Rename all container based test following name conventions

Change-Id: I84f6da2bede47e7ae35e6b4911d425d2402dbd1b
Signed-off-by: Peter Mikus <pmikus@cisco.com>

4 files changed, 0 insertions, 1218 deletions

diff --git a/tests/ligato/perf/l2/10ge2p1x520-eth-l2bdbase-eth-2memif-1vnf-ndrpdrdisc.robot b/tests/ligato/perf/l2/10ge2p1x520-eth-l2bdbase-eth-2memif-1vnf-ndrpdrdisc.robot
deleted file mode 100644
index 9cb80f28f5..0000000000
--- a/tests/ligato/perf/l2/10ge2p1x520-eth-l2bdbase-eth-2memif-1vnf-ndrpdrdisc.robot
+++ /dev/null
@@ -1,303 +0,0 @@
-# Copyright (c) 2017 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Resource | resources/libraries/robot/performance/performance_setup.robot
-| ...
-| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDRDISC
-| ... | NIC_Intel-X520-DA2 | ETH | L2BDMACLRN | BASE | MEMIF
-| ... | KUBERNETES | 1VSWITCH | 1VNF | VPP_AGENT | SFC_CONTROLLER
-| ...
-| Suite Setup | Set up 3-node performance topology with DUT's NIC model
-| ... | L2 | Intel-X520-DA2
-| ...
-| Test Setup | Run Keywords
-| ... | Apply Kubernetes resource on all duts | ${nodes} | kafka.yaml
-| ... | AND | Apply Kubernetes resource on all duts | ${nodes} | etcd.yaml
-| ...
-| Suite Teardown | Tear down 3-node performance topology
-| ...
-| Test Teardown | Run Keywords
-| ... | Get Kubernetes logs on all DUTs | ${nodes} | AND
-| ... | Describe Kubernetes resource on all DUTs | ${nodes} | AND
-| ... | Delete Kubernetes resource on all duts | ${nodes}
-| ...
-| Documentation | *RFC2544: Pkt throughput L2BD test cases*
-| ...
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with two L2
-| ... | bridge domains and MAC learning enabled. DUT1 and DUT2 tested with
-| ... | 2p10GE NIC X520 Niantic by Intel.
-| ... | VNF Container is connected to VSWITCH container via Memif interface. All
-| ... | containers is running same VPP version. Containers are deployed with
-| ... | Kubernetes. Configuration is applied by vnf-agent.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop
-| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage
-| ... | of packets transmitted. NDR and PDR are discovered for different
-| ... | Ethernet L2 frame sizes using either binary search or linear search
-| ... | algorithms with configured starting rate and final step that determines
-| ... | throughput measurement resolution. Test packets are generated by TG on
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups
-| ... | (flow-group per direction, 253 flows per flow-group) with all packets
-| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static
-| ... | payload. MAC addresses are matching MAC addresses of the TG node
-| ... | interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
-
-*** Variables ***
-| ${avg_imix_framesize}= | ${357.833}
-# X520-DA2 bandwidth limit
-| ${s_limit} | ${10000000000}
-# Kubernetes profile
-| ${kubernetes_profile} | eth-l2bdbase-eth-2memif-1vnf
-# Traffic profile:
-| ${traffic_profile} | trex-sl-3n-ethip4-ip4src254
-# CPU settings
-| ${system_cpus}= | ${1}
-| ${vswitch_cpus}= | ${5}
-| ${vnf_cpus}= | ${3}
-
-*** Keywords ***
-| Create Kubernetes VSWITCH startup config on all DUTs
-| | [Documentation] | Create base startup configuration of VSWITCH in Kubernetes
-| | ... | deploy to all DUTs.
-| | ...
-| | ... | *Arguments:*
-| | ... | - ${framesize} - L2 framesize. Type: integer
-| | ... | - ${wt} - Worker threads. Type: integer
-| | ... | - ${rxq} - RX queues. Type: integer
-| | ...
-| | ... | *Example:*
-| | ...
-| | ... | \| Create Kubernetes VSWITCH startup config on all DUTs \| ${64} \
-| | ... | \| ${1} \| ${1}
-| | ...
-| | [Arguments] | ${framesize} | ${wt} | ${rxq}
-| | ${dut1_numa}= | Get interfaces numa node | ${dut1}
-| | ... | ${dut1_if1} | ${dut1_if2}
-| | ${dut2_numa}= | Get interfaces numa node | ${dut2}
-| | ... | ${dut2_if1} | ${dut2_if2}
-| | ${dut1_if1_pci}= | Get Interface PCI Addr | ${dut1} | ${dut1_if1}
-| | ${dut1_if2_pci}= | Get Interface PCI Addr | ${dut1} | ${dut1_if2}
-| | ${dut2_if1_pci}= | Get Interface PCI Addr | ${dut2} | ${dut2_if1}
-| | ${dut2_if2_pci}= | Get Interface PCI Addr | ${dut2} | ${dut2_if2}
-| | ${cpu_cnt}= | Evaluate | ${wt}+1
-| | ${config}= | Run keyword | Create Kubernetes VSWITCH startup config
-| | ... | node=${dut1} | cpu_cnt=${cpu_cnt} | cpu_node=${dut1_numa}
-| | ... | cpu_skip=${system_cpus} | smt_used=${False}
-| | ... | filename=/tmp/vswitch.conf | framesize=${framesize} | rxq=${rxq}
-| | ... | if1=${dut1_if1_pci} | if2=${dut1_if2_pci}
-| | ${config}= | Run keyword | Create Kubernetes VSWITCH startup config
-| | ... | node=${dut2} | cpu_cnt=${cpu_cnt} | cpu_node=${dut2_numa}
-| | ... | cpu_skip=${system_cpus} | smt_used=${False}
-| | ... | filename=/tmp/vswitch.conf | framesize=${framesize} | rxq=${rxq}
-| | ... | if1=${dut2_if1_pci} | if2=${dut2_if2_pci}
-
-| Create Kubernetes VNF'${i}' startup config on all DUTs
-| | [Documentation] | Create base startup configuration of VNF in Kubernetes
-| | ... | deploy to all DUTs.
-| | ...
-| | ${i_int}= | Convert To Integer | ${i}
-| | ${cpu_skip}= | Evaluate | ${vswitch_cpus}+${system_cpus}
-| | ${dut1_numa}= | Get interfaces numa node | ${dut1}
-| | ... | ${dut1_if1} | ${dut1_if2}
-| | ${dut2_numa}= | Get interfaces numa node | ${dut2}
-| | ... | ${dut2_if1} | ${dut2_if2}
-| | ${config}= | Run keyword | Create Kubernetes VNF startup config
-| | ... | node=${dut1} | cpu_cnt=${vnf_cpus} | cpu_node=${dut1_numa}
-| | ... | cpu_skip=${cpu_skip} | smt_used=${False} | filename=/tmp/vnf${i}.conf
-| | ... | i=${i_int}
-| | ${config}= | Run keyword | Create Kubernetes VNF startup config
-| | ... | node=${dut2} | cpu_cnt=${vnf_cpus} | cpu_node=${dut2_numa}
-| | ... | cpu_skip=${cpu_skip} | smt_used=${False} | filename=/tmp/vnf${i}.conf
-| | ... | i=${i_int}
-
-| L2 Bridge Domain Binary Search
-| | [Arguments] | ${framesize} | ${min_rate} | ${wt} | ${rxq} | ${search_type}
-| | Set Test Variable | ${framesize}
-| | Set Test Variable | ${min_rate}
-| | ${get_framesize}= | Set Variable If
-| | ... | "${framesize}" == "IMIX_v4_1" | ${avg_imix_framesize} | ${framesize}
-| | ${max_rate}= | Calculate pps | ${s_limit} | ${get_framesize}
-| | ${binary_min}= | Set Variable | ${min_rate}
-| | ${binary_max}= | Set Variable | ${max_rate}
-| | ${threshold}= | Set Variable | ${min_rate}
-| | ${dut1_if1_name}= | Get interface name | ${dut1} | ${dut1_if1}
-| | ${dut1_if2_name}= | Get interface name | ${dut1} | ${dut1_if2}
-| | ${dut2_if1_name}= | Get interface name | ${dut2} | ${dut2_if1}
-| | ${dut2_if2_name}= | Get interface name | ${dut2} | ${dut2_if2}
-| | Create Kubernetes VSWITCH startup config on all DUTs | ${get_framesize}
-| | ... | ${wt} | ${rxq}
-| | Create Kubernetes VNF'1' startup config on all DUTs
-| | Create Kubernetes CM from file on all DUTs | ${nodes} | name=vswitch-vpp-cfg
-| | ... | key=vpp.conf | src_file=/tmp/vswitch.conf
-| | Create Kubernetes CM from file on all DUTs | ${nodes} | name=vnf-vpp-cfg
-| | ... | key=vpp.conf | src_file=/tmp/vnf1.conf
-| | Apply Kubernetes resource on node | ${dut1}
-| | ... | ${kubernetes_profile}.yaml | $$TEST_NAME$$=${TEST NAME}
-| | ... | $$VSWITCH_IF1$$=${dut1_if1_name}
-| | ... | $$VSWITCH_IF2$$=${dut1_if2_name}
-| | Apply Kubernetes resource on node | ${dut2}
-| | ... | ${kubernetes_profile}.yaml | $$TEST_NAME$$=${TEST NAME}
-| | ... | $$VSWITCH_IF1$$=${dut2_if1_name}
-| | ... | $$VSWITCH_IF2$$=${dut2_if2_name}
-| | Wait for Kubernetes PODs on all DUTs | ${nodes}
-| | Run Keyword If | '${search_type}' == 'NDR'
-| | ... | Find NDR using binary search and pps
-| | ... | ${framesize} | ${binary_min} | ${binary_max} | ${traffic_profile}
-| | ... | ${min_rate} | ${max_rate} | ${threshold}
-| | ... | ELSE IF | '${search_type}' == 'PDR'
-| | ... | Find PDR using binary search and pps
-| | ... | ${framesize} | ${binary_min} | ${binary_max} | ${traffic_profile}
-| | ... | ${min_rate} | ${max_rate} | ${threshold}
-| | ... | ${perf_pdr_loss_acceptance} | ${perf_pdr_loss_acceptance_type}
-
-*** Test Cases ***
-| tc01-64B-1t1c-eth-l2bdbase-eth-2memif-1vnf-kubernetes-ndrdisc
-| | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core,\
-| | ... | 1 receive queue per NIC port.
-| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\
-| | ... | linerate, step 100kpps.
-| | ...
-| | [Tags] | 64B | 1T1C | STHREAD | NDRDISC
-| | [Template] | L2 Bridge Domain Binary Search
-| | framesize=${64} | min_rate=${100000} | wt=1 | rxq=1 | search_type=NDR
-
-| tc02-64B-1t1c-eth-l2bdbase-eth-2memif-1vnf-kubernetes-pdrdisc
-| | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core,\
-| | ... | 1 receive queue per NIC port.
-| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\
-| | ... | linerate, step 100kpps, LT=0.5%.
-| | ...
-| | [Tags] | 64B | 1T1C | STHREAD | PDRDISC
-| | [Template] | L2 Bridge Domain Binary Search
-| | framesize=${64} | min_rate=${100000} | wt=1 | rxq=1 | search_type=PDR
-
-| tc03-IMIX-1t1c-eth-l2bdbase-eth-2memif-1vnf-kubernetes-ndrdisc
-| | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core,\
-| | ... | 1 receive queue per NIC port.
-| | ... | [Ver] Find NDR for IMIX_v4_1 frames using binary search start at 10GE\
-| | ... | linerate, step 10kpps.
-| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B)
-| | ...
-| | [Tags] | IMIX | 1T1C | STHREAD | NDRDISC
-| | [Template] | L2 Bridge Domain Binary Search
-| | framesize=IMIX_v4_1 | min_rate=${10000} | wt=1 | rxq=1 | search_type=NDR
-
-| tc04-IMIX-1t1c-eth-l2bdbase-eth-2memif-1vnf-kubernetes-pdrdisc
-| | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core,\
-| | ... | 1 receive queue per NIC port.
-| | ... | [Ver] Find PDR for IMIX_v4_1 frames using binary search start at 10GE\
-| | ... | linerate, step 10kpps, LT=0.5%.
-| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B)
-| | ...
-| | [Tags] | IMIX | 1T1C | STHREAD | PDRDISC
-| | [Template] | L2 Bridge Domain Binary Search
-| | framesize=IMIX_v4_1 | min_rate=${10000} | wt=1 | rxq=1 | search_type=PDR
-
-| tc05-1518B-1t1c-eth-l2bdbase-eth-2memif-1vnf-kubernetes-ndrdisc
-| | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core,\
-| | ... | 1 receive queue per NIC port.
-| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\
-| | ... | linerate, step 10kpps.
-| | ...
-| | [Tags] | 1518B | 1T1C | STHREAD | NDRDISC
-| | [Template] | L2 Bridge Domain Binary Search
-| | framesize=${1518} | min_rate=${10000} | wt=1 | rxq=1 | search_type=NDR
-
-| tc06-1518B-1t1c-eth-l2bdbase-eth-2memif-1vnf-kubernetes-pdrdisc
-| | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core,\
-| | ... | 1 receive queue per NIC port.
-| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\
-| | ... | linerate, step 10kpps, LT=0.5%.
-| | ...
-| | [Tags] | 1518B | 1T1C | STHREAD | PDRDISC
-| | [Template] | L2 Bridge Domain Binary Search
-| | framesize=${1518} | min_rate=${10000} | wt=1 | rxq=1 | search_type=PDR
-
-| tc07-64B-2t2c-eth-l2bdbase-eth-2memif-1vnf-kubernetes-ndrdisc
-| | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config with 2 thread, 2 phy core,\
-| | ... | 1 receive queue per NIC port.
-| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\
-| | ... | linerate, step 100kpps.
-| | ...
-| | [Tags] | 64B | 2T2C | MTHREAD | NDRDISC
-| | [Template] | L2 Bridge Domain Binary Search
-| | framesize=${64} | min_rate=${100000} | wt=2 | rxq=1 | search_type=NDR
-
-| tc08-64B-2t2c-eth-l2bdbase-eth-2memif-1vnf-kubernetes-pdrdisc
-| | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config with 2 thread, 2 phy core,\
-| | ... | 1 receive queue per NIC port.
-| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\
-| | ... | linerate, step 100kpps, LT=0.5%.
-| | ...
-| | [Tags] | 64B | 2T2C | MTHREAD | PDRDISC
-| | [Template] | L2 Bridge Domain Binary Search
-| | framesize=${64} | min_rate=${100000} | wt=2 | rxq=1 | search_type=PDR
-
-| tc09-IMIX-2t2c-eth-l2bdbase-eth-2memif-1vnf-kubernetes-ndrdisc
-| | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config with 2 thread, 2 phy core,\
-| | ... | 1 receive queue per NIC port.
-| | ... | [Ver] Find NDR for IMIX_v4_1 frames using binary search start at 10GE\
-| | ... | linerate, step 10kpps.
-| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B)
-| | ...
-| | [Tags] | IMIX | 2T2C | MTHREAD | NDRDISC
-| | [Template] | L2 Bridge Domain Binary Search
-| | framesize=IMIX_v4_1 | min_rate=${10000} | wt=2 | rxq=1 | search_type=NDR
-
-| tc10-IMIX-2t2c-eth-l2bdbase-eth-2memif-1vnf-kubernetes-pdrdisc
-| | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config with 2 thread, 1 phy core,\
-| | ... | 1 receive queue per NIC port.
-| | ... | [Ver] Find PDR for IMIX_v4_1 frames using binary search start at 10GE\
-| | ... | linerate, step 10kpps, LT=0.5%.
-| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B)
-| | ...
-| | [Tags] | IMIX | 2T2C | MTHREAD | PDRDISC
-| | [Template] | L2 Bridge Domain Binary Search
-| | framesize=IMIX_v4_1 | min_rate=${10000} | wt=2 | rxq=1 | search_type=PDR
-
-| tc11-1518B-2t2c-eth-l2bdbase-eth-2memif-1vnf-kubernetes-ndrdisc
-| | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config with 2 thread, 1 phy core,\
-| | ... | 1 receive queue per NIC port.
-| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\
-| | ... | linerate, step 10kpps.
-| | ...
-| | [Tags] | 1518B | 2T2C | MTHREAD | NDRDISC
-| | [Template] | L2 Bridge Domain Binary Search
-| | framesize=${1518} | min_rate=${10000} | wt=2 | rxq=1 | search_type=NDR
-
-| tc12-1518B-2t2c-eth-l2bdbase-eth-2memif-1vnf-kubernetes-pdrdisc
-| | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config with 2 thread, 1 phy core,\
-| | ... | 1 receive queue per NIC port.
-| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\
-| | ... | linerate, step 10kpps, LT=0.5%.
-| | ...
-| | [Tags] | 1518B | 2T2C | MTHREAD | PDRDISC
-| | [Template] | L2 Bridge Domain Binary Search
-| | framesize=${1518} | min_rate=${10000} | wt=2 | rxq=1 | search_type=PDR
diff --git a/tests/ligato/perf/l2/10ge2p1x520-eth-l2bdbase-eth-2memif-2vnf-ndrpdrdisc.robot b/tests/ligato/perf/l2/10ge2p1x520-eth-l2bdbase-eth-2memif-2vnf-ndrpdrdisc.robot
deleted file mode 100644
index 3224d47de4..0000000000
--- a/tests/ligato/perf/l2/10ge2p1x520-eth-l2bdbase-eth-2memif-2vnf-ndrpdrdisc.robot
+++ /dev/null
@@ -1,306 +0,0 @@
-# Copyright (c) 2017 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Resource | resources/libraries/robot/performance/performance_setup.robot
-| ...
-| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDRDISC
-| ... | NIC_Intel-X520-DA2 | ETH | L2BDMACLRN | SCALE | MEMIF
-| ... | KUBERNETES | 1VSWITCH | 2VNF | VPP_AGENT | SFC_CONTROLLER
-| ...
-| Suite Setup | Set up 3-node performance topology with DUT's NIC model
-| ... | L2 | Intel-X520-DA2
-| ...
-| Test Setup | Run Keywords
-| ... | Apply Kubernetes resource on all duts | ${nodes} | kafka.yaml
-| ... | AND | Apply Kubernetes resource on all duts | ${nodes} | etcd.yaml
-| ...
-| Suite Teardown | Tear down 3-node performance topology
-| ...
-| Test Teardown | Run Keywords
-| ... | Get Kubernetes logs on all DUTs | ${nodes} | AND
-| ... | Describe Kubernetes resource on all DUTs | ${nodes} | AND
-| ... | Delete Kubernetes resource on all duts | ${nodes}
-| ...
-| Documentation | *RFC2544: Pkt throughput L2BD test cases*
-| ...
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with two L2
-| ... | bridge domains and MAC learning enabled. DUT1 and DUT2 tested with
-| ... | 2p10GE NIC X520 Niantic by Intel.
-| ... | VNF Containers are connected to VSWITCH container via Memif interface.
-| ... | All containers are running same VPP version. Containers are deployed
-| ... | with Kubernetes. Configuration is applied by vnf-agent.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop
-| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage
-| ... | of packets transmitted. NDR and PDR are discovered for different
-| ... | Ethernet L2 frame sizes using either binary search or linear search
-| ... | algorithms with configured starting rate and final step that determines
-| ... | throughput measurement resolution. Test packets are generated by TG on
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups
-| ... | (flow-group per direction, 253 flows per flow-group) with all packets
-| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static
-| ... | payload. MAC addresses are matching MAC addresses of the TG node
-| ... | interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
-
-*** Variables ***
-| ${avg_imix_framesize}= | ${357.833}
-# X520-DA2 bandwidth limit
-| ${s_limit} | ${10000000000}
-# Kubernetes profile
-| ${kubernetes_profile} | eth-l2bdbase-eth-2memif-2vnf
-# Traffic profile:
-| ${traffic_profile} | trex-sl-3n-ethip4-ip4src254
-# CPU settings
-| ${system_cpus}= | ${1}
-| ${vswitch_cpus}= | ${5}
-| ${vnf_cpus}= | ${3}
-
-*** Keywords ***
-| Create Kubernetes VSWITCH startup config on all DUTs
-| | [Documentation] | Create base startup configuration of VSWITCH in Kubernetes
-| | ... | deploy to all DUTs.
-| | ...
-| | ... | *Arguments:*
-| | ... | - ${framesize} - L2 framesize. Type: integer
-| | ... | - ${wt} - Worker threads. Type: integer
-| | ... | - ${rxq} - RX queues. Type: integer
-| | ...
-| | ... | *Example:*
-| | ...
-| | ... | \| Create Kubernetes VSWITCH startup config on all DUTs \| ${64} \
-| | ... | \| ${1} \| ${1}
-| | ...
-| | [Arguments] | ${framesize} | ${wt} | ${rxq}
-| | ${dut1_numa}= | Get interfaces numa node | ${dut1}
-| | ... | ${dut1_if1} | ${dut1_if2}
-| | ${dut2_numa}= | Get interfaces numa node | ${dut2}
-| | ... | ${dut2_if1} | ${dut2_if2}
-| | ${dut1_if1_pci}= | Get Interface PCI Addr | ${dut1} | ${dut1_if1}
-| | ${dut1_if2_pci}= | Get Interface PCI Addr | ${dut1} | ${dut1_if2}
-| | ${dut2_if1_pci}= | Get Interface PCI Addr | ${dut2} | ${dut2_if1}
-| | ${dut2_if2_pci}= | Get Interface PCI Addr | ${dut2} | ${dut2_if2}
-| | ${cpu_cnt}= | Evaluate | ${wt}+1
-| | ${config}= | Run keyword | Create Kubernetes VSWITCH startup config
-| | ... | node=${dut1} | cpu_cnt=${cpu_cnt} | cpu_node=${dut1_numa}
-| | ... | cpu_skip=${system_cpus} | smt_used=${False}
-| | ... | filename=/tmp/vswitch.conf | framesize=${framesize} | rxq=${rxq}
-| | ... | if1=${dut1_if1_pci} | if2=${dut1_if2_pci}
-| | ${config}= | Run keyword | Create Kubernetes VSWITCH startup config
-| | ... | node=${dut2} | cpu_cnt=${cpu_cnt} | cpu_node=${dut2_numa}
-| | ... | cpu_skip=${system_cpus} | smt_used=${False}
-| | ... | filename=/tmp/vswitch.conf | framesize=${framesize} | rxq=${rxq}
-| | ... | if1=${dut2_if1_pci} | if2=${dut2_if2_pci}
-
-| Create Kubernetes VNF'${i}' startup config on all DUTs
-| | [Documentation] | Create base startup configuration of VNF in Kubernetes
-| | ... | deploy to all DUTs.
-| | ...
-| | ${i_int}= | Convert To Integer | ${i}
-| | ${cpu_skip}= | Evaluate | ${vswitch_cpus}+${system_cpus}
-| | ${dut1_numa}= | Get interfaces numa node | ${dut1}
-| | ... | ${dut1_if1} | ${dut1_if2}
-| | ${dut2_numa}= | Get interfaces numa node | ${dut2}
-| | ... | ${dut2_if1} | ${dut2_if2}
-| | ${config}= | Run keyword | Create Kubernetes VNF startup config
-| | ... | node=${dut1} | cpu_cnt=${vnf_cpus} | cpu_node=${dut1_numa}
-| | ... | cpu_skip=${cpu_skip} | smt_used=${False} | filename=/tmp/vnf${i}.conf
-| | ... | i=${i_int}
-| | ${config}= | Run keyword | Create Kubernetes VNF startup config
-| | ... | node=${dut2} | cpu_cnt=${vnf_cpus} | cpu_node=${dut2_numa}
-| | ... | cpu_skip=${cpu_skip} | smt_used=${False} | filename=/tmp/vnf${i}.conf
-| | ... | i=${i_int}
-
-| L2 Bridge Domain Binary Search
-| | [Arguments] | ${framesize} | ${min_rate} | ${wt} | ${rxq} | ${search_type}
-| | Set Test Variable | ${framesize}
-| | Set Test Variable | ${min_rate}
-| | ${get_framesize}= | Set Variable If
-| | ... | "${framesize}" == "IMIX_v4_1" | ${avg_imix_framesize} | ${framesize}
-| | ${max_rate}= | Calculate pps | ${s_limit} | ${get_framesize}
-| | ${binary_min}= | Set Variable | ${min_rate}
-| | ${binary_max}= | Set Variable | ${max_rate}
-| | ${threshold}= | Set Variable | ${min_rate}
-| | ${dut1_if1_name}= | Get interface name | ${dut1} | ${dut1_if1}
-| | ${dut1_if2_name}= | Get interface name | ${dut1} | ${dut1_if2}
-| | ${dut2_if1_name}= | Get interface name | ${dut2} | ${dut2_if1}
-| | ${dut2_if2_name}= | Get interface name | ${dut2} | ${dut2_if2}
-| | Create Kubernetes VSWITCH startup config on all DUTs | ${get_framesize}
-| | ... | ${wt} | ${rxq}
-| | Create Kubernetes VNF'1' startup config on all DUTs
-| | Create Kubernetes VNF'2' startup config on all DUTs
-| | Create Kubernetes CM from file on all DUTs | ${nodes} | name=vswitch-vpp-cfg
-| | ... | key=vpp.conf | src_file=/tmp/vswitch.conf
-| | Create Kubernetes CM from file on all DUTs | ${nodes} | name=vnf1-vpp-cfg
-| | ... | key=vpp.conf | src_file=/tmp/vnf1.conf
-| | Create Kubernetes CM from file on all DUTs | ${nodes} | name=vnf2-vpp-cfg
-| | ... | key=vpp.conf | src_file=/tmp/vnf2.conf
-| | Apply Kubernetes resource on node | ${dut1}
-| | ... | ${kubernetes_profile}.yaml | $$TEST_NAME$$=${TEST NAME}
-| | ... | $$VSWITCH_IF1$$=${dut1_if1_name}
-| | ... | $$VSWITCH_IF2$$=${dut1_if2_name}
-| | Apply Kubernetes resource on node | ${dut2}
-| | ... | ${kubernetes_profile}.yaml | $$TEST_NAME$$=${TEST NAME}
-| | ... | $$VSWITCH_IF1$$=${dut2_if1_name}
-| | ... | $$VSWITCH_IF2$$=${dut2_if2_name}
-| | Wait for Kubernetes PODs on all DUTs | ${nodes}
-| | Run Keyword If | '${search_type}' == 'NDR'
-| | ... | Find NDR using binary search and pps
-| | ... | ${framesize} | ${binary_min} | ${binary_max} | ${traffic_profile}
-| | ... | ${min_rate} | ${max_rate} | ${threshold}
-| | ... | ELSE IF | '${search_type}' == 'PDR'
-| | ... | Find PDR using binary search and pps
-| | ... | ${framesize} | ${binary_min} | ${binary_max} | ${traffic_profile}
-| | ... | ${min_rate} | ${max_rate} | ${threshold}
-| | ... | ${perf_pdr_loss_acceptance} | ${perf_pdr_loss_acceptance_type}
-
-*** Test Cases ***
-| tc01-64B-1t1c-eth-l2bdbase-eth-2memif-2vnf-kubernetes-ndrdisc
-| | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core,\
-| | ... | 1 receive queue per NIC port.
-| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\
-| | ... | linerate, step 100kpps.
-| | ...
-| | [Tags] | 64B | 1T1C | STHREAD | NDRDISC
-| | [Template] | L2 Bridge Domain Binary Search
-| | framesize=${64} | min_rate=${100000} | wt=1 | rxq=1 | search_type=NDR
-
-| tc02-64B-1t1c-eth-l2bdbase-eth-2memif-2vnf-kubernetes-pdrdisc
-| | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core,\
-| | ... | 1 receive queue per NIC port.
-| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\
-| | ... | linerate, step 100kpps, LT=0.5%.
-| | ...
-| | [Tags] | 64B | 1T1C | STHREAD | PDRDISC
-| | [Template] | L2 Bridge Domain Binary Search
-| | framesize=${64} | min_rate=${100000} | wt=1 | rxq=1 | search_type=PDR
-
-| tc03-IMIX-1t1c-eth-l2bdbase-eth-2memif-2vnf-kubernetes-ndrdisc
-| | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core,\
-| | ... | 1 receive queue per NIC port.
-| | ... | [Ver] Find NDR for IMIX_v4_1 frames using binary search start at 10GE\
-| | ... | linerate, step 10kpps.
-| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B)
-| | ...
-| | [Tags] | IMIX | 1T1C | STHREAD | NDRDISC
-| | [Template] | L2 Bridge Domain Binary Search
-| | framesize=IMIX_v4_1 | min_rate=${10000} | wt=1 | rxq=1 | search_type=NDR
-
-| tc04-IMIX-1t1c-eth-l2bdbase-eth-2memif-2vnf-kubernetes-pdrdisc
-| | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core,\
-| | ... | 1 receive queue per NIC port.
-| | ... | [Ver] Find PDR for IMIX_v4_1 frames using binary search start at 10GE\
-| | ... | linerate, step 10kpps, LT=0.5%.
-| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B)
-| | ...
-| | [Tags] | IMIX | 1T1C | STHREAD | PDRDISC
-| | [Template] | L2 Bridge Domain Binary Search
-| | framesize=IMIX_v4_1 | min_rate=${10000} | wt=1 | rxq=1 | search_type=PDR
-
-| tc05-1518B-1t1c-eth-l2bdbase-eth-2memif-2vnf-kubernetes-ndrdisc
-| | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core,\
-| | ... | 1 receive queue per NIC port.
-| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\
-| | ... | linerate, step 10kpps.
-| | ...
-| | [Tags] | 1518B | 1T1C | STHREAD | NDRDISC
-| | [Template] | L2 Bridge Domain Binary Search
-| | framesize=${1518} | min_rate=${10000} | wt=1 | rxq=1 | search_type=NDR
-
-| tc06-1518B-1t1c-eth-l2bdbase-eth-2memif-2vnf-kubernetes-pdrdisc
-| | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core,\
-| | ... | 1 receive queue per NIC port.
-| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\
-| | ... | linerate, step 10kpps, LT=0.5%.
-| | ...
-| | [Tags] | 1518B | 1T1C | STHREAD | PDRDISC
-| | [Template] | L2 Bridge Domain Binary Search
-| | framesize=${1518} | min_rate=${10000} | wt=1 | rxq=1 | search_type=PDR
-
-| tc07-64B-2t2c-eth-l2bdbase-eth-2memif-2vnf-kubernetes-ndrdisc
-| | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config with 2 thread, 2 phy core,\
-| | ... | 1 receive queue per NIC port.
-| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\
-| | ... | linerate, step 100kpps.
-| | ...
-| | [Tags] | 64B | 2T2C | MTHREAD | NDRDISC
-| | [Template] | L2 Bridge Domain Binary Search
-| | framesize=${64} | min_rate=${100000} | wt=2 | rxq=1 | search_type=NDR
-
-| tc08-64B-2t2c-eth-l2bdbase-eth-2memif-2vnf-kubernetes-pdrdisc
-| | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config with 2 thread, 2 phy core,\
-| | ... | 1 receive queue per NIC port.
-| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\
-| | ... | linerate, step 100kpps, LT=0.5%.
-| | ...
-| | [Tags] | 64B | 2T2C | MTHREAD | PDRDISC
-| | [Template] | L2 Bridge Domain Binary Search
-| | framesize=${64} | min_rate=${100000} | wt=2 | rxq=1 | search_type=PDR
-
-| tc09-IMIX-2t2c-eth-l2bdbase-eth-2memif-2vnf-kubernetes-ndrdisc
-| | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config with 2 thread, 2 phy core,\
-| | ... | 1 receive queue per NIC port.
-| | ... | [Ver] Find NDR for IMIX_v4_1 frames using binary search start at 10GE\
-| | ... | linerate, step 10kpps.
-| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B)
-| | ...
-| | [Tags] | IMIX | 2T2C | MTHREAD | NDRDISC
-| | [Template] | L2 Bridge Domain Binary Search
-| | framesize=IMIX_v4_1 | min_rate=${10000} | wt=2 | rxq=1 | search_type=NDR
-
-| tc10-IMIX-2t2c-eth-l2bdbase-eth-2memif-2vnf-kubernetes-pdrdisc
-| | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config with 2 thread, 1 phy core,\
-| | ... | 1 receive queue per NIC port.
-| | ... | [Ver] Find PDR for IMIX_v4_1 frames using binary search start at 10GE\
-| | ... | linerate, step 10kpps, LT=0.5%.
-| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B)
-| | ...
-| | [Tags] | IMIX | 2T2C | MTHREAD | PDRDISC
-| | [Template] | L2 Bridge Domain Binary Search
-| | framesize=IMIX_v4_1 | min_rate=${10000} | wt=2 | rxq=1 | search_type=PDR
-
-| tc11-1518B-2t2c-eth-l2bdbase-eth-2memif-2vnf-kubernetes-ndrdisc
-| | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config with 2 thread, 1 phy core,\
-| | ... | 1 receive queue per NIC port.
-| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\
-| | ... | linerate, step 10kpps.
-| | ...
-| | [Tags] | 1518B | 2T2C | MTHREAD | NDRDISC
-| | [Template] | L2 Bridge Domain Binary Search
-| | framesize=${1518} | min_rate=${10000} | wt=2 | rxq=1 | search_type=NDR
-
-| tc12-1518B-2t2c-eth-l2bdbase-eth-2memif-2vnf-kubernetes-pdrdisc
-| | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config with 2 thread, 1 phy core,\
-| | ... | 1 receive queue per NIC port.
-| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\
-| | ... | linerate, step 10kpps, LT=0.5%.
-| | ...
-| | [Tags] | 1518B | 2T2C | MTHREAD | PDRDISC
-| | [Template] | L2 Bridge Domain Binary Search
-| | framesize=${1518} | min_rate=${10000} | wt=2 | rxq=1 | search_type=PDR
diff --git a/tests/ligato/perf/l2/10ge2p1x520-eth-l2xcbase-eth-2memif-1vnf-ndrpdrdisc.robot b/tests/ligato/perf/l2/10ge2p1x520-eth-l2xcbase-eth-2memif-1vnf-ndrpdrdisc.robot
deleted file mode 100644
index a21a1bfb88..0000000000
--- a/tests/ligato/perf/l2/10ge2p1x520-eth-l2xcbase-eth-2memif-1vnf-ndrpdrdisc.robot
+++ /dev/null
@@ -1,303 +0,0 @@
-# Copyright (c) 2017 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Resource | resources/libraries/robot/performance/performance_setup.robot
-| ...
-| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDRDISC
-| ... | NIC_Intel-X520-DA2 | ETH | L2XCFWD | BASE | L2XCBASE | MEMIF
-| ... | KUBERNETES | 1VSWITCH | 1VNF | VPP_AGENT | SFC_CONTROLLER
-| ...
-| Suite Setup | Set up 3-node performance topology with DUT's NIC model
-| ... | L2 | Intel-X520-DA2
-| ...
-| Test Setup | Run Keywords
-| ... | Apply Kubernetes resource on all duts | ${nodes} | kafka.yaml
-| ... | AND | Apply Kubernetes resource on all duts | ${nodes} | etcd.yaml
-| ...
-| Suite Teardown | Tear down 3-node performance topology
-| ...
-| Test Teardown | Run Keywords
-| ... | Get Kubernetes logs on all DUTs | ${nodes} | AND
-| ... | Describe Kubernetes resource on all DUTs | ${nodes} | AND
-| ... | Delete Kubernetes resource on all duts | ${nodes}
-| ...
-| Documentation | *RFC2544: Pkt throughput L2XC test cases*
-| ...
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 cross connect.
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 cross-
-| ... | connect. DUT1 and DUT2 tested with 2p10GE NIC X520 Niantic by Intel.
-| ... | VNF Container is connected to VSWITCH container via Memif interface. All
-| ... | containers is running same VPP version. Containers are deployed with
-| ... | Kubernetes. Configuration is applied by vnf-agent.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop
-| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage
-| ... | of packets transmitted. NDR and PDR are discovered for different
-| ... | Ethernet L2 frame sizes using either binary search or linear search
-| ... | algorithms with configured starting rate and final step that determines
-| ... | throughput measurement resolution. Test packets are generated by TG on
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups
-| ... | (flow-group per direction, 253 flows per flow-group) with all packets
-| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static
-| ... | payload. MAC addresses are matching MAC addresses of the TG node
-| ... | interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
-
-*** Variables ***
-| ${avg_imix_framesize}= | ${357.833}
-# X520-DA2 bandwidth limit
-| ${s_limit} | ${10000000000}
-# Kubernetes profile
-| ${kubernetes_profile} | eth-l2xcbase-eth-2memif-1vnf
-# Traffic profile:
-| ${traffic_profile} | trex-sl-3n-ethip4-ip4src254
-# CPU settings
-| ${system_cpus}= | ${1}
-| ${vswitch_cpus}= | ${5}
-| ${vnf_cpus}= | ${3}
-
-*** Keywords ***
-| Create Kubernetes VSWITCH startup config on all DUTs
-| | [Documentation] | Create base startup configuration of VSWITCH in Kubernetes
-| | ... | deploy to all DUTs.
-| | ...
-| | ... | *Arguments:*
-| | ... | - ${framesize} - L2 framesize. Type: integer
-| | ... | - ${wt} - Worker threads. Type: integer
-| | ... | - ${rxq} - RX queues. Type: integer
-| | ...
-| | ... | *Example:*
-| | ...
-| | ... | \| Create Kubernetes VSWITCH startup config on all DUTs \| ${64} \
-| | ... | \| ${1} \| ${1}
-| | ...
-| | [Arguments] | ${framesize} | ${wt} | ${rxq}
-| | ${dut1_numa}= | Get interfaces numa node | ${dut1}
-| | ... | ${dut1_if1} | ${dut1_if2}
-| | ${dut2_numa}= | Get interfaces numa node | ${dut2}
-| | ... | ${dut2_if1} | ${dut2_if2}
-| | ${dut1_if1_pci}= | Get Interface PCI Addr | ${dut1} | ${dut1_if1}
-| | ${dut1_if2_pci}= | Get Interface PCI Addr | ${dut1} | ${dut1_if2}
-| | ${dut2_if1_pci}= | Get Interface PCI Addr | ${dut2} | ${dut2_if1}
-| | ${dut2_if2_pci}= | Get Interface PCI Addr | ${dut2} | ${dut2_if2}
-| | ${cpu_cnt}= | Evaluate | ${wt}+1
-| | ${config}= | Run keyword | Create Kubernetes VSWITCH startup config
-| | ... | node=${dut1} | cpu_cnt=${cpu_cnt} | cpu_node=${dut1_numa}
-| | ... | cpu_skip=${system_cpus} | smt_used=${False}
-| | ... | filename=/tmp/vswitch.conf | framesize=${framesize} | rxq=${rxq}
-| | ... | if1=${dut1_if1_pci} | if2=${dut1_if2_pci}
-| | ${config}= | Run keyword | Create Kubernetes VSWITCH startup config
-| | ... | node=${dut2} | cpu_cnt=${cpu_cnt} | cpu_node=${dut2_numa}
-| | ... | cpu_skip=${system_cpus} | smt_used=${False}
-| | ... | filename=/tmp/vswitch.conf | framesize=${framesize} | rxq=${rxq}
-| | ... | if1=${dut2_if1_pci} | if2=${dut2_if2_pci}
-
-| Create Kubernetes VNF'${i}' startup config on all DUTs
-| | [Documentation] | Create base startup configuration of VNF in Kubernetes
-| | ... | deploy to all DUTs.
-| | ...
-| | ${i_int}= | Convert To Integer | ${i}
-| | ${cpu_skip}= | Evaluate | ${vswitch_cpus}+${system_cpus}
-| | ${dut1_numa}= | Get interfaces numa node | ${dut1}
-| | ... | ${dut1_if1} | ${dut1_if2}
-| | ${dut2_numa}= | Get interfaces numa node | ${dut2}
-| | ... | ${dut2_if1} | ${dut2_if2}
-| | ${config}= | Run keyword | Create Kubernetes VNF startup config
-| | ... | node=${dut1} | cpu_cnt=${vnf_cpus} | cpu_node=${dut1_numa}
-| | ... | cpu_skip=${cpu_skip} | smt_used=${False} | filename=/tmp/vnf${i}.conf
-| | ... | i=${i_int}
-| | ${config}= | Run keyword | Create Kubernetes VNF startup config
-| | ... | node=${dut2} | cpu_cnt=${vnf_cpus} | cpu_node=${dut2_numa}
-| | ... | cpu_skip=${cpu_skip} | smt_used=${False} | filename=/tmp/vnf${i}.conf
-| | ... | i=${i_int}
-
-| L2 Cross Connect Binary Search
-| | [Arguments] | ${framesize} | ${min_rate} | ${wt} | ${rxq} | ${search_type}
-| | Set Test Variable | ${framesize}
-| | Set Test Variable | ${min_rate}
-| | ${get_framesize}= | Set Variable If
-| | ... | "${framesize}" == "IMIX_v4_1" | ${avg_imix_framesize} | ${framesize}
-| | ${max_rate}= | Calculate pps | ${s_limit} | ${get_framesize}
-| | ${binary_min}= | Set Variable | ${min_rate}
-| | ${binary_max}= | Set Variable | ${max_rate}
-| | ${threshold}= | Set Variable | ${min_rate}
-| | ${dut1_if1_name}= | Get interface name | ${dut1} | ${dut1_if1}
-| | ${dut1_if2_name}= | Get interface name | ${dut1} | ${dut1_if2}
-| | ${dut2_if1_name}= | Get interface name | ${dut2} | ${dut2_if1}
-| | ${dut2_if2_name}= | Get interface name | ${dut2} | ${dut2_if2}
-| | Create Kubernetes VSWITCH startup config on all DUTs | ${get_framesize}
-| | ... | ${wt} | ${rxq}
-| | Create Kubernetes VNF'1' startup config on all DUTs
-| | Create Kubernetes CM from file on all DUTs | ${nodes} | name=vswitch-vpp-cfg
-| | ... | key=vpp.conf | src_file=/tmp/vswitch.conf
-| | Create Kubernetes CM from file on all DUTs | ${nodes} | name=vnf-vpp-cfg
-| | ... | key=vpp.conf | src_file=/tmp/vnf1.conf
-| | Apply Kubernetes resource on node | ${dut1}
-| | ... | ${kubernetes_profile}.yaml | $$TEST_NAME$$=${TEST NAME}
-| | ... | $$VSWITCH_IF1$$=${dut1_if1_name}
-| | ... | $$VSWITCH_IF2$$=${dut1_if2_name}
-| | Apply Kubernetes resource on node | ${dut2}
-| | ... | ${kubernetes_profile}.yaml | $$TEST_NAME$$=${TEST NAME}
-| | ... | $$VSWITCH_IF1$$=${dut2_if1_name}
-| | ... | $$VSWITCH_IF2$$=${dut2_if2_name}
-| | Wait for Kubernetes PODs on all DUTs | ${nodes}
-| | Describe Kubernetes resource on all DUTs | ${nodes}
-| | Run Keyword If | '${search_type}' == 'NDR'
-| | ... | Find NDR using binary search and pps
-| | ... | ${framesize} | ${binary_min} | ${binary_max} | ${traffic_profile}
-| | ... | ${min_rate} | ${max_rate} | ${threshold}
-| | ... | ELSE IF | '${search_type}' == 'PDR'
-| | ... | Find PDR using binary search and pps
-| | ... | ${framesize} | ${binary_min} | ${binary_max} | ${traffic_profile}
-| | ... | ${min_rate} | ${max_rate} | ${threshold}
-| | ... | ${perf_pdr_loss_acceptance} | ${perf_pdr_loss_acceptance_type}
-
-*** Test Cases ***
-| tc01-64B-1t1c-eth-l2xcbase-eth-2memif-1vnf-kubernetes-ndrdisc
-| | [Documentation]
-| | ... | [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core,\
-| | ... | 1 receive queue per NIC port.
-| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\
-| | ... | linerate, step 100kpps.
-| | ...
-| | [Tags] | 64B | 1T1C | STHREAD | NDRDISC
-| | [Template] | L2 Cross Connect Binary Search
-| | framesize=${64} | min_rate=${100000} | wt=1 | rxq=1 | search_type=NDR
-
-| tc02-64B-1t1c-eth-l2xcbase-eth-2memif-1vnf-kubernetes-pdrdisc
-| | [Documentation]
-| | ... | [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core,\
-| | ... | 1 receive queue per NIC port.
-| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\
-| | ... | linerate, step 100kpps, LT=0.5%.
-| | ...
-| | [Tags] | 64B | 1T1C | STHREAD | PDRDISC
-| | [Template] | L2 Cross Connect Binary Search
-| | framesize=${64} | min_rate=${100000} | wt=1 | rxq=1 | search_type=PDR
-
-| tc03-IMIX-1t1c-eth-l2xcbase-eth-2memif-1vnf-kubernetes-ndrdisc
-| | [Documentation]
-| | ... | [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core,\
-| | ... | 1 receive queue per NIC port.
-| | ... | [Ver] Find NDR for IMIX_v4_1 frames using binary search start at 10GE\
-| | ... | linerate, step 10kpps.
-| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B)
-| | ...
-| | [Tags] | IMIX | 1T1C | STHREAD | NDRDISC
-| | [Template] | L2 Cross Connect Binary Search
-| | framesize=IMIX_v4_1 | min_rate=${10000} | wt=1 | rxq=1 | search_type=NDR
-
-| tc04-IMIX-1t1c-eth-l2xcbase-eth-2memif-1vnf-kubernetes-pdrdisc
-| | [Documentation]
-| | ... | [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core,\
-| | ... | 1 receive queue per NIC port.
-| | ... | [Ver] Find PDR for IMIX_v4_1 frames using binary search start at 10GE\
-| | ... | linerate, step 10kpps, LT=0.5%.
-| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B)
-| | ...
-| | [Tags] | IMIX | 1T1C | STHREAD | PDRDISC
-| | [Template] | L2 Cross Connect Binary Search
-| | framesize=IMIX_v4_1 | min_rate=${10000} | wt=1 | rxq=1 | search_type=PDR
-
-| tc05-1518B-1t1c-eth-l2xcbase-eth-2memif-1vnf-kubernetes-ndrdisc
-| | [Documentation]
-| | ... | [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core,\
-| | ... | 1 receive queue per NIC port.
-| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\
-| | ... | linerate, step 10kpps.
-| | ...
-| | [Tags] | 1518B | 1T1C | STHREAD | NDRDISC
-| | [Template] | L2 Cross Connect Binary Search
-| | framesize=${1518} | min_rate=${10000} | wt=1 | rxq=1 | search_type=NDR
-
-| tc06-1518B-1t1c-eth-l2xcbase-eth-2memif-1vnf-kubernetes-pdrdisc
-| | [Documentation]
-| | ... | [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core,\
-| | ... | 1 receive queue per NIC port.
-| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\
-| | ... | linerate, step 10kpps, LT=0.5%.
-| | ...
-| | [Tags] | 1518B | 1T1C | STHREAD | PDRDISC
-| | [Template] | L2 Cross Connect Binary Search
-| | framesize=${1518} | min_rate=${10000} | wt=1 | rxq=1 | search_type=PDR
-
-| tc07-64B-2t2c-eth-l2xcbase-eth-2memif-1vnf-kubernetes-ndrdisc
-| | [Documentation]
-| | ... | [Cfg] DUT runs L2XC switching config with 2 thread, 2 phy core,\
-| | ... | 1 receive queue per NIC port.
-| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\
-| | ... | linerate, step 100kpps.
-| | ...
-| | [Tags] | 64B | 2T2C | MTHREAD | NDRDISC
-| | [Template] | L2 Cross Connect Binary Search
-| | framesize=${64} | min_rate=${100000} | wt=2 | rxq=1 | search_type=NDR
-
-| tc08-64B-2t2c-eth-l2xcbase-eth-2memif-1vnf-kubernetes-pdrdisc
-| | [Documentation]
-| | ... | [Cfg] DUT runs L2XC switching config with 2 thread, 2 phy core,\
-| | ... | 1 receive queue per NIC port.
-| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\
-| | ... | linerate, step 100kpps, LT=0.5%.
-| | ...
-| | [Tags] | 64B | 2T2C | MTHREAD | PDRDISC
-| | [Template] | L2 Cross Connect Binary Search
-| | framesize=${64} | min_rate=${100000} | wt=2 | rxq=1 | search_type=PDR
-
-| tc09-IMIX-2t2c-eth-l2xcbase-eth-2memif-1vnf-kubernetes-ndrdisc
-| | [Documentation]
-| | ... | [Cfg] DUT runs L2XC switching config with 2 thread, 2 phy core,\
-| | ... | 1 receive queue per NIC port.
-| | ... | [Ver] Find NDR for IMIX_v4_1 frames using binary search start at 10GE\
-| | ... | linerate, step 10kpps.
-| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B)
-| | ...
-| | [Tags] | IMIX | 2T2C | MTHREAD | NDRDISC
-| | [Template] | L2 Cross Connect Binary Search
-| | framesize=IMIX_v4_1 | min_rate=${10000} | wt=2 | rxq=1 | search_type=NDR
-
-| tc10-IMIX-2t2c-eth-l2xcbase-eth-2memif-1vnf-kubernetes-pdrdisc
-| | [Documentation]
-| | ... | [Cfg] DUT runs L2XC switching config with 2 thread, 1 phy core,\
-| | ... | 1 receive queue per NIC port.
-| | ... | [Ver] Find PDR for IMIX_v4_1 frames using binary search start at 10GE\
-| | ... | linerate, step 10kpps, LT=0.5%.
-| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B)
-| | ...
-| | [Tags] | IMIX | 2T2C | MTHREAD | PDRDISC
-| | [Template] | L2 Cross Connect Binary Search
-| | framesize=IMIX_v4_1 | min_rate=${10000} | wt=2 | rxq=1 | search_type=PDR
-
-| tc11-1518B-2t2c-eth-l2xcbase-eth-2memif-1vnf-kubernetes-ndrdisc
-| | [Documentation]
-| | ... | [Cfg] DUT runs L2XC switching config with 2 thread, 1 phy core,\
-| | ... | 1 receive queue per NIC port.
-| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\
-| | ... | linerate, step 10kpps.
-| | ...
-| | [Tags] | 1518B | 2T2C | MTHREAD | NDRDISC
-| | [Template] | L2 Cross Connect Binary Search
-| | framesize=${1518} | min_rate=${10000} | wt=2 | rxq=1 | search_type=NDR
-
-| tc12-1518B-2t2c-eth-l2xcbase-eth-2memif-1vnf-kubernetes-pdrdisc
-| | [Documentation]
-| | ... | [Cfg] DUT runs L2XC switching config with 2 thread, 1 phy core,\
-| | ... | 1 receive queue per NIC port.
-| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\
-| | ... | linerate, step 10kpps, LT=0.5%.
-| | ...
-| | [Tags] | 1518B | 2T2C | MTHREAD | PDRDISC
-| | [Template] | L2 Cross Connect Binary Search
-| | framesize=${1518} | min_rate=${10000} | wt=2 | rxq=1 | search_type=PDR
diff --git a/tests/ligato/perf/l2/10ge2p1x520-eth-l2xcbase-eth-2memif-2vnf-ndrpdrdisc.robot b/tests/ligato/perf/l2/10ge2p1x520-eth-l2xcbase-eth-2memif-2vnf-ndrpdrdisc.robot
deleted file mode 100644
index 791e24d5e5..0000000000
--- a/tests/ligato/perf/l2/10ge2p1x520-eth-l2xcbase-eth-2memif-2vnf-ndrpdrdisc.robot
+++ /dev/null
@@ -1,306 +0,0 @@
-# Copyright (c) 2017 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Resource | resources/libraries/robot/performance/performance_setup.robot
-| ...
-| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDRDISC
-| ... | NIC_Intel-X520-DA2 | ETH | L2XCFWD | SCALE | L2XCBASE | MEMIF
-| ... | KUBERNETES | 1VSWITCH | 2VNF | VPP_AGENT | SFC_CONTROLLER
-| ...
-| Suite Setup | Set up 3-node performance topology with DUT's NIC model
-| ... | L2 | Intel-X520-DA2
-| ...
-| Test Setup | Run Keywords
-| ... | Apply Kubernetes resource on all duts | ${nodes} | kafka.yaml
-| ... | AND | Apply Kubernetes resource on all duts | ${nodes} | etcd.yaml
-| ...
-| Suite Teardown | Tear down 3-node performance topology
-| ...
-| Test Teardown | Run Keywords
-| ... | Get Kubernetes logs on all DUTs | ${nodes} | AND
-| ... | Describe Kubernetes resource on all DUTs | ${nodes} | AND
-| ... | Delete Kubernetes resource on all duts | ${nodes}
-| ...
-| Documentation | *RFC2544: Pkt throughput L2XC test cases*
-| ...
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 cross connect.
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 cross-
-| ... | connect. DUT1 and DUT2 tested with 2p10GE NIC X520 Niantic by Intel.
-| ... | VNF Containers are connected to VSWITCH container via Memif interface.
-| ... | All containers are running same VPP version. Containers are deployed
-| ... | with Kubernetes. Configuration is applied by vnf-agent.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop
-| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage
-| ... | of packets transmitted. NDR and PDR are discovered for different
-| ... | Ethernet L2 frame sizes using either binary search or linear search
-| ... | algorithms with configured starting rate and final step that determines
-| ... | throughput measurement resolution. Test packets are generated by TG on
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups
-| ... | (flow-group per direction, 253 flows per flow-group) with all packets
-| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static
-| ... | payload. MAC addresses are matching MAC addresses of the TG node
-| ... | interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
-
-*** Variables ***
-| ${avg_imix_framesize}= | ${357.833}
-# X520-DA2 bandwidth limit
-| ${s_limit} | ${10000000000}
-# Kubernetes profile
-| ${kubernetes_profile} | eth-l2xcbase-eth-2memif-2vnf
-# Traffic profile:
-| ${traffic_profile} | trex-sl-3n-ethip4-ip4src254
-# CPU settings
-| ${system_cpus}= | ${1}
-| ${vswitch_cpus}= | ${5}
-| ${vnf_cpus}= | ${3}
-
-*** Keywords ***
-| Create Kubernetes VSWITCH startup config on all DUTs
-| | [Documentation] | Create base startup configuration of VSWITCH in Kubernetes
-| | ... | deploy to all DUTs.
-| | ...
-| | ... | *Arguments:*
-| | ... | - ${framesize} - L2 framesize. Type: integer
-| | ... | - ${wt} - Worker threads. Type: integer
-| | ... | - ${rxq} - RX queues. Type: integer
-| | ...
-| | ... | *Example:*
-| | ...
-| | ... | \| Create Kubernetes VSWITCH startup config on all DUTs \| ${64} \
-| | ... | \| ${1} \| ${1}
-| | ...
-| | [Arguments] | ${framesize} | ${wt} | ${rxq}
-| | ${dut1_numa}= | Get interfaces numa node | ${dut1}
-| | ... | ${dut1_if1} | ${dut1_if2}
-| | ${dut2_numa}= | Get interfaces numa node | ${dut2}
-| | ... | ${dut2_if1} | ${dut2_if2}
-| | ${dut1_if1_pci}= | Get Interface PCI Addr | ${dut1} | ${dut1_if1}
-| | ${dut1_if2_pci}= | Get Interface PCI Addr | ${dut1} | ${dut1_if2}
-| | ${dut2_if1_pci}= | Get Interface PCI Addr | ${dut2} | ${dut2_if1}
-| | ${dut2_if2_pci}= | Get Interface PCI Addr | ${dut2} | ${dut2_if2}
-| | ${cpu_cnt}= | Evaluate | ${wt}+1
-| | ${config}= | Run keyword | Create Kubernetes VSWITCH startup config
-| | ... | node=${dut1} | cpu_cnt=${cpu_cnt} | cpu_node=${dut1_numa}
-| | ... | cpu_skip=${system_cpus} | smt_used=${False}
-| | ... | filename=/tmp/vswitch.conf | framesize=${framesize} | rxq=${rxq}
-| | ... | if1=${dut1_if1_pci} | if2=${dut1_if2_pci}
-| | ${config}= | Run keyword | Create Kubernetes VSWITCH startup config
-| | ... | node=${dut2} | cpu_cnt=${cpu_cnt} | cpu_node=${dut2_numa}
-| | ... | cpu_skip=${system_cpus} | smt_used=${False}
-| | ... | filename=/tmp/vswitch.conf | framesize=${framesize} | rxq=${rxq}
-| | ... | if1=${dut2_if1_pci} | if2=${dut2_if2_pci}
-
-| Create Kubernetes VNF'${i}' startup config on all DUTs
-| | [Documentation] | Create base startup configuration of VNF in Kubernetes
-| | ... | deploy to all DUTs.
-| | ...
-| | ${i_int}= | Convert To Integer | ${i}
-| | ${cpu_skip}= | Evaluate | ${vswitch_cpus}+${system_cpus}
-| | ${dut1_numa}= | Get interfaces numa node | ${dut1}
-| | ... | ${dut1_if1} | ${dut1_if2}
-| | ${dut2_numa}= | Get interfaces numa node | ${dut2}
-| | ... | ${dut2_if1} | ${dut2_if2}
-| | ${config}= | Run keyword | Create Kubernetes VNF startup config
-| | ... | node=${dut1} | cpu_cnt=${vnf_cpus} | cpu_node=${dut1_numa}
-| | ... | cpu_skip=${cpu_skip} | smt_used=${False} | filename=/tmp/vnf${i}.conf
-| | ... | i=${i_int}
-| | ${config}= | Run keyword | Create Kubernetes VNF startup config
-| | ... | node=${dut2} | cpu_cnt=${vnf_cpus} | cpu_node=${dut2_numa}
-| | ... | cpu_skip=${cpu_skip} | smt_used=${False} | filename=/tmp/vnf${i}.conf
-| | ... | i=${i_int}
-
-| L2 Cross Connect Binary Search
-| | [Arguments] | ${framesize} | ${min_rate} | ${wt} | ${rxq} | ${search_type}
-| | Set Test Variable | ${framesize}
-| | Set Test Variable | ${min_rate}
-| | ${get_framesize}= | Set Variable If
-| | ... | "${framesize}" == "IMIX_v4_1" | ${avg_imix_framesize} | ${framesize}
-| | ${max_rate}= | Calculate pps | ${s_limit} | ${get_framesize}
-| | ${binary_min}= | Set Variable | ${min_rate}
-| | ${binary_max}= | Set Variable | ${max_rate}
-| | ${threshold}= | Set Variable | ${min_rate}
-| | ${dut1_if1_name}= | Get interface name | ${dut1} | ${dut1_if1}
-| | ${dut1_if2_name}= | Get interface name | ${dut1} | ${dut1_if2}
-| | ${dut2_if1_name}= | Get interface name | ${dut2} | ${dut2_if1}
-| | ${dut2_if2_name}= | Get interface name | ${dut2} | ${dut2_if2}
-| | Create Kubernetes VSWITCH startup config on all DUTs | ${get_framesize}
-| | ... | ${wt} | ${rxq}
-| | Create Kubernetes VNF'1' startup config on all DUTs
-| | Create Kubernetes VNF'2' startup config on all DUTs
-| | Create Kubernetes CM from file on all DUTs | ${nodes} | name=vswitch-vpp-cfg
-| | ... | key=vpp.conf | src_file=/tmp/vswitch.conf
-| | Create Kubernetes CM from file on all DUTs | ${nodes} | name=vnf1-vpp-cfg
-| | ... | key=vpp.conf | src_file=/tmp/vnf1.conf
-| | Create Kubernetes CM from file on all DUTs | ${nodes} | name=vnf2-vpp-cfg
-| | ... | key=vpp.conf | src_file=/tmp/vnf2.conf
-| | Apply Kubernetes resource on node | ${dut1}
-| | ... | ${kubernetes_profile}.yaml | $$TEST_NAME$$=${TEST NAME}
-| | ... | $$VSWITCH_IF1$$=${dut1_if1_name}
-| | ... | $$VSWITCH_IF2$$=${dut1_if2_name}
-| | Apply Kubernetes resource on node | ${dut2}
-| | ... | ${kubernetes_profile}.yaml | $$TEST_NAME$$=${TEST NAME}
-| | ... | $$VSWITCH_IF1$$=${dut2_if1_name}
-| | ... | $$VSWITCH_IF2$$=${dut2_if2_name}
-| | Wait for Kubernetes PODs on all DUTs | ${nodes}
-| | Describe Kubernetes resource on all DUTs | ${nodes}
-| | Run Keyword If | '${search_type}' == 'NDR'
-| | ... | Find NDR using binary search and pps
-| | ... | ${framesize} | ${binary_min} | ${binary_max} | ${traffic_profile}
-| | ... | ${min_rate} | ${max_rate} | ${threshold}
-| | ... | ELSE IF | '${search_type}' == 'PDR'
-| | ... | Find PDR using binary search and pps
-| | ... | ${framesize} | ${binary_min} | ${binary_max} | ${traffic_profile}
-| | ... | ${min_rate} | ${max_rate} | ${threshold}
-| | ... | ${perf_pdr_loss_acceptance} | ${perf_pdr_loss_acceptance_type}
-
-*** Test Cases ***
-| tc01-64B-1t1c-eth-l2xcbase-eth-2memif-1vnf-kubernetes-ndrdisc
-| | [Documentation]
-| | ... | [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core,\
-| | ... | 1 receive queue per NIC port.
-| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\
-| | ... | linerate, step 100kpps.
-| | ...
-| | [Tags] | 64B | 1T1C | STHREAD | NDRDISC
-| | [Template] | L2 Cross Connect Binary Search
-| | framesize=${64} | min_rate=${100000} | wt=1 | rxq=1 | search_type=NDR
-
-| tc02-64B-1t1c-eth-l2xcbase-eth-2memif-1vnf-kubernetes-pdrdisc
-| | [Documentation]
-| | ... | [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core,\
-| | ... | 1 receive queue per NIC port.
-| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\
-| | ... | linerate, step 100kpps, LT=0.5%.
-| | ...
-| | [Tags] | 64B | 1T1C | STHREAD | PDRDISC
-| | [Template] | L2 Cross Connect Binary Search
-| | framesize=${64} | min_rate=${100000} | wt=1 | rxq=1 | search_type=PDR
-
-| tc03-IMIX-1t1c-eth-l2xcbase-eth-2memif-1vnf-kubernetes-ndrdisc
-| | [Documentation]
-| | ... | [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core,\
-| | ... | 1 receive queue per NIC port.
-| | ... | [Ver] Find NDR for IMIX_v4_1 frames using binary search start at 10GE\
-| | ... | linerate, step 10kpps.
-| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B)
-| | ...
-| | [Tags] | IMIX | 1T1C | STHREAD | NDRDISC
-| | [Template] | L2 Cross Connect Binary Search
-| | framesize=IMIX_v4_1 | min_rate=${10000} | wt=1 | rxq=1 | search_type=NDR
-
-| tc04-IMIX-1t1c-eth-l2xcbase-eth-2memif-1vnf-kubernetes-pdrdisc
-| | [Documentation]
-| | ... | [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core,\
-| | ... | 1 receive queue per NIC port.
-| | ... | [Ver] Find PDR for IMIX_v4_1 frames using binary search start at 10GE\
-| | ... | linerate, step 10kpps, LT=0.5%.
-| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B)
-| | ...
-| | [Tags] | IMIX | 1T1C | STHREAD | PDRDISC
-| | [Template] | L2 Cross Connect Binary Search
-| | framesize=IMIX_v4_1 | min_rate=${10000} | wt=1 | rxq=1 | search_type=PDR
-
-| tc05-1518B-1t1c-eth-l2xcbase-eth-2memif-1vnf-kubernetes-ndrdisc
-| | [Documentation]
-| | ... | [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core,\
-| | ... | 1 receive queue per NIC port.
-| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\
-| | ... | linerate, step 10kpps.
-| | ...
-| | [Tags] | 1518B | 1T1C | STHREAD | NDRDISC
-| | [Template] | L2 Cross Connect Binary Search
-| | framesize=${1518} | min_rate=${10000} | wt=1 | rxq=1 | search_type=NDR
-
-| tc06-1518B-1t1c-eth-l2xcbase-eth-2memif-1vnf-kubernetes-pdrdisc
-| | [Documentation]
-| | ... | [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core,\
-| | ... | 1 receive queue per NIC port.
-| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\
-| | ... | linerate, step 10kpps, LT=0.5%.
-| | ...
-| | [Tags] | 1518B | 1T1C | STHREAD | PDRDISC
-| | [Template] | L2 Cross Connect Binary Search
-| | framesize=${1518} | min_rate=${10000} | wt=1 | rxq=1 | search_type=PDR
-
-| tc07-64B-2t2c-eth-l2xcbase-eth-2memif-1vnf-kubernetes-ndrdisc
-| | [Documentation]
-| | ... | [Cfg] DUT runs L2XC switching config with 2 thread, 2 phy core,\
-| | ... | 1 receive queue per NIC port.
-| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\
-| | ... | linerate, step 100kpps.
-| | ...
-| | [Tags] | 64B | 2T2C | MTHREAD | NDRDISC
-| | [Template] | L2 Cross Connect Binary Search
-| | framesize=${64} | min_rate=${100000} | wt=2 | rxq=1 | search_type=NDR
-
-| tc08-64B-2t2c-eth-l2xcbase-eth-2memif-1vnf-kubernetes-pdrdisc
-| | [Documentation]
-| | ... | [Cfg] DUT runs L2XC switching config with 2 thread, 2 phy core,\
-| | ... | 1 receive queue per NIC port.
-| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\
-| | ... | linerate, step 100kpps, LT=0.5%.
-| | ...
-| | [Tags] | 64B | 2T2C | MTHREAD | PDRDISC
-| | [Template] | L2 Cross Connect Binary Search
-| | framesize=${64} | min_rate=${100000} | wt=2 | rxq=1 | search_type=PDR
-
-| tc09-IMIX-2t2c-eth-l2xcbase-eth-2memif-1vnf-kubernetes-ndrdisc
-| | [Documentation]
-| | ... | [Cfg] DUT runs L2XC switching config with 2 thread, 2 phy core,\
-| | ... | 1 receive queue per NIC port.
-| | ... | [Ver] Find NDR for IMIX_v4_1 frames using binary search start at 10GE\
-| | ... | linerate, step 10kpps.
-| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B)
-| | ...
-| | [Tags] | IMIX | 2T2C | MTHREAD | NDRDISC
-| | [Template] | L2 Cross Connect Binary Search
-| | framesize=IMIX_v4_1 | min_rate=${10000} | wt=2 | rxq=1 | search_type=NDR
-
-| tc10-IMIX-2t2c-eth-l2xcbase-eth-2memif-1vnf-kubernetes-pdrdisc
-| | [Documentation]
-| | ... | [Cfg] DUT runs L2XC switching config with 2 thread, 1 phy core,\
-| | ... | 1 receive queue per NIC port.
-| | ... | [Ver] Find PDR for IMIX_v4_1 frames using binary search start at 10GE\
-| | ... | linerate, step 10kpps, LT=0.5%.
-| | ... | IMIX_v4_1 = (28x64B;16x570B;4x1518B)
-| | ...
-| | [Tags] | IMIX | 2T2C | MTHREAD | PDRDISC
-| | [Template] | L2 Cross Connect Binary Search
-| | framesize=IMIX_v4_1 | min_rate=${10000} | wt=2 | rxq=1 | search_type=PDR
-
-| tc11-1518B-2t2c-eth-l2xcbase-eth-2memif-1vnf-kubernetes-ndrdisc
-| | [Documentation]
-| | ... | [Cfg] DUT runs L2XC switching config with 2 thread, 1 phy core,\
-| | ... | 1 receive queue per NIC port.
-| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\
-| | ... | linerate, step 10kpps.
-| | ...
-| | [Tags] | 1518B | 2T2C | MTHREAD | NDRDISC
-| | [Template] | L2 Cross Connect Binary Search
-| | framesize=${1518} | min_rate=${10000} | wt=2 | rxq=1 | search_type=NDR
-
-| tc12-1518B-2t2c-eth-l2xcbase-eth-2memif-1vnf-kubernetes-pdrdisc
-| | [Documentation]
-| | ... | [Cfg] DUT runs L2XC switching config with 2 thread, 1 phy core,\
-| | ... | 1 receive queue per NIC port.
-| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\
-| | ... | linerate, step 10kpps, LT=0.5%.
-| | ...
-| | [Tags] | 1518B | 2T2C | MTHREAD | PDRDISC
-| | [Template] | L2 Cross Connect Binary Search
-| | framesize=${1518} | min_rate=${10000} | wt=2 | rxq=1 | search_type=PDR