4drcl2xc-k8s-ndrpdrdisc.robot b/tests/kubernetes/perf/container_memif/10ge2p1x520-ho-eth-1drcl2xcbase-eth-2memif-4drcl2xc-k8s-ndrpdrdisc.robot
new file mode 100644
index 0000000000..4b1f32f83c
--- /dev/null
+++ b/tests/kubernetes/perf/container_memif/10ge2p1x520-ho-eth-1drcl2xcbase-eth-2memif-4drcl2xc-k8s-ndrpdrdisc.robot
@@ -0,0 +1,323 @@
+# Copyright (c) 2017 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/performance/performance_setup.robot
+| ...
+| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDRDISC
+| ... | NIC_Intel-X520-DA2 | ETH | L2XCFWD | SCALE | L2XCBASE | MEMIF
+| ... | K8S | 1VSWITCH | 4VNF | VPP_AGENT | SFC_CONTROLLER | HORIZONTAL
+| ...
+| Suite Setup | Set up 3-node performance topology with DUT's NIC model
+| ... | L2 | Intel-X520-DA2
+| ...
+| Test Setup | Set up performance test with Ligato Kubernetes
+| ...
+| Suite Teardown | Tear down 3-node performance topology
+| ...
+| Test Teardown | Tear down performance test with Ligato Kubernetes
+| ...
+| Documentation | *RFC2544: Pkt throughput L2XC test cases*
+| ...
+| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
+| ... | with single links between nodes.
+| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 cross connect.
+| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 cross-
+| ... | connect. DUT1 and DUT2 tested with 2p10GE NIC X520 Niantic by Intel.
+| ... | VNF Containers are connected to VSWITCH container via Memif interface.
+| ... | All containers are running same VPP version. Containers are deployed
+| ... | with Kubernetes. Configuration is applied by vnf-agent.
+| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop
+| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop
+| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage
+| ... | of packets transmitted. NDR and PDR are discovered for different
+| ... | Ethernet L2 frame sizes using either binary search or linear search
+| ... | algorithms with configured starting rate and final step that determines
+| ... | throughput measurement resolution. Test packets are generated by TG on
+| ... | links to DUTs. TG traffic profile contains two L3 flow-groups
+| ... | (flow-group per direction, 253 flows per flow-group) with all packets
+| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static
+| ... | payload. MAC addresses are matching MAC addresses of the TG node
+| ... | interfaces.
+| ... | *[Ref] Applicable standard specifications:* RFC2544.
+
+*** Variables ***
+| ${avg_imix_framesize}= | ${357.833}
+# X520-DA2 bandwidth limit
+| ${s_limit} | ${10000000000}
+# SFC profile
+| ${sfc_profile} | configmaps/ho-eth-1drcl2xcbase-eth-2memif-4drcl2xc
+# Traffic profile:
+| ${traffic_profile} | trex-sl-3n-ethip4-ip4src254
+# CPU settings
+| ${system_cpus}= | ${1}
+| ${vswitch_cpus}= | ${5}
+| ${vnf_cpus}= | ${2}
+
+*** Keywords ***
+| Create Kubernetes VSWITCH startup config on all DUTs
+| | [Documentation] | Create base startup configuration of VSWITCH in Kubernetes
+| | ... | deploy to all DUTs.
+| | ...
+| | ... | *Arguments:*
+| | ... | - ${framesize} - L2 framesize. Type: integer
+| | ... | - ${wt} - Worker threads. Type: integer
+| | ... | - ${rxq} - RX queues. Type: integer
+| | ...
+| | ... | *Example:*
+| | ...
+| | ... | \| Create Kubernetes VSWITCH startup config on all DUTs \| ${64} \
+| | ... | \| ${1} \| ${1}
+| | ...
+| | [Arguments] | ${framesize} | ${wt} | ${rxq}
+| | ${dut1_numa}= | Get interfaces numa node | ${dut1}
+| | ... | ${dut1_if1} | ${dut1_if2}
+| | ${dut2_numa}= | Get interfaces numa node | ${dut2}
+| | ... | ${dut2_if1} | ${dut2_if2}
+| | ${dut1_if1_pci}= | Get Interface PCI Addr | ${dut1} | ${dut1_if1}
+| | ${dut1_if2_pci}= | Get Interface PCI Addr | ${dut1} | ${dut1_if2}
+| | ${dut2_if1_pci}= | Get Interface PCI Addr | ${dut2} | ${dut2_if1}
+| | ${dut2_if2_pci}= | Get Interface PCI Addr | ${dut2} | ${dut2_if2}
+| | ${cpu_cnt}= | Evaluate | ${wt}+1
+| | ${config}= | Run keyword | Create Kubernetes VSWITCH startup config
+| | ... | node=${dut1} | cpu_cnt=${cpu_cnt} | cpu_node=${dut1_numa}
+| | ... | cpu_skip=${system_cpus} | smt_used=${False}
+| | ... | filename=/tmp/vswitch.conf | framesize=${framesize} | rxq=${rxq}
+| | ... | if1=${dut1_if1_pci} | if2=${dut1_if2_pci}
+| | ${config}= | Run keyword | Create Kubernetes VSWITCH startup config
+| | ... | node=${dut2} | cpu_cnt=${cpu_cnt} | cpu_node=${dut2_numa}
+| | ... | cpu_skip=${system_cpus} | smt_used=${False}
+| | ... | filename=/tmp/vswitch.conf | framesize=${framesize} | rxq=${rxq}
+| | ... | if1=${dut2_if1_pci} | if2=${dut2_if2_pci}
+
+| Create Kubernetes VNF'${i}' startup config on all DUTs
+| | [Documentation] | Create base startup configuration of VNF in Kubernetes
+| | ... | deploy to all DUTs.
+| | ...
+| | ${i_int}= | Convert To Integer | ${i}
+| | ${cpu_skip}= | Evaluate | ${vswitch_cpus}+${system_cpus}
+| | ${dut1_numa}= | Get interfaces numa node | ${dut1}
+| | ... | ${dut1_if1} | ${dut1_if2}
+| | ${dut2_numa}= | Get interfaces numa node | ${dut2}
+| | ... | ${dut2_if1} | ${dut2_if2}
+| | ${config}= | Run keyword | Create Kubernetes VNF startup config
+| | ... | node=${dut1} | cpu_cnt=${vnf_cpus} | cpu_node=${dut1_numa}
+| | ... | cpu_skip=${cpu_skip} | smt_used=${False} | filename=/tmp/vnf${i}.conf
+| | ... | i=${i_int}
+| | ${config}= | Run keyword | Create Kubernetes VNF startup config
+| | ... | node=${dut2} | cpu_cnt=${vnf_cpus} | cpu_node=${dut2_numa}
+| | ... | cpu_skip=${cpu_skip} | smt_used=${False} | filename=/tmp/vnf${i}.conf
+| | ... | i=${i_int}
+
+| L2 Cross Connect Binary Search
+| | [Arguments] | ${framesize} | ${min_rate} | ${wt} | ${rxq} | ${search_type}
+| | Set Test Variable | ${framesize}
+| | Set Test Variable | ${min_rate}
+| | ${get_framesize}= | Set Variable If
+| | ... | "${framesize}" == "IMIX_v4_1" | ${avg_imix_framesize} | ${framesize}
+| | ${max_rate}= | Calculate pps | ${s_limit} | ${get_framesize}
+| | ${binary_min}= | Set Variable | ${min_rate}
+| | ${binary_max}= | Set Variable | ${max_rate}
+| | ${threshold}= | Set Variable | ${min_rate}
+| | ${dut1_if1_name}= | Get interface name | ${dut1} | ${dut1_if1}
+| | ${dut1_if2_name}= | Get interface name | ${dut1} | ${dut1_if2}
+| | ${dut2_if1_name}= | Get interface name | ${dut2} | ${dut2_if1}
+| | ${dut2_if2_name}= | Get interface name | ${dut2} | ${dut2_if2}
+| | Create Kubernetes VSWITCH startup config on all DUTs | ${get_framesize}
+| | ... | ${wt} | ${rxq}
+| | Create Kubernetes VNF'1' startup config on all DUTs
+| | Create Kubernetes VNF'2' startup config on all DUTs
+| | Create Kubernetes VNF'3' startup config on all DUTs
+| | Create Kubernetes VNF'4' startup config on all DUTs
+| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit
+| | ... | name=vswitch-vpp-cfg | vpp.conf=/tmp/vswitch.conf
+| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit
+| | ... | name=vnf1-vpp-cfg | vpp.conf=/tmp/vnf1.conf
+| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit
+| | ... | name=vnf2-vpp-cfg | vpp.conf=/tmp/vnf2.conf
+| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit
+| | ... | name=vnf3-vpp-cfg | vpp.conf=/tmp/vnf3.conf
+| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit
+| | ... | name=vnf4-vpp-cfg | vpp.conf=/tmp/vnf4.conf
+| | Apply Kubernetes resource on node | ${dut1}
+| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf1
+| | Apply Kubernetes resource on node | ${dut2}
+| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf1
+| | Apply Kubernetes resource on node | ${dut1}
+| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf2
+| | Apply Kubernetes resource on node | ${dut2}
+| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf2
+| | Apply Kubernetes resource on node | ${dut1}
+| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf3
+| | Apply Kubernetes resource on node | ${dut2}
+| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf3
+| | Apply Kubernetes resource on node | ${dut1}
+| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf4
+| | Apply Kubernetes resource on node | ${dut2}
+| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf4
+| | Apply Kubernetes resource on node | ${dut1}
+| | ... | ${sfc_profile}.yaml | $$TEST_NAME$$=${TEST NAME}
+| | ... | $$VSWITCH_IF1$$=${dut1_if1_name}
+| | ... | $$VSWITCH_IF2$$=${dut1_if2_name}
+| | Apply Kubernetes resource on node | ${dut2}
+| | ... | ${sfc_profile}.yaml | $$TEST_NAME$$=${TEST NAME}
+| | ... | $$VSWITCH_IF1$$=${dut2_if1_name}
+| | ... | $$VSWITCH_IF2$$=${dut2_if2_name}
+| | Wait for Kubernetes PODs on all DUTs | ${nodes} | csit
+| | Set Kubernetes PODs affinity on all DUTs | ${nodes}
+| | Run Keyword If | '${search_type}' == 'NDR'
+| | ... | Find NDR using binary search and pps
+| | ... | ${framesize} | ${binary_min} | ${binary_max} | ${traffic_profile}
+| | ... | ${min_rate} | ${max_rate} | ${threshold}
+| | ... | ELSE IF | '${search_type}' == 'PDR'
+| | ... | Find PDR using binary search and pps
+| | ... | ${framesize} | ${binary_min} | ${binary_max} | ${traffic_profile}
+| | ... | ${min_rate} | ${max_rate} | ${threshold}
+| | ... | ${perf_pdr_loss_acceptance} | ${perf_pdr_loss_acceptance_type}
+
+*** Test Cases ***
+| tc01-64B-1t1c-ho-eth-1drcl2xcbase-eth-2memif-4drcl2xc-k8s-ndrdisc
+| | [Documentation]
+| | ... | [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core,\
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\
+| | ... | linerate, step 100kpps.
+| | ...
+| | [Tags] | 64B | 1T1C | STHREAD | NDRDISC
+| | [Template] | L2 Cross Connect Binary Search
+| | framesize=${64} | min_rate=${100000} | wt=1 | rxq=1 | search_type=NDR
+
+| tc02-64B-1t1c-ho-eth-1drcl2xcbase-eth-2memif-4drcl2xc-k8s-pdrdisc
+| | [Documentation]
+| | ... | [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core,\
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\
+| | ... | linerate, step 100kpps, LT=0.5%.
+| | ...
+| | [Tags] | 64B | 1T1C | STHREAD | PDRDISC | SKIP_PATCH
+| | [Template] | L2 Cross Connect Binary Search
+| | framesize=${64} | min_rate=${100000} | wt=1 | rxq=1 | search_type=PDR
+
+| tc03-IMIX-1t1c-ho-eth-1drcl2xcbase-eth-2memif-4drcl2xc-k8s-ndrdisc
+| | [Documentation]
+| | ... | [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core,\
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Find NDR for IMIX_v4_1 frames using binary search start at 10GE\
+| | ... | linerate, step 10kpps.
+| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B)
+| | ...
+| | [Tags] | IMIX | 1T1C | STHREAD | NDRDISC
+| | [Template] | L2 Cross Connect Binary Search
+| | framesize=IMIX_v4_1 | min_rate=${10000} | wt=1 | rxq=1 | search_type=NDR
+
+| tc04-IMIX-1t1c-ho-eth-1drcl2xcbase-eth-2memif-4drcl2xc-k8s-pdrdisc
+| | [Documentation]
+| | ... | [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core,\
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Find PDR for IMIX_v4_1 frames using binary search start at 10GE\
+| | ... | linerate, step 10kpps, LT=0.5%.
+| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B)
+| | ...
+| | [Tags] | IMIX | 1T1C | STHREAD | PDRDISC | SKIP_PATCH
+| | [Template] | L2 Cross Connect Binary Search
+| | framesize=IMIX_v4_1 | min_rate=${10000} | wt=1 | rxq=1 | search_type=PDR
+
+| tc05-1518B-1t1c-ho-eth-1drcl2xcbase-eth-2memif-4drcl2xc-k8s-ndrdisc
+| | [Documentation]
+| | ... | [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core,\
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\
+| | ... | linerate, step 10kpps.
+| | ...
+| | [Tags] | 1518B | 1T1C | STHREAD | NDRDISC
+| | [Template] | L2 Cross Connect Binary Search
+| | framesize=${1518} | min_rate=${10000} | wt=1 | rxq=1 | search_type=NDR
+
+| tc06-1518B-1t1c-ho-eth-1drcl2xcbase-eth-2memif-4drcl2xc-k8s-pdrdisc
+| | [Documentation]
+| | ... | [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core,\
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\
+| | ... | linerate, step 10kpps, LT=0.5%.
+| | ...
+| | [Tags] | 1518B | 1T1C | STHREAD | PDRDISC | SKIP_PATCH
+| | [Template] | L2 Cross Connect Binary Search
+| | framesize=${1518} | min_rate=${10000} | wt=1 | rxq=1 | search_type=PDR
+
+| tc07-64B-2t2c-ho-eth-1drcl2xcbase-eth-2memif-4drcl2xc-k8s-ndrdisc
+| | [Documentation]
+| | ... | [Cfg] DUT runs L2XC switching config with 2 thread, 2 phy core,\
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\
+| | ... | linerate, step 100kpps.
+| | ...
+| | [Tags] | 64B | 2T2C | MTHREAD | NDRDISC
+| | [Template] | L2 Cross Connect Binary Search
+| | framesize=${64} | min_rate=${100000} | wt=2 | rxq=1 | search_type=NDR
+
+| tc08-64B-2t2c-ho-eth-1drcl2xcbase-eth-2memif-4drcl2xc-k8s-pdrdisc
+| | [Documentation]
+| | ... | [Cfg] DUT runs L2XC switching config with 2 thread, 2 phy core,\
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\
+| | ... | linerate, step 100kpps, LT=0.5%.
+| | ...
+| | [Tags] | 64B | 2T2C | MTHREAD | PDRDISC | SKIP_PATCH
+| | [Template] | L2 Cross Connect Binary Search
+| | framesize=${64} | min_rate=${100000} | wt=2 | rxq=1 | search_type=PDR
+
+| tc09-IMIX-2t2c-ho-eth-1drcl2xcbase-eth-2memif-4drcl2xc-k8s-ndrdisc
+| | [Documentation]
+| | ... | [Cfg] DUT runs L2XC switching config with 2 thread, 2 phy core,\
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Find NDR for IMIX_v4_1 frames using binary search start at 10GE\
+| | ... | linerate, step 10kpps.
+| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B)
+| | ...
+| | [Tags] | IMIX | 2T2C | MTHREAD | NDRDISC | SKIP_PATCH
+| | [Template] | L2 Cross Connect Binary Search
+| | framesize=IMIX_v4_1 | min_rate=${10000} | wt=2 | rxq=1 | search_type=NDR
+
+| tc10-IMIX-2t2c-ho-eth-1drcl2xcbase-eth-2memif-4drcl2xc-k8s-pdrdisc
+| | [Documentation]
+| | ... | [Cfg] DUT runs L2XC switching config with 2 thread, 1 phy core,\
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Find PDR for IMIX_v4_1 frames using binary search start at 10GE\
+| | ... | linerate, step 10kpps, LT=0.5%.
+| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B)
+| | ...
+| | [Tags] | IMIX | 2T2C | MTHREAD | PDRDISC | SKIP_PATCH
+| | [Template] | L2 Cross Connect Binary Search
+| | framesize=IMIX_v4_1 | min_rate=${10000} | wt=2 | rxq=1 | search_type=PDR
+
+| tc11-1518B-2t2c-ho-eth-1drcl2xcbase-eth-2memif-4drcl2xc-k8s-ndrdisc
+| | [Documentation]
+| | ... | [Cfg] DUT runs L2XC switching config with 2 thread, 1 phy core,\
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\
+| | ... | linerate, step 10kpps.
+| | ...
+| | [Tags] | 1518B | 2T2C | MTHREAD | NDRDISC | SKIP_PATCH
+| | [Template] | L2 Cross Connect Binary Search
+| | framesize=${1518} | min_rate=${10000} | wt=2 | rxq=1 | search_type=NDR
+
+| tc12-1518B-2t2c-ho-eth-1drcl2xcbase-eth-2memif-4drcl2xc-k8s-pdrdisc
+| | [Documentation]
+| | ... | [Cfg] DUT runs L2XC switching config with 2 thread, 1 phy core,\
+| | ... | 1 receive queue per NIC port.
+| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\
+| | ... | linerate, step 10kpps, LT=0.5%.
+| | ...
+| | [Tags] | 1518B | 2T2C | MTHREAD | PDRDISC | SKIP_PATCH
+| | [Template] | L2 Cross Connect Binary Search
+| | framesize=${1518} | min_rate=${10000} | wt=2 | rxq=1 | search_type=PDR
diff --git a/tests/kubernetes/perf/container_memif/10ge2p1x520-eth-1drcl2bdbasemaclrn-eth-2memif-1drcl2xc-k8s-ndrpdrdisc.robot b/tests/kubernetes/perf/container_memif/10ge2p1x520-pa-eth-1drcl2bdbasemaclrn-eth-2memif-1drcl2xc-k8s-ndrpdrdisc.robot
index c5ed51334b..9ad3597918 100644
--- a/tests/kubernetes/perf/container_memif/10ge2p1x520-eth-1drcl2bdbasemaclrn-eth-2memif-1drcl2xc-k8s-ndrpdrdisc.robot
+++ b/tests/kubernetes/perf/container_memif/10ge2p1x520-pa-eth-1drcl2bdbasemaclrn-eth-2memif-1drcl2xc-k8s-ndrpdrdisc.robot
@@ -16,21 +16,16 @@
 | ...
 | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDRDISC
 | ... | NIC_Intel-X520-DA2 | ETH | L2BDMACLRN | L2BDBASE | BASE | MEMIF
-| ... | K8S | 1VSWITCH | 1VNF | VPP_AGENT | SFC_CONTROLLER
+| ... | K8S | 1VSWITCH | 1VNF | VPP_AGENT | SFC_CONTROLLER | PARALLEL
 | ...
 | Suite Setup | Set up 3-node performance topology with DUT's NIC model
 | ... | L2 | Intel-X520-DA2
 | ...
-| Test Setup | Run Keywords
-| ... | Apply Kubernetes resource on all duts | ${nodes} | kafka.yaml
-| ... | AND | Apply Kubernetes resource on all duts | ${nodes} | etcd.yaml
+| Test Setup | Set up performance test with Ligato Kubernetes
 | ...
 | Suite Teardown | Tear down 3-node performance topology
 | ...
-| Test Teardown | Run Keywords
-| ... | Get Kubernetes logs on all DUTs | ${nodes} | AND
-| ... | Describe Kubernetes resource on all DUTs | ${nodes} | AND
-| ... | Delete Kubernetes resource on all duts | ${nodes}
+| Test Teardown | Tear down performance test with Ligato Kubernetes
 | ...
 | Documentation | *RFC2544: Pkt throughput L2BD test cases*
 | ...
@@ -61,14 +56,14 @@
 | ${avg_imix_framesize}= | ${357.833}
 # X520-DA2 bandwidth limit
 | ${s_limit} | ${10000000000}
-# Kubernetes profile
-| ${kubernetes_profile} | eth-1drcl2bdbasemaclrn-eth-2memif-1drcl2xc
+# SFC profile
+| ${sfc_profile} | configmaps/pa-eth-1drcl2bdbasemaclrn-eth-2memif-1drcl2xc
 # Traffic profile:
 | ${traffic_profile} | trex-sl-3n-ethip4-ip4src254
 # CPU settings
 | ${system_cpus}= | ${1}
 | ${vswitch_cpus}= | ${5}
-| ${vnf_cpus}= | ${3}
+| ${vnf_cpus}= | ${2}
 
 *** Keywords ***
 | Create Kubernetes VSWITCH startup config on all DUTs
@@ -139,22 +134,33 @@
 | | ${dut1_if2_name}= | Get interface name | ${dut1} | ${dut1_if2}
 | | ${dut2_if1_name}= | Get interface name | ${dut2} | ${dut2_if1}
 | | ${dut2_if2_name}= | Get interface name | ${dut2} | ${dut2_if2}
+| | ${tg_if1_mac}= | Get Interface MAC | ${tg} | ${tg_if1}
+| | ${tg_if2_mac}= | Get Interface MAC | ${tg} | ${tg_if2}
 | | Create Kubernetes VSWITCH startup config on all DUTs | ${get_framesize}
 | | ... | ${wt} | ${rxq}
 | | Create Kubernetes VNF'1' startup config on all DUTs
-| | Create Kubernetes CM from file on all DUTs | ${nodes} | name=vswitch-vpp-cfg
-| | ... | key=vpp.conf | src_file=/tmp/vswitch.conf
-| | Create Kubernetes CM from file on all DUTs | ${nodes} | name=vnf-vpp-cfg
-| | ... | key=vpp.conf | src_file=/tmp/vnf1.conf
+| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit
+| | ... | name=vswitch-vpp-cfg | vpp.conf=/tmp/vswitch.conf
+| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit
+| | ... | name=vnf1-vpp-cfg | vpp.conf=/tmp/vnf1.conf
 | | Apply Kubernetes resource on node | ${dut1}
-| | ... | ${kubernetes_profile}.yaml | $$TEST_NAME$$=${TEST NAME}
+| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf1
+| | Apply Kubernetes resource on node | ${dut2}
+| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf1
+| | Apply Kubernetes resource on node | ${dut1}
+| | ... | ${sfc_profile}.yaml | $$TEST_NAME$$=${TEST NAME}
 | | ... | $$VSWITCH_IF1$$=${dut1_if1_name}
 | | ... | $$VSWITCH_IF2$$=${dut1_if2_name}
+| | ... | $$TG_IF1_MAC1$$=${tg_if1_mac}
+| | ... | $$TG_IF2_MAC1$$=${tg_if2_mac}
 | | Apply Kubernetes resource on node | ${dut2}
-| | ... | ${kubernetes_profile}.yaml | $$TEST_NAME$$=${TEST NAME}
+| | ... | ${sfc_profile}.yaml | $$TEST_NAME$$=${TEST NAME}
 | | ... | $$VSWITCH_IF1$$=${dut2_if1_name}
 | | ... | $$VSWITCH_IF2$$=${dut2_if2_name}
-| | Wait for Kubernetes PODs on all DUTs | ${nodes}
+| | ... | $$TG_IF1_MAC1$$=${tg_if1_mac}
+| | ... | $$TG_IF2_MAC1$$=${tg_if2_mac}
+| | Wait for Kubernetes PODs on all DUTs | ${nodes} | csit
+| | Set Kubernetes PODs affinity on all DUTs | ${nodes}
 | | Run Keyword If | '${search_type}' == 'NDR'
 | | ... | Find NDR using binary search and pps
 | | ... | ${framesize} | ${binary_min} | ${binary_max} | ${traffic_profile}
@@ -166,7 +172,7 @@
 | | ... | ${perf_pdr_loss_acceptance} | ${perf_pdr_loss_acceptance_type}
 
 *** Test Cases ***
-| tc01-64B-1t1c-eth-1drcl2bdbasemaclrn-eth-2memif-1drcl2xc-k8s-ndrdisc
+| tc01-64B-1t1c-pa-eth-1drcl2bdbasemaclrn-eth-2memif-1drcl2xc-k8s-ndrdisc
 | | [Documentation]
 | | ... | [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core,\
 | | ... | 1 receive queue per NIC port.
@@ -177,7 +183,7 @@
 | | [Template] | L2 Bridge Domain Binary Search
 | | framesize=${64} | min_rate=${100000} | wt=1 | rxq=1 | search_type=NDR
 
-| tc02-64B-1t1c-eth-1drcl2bdbasemaclrn-eth-2memif-1drcl2xc-k8s-pdrdisc
+| tc02-64B-1t1c-pa-eth-1drcl2bdbasemaclrn-eth-2memif-1drcl2xc-k8s-pdrdisc
 | | [Documentation]
 | | ... | [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core,\
 | | ... | 1 receive queue per NIC port.
@@ -188,7 +194,7 @@
 | | [Template] | L2 Bridge Domain Binary Search
 | | framesize=${64} | min_rate=${100000} | wt=1 | rxq=1 | search_type=PDR
 
-| tc03-IMIX-1t1c-eth-1drcl2bdbasemaclrn-eth-2memif-1drcl2xc-k8s-ndrdisc
+| tc03-IMIX-1t1c-pa-eth-1drcl2bdbasemaclrn-eth-2memif-1drcl2xc-k8s-ndrdisc
 | | [Documentation]
 | | ... | [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core,\
 | | ... | 1 receive queue per NIC port.
@@ -200,7 +206,7 @@
 | | [Template] | L2 Bridge Domain Binary Search
 | | framesize=IMIX_v4_1 | min_rate=${10000} | wt=1 | rxq=1 | search_type=NDR
 
-| tc04-IMIX-1t1c-eth-1drcl2bdbasemaclrn-eth-2memif-1drcl2xc-k8s-pdrdisc
+| tc04-IMIX-1t1c-pa-eth-1drcl2bdbasemaclrn-eth-2memif-1drcl2xc-k8s-pdrdisc
 | | [Documentation]
 | | ... | [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core,\
 | | ... | 1 receive queue per NIC port.
@@ -212,7 +218,7 @@
 | | [Template] | L2 Bridge Domain Binary Search
 | | framesize=IMIX_v4_1 | min_rate=${10000} | wt=1 | rxq=1 | search_type=PDR
 
-| tc05-1518B-1t1c-eth-1drcl2bdbasemaclrn-eth-2memif-1drcl2xc-k8s-ndrdisc
+| tc05-1518B-1t1c-pa-eth-1drcl2bdbasemaclrn-eth-2memif-1drcl2xc-k8s-ndrdisc
 | | [Documentation]
 | | ... | [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core,\
 | | ... | 1 receive queue per NIC port.
@@ -223,7 +229,7 @@
 | | [Template] | L2 Bridge Domain Binary Search
 | | framesize=${1518} | min_rate=${10000} | wt=1 | rxq=1 | search_type=NDR
 
-| tc06-1518B-1t1c-eth-1drcl2bdbasemaclrn-eth-2memif-1drcl2xc-k8s-pdrdisc
+| tc06-1518B-1t1c-pa-eth-1drcl2bdbasemaclrn-eth-2memif-1drcl2xc-k8s-pdrdisc
 | | [Documentation]
 | | ... | [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core,\
 | | ... | 1 receive queue per NIC port.
@@ -234,7 +240,7 @@
 | | [Template] | L2 Bridge Domain Binary Search
 | | framesize=${1518} | min_rate=${10000} | wt=1 | rxq=1 | search_type=PDR
 
-| tc07-64B-2t2c-eth-1drcl2bdbasemaclrn-eth-2memif-1drcl2xc-k8s-ndrdisc
+| tc07-64B-2t2c-pa-eth-1drcl2bdbasemaclrn-eth-2memif-1drcl2xc-k8s-ndrdisc
 | | [Documentation]
 | | ... | [Cfg] DUT runs L2BD switching config with 2 thread, 2 phy core,\
 | | ... | 1 receive queue per NIC port.
@@ -245,7 +251,7 @@
 | | [Template] | L2 Bridge Domain Binary Search
 | | framesize=${64} | min_rate=${100000} | wt=2 | rxq=1 | search_type=NDR
 
-| tc08-64B-2t2c-eth-1drcl2bdbasemaclrn-eth-2memif-1drcl2xc-k8s-pdrdisc
+| tc08-64B-2t2c-pa-eth-1drcl2bdbasemaclrn-eth-2memif-1drcl2xc-k8s-pdrdisc
 | | [Documentation]
 | | ... | [Cfg] DUT runs L2BD switching config with 2 thread, 2 phy core,\
 | | ... | 1 receive queue per NIC port.
@@ -256,7 +262,7 @@
 | | [Template] | L2 Bridge Domain Binary Search
 | | framesize=${64} | min_rate=${100000} | wt=2 | rxq=1 | search_type=PDR
 
-| tc09-IMIX-2t2c-eth-1drcl2bdbasemaclrn-eth-2memif-1drcl2xc-k8s-ndrdisc
+| tc09-IMIX-2t2c-pa-eth-1drcl2bdbasemaclrn-eth-2memif-1drcl2xc-k8s-ndrdisc
 | | [Documentation]
 | | ... | [Cfg] DUT runs L2BD switching config with 2 thread, 2 phy core,\
 | | ... | 1 receive queue per NIC port.
@@ -268,7 +274,7 @@
 | | [Template] | L2 Bridge Domain Binary Search
 | | framesize=IMIX_v4_1 | min_rate=${10000} | wt=2 | rxq=1 | search_type=NDR
 
-| tc10-IMIX-2t2c-eth-1drcl2bdbasemaclrn-eth-2memif-1drcl2xc-k8s-pdrdisc
+| tc10-IMIX-2t2c-pa-eth-1drcl2bdbasemaclrn-eth-2memif-1drcl2xc-k8s-pdrdisc
 | | [Documentation]
 | | ... | [Cfg] DUT runs L2BD switching config with 2 thread, 1 phy core,\
 | | ... | 1 receive queue per NIC port.
@@ -280,7 +286,7 @@
 | | [Template] | L2 Bridge Domain Binary Search
 | | framesize=IMIX_v4_1 | min_rate=${10000} | wt=2 | rxq=1 | search_type=PDR
 
-| tc11-1518B-2t2c-eth-1drcl2bdbasemaclrn-eth-2memif-1drcl2xc-k8s-ndrdisc
+| tc11-1518B-2t2c-pa-eth-1drcl2bdbasemaclrn-eth-2memif-1drcl2xc-k8s-ndrdisc
 | | [Documentation]
 | | ... | [Cfg] DUT runs L2BD switching config with 2 thread, 1 phy core,\
 | | ... | 1 receive queue per NIC port.
@@ -291,7 +297,7 @@
 | | [Template] | L2 Bridge Domain Binary Search
 | | framesize=${1518} | min_rate=${10000} | wt=2 | rxq=1 | search_type=NDR
 
-| tc12-1518B-2t2c-eth-1drcl2bdbasemaclrn-eth-2memif-1drcl2xc-k8s-pdrdisc
+| tc12-1518B-2t2c-pa-eth-1drcl2bdbasemaclrn-eth-2memif-1drcl2xc-k8s-pdrdisc
 | | [Documentation]
 | | ... | [Cfg] DUT runs L2BD switching config with 2 thread, 1 phy core,\
 | | ... | 1 receive queue per NIC port.
diff --git a/tests/kubernetes/perf/container_memif/10ge2p1x520-eth-1drcl2xcbase-eth-2memif-1drcl2xc-k8s-ndrpdrdisc.robot b/tests/kubernetes/perf/container_memif/10ge2p1x520-pa-eth-1drcl2xcbase-eth-2memif-1drcl2xc-k8s-ndrpdrdisc.robot
index 038cb165df..4627d8de3b 100644
--- a/tests/kubernetes/perf/container_memif/10ge2p1x520-eth-1drcl2xcbase-eth-2memif-1drcl2xc-k8s-ndrpdrdisc.robot
+++ b/tests/kubernetes/perf/container_memif/10ge2p1x520-pa-eth-1drcl2xcbase-eth-2memif-1drcl2xc-k8s-ndrpdrdisc.robot
@@ -16,21 +16,16 @@
 | ...
 | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDRDISC
 | ... | NIC_Intel-X520-DA2 | ETH | L2XCFWD | BASE | L2XCBASE | MEMIF
-| ... | K8S | 1VSWITCH | 1VNF | VPP_AGENT | SFC_CONTROLLER
+| ... | K8S | 1VSWITCH | 1VNF | VPP_AGENT | SFC_CONTROLLER | PARALLEL
 | ...
 | Suite Setup | Set up 3-node performance topology with DUT's NIC model
 | ... | L2 | Intel-X520-DA2
 | ...
-| Test Setup | Run Keywords
-| ... | Apply Kubernetes resource on all duts | ${nodes} | kafka.yaml
-| ... | AND | Apply Kubernetes resource on all duts | ${nodes} | etcd.yaml
+| Test Setup | Set up performance test with Ligato Kubernetes
 | ...
 | Suite Teardown | Tear down 3-node performance topology
 | ...
-| Test Teardown | Run Keywords
-| ... | Get Kubernetes logs on all DUTs | ${nodes} | AND
-| ... | Describe Kubernetes resource on all DUTs | ${nodes} | AND
-| ... | Delete Kubernetes resource on all duts | ${nodes}
+| Test Teardown | Tear down performance test with Ligato Kubernetes
 | ...
 | Documentation | *RFC2544: Pkt throughput L2XC test cases*
 | ...
@@ -60,14 +55,14 @@
 | ${avg_imix_framesize}= | ${357.833}
 # X520-DA2 bandwidth limit
 | ${s_limit} | ${10000000000}
-# Kubernetes profile
-| ${kubernetes_profile} | eth-1drcl2xcbase-eth-2memif-1drcl2xc
+# SFC profile
+| ${sfc_profile} | configmaps/pa-eth-1drcl2xcbase-eth-2memif-1drcl2xc
 # Traffic profile:
 | ${traffic_profile} | trex-sl-3n-ethip4-ip4src254
 # CPU settings
 | ${system_cpus}= | ${1}
 | ${vswitch_cpus}= | ${5}
-| ${vnf_cpus}= | ${3}
+| ${vnf_cpus}= | ${2}
 
 *** Keywords ***
 | Create Kubernetes VSWITCH startup config on all DUTs
@@ -141,20 +136,24 @@
 | | Create Kubernetes VSWITCH startup config on all DUTs | ${get_framesize}
 | | ... | ${wt} | ${rxq}
 | | Create Kubernetes VNF'1' startup config on all DUTs
-| | Create Kubernetes CM from file on all DUTs | ${nodes} | name=vswitch-vpp-cfg
-| | ... | key=vpp.conf | src_file=/tmp/vswitch.conf
-| | Create Kubernetes CM from file on all DUTs | ${nodes} | name=vnf-vpp-cfg
-| | ... | key=vpp.conf | src_file=/tmp/vnf1.conf
+| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit
+| | ... | name=vswitch-vpp-cfg | vpp.conf=/tmp/vswitch.conf
+| | Create Kubernetes CM from file on all DUTs | ${nodes} | csit
+| | ... | name=vnf1-vpp-cfg | vpp.conf=/tmp/vnf1.conf
 | | Apply Kubernetes resource on node | ${dut1}
-| | ... | ${kubernetes_profile}.yaml | $$TEST_NAME$$=${TEST NAME}
+| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf1
+| | Apply Kubernetes resource on node | ${dut2}
+| | ... | pods/contiv-vnf.yaml | $$VNF$$=vnf1
+| | Apply Kubernetes resource on node | ${dut1}
+| | ... | ${sfc_profile}.yaml | $$TEST_NAME$$=${TEST NAME}
 | | ... | $$VSWITCH_IF1$$=${dut1_if1_name}
 | | ... | $$VSWITCH_IF2$$=${dut1_if2_name}
 | | Apply Kubernetes resource on node | ${dut2}
-| | ... | ${kubernetes_profile}.yaml | $$TEST_NAME$$=${TEST NAME}
+| | ... | ${sfc_profile}.yaml | $$TEST_NAME$$=${TEST NAME}
 | | ... | $$VSWITCH_IF1$$=${dut2_if1_name}
 | | ... | $$VSWITCH_IF2$$=${dut2_if2_name}
-| | Wait for Kubernetes PODs on all DUTs | ${nodes}
-| | Describe Kubernetes resource on all DUTs | ${nodes}
+| | Wait for Kubernetes PODs on all DUTs | ${nodes} | csit
+| | Set Kubernetes PODs affinity on all DUTs | ${nodes}
 | | Run Keyword If | '${search_type}' == 'NDR'
 | | ... | Find NDR using binary search and pps
 | | ... | ${framesize} | ${binary_min} | ${binary_max} | ${traffic_profile}
@@ -166,7 +165,7 @@
 | | ... | ${perf_pdr_loss_acceptance} | ${perf_pdr_loss_acceptance_type}
 
 *** Test Cases ***
-| tc01-64B-1t1c-eth-1drcl2xcbase-eth-2memif-1drcl2xc-k8s-ndrdisc
+| tc01-64B-1t1c-pa-eth-1drcl2xcbase-eth-2memif-1drcl2xc-k8s-ndrdisc
 | | [Documentation]
 | | ... | [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core,\
 | | ... | 1 receive queue per NIC port.
@@ -177,7 +176,7 @@
 | | [Template] | L2 Cross Connect Binary Search
 | | framesize=${64} | min_rate=${100000} | wt=1 | rxq=1 | search_type=NDR
 
-| tc02-64B-1t1c-eth-1drcl2xcbase-eth-2memif-1drcl2xc-k8s-pdrdisc
+| tc02-64B-1t1c-pa-eth-1drcl2xcbase-eth-2memif-1drcl2xc-k8s-pdrdisc
 | | [Documentation]
 | | ... | [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core,\
 | | ... | 1 receive queue per NIC port.
@@ -188,7 +187,7 @@
 | | [Template] | L2 Cross Connect Binary Search
 | | framesize=${64} | min_rate=${100000} | wt=1 | rxq=1 | search_type=PDR
 
-| tc03-IMIX-1t1c-eth-1drcl2xcbase-eth-2memif-1drcl2xc-k8s-ndrdisc
+| tc03-IMIX-1t1c-pa-eth-1drcl2xcbase-eth-2memif-1drcl2xc-k8s-ndrdisc
 | | [Documentation]
 | | ... | [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core,\
 | | ... | 1 receive queue per NIC port.
@@ -200,7 +199,7 @@
 | | [Template] | L2 Cross Connect Binary Search
 | | framesize=IMIX_v4_1 | min_rate=${10000} | wt=1 | rxq=1 | search_type=NDR
 
-| tc04-IMIX-1t1c-eth-1drcl2xcbase-eth-2memif-1drcl2xc-k8s-pdrdisc
+| tc04-IMIX-1t1c-pa-eth-1drcl2xcbase-eth-2memif-1drcl2xc-k8s-pdrdisc
 | | [Documentation]
 | | ... | [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core,\
 | | ... | 1 receive queue per NIC port.
@@ -212,7 +211,7 @@
 | | [Template] | L2 Cross Connect Binary Search
 | | framesize=IMIX_v4_1 | min_rate=${10000} | wt=1 | rxq=1 | search_type=PDR
 
-| tc05-1518B-1t1c-eth-1drcl2xcbase-eth-2memif-1drcl2xc-k8s-ndrdisc
+| tc05-1518B-1t1c-pa-eth-1drcl2xcbase-eth-2memif-1drcl2xc-k8s-ndrdisc
 | | [Documentation]
 | | ... | [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core,\
 | | ... | 1 receive queue per NIC port.
@@ -223,7 +222,7 @@
 | | [Template] | L2 Cross Connect Binary Search
 | | framesize=${1518} | min_rate=${10000} | wt=1 | rxq=1 | search_type=NDR
 
-| tc06-1518B-1t1c-eth-1drcl2xcbase-eth-2memif-1drcl2xc-k8s-pdrdisc
+| tc06-1518B-1t1c-pa-eth-1drcl2xcbase-eth-2memif-1drcl2xc-k8s-pdrdisc
 | | [Documentation]
 | | ... | [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core,\
 | | ... | 1 receive queue per NIC port.
@@ -234,7 +233,7 @@
 | | [Template] | L2 Cross Connect Binary Search
 | | framesize=${1518} | min_rate=${10000} | wt=1 | rxq=1 | search_type=PDR
 
-| tc07-64B-2t2c-eth-1drcl2xcbase-eth-2memif-1drcl2xc-k8s-ndrdisc
+| tc07-64B-2t2c-pa-eth-1drcl2xcbase-eth-2memif-1drcl2xc-k8s-ndrdisc
 | | [Documentation]
 | | ... | [Cfg] DUT runs L2XC switching config with 2 thread, 2 phy core,\
 | | ... | 1 receive queue per NIC port.
@@ -245,7 +244,7 @@
 | | [Template] | L2 Cross Connect Binary Search
 | | framesize=${64} | min_rate=${100000} | wt=2 | rxq=1 | search_type=NDR
 
-| tc08-64B-2t2c-eth-1drcl2xcbase-eth-2memif-1drcl2xc-k8s-pdrdisc
+| tc08-64B-2t2c-pa-eth-1drcl2xcbase-eth-2memif-1drcl2xc-k8s-pdrdisc
 | | [Documentation]
 | | ... | [Cfg] DUT runs L2XC switching config with 2 thread, 2 phy core,\
 | | ... | 1 receive queue per NIC port.
@@ -256,7 +255,7 @@
 | | [Template] | L2 Cross Connect Binary Search
 | | framesize=${64} | min_rate=${100000} | wt=2 | rxq=1 | search_type=PDR
 
-| tc09-IMIX-2t2c-eth-1drcl2xcbase-eth-2memif-1drcl2xc-k8s-ndrdisc
+| tc09-IMIX-2t2c-pa-eth-1drcl2xcbase-eth-2memif-1drcl2xc-k8s-ndrdisc
 | | [Documentation]
 | | ... | [Cfg] DUT runs L2XC switching config with 2 thread, 2 phy core,\
 | | ... | 1 receive queue per NIC port.
@@ -268,7 +267,7 @@
 | | [Template] | L2 Cross Connect Binary Search
 | | framesize=IMIX_v4_1 | min_rate=${10000} | wt=2 | rxq=1 | search_type=NDR
 
-| tc10-IMIX-2t2c-eth-1drcl2xcbase-eth-2memif-1drcl2xc-k8s-pdrdisc
+| tc10-IMIX-2t2c-pa-eth-1drcl2xcbase-eth-2memif-1drcl2xc-k8s-pdrdisc
 | | [Documentation]
 | | ... | [Cfg] DUT runs L2XC switching config with 2 thread, 1 phy core,\
 | | ... | 1 receive queue per NIC port.
@@ -280,7 +279,7 @@
 | | [Template] | L2 Cross Connect Binary Search
 | | framesize=IMIX_v4_1 | min_rate=${10000} | wt=2 | rxq=1 | search_type=PDR
 
-| tc11-1518B-2t2c-eth-1drcl2xcbase-eth-2memif-1drcl2xc-k8s-ndrdisc
+| tc11-1518B-2t2c-pa-eth-1drcl2xcbase-eth-2memif-1drcl2xc-k8s-ndrdisc
 | | [Documentation]
 | | ... | [Cfg] DUT runs L2XC switching config with 2 thread, 1 phy core,\
 | | ... | 1 receive queue per NIC port.
@@ -291,7 +290,7 @@
 | | [Template] | L2 Cross Connect Binary Search
 | | framesize=${1518} | min_rate=${10000} | wt=2 | rxq=1 | search_type=NDR
 
-| tc12-1518B-2t2c-eth-1drcl2xcbase-eth-2memif-1drcl2xc-k8s-pdrdisc
+| tc12-1518B-2t2c-pa-eth-1drcl2xcbase-eth-2memif-1drcl2xc-k8s-pdrdisc
 | | [Documentation]
 | | ... | [Cfg] DUT runs L2XC switching config with 2 thread, 1 phy core,\
 | | ... | 1 receive queue per NIC port.
author	Peter Mikus <pmikus@cisco.com>	2017-12-05 14:44:32 +0100
committer	Peter Mikus <pmikus@cisco.com>	2018-01-02 19:35:55 +0000
commit	0437095f4bf958154f25a3f163f432b22fcdc743 (patch)
tree	871a2170379e66dcb34b087dade9afcb9a74dd93 /tests/kubernetes/perf/container_memif
parent	d7cf0a829cc9cc63799330b673c8c42393de2655 (diff)